Re: [PATCH v2] uqmi: fix network registration loop
On 10-05-21, Florian Eckert wrote: > > > On 2021-05-08 12:33, Baptiste Jonglez wrote: > > Applied, thanks. > > > > Does this need to be backported to 21.02 or even 19.07? > > yes that would not be bad at least for openwrt-21.02 > On openwrt-19.07 there are additional commits needed. Ok, then I won't touch 19.07, unless uqmi support is really broken. I've backported this patch to 21.02. > Thanks for take care > > > > > Baptiste > > > > On 20-04-21, thomas.rich...@kontron.com wrote: > > > From: Thomas Richard > > > > > > With some debug in qmi.sh using following patch, some errors are > > > visible > > > in the registration step > > > @@ -29,6 +29,7 @@ proto_qmi_init_config() { > > > } > > > > > > proto_qmi_setup() { > > > + set -x > > > local interface="$1" > > > local dataformat connstat plmn_mode mcc mnc > > > local device apn auth username password pincode delay modes > > > pdptype > > > @@ -224,6 +225,8 @@ proto_qmi_setup() { > > > fi > > > done > > > > > > + registration=$(uqmi -s -d "$device" --get-serving-system) > > > + > > > [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes > > > "$modes" > /dev/null 2>&1 > > > > > > echo "Starting network $interface" > > > > > > During the boot of the system, modem could not start automatically its > > > network registration. > > > netifd: wan (9235): + echo 'Waiting for network registration' > > > netifd: wan (9235): Waiting for network registration > > > netifd: wan (9235): + local 'registration_timeout=0' > > > netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system > > > netifd: wan (9235): + grep '"searching"' > > > netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system > > > netifd: wan (9235): + > > > registration='{"registration":"not_registered","plmn_mcc":208,"plmn_mnc":20,"plmn_description":"","roaming":true}' > > > netifd: wan (9235): + '[' -n ] > > > netifd: wan (9235): + echo 'Starting network wan' > > > > > > As the while loop checks only "searching" pattern, uqmi.sh script > > > quits > > > searching loop and continues whereas the modem is not registered > > > > > > Other issue, after X seconds modem stops searching. > > > netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system > > > netifd: wan (9213): + grep '"searching"' > > > netifd: wan (9213): + '[' -e /dev/cdc-wdm0 ] > > > netifd: wan (9213): + '[' 3 -lt 0 -o 0 '=' 0 ] > > > netifd: wan (9213): + let registration_timeout++ > > > netifd: wan (9213): + sleep 1 > > > netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system > > > netifd: wan (9213): + grep '"searching"' > > > netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system > > > netifd: wan (9213): + registration='{"registration":"not_registered"}' > > > netifd: wan (9213): + '[' -n ] > > > netifd: wan (9213): + echo 'Starting network wan' > > > netifd: wan (9213): Starting network wan > > > > > > If registration_timeout is not expired, registration can be restarted > > > > > > Signed-off-by: Thomas Richard > > > --- > > > package/network/utils/uqmi/Makefile| 2 +- > > > .../utils/uqmi/files/lib/netifd/proto/qmi.sh | 35 > > > -- > > > 2 files changed, 27 insertions(+), 10 deletions(-) > > > > > > diff --git a/package/network/utils/uqmi/Makefile > > > b/package/network/utils/uqmi/Makefile > > > index 68958a3729..da54ba0f46 100644 > > > --- a/package/network/utils/uqmi/Makefile > > > +++ b/package/network/utils/uqmi/Makefile > > > @@ -1,7 +1,7 @@ > > > include $(TOPDIR)/rules.mk > > > > > > PKG_NAME:=uqmi > > > -PKG_RELEASE:=2 > > > +PKG_RELEASE:=3 > > > > > > PKG_SOURCE_PROTO:=git > > > PKG_SOURCE_URL=$(PROJECT_GIT)/project/uqmi.git > > > diff --git > > > a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh > > > b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh > > > index a6c785eb56..c0134f44dd 100755 > > > --- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh > > > +++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh > > > @@ -209,19 +209,36 @@ proto_qmi_setup() { > > > > > > uqmi -s -d "$device" --sync > /dev/null 2>&1 > > > > > > + uqmi -s -d "$device" --network-register > /dev/null 2>&1 > > > + > > > echo "Waiting for network registration" > > > + sleep 1 > > > local registration_timeout=0 > > > - while uqmi -s -d "$device" --get-serving-system | grep > > > '"searching"' > /dev/null; do > > > - [ -e "$device" ] || return 1 > > > - if [ "$registration_timeout" -lt "$timeout" -o "$timeout" = "0" > > > ]; then > > > - let registration_timeout++ > > > - sleep 1; > > > + local registration_state="" > > > + while true; do > > > + registration_state=$(uqmi -s -d "$device" --get-serving-system > > > 2>/dev/null | jsonfilter -e "@.registration" 2>/dev/null) > > > + > > > + [ "$registration_state" = "registered" ] && b
Re: [PATCH v2] uqmi: fix network registration loop
On 2021-05-08 12:33, Baptiste Jonglez wrote: Applied, thanks. Does this need to be backported to 21.02 or even 19.07? yes that would not be bad at least for openwrt-21.02 On openwrt-19.07 there are additional commits needed. Thanks for take care Baptiste On 20-04-21, thomas.rich...@kontron.com wrote: From: Thomas Richard With some debug in qmi.sh using following patch, some errors are visible in the registration step @@ -29,6 +29,7 @@ proto_qmi_init_config() { } proto_qmi_setup() { + set -x local interface="$1" local dataformat connstat plmn_mode mcc mnc local device apn auth username password pincode delay modes pdptype @@ -224,6 +225,8 @@ proto_qmi_setup() { fi done + registration=$(uqmi -s -d "$device" --get-serving-system) + [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" > /dev/null 2>&1 echo "Starting network $interface" During the boot of the system, modem could not start automatically its network registration. netifd: wan (9235): + echo 'Waiting for network registration' netifd: wan (9235): Waiting for network registration netifd: wan (9235): + local 'registration_timeout=0' netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system netifd: wan (9235): + grep '"searching"' netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system netifd: wan (9235): + registration='{"registration":"not_registered","plmn_mcc":208,"plmn_mnc":20,"plmn_description":"","roaming":true}' netifd: wan (9235): + '[' -n ] netifd: wan (9235): + echo 'Starting network wan' As the while loop checks only "searching" pattern, uqmi.sh script quits searching loop and continues whereas the modem is not registered Other issue, after X seconds modem stops searching. netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system netifd: wan (9213): + grep '"searching"' netifd: wan (9213): + '[' -e /dev/cdc-wdm0 ] netifd: wan (9213): + '[' 3 -lt 0 -o 0 '=' 0 ] netifd: wan (9213): + let registration_timeout++ netifd: wan (9213): + sleep 1 netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system netifd: wan (9213): + grep '"searching"' netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system netifd: wan (9213): + registration='{"registration":"not_registered"}' netifd: wan (9213): + '[' -n ] netifd: wan (9213): + echo 'Starting network wan' netifd: wan (9213): Starting network wan If registration_timeout is not expired, registration can be restarted Signed-off-by: Thomas Richard --- package/network/utils/uqmi/Makefile| 2 +- .../utils/uqmi/files/lib/netifd/proto/qmi.sh | 35 -- 2 files changed, 27 insertions(+), 10 deletions(-) diff --git a/package/network/utils/uqmi/Makefile b/package/network/utils/uqmi/Makefile index 68958a3729..da54ba0f46 100644 --- a/package/network/utils/uqmi/Makefile +++ b/package/network/utils/uqmi/Makefile @@ -1,7 +1,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=uqmi -PKG_RELEASE:=2 +PKG_RELEASE:=3 PKG_SOURCE_PROTO:=git PKG_SOURCE_URL=$(PROJECT_GIT)/project/uqmi.git diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh index a6c785eb56..c0134f44dd 100755 --- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh +++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh @@ -209,19 +209,36 @@ proto_qmi_setup() { uqmi -s -d "$device" --sync > /dev/null 2>&1 + uqmi -s -d "$device" --network-register > /dev/null 2>&1 + echo "Waiting for network registration" + sleep 1 local registration_timeout=0 - while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > /dev/null; do - [ -e "$device" ] || return 1 - if [ "$registration_timeout" -lt "$timeout" -o "$timeout" = "0" ]; then - let registration_timeout++ - sleep 1; + local registration_state="" + while true; do + registration_state=$(uqmi -s -d "$device" --get-serving-system 2>/dev/null | jsonfilter -e "@.registration" 2>/dev/null) + + [ "$registration_state" = "registered" ] && break + + if [ "$registration_state" = "searching" ] || [ "$registration_state" = "not_registered" ]; then + if [ "$registration_timeout" -lt "$timeout" ] || [ "$timeout" = "0" ]; then + [ "$registration_state" = "searching" ] || { + echo "Device stopped network registration. Restart network registration" + uqmi -s -d "$device" --network-register > /dev/null 2>&1 + } + let registration_timeout++ + sleep 1 + continue + fi + echo "Network registration failed, registration timeout reached" el
Re: [PATCH v2] uqmi: fix network registration loop
Applied, thanks. Does this need to be backported to 21.02 or even 19.07? Baptiste On 20-04-21, thomas.rich...@kontron.com wrote: > From: Thomas Richard > > With some debug in qmi.sh using following patch, some errors are visible > in the registration step > @@ -29,6 +29,7 @@ proto_qmi_init_config() { > } > > proto_qmi_setup() { > + set -x > local interface="$1" > local dataformat connstat plmn_mode mcc mnc > local device apn auth username password pincode delay modes pdptype > @@ -224,6 +225,8 @@ proto_qmi_setup() { > fi > done > > + registration=$(uqmi -s -d "$device" --get-serving-system) > + > [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" > > /dev/null 2>&1 > > echo "Starting network $interface" > > During the boot of the system, modem could not start automatically its > network registration. > netifd: wan (9235): + echo 'Waiting for network registration' > netifd: wan (9235): Waiting for network registration > netifd: wan (9235): + local 'registration_timeout=0' > netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system > netifd: wan (9235): + grep '"searching"' > netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system > netifd: wan (9235): + > registration='{"registration":"not_registered","plmn_mcc":208,"plmn_mnc":20,"plmn_description":"","roaming":true}' > netifd: wan (9235): + '[' -n ] > netifd: wan (9235): + echo 'Starting network wan' > > As the while loop checks only "searching" pattern, uqmi.sh script quits > searching loop and continues whereas the modem is not registered > > Other issue, after X seconds modem stops searching. > netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system > netifd: wan (9213): + grep '"searching"' > netifd: wan (9213): + '[' -e /dev/cdc-wdm0 ] > netifd: wan (9213): + '[' 3 -lt 0 -o 0 '=' 0 ] > netifd: wan (9213): + let registration_timeout++ > netifd: wan (9213): + sleep 1 > netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system > netifd: wan (9213): + grep '"searching"' > netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system > netifd: wan (9213): + registration='{"registration":"not_registered"}' > netifd: wan (9213): + '[' -n ] > netifd: wan (9213): + echo 'Starting network wan' > netifd: wan (9213): Starting network wan > > If registration_timeout is not expired, registration can be restarted > > Signed-off-by: Thomas Richard > --- > package/network/utils/uqmi/Makefile| 2 +- > .../utils/uqmi/files/lib/netifd/proto/qmi.sh | 35 > -- > 2 files changed, 27 insertions(+), 10 deletions(-) > > diff --git a/package/network/utils/uqmi/Makefile > b/package/network/utils/uqmi/Makefile > index 68958a3729..da54ba0f46 100644 > --- a/package/network/utils/uqmi/Makefile > +++ b/package/network/utils/uqmi/Makefile > @@ -1,7 +1,7 @@ > include $(TOPDIR)/rules.mk > > PKG_NAME:=uqmi > -PKG_RELEASE:=2 > +PKG_RELEASE:=3 > > PKG_SOURCE_PROTO:=git > PKG_SOURCE_URL=$(PROJECT_GIT)/project/uqmi.git > diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh > b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh > index a6c785eb56..c0134f44dd 100755 > --- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh > +++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh > @@ -209,19 +209,36 @@ proto_qmi_setup() { > > uqmi -s -d "$device" --sync > /dev/null 2>&1 > > + uqmi -s -d "$device" --network-register > /dev/null 2>&1 > + > echo "Waiting for network registration" > + sleep 1 > local registration_timeout=0 > - while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > > /dev/null; do > - [ -e "$device" ] || return 1 > - if [ "$registration_timeout" -lt "$timeout" -o "$timeout" = "0" > ]; then > - let registration_timeout++ > - sleep 1; > + local registration_state="" > + while true; do > + registration_state=$(uqmi -s -d "$device" --get-serving-system > 2>/dev/null | jsonfilter -e "@.registration" 2>/dev/null) > + > + [ "$registration_state" = "registered" ] && break > + > + if [ "$registration_state" = "searching" ] || [ > "$registration_state" = "not_registered" ]; then > + if [ "$registration_timeout" -lt "$timeout" ] || [ > "$timeout" = "0" ]; then > + [ "$registration_state" = "searching" ] || { > + echo "Device stopped network > registration. Restart network registration" > + uqmi -s -d "$device" --network-register > > /dev/null 2>&1 > + } > + let registration_timeout++ > + sleep 1 > + continue > + fi > +
Re: [PATCH v2] uqmi: fix network registration loop
On 2021-04-20 16:49, thomas.rich...@kontron.com wrote: From: Thomas Richard With some debug in qmi.sh using following patch, some errors are visible in the registration step @@ -29,6 +29,7 @@ proto_qmi_init_config() { } proto_qmi_setup() { + set -x local interface="$1" local dataformat connstat plmn_mode mcc mnc local device apn auth username password pincode delay modes pdptype @@ -224,6 +225,8 @@ proto_qmi_setup() { fi done + registration=$(uqmi -s -d "$device" --get-serving-system) + [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" > /dev/null 2>&1 echo "Starting network $interface" During the boot of the system, modem could not start automatically its network registration. netifd: wan (9235): + echo 'Waiting for network registration' netifd: wan (9235): Waiting for network registration netifd: wan (9235): + local 'registration_timeout=0' netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system netifd: wan (9235): + grep '"searching"' netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system netifd: wan (9235): + registration='{"registration":"not_registered","plmn_mcc":208,"plmn_mnc":20,"plmn_description":"","roaming":true}' netifd: wan (9235): + '[' -n ] netifd: wan (9235): + echo 'Starting network wan' As the while loop checks only "searching" pattern, uqmi.sh script quits searching loop and continues whereas the modem is not registered Other issue, after X seconds modem stops searching. netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system netifd: wan (9213): + grep '"searching"' netifd: wan (9213): + '[' -e /dev/cdc-wdm0 ] netifd: wan (9213): + '[' 3 -lt 0 -o 0 '=' 0 ] netifd: wan (9213): + let registration_timeout++ netifd: wan (9213): + sleep 1 netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system netifd: wan (9213): + grep '"searching"' netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system netifd: wan (9213): + registration='{"registration":"not_registered"}' netifd: wan (9213): + '[' -n ] netifd: wan (9213): + echo 'Starting network wan' netifd: wan (9213): Starting network wan If registration_timeout is not expired, registration can be restarted Signed-off-by: Thomas Richard Tested-by: Florian Eckert Works as expected. Thanks! ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
[PATCH v2] uqmi: fix network registration loop
From: Thomas Richard With some debug in qmi.sh using following patch, some errors are visible in the registration step @@ -29,6 +29,7 @@ proto_qmi_init_config() { } proto_qmi_setup() { + set -x local interface="$1" local dataformat connstat plmn_mode mcc mnc local device apn auth username password pincode delay modes pdptype @@ -224,6 +225,8 @@ proto_qmi_setup() { fi done + registration=$(uqmi -s -d "$device" --get-serving-system) + [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes" > /dev/null 2>&1 echo "Starting network $interface" During the boot of the system, modem could not start automatically its network registration. netifd: wan (9235): + echo 'Waiting for network registration' netifd: wan (9235): Waiting for network registration netifd: wan (9235): + local 'registration_timeout=0' netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system netifd: wan (9235): + grep '"searching"' netifd: wan (9235): + uqmi -s -d /dev/cdc-wdm1 --get-serving-system netifd: wan (9235): + registration='{"registration":"not_registered","plmn_mcc":208,"plmn_mnc":20,"plmn_description":"","roaming":true}' netifd: wan (9235): + '[' -n ] netifd: wan (9235): + echo 'Starting network wan' As the while loop checks only "searching" pattern, uqmi.sh script quits searching loop and continues whereas the modem is not registered Other issue, after X seconds modem stops searching. netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system netifd: wan (9213): + grep '"searching"' netifd: wan (9213): + '[' -e /dev/cdc-wdm0 ] netifd: wan (9213): + '[' 3 -lt 0 -o 0 '=' 0 ] netifd: wan (9213): + let registration_timeout++ netifd: wan (9213): + sleep 1 netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system netifd: wan (9213): + grep '"searching"' netifd: wan (9213): + uqmi -s -d /dev/cdc-wdm0 --get-serving-system netifd: wan (9213): + registration='{"registration":"not_registered"}' netifd: wan (9213): + '[' -n ] netifd: wan (9213): + echo 'Starting network wan' netifd: wan (9213): Starting network wan If registration_timeout is not expired, registration can be restarted Signed-off-by: Thomas Richard --- package/network/utils/uqmi/Makefile| 2 +- .../utils/uqmi/files/lib/netifd/proto/qmi.sh | 35 -- 2 files changed, 27 insertions(+), 10 deletions(-) diff --git a/package/network/utils/uqmi/Makefile b/package/network/utils/uqmi/Makefile index 68958a3729..da54ba0f46 100644 --- a/package/network/utils/uqmi/Makefile +++ b/package/network/utils/uqmi/Makefile @@ -1,7 +1,7 @@ include $(TOPDIR)/rules.mk PKG_NAME:=uqmi -PKG_RELEASE:=2 +PKG_RELEASE:=3 PKG_SOURCE_PROTO:=git PKG_SOURCE_URL=$(PROJECT_GIT)/project/uqmi.git diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh index a6c785eb56..c0134f44dd 100755 --- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh +++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh @@ -209,19 +209,36 @@ proto_qmi_setup() { uqmi -s -d "$device" --sync > /dev/null 2>&1 + uqmi -s -d "$device" --network-register > /dev/null 2>&1 + echo "Waiting for network registration" + sleep 1 local registration_timeout=0 - while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > /dev/null; do - [ -e "$device" ] || return 1 - if [ "$registration_timeout" -lt "$timeout" -o "$timeout" = "0" ]; then - let registration_timeout++ - sleep 1; + local registration_state="" + while true; do + registration_state=$(uqmi -s -d "$device" --get-serving-system 2>/dev/null | jsonfilter -e "@.registration" 2>/dev/null) + + [ "$registration_state" = "registered" ] && break + + if [ "$registration_state" = "searching" ] || [ "$registration_state" = "not_registered" ]; then + if [ "$registration_timeout" -lt "$timeout" ] || [ "$timeout" = "0" ]; then + [ "$registration_state" = "searching" ] || { + echo "Device stopped network registration. Restart network registration" + uqmi -s -d "$device" --network-register > /dev/null 2>&1 + } + let registration_timeout++ + sleep 1 + continue + fi + echo "Network registration failed, registration timeout reached" else - echo "Network registration failed" - proto_notify_error "$interface" NETWORK_REGISTRATION_FAILED - proto_block_restart "$interface" - re