Hi,
Besides the question below, is the filter "point interpolation" is used for
more advanced interpolation scheme? Can I use this filter to obtain more
accurate interpolation result? Anyone who could explain this filter to me? I
just couldn't find any tutorial on this filter.
Many thanks,
Wilson
From: HongchaoWang [mailto:hongchao.wang2...@gmail.com]
Sent: Friday, 18 August 2017 11:37 AM
To: 'paraview@paraview.org' <paraview@paraview.org>
Subject: Interpolation error in paraview
I'm just wondering what interpolation scheme is used for data manipulation
in Paraview?
I'm using Paraview 5.2.0. I want to measure the velocity very close to a
wall surface so that I can obtain the wall shear stress. However, I found
the velocity measured using Paraview is different from the results I have
obtained using the postprocessing tool in OpenFoam. Compared with the
analytical solution which is already known in my case, Paraview result is
worse and is 10% smaller than the analytical solution while the OpenFoam
result agrees with the analytical solution very well. With finer mesh, the
difference between the Paraview and OpenFoam results becomes smaller, so I
believe the difference is due to the interpolation error.
Anyone who has experience on this problem? Is there any advanced
interpolation scheme that I can use in Paraview?
Many thanks,
Wilson
___
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview