Info: http://wiki.openwrt.org/doc/uci/wireless#wpa.enterprise.access.point
configuration: /etc/config# cat wireless config wifi-device 'radio0' option type 'mac80211' option phy 'phy0' option hwmode '11ng' option noscan '1' option disabled '0' option diversity '0' option rxantenna '2' option txantenna '2' option txpower '20' option beacon_int '1000' option distance '2000' list ht_capab 'RX-HT40-SGI' list ht_capab 'TX-STBC' list ht_capab 'RX-STBC1' list ht_capab 'DSSS_CCK-40' option channel '1' option country 'PT' option htmode 'HT20' option beacon_int '1000' config wifi-iface option device 'radio0' option ifname 'wlan0' option network 'lan' option mode 'ap' option ssid 'test.net' option hidden '0' option encryption 'none' config wifi-iface option device 'radio0' option ifname 'adhoc0' option network 'mesh' option mode 'adhoc' option bssid '02:16:e8:6a:0b:1e' option ssid 'mesh.test' option hidden '0' option macfilter 'allow' option encryption 'psk2' option key '1234567890' Problem: wifi down wifi up command failed: Device or resource busy (-16) Configuration file: /var/run/hostapd-phy0.conf Using interface wlan0 with hwaddr 5f:e9:98:5c:3e:36 and ssid "test.net" Successfully initialized wpa_supplicant Line 12: unknown network field 'beacon_interval'. Line 33: failed to parse network block. Failed to read or parse configuration '/var/run/wpa_supplicant-adhoc0.conf'. enable_mac80211(radio0): Failed to set up wpa_supplicant for interface adhoc0 Details: # cat /var/run/wpa_supplicant-adhoc0.conf ctrl_interface=/var/run/wpa_supplicant-adhoc0 ap_scan=2 network={ mode=1 scan_ssid=0 ssid="mesh.test" bssid=02:16:c8:6e:0f:1e key_mgmt=WPA-PSK proto=RSN frequency=2472 fixed_freq=1 beacon_interval=1000 htmode=HT20 psk="1234567890" Linux version 3.3.8 (cmsv@net) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Thu Jun 27 22:23:26 EDT 2013 DISTRIB_ID="OpenWrt" DISTRIB_RELEASE="Attitude Adjustment" DISTRIB_REVISION="r37034" DISTRIB_CODENAME="attitude_adjustment" DISTRIB_TARGET="ar71xx/generic" DISTRIB_DESCRIPTION="OpenWrt Attitude Adjustment 12.09" Conclusion: It does seem that wpa_supplicant is not compatible with option beacon_int . However if i remove this option from the configuration or specify it as option beacon_interval; then wpa_supplicant works for the specified interface. Is this a bug, incompatibility or something was not updated to work with with wpa_supplicant ? Also; will this option work if specified as beacon_interval in /et/config/wireless ? The wiki describes it as beacon_int -- Site: http://wirelesspt.net Mesh: http://tinyurl.com/wirelesspt Admin: http://wirelesspt.net/wiki/Cmsv Twitter: http://twitter.com/wirelesspt Suporte técnico via sms: 91 19 11 798 Donativos/Paypal: http://tinyurl.com/doar-verba Chave publica PGP/SSH: http://wirelesspt.net/arquivos/pk Email assinado digitalmente pelo emissor assegurando autenticidade
0x782BF73E.asc
Description: application/pgp-keys
signature.asc
Description: OpenPGP digital signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel