Re: [PATCH v2 0/7] 22.03 lantiq: add support for x490 Fritzboxes
On Tue, 25 Oct 2022 00:24:49 +0200 Hauke Mehrtens wrote: > On 10/23/22 13:19, Torsten Duwe wrote: > > Changes from v1: > > > > > > * return to squashfs for the rootfs; ubifs causes too much > > complexity esp. for updates, when even the same model can be > > equipped with varying flash chip geometries. UBI partitioning and > > volumes are kept though. > > Hi, > > How is this related to the pull request adding support for these > devices on github? > https://github.com/openwrt/openwrt/pull/5075 > > The pull request on github looks mostly ok to me, I just had some > minor questions. There's 2 major differences: most importantly, I ignore the secondary system for the WiFi, which I do not need. And secondly, see above, I returned the build to squashfs, which eliminates the need to look at the actual flash geometry (the -micron.dts variants in Daniel's version). Daniel goes for the 100% solution, including WiFi. My patch set is thus smaller, and IMHO suited for 22.03, whereas Daniel correctly targets master. Maybe we can at least unify the device tree source. Torsten ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: AW: [PATCH v2 0/7] 22.03 lantiq: add support for x490 Fritzboxes
Hi,
I am also fine if the user has to use image builder. This board is a bit
special.
Maybe we should allow board specific initram fs root file systems in the
future. This would also help in other cases where the user has to bot an
initramfs system for initial flashing. We can do this later.
Hauke
On 10/25/22 08:50, kestrel1...@t-online.de wrote:
Hi,
I can understand that it took a long time. The wasp loader kernel module v5 is
the next in the review list of the remoteproc-linux kernel list.
I will try to deal with Haukes suggestions by the end of the week. With regards
to the packages, I think wpad is a left over from my tests and I can remove it
and I will rework the kernel patches.
But for the special packages that are not honored by the build bots, I do not
really have a solution. For now I was thinking of instructions to use the image
builder, which also means, that as a start there will not be any downloadable
images that cover all possible functionality.
Daniel.
-Original-Nachricht-
Betreff: Re: [PATCH v2 0/7] 22.03 lantiq: add support for x490 Fritzboxes
Datum: 2022-10-25T00:24:57+0200
Von: "Hauke Mehrtens"
An: "Torsten Duwe" , "openwrt-devel@lists.openwrt.org"
On 10/23/22 13:19, Torsten Duwe wrote:
Hi all,
Here is my second attempt for initial FritzBox x490 support. 22.03 now
has all the necessary prerequisites, so support can be added according
to the rules.
The original code snippets were submitted by John Crispin (IIRC),
Andreas Böhler and Daniel Kestrel. I carved out the changes I
considered necessary, integrated and tested them and cleaned them up
(hopefully ;)
These are the minimal changes required to run the FB {3,7}490 as DSL
router (tested!). The 5490 is reported to be similar, so I included
it, but could not test it due to lack of hardware.
The wireless on these boxes is offloaded to a secondary SoC which
needs to be provided its own OS. This feature is explicitly left out
here in order to go step by step. I kept some loose ends where they
don't hurt, for future reference.
Changes from v1:
* return to squashfs for the rootfs; ubifs causes too much complexity
esp. for updates, when even the same model can be equipped with
varying flash chip geometries. UBI partitioning and volumes are kept
though.
Hi,
How is this related to the pull request adding support for these devices
on github?
https://github.com/openwrt/openwrt/pull/5075
The pull request on github looks mostly ok to me, I just had some minor
questions.
Hauke
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
AW: [PATCH v2 0/7] 22.03 lantiq: add support for x490 Fritzboxes
Hi,
I can understand that it took a long time. The wasp loader kernel module v5 is
the next in the review list of the remoteproc-linux kernel list.
I will try to deal with Haukes suggestions by the end of the week. With regards
to the packages, I think wpad is a left over from my tests and I can remove it
and I will rework the kernel patches.
But for the special packages that are not honored by the build bots, I do not
really have a solution. For now I was thinking of instructions to use the image
builder, which also means, that as a start there will not be any downloadable
images that cover all possible functionality.
Daniel.
-Original-Nachricht-
Betreff: Re: [PATCH v2 0/7] 22.03 lantiq: add support for x490 Fritzboxes
Datum: 2022-10-25T00:24:57+0200
Von: "Hauke Mehrtens"
An: "Torsten Duwe" , "openwrt-devel@lists.openwrt.org"
On 10/23/22 13:19, Torsten Duwe wrote:
> Hi all,
>
> Here is my second attempt for initial FritzBox x490 support. 22.03 now
> has all the necessary prerequisites, so support can be added according
> to the rules.
>
> The original code snippets were submitted by John Crispin (IIRC),
> Andreas Böhler and Daniel Kestrel. I carved out the changes I
> considered necessary, integrated and tested them and cleaned them up
> (hopefully ;)
>
> These are the minimal changes required to run the FB {3,7}490 as DSL
> router (tested!). The 5490 is reported to be similar, so I included
> it, but could not test it due to lack of hardware.
