RE: Goldwave/JAWS Questions

2013-09-18 Thread Jim Hunt
Hi Rob, Dave and listers,

Rob, thank you thank you, I did exactly what you said in Goldwave, setting
all the visuals to blank, and by golly that did the trick!  Goldwave works
beautifully with JAWS now.  I'm editing a wave file now and my USB
headphones are connected, no problems.  Thank you so much again.  Dave,
thank you for your comments as well.  I do plan on installing NVDA as my
backup or secondary screen reader.

Cheers,
Jim

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Rob Tabor
Sent: Wednesday, September 18, 2013 8:33 PM
To: 'PC Audio Discussion List'
Subject: RE: Goldwave/JAWS Questions

Hi Jim and Listers,

When I first started learning to use GW I had trouble with GW crashing JAWS
and often the only way to recover speech was to reboot, which was
frustrating because it often required me to start all over again with a
project. In any event I discovered that JAWS and GW interface much more
cooperatively after I reset all the controls in the visual tab of the user
preferences to "blank." This in effect disables all the visuals which had
been causing video intercept conflicts in JAWS. I have not had a bit of
trouble with losing speech during the operation of GW since then, and this
has held true throughout several updates of both applications.

HTH and best regards,
Rob "Jayhawk" Tabor

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Jim Hunt
Sent: Wednesday, September 18, 2013 5:12 PM
To: pc-audio@pc-audio.org
Subject: Goldwave/JAWS Questions

Hello All,

 

I recently heard that Microsoft will discontinue support for Windows XP in
March of next year, 2014.  With that in mind, I had asked a friend here in
my area to install Windows 7 32-bit on my Netbook.  So he did, and for a
while, all had been going beautifully.  I have Jaws 14 32-bit on the
netbook, using Eloquence speech.  For audio editing, I used Goldwave.

 

Here is where I have run into a problem:  I can use Goldwave fine for a
while with JAWS and my Logitech ClearChat USB headphones plugged into a USB
port, but after a while, JAWS stops speaking.  Sometimes I can get JAWS to
start speaking again by disconnecting the USB headphones, and eventually
JAWS stops speaking altogether.  At that point, I cannot even get my
portable NVDA on my flash drive to start.  When that happens, I ask a
sighted person to read the screen to tell me what is displayed on it. With
that information, I then save what I had been working on in Goldwave, close
Goldwave, power-down the Netbook, and power it back up again and wait for
JAWS to start speaking.

 

I have noticed two interesting things:  JAWS and Goldwave do not behave this
way on the bigger, faster Dell laptop that I have, neither do they behave
strangely when using NVDA on either machine.  The problem I mentioned above
only happens when I use JAWS, Goldwave and the USB headphones on the
Netbook.  So, could this be a problem in JAWS, a USB port issue on the
Netbook, or is there something I am or am not doing?

 

If anyone has any suggestions on what I can do to solve the problem or get
around it, please do feel free to let me know on or off list.

 

Thanks,

Jim

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


RE: recording a piano with my blue yeti microphone

2013-09-18 Thread Mike Bernard
Hey Andre,
I too have a Yeti Mic. If You're recording music, it might be best to record
the Piano in stereo. Good luck.
Mike
Rochester, NY.

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of André van
Deventer
Sent: Wednesday, September 18, 2013 10:57 AM
To: pc-audio@pc-audio.org
Subject: recording a piano with my blue yeti microphone

Hi all

 

Me and the yeti again.  I’m looking for some suggestions for a friend of
mine who will be recording her piano on my blue yeti this weekend.

 

The yeti has the following recording patterns:

stereo, cardioid, omnidirectional, bidirectional

 

Which of these patterns to record her piano would give the best results?
Any other suggestions will be most helpful.

 

Andre

 

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


Re: Goldwave/JAWS Questions

2013-09-18 Thread Dave Scrimenti
It seems like a USB problem because you say when JFW stops you can't get 
portable NVDA to work, but you can still save your GoldWave stuff. So your 
machine isn't frozen. You just can't get USB to function. Until you solve 
it, perhaps you could install NVDA rather than trying to use it on a flash 
drive, or maybe even use Narrator. This way you could at least get around 
without sighted help.
- Original Message - 
From: "Jim Hunt" 

To: 
Sent: Wednesday, September 18, 2013 6:11 PM
Subject: Goldwave/JAWS Questions



Hello All,



I recently heard that Microsoft will discontinue support for Windows XP in
March of next year, 2014.  With that in mind, I had asked a friend here in
my area to install Windows 7 32-bit on my Netbook.  So he did, and for a
while, all had been going beautifully.  I have Jaws 14 32-bit on the
netbook, using Eloquence speech.  For audio editing, I used Goldwave.



Here is where I have run into a problem:  I can use Goldwave fine for a
while with JAWS and my Logitech ClearChat USB headphones plugged into a 
USB

port, but after a while, JAWS stops speaking.  Sometimes I can get JAWS to
start speaking again by disconnecting the USB headphones, and eventually
JAWS stops speaking altogether.  At that point, I cannot even get my
portable NVDA on my flash drive to start.  When that happens, I ask a
sighted person to read the screen to tell me what is displayed on it. With
that information, I then save what I had been working on in Goldwave, 
close

Goldwave, power-down the Netbook, and power it back up again and wait for
JAWS to start speaking.



I have noticed two interesting things:  JAWS and Goldwave do not behave 
this

way on the bigger, faster Dell laptop that I have, neither do they behave
strangely when using NVDA on either machine.  The problem I mentioned 
above

only happens when I use JAWS, Goldwave and the USB headphones on the
Netbook.  So, could this be a problem in JAWS, a USB port issue on the
Netbook, or is there something I am or am not doing?



If anyone has any suggestions on what I can do to solve the problem or get
around it, please do feel free to let me know on or off list.



Thanks,

Jim

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org




To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


RE: Goldwave/JAWS Questions

2013-09-18 Thread Rob Tabor
Hi Jim and Listers,

When I first started learning to use GW I had trouble with GW crashing JAWS
and often the only way to recover speech was to reboot, which was
frustrating because it often required me to start all over again with a
project. In any event I discovered that JAWS and GW interface much more
cooperatively after I reset all the controls in the visual tab of the user
preferences to "blank." This in effect disables all the visuals which had
been causing video intercept conflicts in JAWS. I have not had a bit of
trouble with losing speech during the operation of GW since then, and this
has held true throughout several updates of both applications.

HTH and best regards,
Rob "Jayhawk" Tabor

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Jim Hunt
Sent: Wednesday, September 18, 2013 5:12 PM
To: pc-audio@pc-audio.org
Subject: Goldwave/JAWS Questions

Hello All,

 

I recently heard that Microsoft will discontinue support for Windows XP in
March of next year, 2014.  With that in mind, I had asked a friend here in
my area to install Windows 7 32-bit on my Netbook.  So he did, and for a
while, all had been going beautifully.  I have Jaws 14 32-bit on the
netbook, using Eloquence speech.  For audio editing, I used Goldwave.

 

Here is where I have run into a problem:  I can use Goldwave fine for a
while with JAWS and my Logitech ClearChat USB headphones plugged into a USB
port, but after a while, JAWS stops speaking.  Sometimes I can get JAWS to
start speaking again by disconnecting the USB headphones, and eventually
JAWS stops speaking altogether.  At that point, I cannot even get my
portable NVDA on my flash drive to start.  When that happens, I ask a
sighted person to read the screen to tell me what is displayed on it. With
that information, I then save what I had been working on in Goldwave, close
Goldwave, power-down the Netbook, and power it back up again and wait for
JAWS to start speaking.

 

I have noticed two interesting things:  JAWS and Goldwave do not behave this
way on the bigger, faster Dell laptop that I have, neither do they behave
strangely when using NVDA on either machine.  The problem I mentioned above
only happens when I use JAWS, Goldwave and the USB headphones on the
Netbook.  So, could this be a problem in JAWS, a USB port issue on the
Netbook, or is there something I am or am not doing?

 

If anyone has any suggestions on what I can do to solve the problem or get
around it, please do feel free to let me know on or off list.

 

Thanks,

Jim

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


Re: Is Audacity more accessible on the PC or the Mac,or doesn't it matter?

2013-09-18 Thread Dave Scrimenti
Well, I'm using Total Recorder, not Audacity, so I don't know if this 
applies with Audacity. But with Total Recorder, you can set it so it only 
records streams that begin after Total Recorder is opened. Since JFW or 
whatever you're using opens when you start the machine, it won't be 
recorded. Better yet, you can assign JFW to your internal card, in my case a 
Connexant, and make Total Recorder's virtual device driver the Windows 
default sound card. As a result, JFW goes through the Conexant, and 
everything else goes to Total Recorder. This has the advantage that you can 
record streams that started before you open Total Recorder. Unfortunately, 
all this audio versatility was ruined in Vista, and continues with worthless 
7 and even more worthless 8.
- Original Message - 
From: "David Bailes" 

To: "PC-audio" 
Sent: Wednesday, September 18, 2013 3:18 AM
Subject: Re: Is Audacity more accessible on the PC or the Mac,or doesn't it 
matter?



Hi Dave,
just out of interest, how to you separate the streams on XP?

David.


original message:
Unfortunately, that's what I thought. I'm trying to record programs on my PC 
like Rhapsody, YouTube streams, my Slingbox, etc. In XP, there's no problem 
separating these streams from JFW, but I can't do it in 7. Maybe the Mac is 
the way to go.


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


Goldwave/JAWS Questions

2013-09-18 Thread Jim Hunt
Hello All,

 

I recently heard that Microsoft will discontinue support for Windows XP in
March of next year, 2014.  With that in mind, I had asked a friend here in
my area to install Windows 7 32-bit on my Netbook.  So he did, and for a
while, all had been going beautifully.  I have Jaws 14 32-bit on the
netbook, using Eloquence speech.  For audio editing, I used Goldwave.

 

Here is where I have run into a problem:  I can use Goldwave fine for a
while with JAWS and my Logitech ClearChat USB headphones plugged into a USB
port, but after a while, JAWS stops speaking.  Sometimes I can get JAWS to
start speaking again by disconnecting the USB headphones, and eventually
JAWS stops speaking altogether.  At that point, I cannot even get my
portable NVDA on my flash drive to start.  When that happens, I ask a
sighted person to read the screen to tell me what is displayed on it. With
that information, I then save what I had been working on in Goldwave, close
Goldwave, power-down the Netbook, and power it back up again and wait for
JAWS to start speaking.

 

I have noticed two interesting things:  JAWS and Goldwave do not behave this
way on the bigger, faster Dell laptop that I have, neither do they behave
strangely when using NVDA on either machine.  The problem I mentioned above
only happens when I use JAWS, Goldwave and the USB headphones on the
Netbook.  So, could this be a problem in JAWS, a USB port issue on the
Netbook, or is there something I am or am not doing?

 

If anyone has any suggestions on what I can do to solve the problem or get
around it, please do feel free to let me know on or off list.

 

Thanks,

Jim

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


RE: windows media player goto command

2013-09-18 Thread Joseph Paton

Hi Tom,

I figured it may be a long shot.  These programme features are 
sometimes burried away in the menues and dialogues, so I thought it 
worth a crack incase somebody has located the keystroke for the function.


Like you I prefer winamp.  Particularly with the scripts from Jeff Bishop.

Kind regards,

Joe

At 15:23 18/09/2013, you wrote:

If there is such a thing, I wouldn't mind hearing about this myself!  But to
my knowledge, there isn't such a thing in Windows Media Player; that's why I
like Win amp as often, I'll start to listen to something, but have to come
back to it later!  If it's a WMP file, I'd have to pretty much start over
again!
Tom Kaufman

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Joseph
Paton
Sent: Wednesday, September 18, 2013 7:02 AM
To: PC audio discussion list.
Subject: windows media player goto command

Good Morning,

Winamp has a go to time function when playing audio files.  Does the
same function exist in WMP 11? and if so, how is it done?
An alternative but similar feature would be the facility to set book
marks in the files, can this be done?



Thanks.

Joe


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


Re: recording a piano with my blue yeti microphone

2013-09-18 Thread Curtis Delzer
I'd record in stereo with the microphone on the opposite side of the
piano from the player in the center of the instrument, not too elevated,
but not close to the hammers if a grand since there is then too much
mechanical  noise.

--
Curtis Delzer.
HS.

K 6 V F O
San Bernardino, CA.

curtis1...@verizon.net

skype: curtis1014



On Wed, 18 Sep 2013 16:57:24 +0200
André van Deventer  wrote:

> Hi all
> 
>  
> 
> Me and the yeti again.  I’m looking for some suggestions for a friend of
> mine who will be recording her piano on my blue yeti this weekend.
> 
>  
> 
> The yeti has the following recording patterns:
> 
> stereo, cardioid, omnidirectional, bidirectional
> 
>  
> 
> Which of these patterns to record her piano would give the best results?
> Any other suggestions will be most helpful.
> 
>  
> 
> Andre
> 
>  
> 
>  
> 
> To unsubscribe from this list, send a blank email to:
> pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


tapinradio ap

2013-09-18 Thread Ray Williams
I have a question for the group concerning tapinradio.  sometimes
while listening to a station it will drop to be replaced by another.
the title of the station stays the same on the list, but the stream is
something different.  thoughts, questions, answers, anhyone

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


Re: NOTES ON THE NEW SANGEAN PRD15 PORTABLE AM/FM RADIO

2013-09-18 Thread Dane Trethowan
I'm not in the U.S., I bought mine from eBay, Universal Radio and Beach 
Audio are 2 places off the top of my head which oculd supply you with a 
Sangean PRD5.



On 19/09/2013 3:23 AM, Dan McCurley wrote:
Where could I buy a prd5; I have a cc radio but it doesn't play 
anymore from its speaker so I've been using it as a tuner and the am 
is quite good.  If the prd5 is better, I think I need one.  I listen 
to a lot of far off stations at night.  Thanks for the info.


Dan
- Original Message - From: "Dane Trethowan" 


To: "PC Audio Discussion List" 
Sent: Tuesday, September 17, 2013 8:57 PM
Subject: NOTES ON THE NEW SANGEAN PRD15 PORTABLE AM/FM RADIO



Okay, first bad and then good points in that order.
AM sensitivity is shocking! that's a huge disappointment given that 
this set is an upgrade from the excellent PRD5 which is probably 
about the most sensitive portable radio on the AM band on Planet 
Earth right now.


FM however is hot! better than the sensitivity and selectivity found 
on such hot FM performers as the CC SW and the Sangean ATS909X radios.


The PRD15 is totally electronically controlled and this means more 
facilities available including basss and treble controls, these are 
accessed by pressing in the rotary volume control, a menu pops up 
offering various audio adjustments to choose from so you turn the 
volume knob to select the audio adjustment you wish to modify and 
then press the knob in, turning of the knob from that point adjusts 
the desired setting but after 5 seconds of inactivity the knob 
reverts to the volume audio adjustment.


I think the addition of bass and treble adjustments is a waste of 
time as they don't really make the radio sound any better, best leave 
it on "Flat" sound setting.


The PRD15 will charge rechargeable batteries through a built-in 
charging circuit, as yet I've not found out how this is activated but 
I suspect 1 of the buttons on the front of the set is used to switch 
the charging circuit on, can't see any battery type switch in the 
battery compartment, that's been the standard place to find such 
things on Sangean sets in the past.


