Re: [PD] How to read I2C sensors?
Sounds great! I'll have to get the sensors first now (I was waiting to see if it would work at all) and see how far I'll get with it. Thanks Ingo Von: Ivica Bukvic [mailto:i...@vt.edu] Gesendet: Sonntag, 27. April 2014 23:27 An: Ingo Cc: Alexandros Drymonitis; pd-list Betreff: Re: AW: [PD] How to read I2C sensors? Check out also pd-l2ork k12 documentation where you can learn more about lots of pots RPi shield that gives you essentially 8 capacitive channels via the aforesaid mcp3008 d/a chip. This is what pd-l2ork essentially supports out of box. To access k12 mode start it with appropriate shortcut or simply type pd-l2ork -k12 HTH On Apr 27, 2014 3:52 PM, Ingo i...@miamiwave.com wrote: Thanks Ivica, I'll check out pd-l2ork. I might use a Raspberry Pi for that purpose anyway. I need some capacitive sensors that work without actually touching them. All I found was using I2C. Ingo Von: Ivica Bukvic [mailto:i...@vt.edu] Gesendet: Sonntag, 27. April 2014 20:38 An: Ingo Cc: Alexandros Drymonitis; pd-list Betreff: Re: [PD] How to read I2C sensors? I forget what i2c uses driverwise, but if it is spidev, in pd-l2ork you have disis_spi external that allows for reading data from mcp3008 8-channel ad converter. The external is specifically designed for Raspberry Pi build of pd-l2ork, but I don't see a reason why it could not be compiled for vanilla Pd as well. Perhaps it can be also used with your setup? On Apr 27, 2014 1:53 PM, Ingo i...@miamiwave.com wrote: Thanks! Could be a possibility but I was hoping for an object that would be able to read I2C directly without adding an arduino since most smaller arm boards do have some I2C pins onboard. Ingo Von: Alexandros Drymonitis [mailto:adr...@gmail.com] Gesendet: Sonntag, 27. April 2014 19:00 An: Ingo Cc: pd-list Betreff: Re: [PD] How to read I2C sensors? What if you use the Wire library in Arduino and then collect the info in Pd with [comport]? On Sun, Apr 27, 2014 at 2:06 PM, Ingo i...@miamiwave.com wrote: I have been using an arduino with [comport] (pduino) to read out sensors so far and want to use a I2C sensor board for some other sensors soon. Can [comport] connect to the I2C interface or is there another object in Pd-extended that can do that? Thanks! Ingo ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
[PD] How to read I2C sensors?
I have been using an arduino with [comport] (pduino) to read out sensors so far and want to use a I2C sensor board for some other sensors soon. Can [comport] connect to the I2C interface or is there another object in Pd-extended that can do that? Thanks! Ingo ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] How to read I2C sensors?
What if you use the Wire library in Arduino and then collect the info in Pd with [comport]? On Sun, Apr 27, 2014 at 2:06 PM, Ingo i...@miamiwave.com wrote: I have been using an arduino with [comport] (pduino) to read out sensors so far and want to use a I2C sensor board for some other sensors soon. Can [comport] connect to the I2C interface or is there another object in Pd-extended that can do that? Thanks! Ingo ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] How to read I2C sensors?
Thanks! Could be a possibility but I was hoping for an object that would be able to read I2C directly without adding an arduino since most smaller arm boards do have some I2C pins onboard. Ingo Von: Alexandros Drymonitis [mailto:adr...@gmail.com] Gesendet: Sonntag, 27. April 2014 19:00 An: Ingo Cc: pd-list Betreff: Re: [PD] How to read I2C sensors? What if you use the Wire library in Arduino and then collect the info in Pd with [comport]? On Sun, Apr 27, 2014 at 2:06 PM, Ingo i...@miamiwave.com wrote: I have been using an arduino with [comport] (pduino) to read out sensors so far and want to use a I2C sensor board for some other sensors soon. Can [comport] connect to the I2C interface or is there another object in Pd-extended that can do that? Thanks! Ingo ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] How to read I2C sensors?
I forget what i2c uses driverwise, but if it is spidev, in pd-l2ork you have disis_spi external that allows for reading data from mcp3008 8-channel ad converter. The external is specifically designed for Raspberry Pi build of pd-l2ork, but I don't see a reason why it could not be compiled for vanilla Pd as well. Perhaps it can be also used with your setup? On Apr 27, 2014 1:53 PM, Ingo i...@miamiwave.com wrote: Thanks! Could be a possibility but I was hoping for an object that would be able to read I2C directly without adding an arduino since most smaller arm boards do have some I2C pins onboard. Ingo Von: Alexandros Drymonitis [mailto:adr...@gmail.com] Gesendet: Sonntag, 27. April 2014 19:00 An: Ingo Cc: pd-list Betreff: Re: [PD] How to read I2C sensors? What if you use the Wire library in Arduino and then collect the info in Pd with [comport]? On Sun, Apr 27, 2014 at 2:06 PM, Ingo i...@miamiwave.com wrote: I have been using an arduino with [comport] (pduino) to read out sensors so far and want to use a I2C sensor board for some other sensors soon. Can [comport] connect to the I2C interface or is there another object in Pd-extended that can do that? Thanks! Ingo ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] How to read I2C sensors?
Thanks Ivica, I'll check out pd-l2ork. I might use a Raspberry Pi for that purpose anyway. I need some capacitive sensors that work without actually touching them. All I found was using I2C. Ingo Von: Ivica Bukvic [mailto:i...@vt.edu] Gesendet: Sonntag, 27. April 2014 20:38 An: Ingo Cc: Alexandros Drymonitis; pd-list Betreff: Re: [PD] How to read I2C sensors? I forget what i2c uses driverwise, but if it is spidev, in pd-l2ork you have disis_spi external that allows for reading data from mcp3008 8-channel ad converter. The external is specifically designed for Raspberry Pi build of pd-l2ork, but I don't see a reason why it could not be compiled for vanilla Pd as well. Perhaps it can be also used with your setup? On Apr 27, 2014 1:53 PM, Ingo i...@miamiwave.com wrote: Thanks! Could be a possibility but I was hoping for an object that would be able to read I2C directly without adding an arduino since most smaller arm boards do have some I2C pins onboard. Ingo Von: Alexandros Drymonitis [mailto:adr...@gmail.com] Gesendet: Sonntag, 27. April 2014 19:00 An: Ingo Cc: pd-list Betreff: Re: [PD] How to read I2C sensors? What if you use the Wire library in Arduino and then collect the info in Pd with [comport]? On Sun, Apr 27, 2014 at 2:06 PM, Ingo i...@miamiwave.com wrote: I have been using an arduino with [comport] (pduino) to read out sensors so far and want to use a I2C sensor board for some other sensors soon. Can [comport] connect to the I2C interface or is there another object in Pd-extended that can do that? Thanks! Ingo ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] How to read I2C sensors?
On 2014-04-27 13:52, Ingo wrote: Thanks! Could be a possibility but I was hoping for an object that would be able to read I2C directly without adding an arduino since most smaller arm boards do have some I2C pins onboard. If the machine Pd is running on has an I2C port and is running linux then you can use spidev to access it. Otherwise you need to use a serial connection to an off-board microcontroller like the arduino or teensy or FRDM-KL25Z to relay messages between the I2C and USB serial connections. A lot of motherboards have I2C but it's mainly used for the temperature sensors and you don't get access via any header. Ingo Von: Alexandros Drymonitis [mailto:adr...@gmail.com] Gesendet: Sonntag, 27. April 2014 19:00 An: Ingo Cc: pd-list Betreff: Re: [PD] How to read I2C sensors? What if you use the Wire library in Arduino and then collect the info in Pd with [comport]? On Sun, Apr 27, 2014 at 2:06 PM, Ingo i...@miamiwave.com wrote: I have been using an arduino with [comport] (pduino) to read out sensors so far and want to use a I2C sensor board for some other sensors soon. Can [comport] connect to the I2C interface or is there another object in Pd-extended that can do that? Thanks! Ingo ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] How to read I2C sensors?
Check out also pd-l2ork k12 documentation where you can learn more about lots of pots RPi shield that gives you essentially 8 capacitive channels via the aforesaid mcp3008 d/a chip. This is what pd-l2ork essentially supports out of box. To access k12 mode start it with appropriate shortcut or simply type pd-l2ork -k12 HTH On Apr 27, 2014 3:52 PM, Ingo i...@miamiwave.com wrote: Thanks Ivica, I'll check out pd-l2ork. I might use a Raspberry Pi for that purpose anyway. I need some capacitive sensors that work without actually touching them. All I found was using I2C. Ingo Von: Ivica Bukvic [mailto:i...@vt.edu] Gesendet: Sonntag, 27. April 2014 20:38 An: Ingo Cc: Alexandros Drymonitis; pd-list Betreff: Re: [PD] How to read I2C sensors? I forget what i2c uses driverwise, but if it is spidev, in pd-l2ork you have disis_spi external that allows for reading data from mcp3008 8-channel ad converter. The external is specifically designed for Raspberry Pi build of pd-l2ork, but I don't see a reason why it could not be compiled for vanilla Pd as well. Perhaps it can be also used with your setup? On Apr 27, 2014 1:53 PM, Ingo i...@miamiwave.com wrote: Thanks! Could be a possibility but I was hoping for an object that would be able to read I2C directly without adding an arduino since most smaller arm boards do have some I2C pins onboard. Ingo Von: Alexandros Drymonitis [mailto:adr...@gmail.com] Gesendet: Sonntag, 27. April 2014 19:00 An: Ingo Cc: pd-list Betreff: Re: [PD] How to read I2C sensors? What if you use the Wire library in Arduino and then collect the info in Pd with [comport]? On Sun, Apr 27, 2014 at 2:06 PM, Ingo i...@miamiwave.com wrote: I have been using an arduino with [comport] (pduino) to read out sensors so far and want to use a I2C sensor board for some other sensors soon. Can [comport] connect to the I2C interface or is there another object in Pd-extended that can do that? Thanks! Ingo ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