>
> The wireless on these boxes is offloaded to a secondary SoC which
> needs to be provided its own OS. This feature is explicitly left out
> here in order to go step by step. I kept some loose ends where they
> don't hurt, for future reference.
>
> Changes from v1:
>
>
> * return to squashfs for the rootfs; ubifs causes too much complexity
>esp. for updates, when even the same model can be equipped with
>varying flash chip geometries. UBI partitioning and volumes are kept
>though.
Hi,
How is this related to the pull request adding support for these devices
on github?
https://github.com/openwrt/openwrt/pull/5075
The pull request on github looks mostly ok to me, I just had some minor
questions.
Hauke
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [PATCH v2 0/7] 22.03 lantiq: add support for x490 Fritzboxes
On 10/23/22 13:19, Torsten Duwe wrote:
Hi all,
Here is my second attempt for initial FritzBox x490 support. 22.03 now
has all the necessary prerequisites, so support can be added according
to the rules.
The original code snippets were submitted by John Crispin (IIRC),
Andreas Böhler and Daniel Kestrel. I carved out the changes I
considered necessary, integrated and tested them and cleaned them up
(hopefully ;)
These are the minimal changes required to run the FB {3,7}490 as DSL
router (tested!). The 5490 is reported to be similar, so I included
it, but could not test it due to lack of hardware.
The wireless on these boxes is offloaded to a secondary SoC which
needs to be provided its own OS. This feature is explicitly left out
here in order to go step by step. I kept some loose ends where they
don't hurt, for future reference.
Changes from v1:
* return to squashfs for the rootfs; ubifs causes too much complexity
esp. for updates, when even the same model can be equipped with
varying flash chip geometries. UBI partitioning and volumes are kept
though.
Hi,
How is this related to the pull request adding support for these devices
on github?
https://github.com/openwrt/openwrt/pull/5075
The pull request on github looks mostly ok to me, I just had some minor
questions.
Hauke
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [PATCH v2 0/7] 22.03 lantiq: add support for x490 Fritzboxes
git neatly preserved all the time stamps :( patchwork however got the series: https://patchwork.ozlabs.org/project/openwrt/list/?series=324150 Sorry for the confusion. Torsten ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
[PATCH v2 0/7] 22.03 lantiq: add support for x490 Fritzboxes
Hi all,
Here is my second attempt for initial FritzBox x490 support. 22.03 now
has all the necessary prerequisites, so support can be added according
to the rules.
The original code snippets were submitted by John Crispin (IIRC),
Andreas Böhler and Daniel Kestrel. I carved out the changes I
considered necessary, integrated and tested them and cleaned them up
(hopefully ;)
These are the minimal changes required to run the FB {3,7}490 as DSL
router (tested!). The 5490 is reported to be similar, so I included
it, but could not test it due to lack of hardware.
The wireless on these boxes is offloaded to a secondary SoC which
needs to be provided its own OS. This feature is explicitly left out
here in order to go step by step. I kept some loose ends where they
don't hurt, for future reference.
Changes from v1:
* return to squashfs for the rootfs; ubifs causes too much complexity
esp. for updates, when even the same model can be equipped with
varying flash chip geometries. UBI partitioning and volumes are kept
though.
Torsten Duwe (7):
lantiq: fix endianess for PCIe slave XBAR
lantiq: add common device tree template for x490 Fritzboxes
lantiq: add DTS for Fritzbox 3490
lantiq: add DTS for Fritzbox 5490
lantiq: add DTS for Fritzbox 7490
lantiq: add image handling for x490 Fritzboxes
lantiq: add renesas USB3 support
package/kernel/linux/modules/usb.mk | 1 +
target/linux/lantiq/config-5.10 | 2 +
.../boot/dts/lantiq/vr9_avm_fritz3490.dts | 58 +
.../boot/dts/lantiq/vr9_avm_fritz5490.dts | 98 +++
.../boot/dts/lantiq/vr9_avm_fritz7490.dts | 61 +
.../boot/dts/lantiq/vr9_avm_fritzx490.dtsi| 240 ++
target/linux/lantiq/image/vr9.mk | 30 +++
...q-ifxmips_pcie-fix-slave-XBAR-endian.patch | 45
.../xrx200/base-files/etc/board.d/01_leds | 3 +-
.../xrx200/base-files/etc/board.d/02_network | 10 +-
.../xrx200/base-files/lib/upgrade/platform.sh | 3 +
11 files changed, 549 insertions(+), 2 deletions(-)
create mode 100644
target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3490.dts
create mode 100644
target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz5490.dts
create mode 100644
target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7490.dts
create mode 100644
target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritzx490.dtsi
create mode 100644
target/linux/lantiq/patches-5.10/0156-lantiq-ifxmips_pcie-fix-slave-XBAR-endian.patch
--
2.35.3
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
