John,
Sam’s advice is sound, but I am curious where your data is coming from.
ParaView usually does not automatically apply displacements by warping. The
only exception I know of is the Exodus II reader, and in that case you can turn
off the warping by unchecking the Apply Displacements checkbox.
Otherwise, it might be that the displacements are already applied in your data
file. In which case Sam’s suggestion for undoing them with a negative warp
should do the trick.
-Ken
From: ParaView [mailto:paraview-boun...@paraview.org] On Behalf Of Samuel Key
Sent: Wednesday, November 22, 2017 7:25 AM
To: paraview@paraview.org
Subject: [EXTERNAL] Re: [Paraview] Disable automatic mesh warping
John--
Have tried the Warp filter with a scale of -1.0?
--Sam
On 11/22/2017 2:52 AM, John Mangeri wrote:
Hello,
I am working in a reduced unit system where the computed strain fields are
around order 1. I could write postprocessors to rescale before visualization
but that would increase my computational time.
Is there a way to turn off the automatic warping that ParaView performs on
disp_k (k =x, y, z) fields?
I tried to use the WarpByVector filter with scale of 0.1 or smaller and that
did not seem to work properly. I should mention I'm on version 5.0 (my favorite
for a variety of reasons), so maybe the this WarpByVector issue is resolved in
newer versions.
Thanks,
John
___
Powered by www.kitware.com<http://www.kitware.com>
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
___
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