This set is still a good value for money receiver for the price of 
$90.00 particularly if you like long distance FM listening, its a 
killer performer here with no overload on the FM band whatever, 
stereo sound through the speakers isn't too bad.




Sent from Dane's iPhone +613400494862




To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org 



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


Re: recording a piano with my blue yeti microphone

2013-09-18 Thread Loren Buntemeyer
Don't forget to get that piano tuned. And, your technician may give you tips 
for recording.

Loren Buntemeyer, RPT
- Original Message - 
From: "André van Deventer" 
To: "'PC Audio Discussion List'" 
Sent: Wednesday, September 18, 2013 12:19 PM
Subject: RE: recording a piano with my blue yeti microphone


Thanx man!!



-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Curtis
Delzer
Sent: 18 September 2013 06:17 PM
To: PC Audio Discussion List
Subject: Re: recording a piano with my blue yeti microphone

I'd record in stereo with the microphone on the opposite side of the piano
from the player in the center of the instrument, not too elevated, but not
close to the hammers if a grand since there is then too much mechanical
noise.

--
Curtis Delzer.
HS.

K 6 V F O
San Bernardino, CA.

curtis1...@verizon.net

skype: curtis1014



On Wed, 18 Sep 2013 16:57:24 +0200
André van Deventer  wrote:

> Hi all
>
>
>
> Me and the yeti again.  I'm looking for some suggestions for a friend
> of mine who will be recording her piano on my blue yeti this weekend.
>
>
>
> The yeti has the following recording patterns:
>
> stereo, cardioid, omnidirectional, bidirectional
>
>
>
> Which of these patterns to record her piano would give the best results?
> Any other suggestions will be most helpful.
>
>
>
> Andre
>
>
>
>
>
> To unsubscribe from this list, send a blank email to:
> pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


Re: NOTES ON THE NEW SANGEAN PRD15 PORTABLE AM/FM RADIO

2013-09-18 Thread Dan McCurley
Where could I buy a prd5; I have a cc radio but it doesn't play anymore from 
its speaker so I've been using it as a tuner and the am is quite good.  If 
the prd5 is better, I think I need one.  I listen to a lot of far off 
stations at night.  Thanks for the info.


Dan
- Original Message - 
From: "Dane Trethowan" 

To: "PC Audio Discussion List" 
Sent: Tuesday, September 17, 2013 8:57 PM
Subject: NOTES ON THE NEW SANGEAN PRD15 PORTABLE AM/FM RADIO



Okay, first bad and then good points in that order.
AM sensitivity is shocking! that's a huge disappointment given that this 
set is an upgrade from the excellent PRD5 which is probably about the most 
sensitive portable radio on the AM band on Planet Earth right now.


FM however is hot! better than the sensitivity and selectivity found on 
such hot FM performers as the CC SW and the Sangean ATS909X radios.


The PRD15 is totally electronically controlled and this means more 
facilities available including basss and treble controls, these are 
accessed by pressing in the rotary volume control, a menu pops up offering 
various audio adjustments to choose from so you turn the volume knob to 
select the audio adjustment you wish to modify and then press the knob in, 
turning of the knob from that point adjusts the desired setting but after 
5 seconds of inactivity the knob reverts to the volume audio adjustment.


I think the addition of bass and treble adjustments is a waste of time as 
they don't really make the radio sound any better, best leave it on "Flat" 
sound setting.


The PRD15 will charge rechargeable batteries through a built-in charging 
circuit, as yet I've not found out how this is activated but I suspect 1 
of the buttons on the front of the set is used to switch the charging 
circuit on, can't see any battery type switch in the battery compartment, 
that's been the standard place to find such things on Sangean sets in the 
past.


This set is still a good value for money receiver for the price of $90.00 
particularly if you like long distance FM listening, its a killer 
performer here with no overload on the FM band whatever, stereo sound 
through the speakers isn't too bad.




Sent from Dane's iPhone +613400494862




To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org 



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


RE: recording a piano with my blue yeti microphone

2013-09-18 Thread André van Deventer
Thanx man!!



-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Curtis
Delzer
Sent: 18 September 2013 06:17 PM
To: PC Audio Discussion List
Subject: Re: recording a piano with my blue yeti microphone

I'd record in stereo with the microphone on the opposite side of the piano
from the player in the center of the instrument, not too elevated, but not
close to the hammers if a grand since there is then too much mechanical
noise.

--
Curtis Delzer.
HS.

K 6 V F O
San Bernardino, CA.

curtis1...@verizon.net

skype: curtis1014



On Wed, 18 Sep 2013 16:57:24 +0200
André van Deventer  wrote:

> Hi all
> 
>  
> 
> Me and the yeti again.  I’m looking for some suggestions for a friend 
> of mine who will be recording her piano on my blue yeti this weekend.
> 
>  
> 
> The yeti has the following recording patterns:
> 
> stereo, cardioid, omnidirectional, bidirectional
> 
>  
> 
> Which of these patterns to record her piano would give the best results?
> Any other suggestions will be most helpful.
> 
>  
> 
> Andre
> 
>  
> 
>  
> 
> To unsubscribe from this list, send a blank email to:
> pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


music choice dropted on tapin radio

2013-09-18 Thread BRIAN
I have not noticed the problem in question but I would like to know why the 
music choice network channels were droped from tapin radio I have emailed 
them but they did not respond to my emails I guess they don't care about 
their users thisvery rude of them a simple explination would have ben very 
nice but just not to respond.


-Original Message- 
From: Ray Williams

Sent: Wednesday, September 18, 2013 11:07 AM
To: pc-audio@pc-audio.org
Subject: tapinradio ap

I have a question for the group concerning tapinradio.  sometimes
while listening to a station it will drop to be replaced by another.
the title of the station stays the same on the list, but the stream is
something different.  thoughts, questions, answers, anhyone

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org 



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


recording a piano with my blue yeti microphone

2013-09-18 Thread André van Deventer
Hi all

 

Me and the yeti again.  I’m looking for some suggestions for a friend of
mine who will be recording her piano on my blue yeti this weekend.

 

The yeti has the following recording patterns:

stereo, cardioid, omnidirectional, bidirectional

 

Which of these patterns to record her piano would give the best results?
Any other suggestions will be most helpful.

 

Andre

 

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


RE: windows media player goto command

2013-09-18 Thread Tom Kaufman
If there is such a thing, I wouldn't mind hearing about this myself!  But to
my knowledge, there isn't such a thing in Windows Media Player; that's why I
like Win amp as often, I'll start to listen to something, but have to come
back to it later!  If it's a WMP file, I'd have to pretty much start over
again!
Tom Kaufman

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Joseph
Paton
Sent: Wednesday, September 18, 2013 7:02 AM
To: PC audio discussion list. 
Subject: windows media player goto command

Good Morning,

Winamp has a go to time function when playing audio files.  Does the 
same function exist in WMP 11? and if so, how is it done?
An alternative but similar feature would be the facility to set book 
marks in the files, can this be done?



Thanks.

Joe


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


windows media player goto command

2013-09-18 Thread Joseph Paton

Good Morning,

Winamp has a go to time function when playing audio files.  Does the 
same function exist in WMP 11? and if so, how is it done?
An alternative but similar feature would be the facility to set book 
marks in the files, can this be done?




Thanks.

Joe


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


Re: Is Audacity more accessible on the PC or the Mac, or doesn't it matter?

2013-09-18 Thread David Bailes
Hi Dave,
just out of interest, how to you separate the streams on XP?
 
David.
 
 
original message:
Unfortunately, that's what I thought. I'm trying to record programs on my PC 
like Rhapsody, YouTube streams, my Slingbox, etc. In XP, there's no problem 
separating these streams from JFW, but I can't do it in 7. Maybe the Mac is the 
way to go. 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org