Re: wpa_supplicant and switch to ucode
The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software.--- Begin Message --- Hi! Thanks Felix, that fixed the problem! Am 21.09.23 um 21:21 schrieb Felix Fietkau: On 21.09.23 20:00, André Valentin wrote: Hi! I just tested the current 23.05rc tree with the new hostapd patches and noticed that 802.1x on wired interfaces does now work anymore. Until now it was really easy to use the running wpa_supplicant with that, i just added a config with: ubus call wpa_supplicant config_add '{ "driver": "wired", "ctrl": "/var/run/wpa_supplicant", "bridge": "switch1", "iface": "eth0", "config": "/etc/wpad/eth0.conf" }' But after the switch, I only get Command failed: Invalid argument I took a look at the wpa_supplicant.uc but couldn't find a obvious reason. Perhaps someone could give me a hint? Of course I would like to add support again. Does this help? https://nbd.name/p/8f6b9517 Thanks, - Felix Kind regards, André --- End Message --- ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: wpa_supplicant and switch to ucode
On 21.09.23 20:00, André Valentin wrote: Hi! I just tested the current 23.05rc tree with the new hostapd patches and noticed that 802.1x on wired interfaces does now work anymore. Until now it was really easy to use the running wpa_supplicant with that, i just added a config with: ubus call wpa_supplicant config_add '{ "driver": "wired", "ctrl": "/var/run/wpa_supplicant", "bridge": "switch1", "iface": "eth0", "config": "/etc/wpad/eth0.conf" }' But after the switch, I only get Command failed: Invalid argument I took a look at the wpa_supplicant.uc but couldn't find a obvious reason. Perhaps someone could give me a hint? Of course I would like to add support again. Does this help? https://nbd.name/p/8f6b9517 Thanks, - Felix ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
wpa_supplicant and switch to ucode
The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software.--- Begin Message --- Hi! I just tested the current 23.05rc tree with the new hostapd patches and noticed that 802.1x on wired interfaces does now work anymore. Until now it was really easy to use the running wpa_supplicant with that, i just added a config with: ubus call wpa_supplicant config_add '{ "driver": "wired", "ctrl": "/var/run/wpa_supplicant", "bridge": "switch1", "iface": "eth0", "config": "/etc/wpad/eth0.conf" }' But after the switch, I only get Command failed: Invalid argument I took a look at the wpa_supplicant.uc but couldn't find a obvious reason. Perhaps someone could give me a hint? Of course I would like to add support again. Kind regards, André --- End Message --- ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel