Re: [PD] jack and callbacks
Hi, * Miller Puckette m...@ucsd.edu [2014-03-04 04:16]: The callback flag instructs the Pd scheduler to run within callbacks from the audio system; otherwise the audio system might still be opened in callback mode (in portaudio or jack) or not (in alsa or mmio) but if yes, the scheduler and the callback routine communicate via FIFOs... I chose whichever seemed to allow the lowest latency, which depends on the system. Yes, it is good to have that choice. Is there a way to enable this worthy parameter from the command line or perhaps a way of setting it statically, maybe in s_audio_jack.c? all the best, P ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] jack and callbacks
Trying to have the lowest latency with Jack / Linux / 64bit / RT kernel / 48000 / 3 / 64. So should I use this too? ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] jack and callbacks
* pured...@11h11.com pured...@11h11.com [2014-03-04 23:05]: Trying to have the lowest latency with Jack / Linux / 64bit / RT kernel / 48000 / 3 / 64. So should I use this too? Best see for yourself if it has an advantage on your system or not. Seems hard to give a generaizable recommendation on using it or not. bestP ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
[PD] jack and callbacks
Hi, just learned that my Pd vanilla Pd-0.45.0 from Miller's Git sources works much better (less drop outs, etc) under jack when enabling use callbacks. Is there a way to enable this worthy parameter from the command line? Perhaps a way of setting it statically, maybe in s_audio_jack.c ? Thank you and enjoy! Peter ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] jack and callbacks
On 03/03/2014 07:44 PM, Peter P. wrote: Hi, just learned that my Pd vanilla Pd-0.45.0 from Miller's Git sources works much better (less drop outs, etc) under jack when enabling use callbacks. Is there a way to enable this worthy parameter from the command line? Perhaps a way of setting it statically, maybe in s_audio_jack.c ? Is there any documentation about enable callbacks outside of being littered throughout the list? Two more questions: Isn't Jack's API callback-based? What does it mean to use Jack without enabling callbacks? -Jonathan Thank you and enjoy! Peter ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] jack and callbacks
The callback flag instructs the Pd scheduler to run within callbacks from the audio system; otherwise the audio system might still be opened in callback mode (in portaudio or jack) or not (in alsa or mmio) but if yes, the scheduler and the callback routine communicate via FIFOs... I chose whichever seemed to allow the lowest latency, which depends on the system. cheers M On Mon, Mar 03, 2014 at 08:23:07PM -0500, Jonathan Wilkes wrote: On 03/03/2014 07:44 PM, Peter P. wrote: Hi, just learned that my Pd vanilla Pd-0.45.0 from Miller's Git sources works much better (less drop outs, etc) under jack when enabling use callbacks. Is there a way to enable this worthy parameter from the command line? Perhaps a way of setting it statically, maybe in s_audio_jack.c ? Is there any documentation about enable callbacks outside of being littered throughout the list? Two more questions: Isn't Jack's API callback-based? What does it mean to use Jack without enabling callbacks? -Jonathan Thank you and enjoy! Peter ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] jack periods 32 = no pd
* Peter P. p8...@aol.com [2014-01-28 00:35]: * Miller Puckette m...@ucsd.edu [2014-01-28 00:02]: Probably that's so - but Pd should still be able to deal with the mismatch. OTOH, since Pd is built-in 64 blocksize, you wouldn't be able to reduce Pd's latency by reducing jack's blocksize below 64. Allright, then I can live without going lower. I'm not sure about this, but I believe that Pd running standalone (using ALSA driver) can achieve as low or perhaps slightly lower latency than Pd running under jack. This is only of interest if Pd's the only audio application you're running on that particular audio interface, however. I can currently start pd using -alsa -rt -audiobuf 2 and get click-free performance, as long as I don't the classic Select all.. and move things around in Tcl/Tk, which of course causes drop-outs. Haven't measured latency with that setup yet, but it sure sounds promising. Using the oss emulation of alsa works too, but slightly more clicks when moving objects on the canvas. Made a latency test with pd's own latency testing patch /usr/local/lib/pd/doc/7.stuff/tools/latency.pd -alsa -rt -audiobuf 2 -channels 18 on an HDSPe card with Multiface and a loopback analogue cable gives 6.5ms, which I consider great! Interestingly Pd gives this latency value regardless of setting -audiobuf to values 1-6, which I suppose is because of rounding this value to something usable by the dsp part. Pd also reports on startup ...buffer_time 2902 us opened using mmap audio interface Now what is weird, is that I can't get clean audio under alsa with any values larger than -audiobuf 6. The sound is very distorted. Using the -oss emulation and -rt, clean audio is available for values larger than -audiobuf 2 such as: -audiobuf 3 with measured latency of 7.9ms (Pd choses blocksze 56) -audiobuf 5 with measured latency of 9.4ms (Pd choses blocksze 56) -audiobuf 6 with measured latency of 10.9ms (Pd choses blocksze 56) and so on. Oh this is on a Debian system running kernel 3.2.0-4-rt-amd64 Nice that Pd can do so low latencies, but that's a strange thing about alsa though... best, P ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] jack periods 32 = no pd
OK... that's really quite strange indeed. FWIW the 'mmap' alsa code, as far as I know, is only selected for RME devices. I don't have any of those handy so have little way to check any of this on my end. It was written by Winfried Ritsch a decade or more ago :) Miller Made a latency test with pd's own latency testing patch /usr/local/lib/pd/doc/7.stuff/tools/latency.pd -alsa -rt -audiobuf 2 -channels 18 on an HDSPe card with Multiface and a loopback analogue cable gives 6.5ms, which I consider great! Interestingly Pd gives this latency value regardless of setting -audiobuf to values 1-6, which I suppose is because of rounding this value to something usable by the dsp part. Pd also reports on startup ...buffer_time 2902 us opened using mmap audio interface Now what is weird, is that I can't get clean audio under alsa with any values larger than -audiobuf 6. The sound is very distorted. Using the -oss emulation and -rt, clean audio is available for values larger than -audiobuf 2 such as: -audiobuf 3 with measured latency of 7.9ms (Pd choses blocksze 56) -audiobuf 5 with measured latency of 9.4ms (Pd choses blocksze 56) -audiobuf 6 with measured latency of 10.9ms (Pd choses blocksze 56) and so on. Oh this is on a Debian system running kernel 3.2.0-4-rt-amd64 Nice that Pd can do so low latencies, but that's a strange thing about alsa though... best, P ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
[PD] jack periods 32 = no pd
hi, in my quest of lowering my round-trip latency, I am configuring Jack with: periods (buffer size): 32; nperiods: 2 / 3 (doesn't matter); rate 48000 when starting pd -rt -jack -channels 2 (-nosleep) = doesn't start. other applications like amsynth, JAMin doesn't have this behaviour (they works). when using periods 64 then pd works. ? ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] jack periods 32 = no pd
* pured...@11h11.com pured...@11h11.com [2014-01-27 19:54]: hi, in my quest of lowering my round-trip latency, I am configuring Jack with: periods (buffer size): 32; nperiods: 2 / 3 (doesn't matter); rate 48000 when starting pd -rt -jack -channels 2 (-nosleep) = doesn't start. other applications like amsynth, JAMin doesn't have this behaviour (they works). when using periods 64 then pd works. i think I had the same problem recently, is there an error message output, possibly to the console when you start pd with 23 periods? Probably to the terminal upon starting pd from therein? I didn't find a solution yet, I must say. best, P ? ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] jack periods 32 = no pd
pd -rt -jack -channels 2 priority 6 scheduling enabled. priority 8 scheduling enabled. Partial read Partial read ... pd: malloc.c:3822: _int_malloc: Assertion `(unsigned long)(size) = (unsigned long)(nb)' failed. Pd: signal 6 psc@pscbox:~$ pdsend errorname: error writing sock8: broken pipe pdsend errorname: error writing sock8: broken pipe ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] jack periods 32 = no pd
* pured...@11h11.com pured...@11h11.com [2014-01-27 21:24]: pd -rt -jack -channels 2 priority 6 scheduling enabled. priority 8 scheduling enabled. Partial read Partial read ... pd: malloc.c:3822: _int_malloc: Assertion `(unsigned long)(size) = (unsigned long)(nb)' failed. Pd: signal 6 psc@pscbox:~$ pdsend errorname: error writing sock8: broken pipe pdsend errorname: error writing sock8: broken pipe Jep, I do get lines of Partial read [...] followed by a Segmentation fault and pdsend errorname: error writing sock7: broken pipe Here's a backtrace from within gdb: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x77f9b700 (LWP 22956)] 0x76afc790 in ?? () from /lib/x86_64-linux-gnu/libc.so.6 (gdb) bt #0 0x76afc790 in ?? () from /lib/x86_64-linux-gnu/libc.so.6 #1 0x004f1428 in pollprocess () #2 0x775d1dbf in ?? () from /usr/lib/x86_64-linux-gnu/libjack.so.0 #3 0x77184e0e in start_thread () from /lib/x86_64-linux-gnu/libpthread.so.0 #4 0x76aae0fd in clone () from /lib/x86_64-linux-gnu/libc.so.6 I hope this is useful to anyone. best, P ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] jack periods 32 = no pd
Probably that's so - but Pd should still be able to deal with the mismatch. OTOH, since Pd is built-in 64 blocksize, you wouldn't be able to reduce Pd's latency by reducing jack's blocksize below 64. I'm not sure about this, but I believe that Pd running standalone (using ALSA driver) can achieve as low or perhaps slightly lower latency than Pd running under jack. This is only of interest if Pd's the only audio application you're running on that particular audio interface, however. cheers Miller On Tue, Jan 28, 2014 at 12:33:43AM -0500, pured...@11h11.com wrote: hum i might have an idea why: is it because pd works in 64 blocks? ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] jack periods 32 = no pd
* Miller Puckette m...@ucsd.edu [2014-01-28 00:02]: Probably that's so - but Pd should still be able to deal with the mismatch. OTOH, since Pd is built-in 64 blocksize, you wouldn't be able to reduce Pd's latency by reducing jack's blocksize below 64. Allright, then I can live without going lower. I'm not sure about this, but I believe that Pd running standalone (using ALSA driver) can achieve as low or perhaps slightly lower latency than Pd running under jack. This is only of interest if Pd's the only audio application you're running on that particular audio interface, however. I can currently start pd using -alsa -rt -audiobuf 2 and get click-free performance, as long as I don't the classic Select all.. and move things around in Tcl/Tk, which of course causes drop-outs. Haven't measured latency with that setup yet, but it sure sounds promising. Using the oss emulation of alsa works too, but slightly more clicks when moving objects on the canvas. best, P ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
People I made a very stupid mistake..! :/ hehehehehe Jack don't need a new pd-extended compilation to work together. Jack run over asio driver in windows. All software with asio support can see jackrouter in asio on driver settings. I have tested it with pd-extended 0.43.4 windows version downloaded today 14/03/2013 and Live 8 and Live 9. The unique specificity is that in Live 8, we need to run all in administrator mode, jack and pd-extended. ps.: in last pd-extended 0.43.4 version at this moment I can't see any problem has as happening in wild compilation. 2013/2/11 Hans-Christoph Steiner h...@at.or.at The 0.44.0 nightly builds include Jack for Windows support, if you want to try. .hc On Feb 3, 2013, at 8:12 PM, Esteban Viveros wrote: The 0.44 are working with jack? I can test it..(?) 2013/2/3 Hans-Christoph Steiner h...@at.or.at That's a bummer, but I don't think this story is over, so leave the wiki. I think that Jack on Windows is relatively new, so its going to have little problems. And through contributions like yours, it will get better. For example, I included the jack for windows stuff in pd-extended 0.44, so the nightly builds should include it starting tomorrow: http://autobuild.puredata.info/auto-build/2013-02-04/ .hc On 02/03/2013 07:20 PM, Esteban Viveros wrote: ok... I yeld... That solution don't work well yet.. When I disable UAC settings in Windows the only thing happend is the app can start itself in administrator mode... The problem is when I run pd in administrator mode, it are bugged... It can't load objects correctly like a video I send previously. Is the best thing delete the wiki?? 2013/1/28 Esteban Viveros emvive...@gmail.com Ok.. Now we have some information on wiki page.. http://puredata.info/docs/PdExtended0434JackAbletonLive8 Ready to changes..! ;) 2013/1/28 Hans-Christoph Steiner h...@at.or.at This is great! Could you create a wiki page here and put the info there? That's an easy place for people to find it when they are trying to set it up themselves. http://puredata.info/docs/ .hc On 01/28/2013 12:56 PM, Esteban Viveros wrote: At this moment I can use ableton live and pd with jack with a custom compiled version of pd-extended.. You can try in your setup and relate if that work or you too.. You need: pd-extended jack built: https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit Jack Audio: *Mixed 64/32 bit JACK 1.9.9* in http://jackaudio.org/download Read this: To install Jack: http://jackaudio.org/jack_on_windows Probably you need Asio4All, at now the website of asio4all is out, but you can download it here for example: http://asio4all.softonic.com.br/ After uncompress pd-extended, install correctly jack, you need to change UAC settings in your windows. In my case I'm using Windows 7 x64, and it solve all the problems with Ableton Live, Jack and pd sync. To change UAC settings (disabling): http://www.petri.co.il/disable-uac-in-windows-7.htm Hope it's works! 2013/1/28 batinste dwanaf...@yahoo.fr pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868
Re: [PD] Jack support on Windows
The 0.44.0 nightly builds include Jack for Windows support, if you want to try. .hc On Feb 3, 2013, at 8:12 PM, Esteban Viveros wrote: The 0.44 are working with jack? I can test it..(?) 2013/2/3 Hans-Christoph Steiner h...@at.or.at That's a bummer, but I don't think this story is over, so leave the wiki. I think that Jack on Windows is relatively new, so its going to have little problems. And through contributions like yours, it will get better. For example, I included the jack for windows stuff in pd-extended 0.44, so the nightly builds should include it starting tomorrow: http://autobuild.puredata.info/auto-build/2013-02-04/ .hc On 02/03/2013 07:20 PM, Esteban Viveros wrote: ok... I yeld... That solution don't work well yet.. When I disable UAC settings in Windows the only thing happend is the app can start itself in administrator mode... The problem is when I run pd in administrator mode, it are bugged... It can't load objects correctly like a video I send previously. Is the best thing delete the wiki?? 2013/1/28 Esteban Viveros emvive...@gmail.com Ok.. Now we have some information on wiki page.. http://puredata.info/docs/PdExtended0434JackAbletonLive8 Ready to changes..! ;) 2013/1/28 Hans-Christoph Steiner h...@at.or.at This is great! Could you create a wiki page here and put the info there? That's an easy place for people to find it when they are trying to set it up themselves. http://puredata.info/docs/ .hc On 01/28/2013 12:56 PM, Esteban Viveros wrote: At this moment I can use ableton live and pd with jack with a custom compiled version of pd-extended.. You can try in your setup and relate if that work or you too.. You need: pd-extended jack built: https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit Jack Audio: *Mixed 64/32 bit JACK 1.9.9* in http://jackaudio.org/download Read this: To install Jack: http://jackaudio.org/jack_on_windows Probably you need Asio4All, at now the website of asio4all is out, but you can download it here for example: http://asio4all.softonic.com.br/ After uncompress pd-extended, install correctly jack, you need to change UAC settings in your windows. In my case I'm using Windows 7 x64, and it solve all the problems with Ableton Live, Jack and pd sync. To change UAC settings (disabling): http://www.petri.co.il/disable-uac-in-windows-7.htm Hope it's works! 2013/1/28 batinste dwanaf...@yahoo.fr pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___pd-l...@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art
Re: [PD] Jack support on Windows
ok... I yeld... That solution don't work well yet.. When I disable UAC settings in Windows the only thing happend is the app can start itself in administrator mode... The problem is when I run pd in administrator mode, it are bugged... It can't load objects correctly like a video I send previously. Is the best thing delete the wiki?? 2013/1/28 Esteban Viveros emvive...@gmail.com Ok.. Now we have some information on wiki page.. http://puredata.info/docs/PdExtended0434JackAbletonLive8 Ready to changes..! ;) 2013/1/28 Hans-Christoph Steiner h...@at.or.at This is great! Could you create a wiki page here and put the info there? That's an easy place for people to find it when they are trying to set it up themselves. http://puredata.info/docs/ .hc On 01/28/2013 12:56 PM, Esteban Viveros wrote: At this moment I can use ableton live and pd with jack with a custom compiled version of pd-extended.. You can try in your setup and relate if that work or you too.. You need: pd-extended jack built: https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit Jack Audio: *Mixed 64/32 bit JACK 1.9.9* in http://jackaudio.org/download Read this: To install Jack: http://jackaudio.org/jack_on_windows Probably you need Asio4All, at now the website of asio4all is out, but you can download it here for example: http://asio4all.softonic.com.br/ After uncompress pd-extended, install correctly jack, you need to change UAC settings in your windows. In my case I'm using Windows 7 x64, and it solve all the problems with Ableton Live, Jack and pd sync. To change UAC settings (disabling): http://www.petri.co.il/disable-uac-in-windows-7.htm Hope it's works! 2013/1/28 batinste dwanaf...@yahoo.fr pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___pd-l...@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
That's a bummer, but I don't think this story is over, so leave the wiki. I think that Jack on Windows is relatively new, so its going to have little problems. And through contributions like yours, it will get better. For example, I included the jack for windows stuff in pd-extended 0.44, so the nightly builds should include it starting tomorrow: http://autobuild.puredata.info/auto-build/2013-02-04/ .hc On 02/03/2013 07:20 PM, Esteban Viveros wrote: ok... I yeld... That solution don't work well yet.. When I disable UAC settings in Windows the only thing happend is the app can start itself in administrator mode... The problem is when I run pd in administrator mode, it are bugged... It can't load objects correctly like a video I send previously. Is the best thing delete the wiki?? 2013/1/28 Esteban Viveros emvive...@gmail.com Ok.. Now we have some information on wiki page.. http://puredata.info/docs/PdExtended0434JackAbletonLive8 Ready to changes..! ;) 2013/1/28 Hans-Christoph Steiner h...@at.or.at This is great! Could you create a wiki page here and put the info there? That's an easy place for people to find it when they are trying to set it up themselves. http://puredata.info/docs/ .hc On 01/28/2013 12:56 PM, Esteban Viveros wrote: At this moment I can use ableton live and pd with jack with a custom compiled version of pd-extended.. You can try in your setup and relate if that work or you too.. You need: pd-extended jack built: https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit Jack Audio: *Mixed 64/32 bit JACK 1.9.9* in http://jackaudio.org/download Read this: To install Jack: http://jackaudio.org/jack_on_windows Probably you need Asio4All, at now the website of asio4all is out, but you can download it here for example: http://asio4all.softonic.com.br/ After uncompress pd-extended, install correctly jack, you need to change UAC settings in your windows. In my case I'm using Windows 7 x64, and it solve all the problems with Ableton Live, Jack and pd sync. To change UAC settings (disabling): http://www.petri.co.il/disable-uac-in-windows-7.htm Hope it's works! 2013/1/28 batinste dwanaf...@yahoo.fr pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___pd-l...@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
The 0.44 are working with jack? I can test it..(?) 2013/2/3 Hans-Christoph Steiner h...@at.or.at That's a bummer, but I don't think this story is over, so leave the wiki. I think that Jack on Windows is relatively new, so its going to have little problems. And through contributions like yours, it will get better. For example, I included the jack for windows stuff in pd-extended 0.44, so the nightly builds should include it starting tomorrow: http://autobuild.puredata.info/auto-build/2013-02-04/ .hc On 02/03/2013 07:20 PM, Esteban Viveros wrote: ok... I yeld... That solution don't work well yet.. When I disable UAC settings in Windows the only thing happend is the app can start itself in administrator mode... The problem is when I run pd in administrator mode, it are bugged... It can't load objects correctly like a video I send previously. Is the best thing delete the wiki?? 2013/1/28 Esteban Viveros emvive...@gmail.com Ok.. Now we have some information on wiki page.. http://puredata.info/docs/PdExtended0434JackAbletonLive8 Ready to changes..! ;) 2013/1/28 Hans-Christoph Steiner h...@at.or.at This is great! Could you create a wiki page here and put the info there? That's an easy place for people to find it when they are trying to set it up themselves. http://puredata.info/docs/ .hc On 01/28/2013 12:56 PM, Esteban Viveros wrote: At this moment I can use ableton live and pd with jack with a custom compiled version of pd-extended.. You can try in your setup and relate if that work or you too.. You need: pd-extended jack built: https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit Jack Audio: *Mixed 64/32 bit JACK 1.9.9* in http://jackaudio.org/download Read this: To install Jack: http://jackaudio.org/jack_on_windows Probably you need Asio4All, at now the website of asio4all is out, but you can download it here for example: http://asio4all.softonic.com.br/ After uncompress pd-extended, install correctly jack, you need to change UAC settings in your windows. In my case I'm using Windows 7 x64, and it solve all the problems with Ableton Live, Jack and pd sync. To change UAC settings (disabling): http://www.petri.co.il/disable-uac-in-windows-7.htm Hope it's works! 2013/1/28 batinste dwanaf...@yahoo.fr pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___Pd-list@iem.atmailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125
Re: [PD] Jack support on Windows
That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at mailto:h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com mailto:emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailto:Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
At this moment I can use ableton live and pd with jack with a custom compiled version of pd-extended.. You can try in your setup and relate if that work or you too.. You need: pd-extended jack built: https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit Jack Audio: *Mixed 64/32 bit JACK 1.9.9* in http://jackaudio.org/download Read this: To install Jack: http://jackaudio.org/jack_on_windows Probably you need Asio4All, at now the website of asio4all is out, but you can download it here for example: http://asio4all.softonic.com.br/ After uncompress pd-extended, install correctly jack, you need to change UAC settings in your windows. In my case I'm using Windows 7 x64, and it solve all the problems with Ableton Live, Jack and pd sync. To change UAC settings (disabling): http://www.petri.co.il/disable-uac-in-windows-7.htm Hope it's works! 2013/1/28 batinste dwanaf...@yahoo.fr pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___pd-l...@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
This is great! Could you create a wiki page here and put the info there? That's an easy place for people to find it when they are trying to set it up themselves. http://puredata.info/docs/ .hc On 01/28/2013 12:56 PM, Esteban Viveros wrote: At this moment I can use ableton live and pd with jack with a custom compiled version of pd-extended.. You can try in your setup and relate if that work or you too.. You need: pd-extended jack built: https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit Jack Audio: *Mixed 64/32 bit JACK 1.9.9* in http://jackaudio.org/download Read this: To install Jack: http://jackaudio.org/jack_on_windows Probably you need Asio4All, at now the website of asio4all is out, but you can download it here for example: http://asio4all.softonic.com.br/ After uncompress pd-extended, install correctly jack, you need to change UAC settings in your windows. In my case I'm using Windows 7 x64, and it solve all the problems with Ableton Live, Jack and pd sync. To change UAC settings (disabling): http://www.petri.co.il/disable-uac-in-windows-7.htm Hope it's works! 2013/1/28 batinste dwanaf...@yahoo.fr pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___pd-l...@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Of course! I try to do that now.. 2013/1/28 Hans-Christoph Steiner h...@at.or.at This is great! Could you create a wiki page here and put the info there? That's an easy place for people to find it when they are trying to set it up themselves. http://puredata.info/docs/ .hc On 01/28/2013 12:56 PM, Esteban Viveros wrote: At this moment I can use ableton live and pd with jack with a custom compiled version of pd-extended.. You can try in your setup and relate if that work or you too.. You need: pd-extended jack built: https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit Jack Audio: *Mixed 64/32 bit JACK 1.9.9* in http://jackaudio.org/download Read this: To install Jack: http://jackaudio.org/jack_on_windows Probably you need Asio4All, at now the website of asio4all is out, but you can download it here for example: http://asio4all.softonic.com.br/ After uncompress pd-extended, install correctly jack, you need to change UAC settings in your windows. In my case I'm using Windows 7 x64, and it solve all the problems with Ableton Live, Jack and pd sync. To change UAC settings (disabling): http://www.petri.co.il/disable-uac-in-windows-7.htm Hope it's works! 2013/1/28 batinste dwanaf...@yahoo.fr pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___pd-l...@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Oh, i've been using Pd AND Live together for some time now, it works quite ok with the 42.5 (AFAIR). I understand that i shouldn't update Pd to the most recent one if i want my setup to keep on working :/ I meant Pd IN Live, aka pdvst, would be cool if it were effortless (no wild build for starters, recent version) On 28/01/2013 18:56, Esteban Viveros wrote: At this moment I can use ableton live and pd with jack with a custom compiled version of pd-extended.. You can try in your setup and relate if that work or you too.. You need: pd-extended jack built: https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit Jack Audio: _Mixed 64/32 bit JACK 1.9.9_ in http://jackaudio.org/download Read this: To install Jack: http://jackaudio.org/jack_on_windows Probably you need Asio4All, at now the website of asio4all is out, but you can download it here for example: http://asio4all.softonic.com.br/ After uncompress pd-extended, install correctly jack, you need to change UAC settings in your windows. In my case I'm using Windows 7 x64, and it solve all the problems with Ableton Live, Jack and pd sync. To change UAC settings (disabling): http://www.petri.co.il/disable-uac-in-windows-7.htm Hope it's works! 2013/1/28 batinste dwanaf...@yahoo.fr mailto:dwanaf...@yahoo.fr pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at mailto:h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com mailto:emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailto:Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 tel:%2827%29%208815%207170 (27) 3066 0359 tel:%2827%29%203066%200359 (11) 95761 4125 tel:%2811%29%2095761%204125 (11) 2738 7868 tel:%2811%29%202738%207868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailto:Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Yeah.. I understand now.. And I agree. This happend because pd-extended 0.43.4 version don't have jack support included. But it can change in 0.44 version. But at this moment, that's working for me. For starters a stable version working with jack I think we only have 0.42.5 version. But for adventurers.. ;) 2013/1/28 batinste dwanaf...@yahoo.fr Oh, i've been using Pd AND Live together for some time now, it works quite ok with the 42.5 (AFAIR). I understand that i shouldn't update Pd to the most recent one if i want my setup to keep on working :/ I meant Pd IN Live, aka pdvst, would be cool if it were effortless (no wild build for starters, recent version) On 28/01/2013 18:56, Esteban Viveros wrote: At this moment I can use ableton live and pd with jack with a custom compiled version of pd-extended.. You can try in your setup and relate if that work or you too.. You need: pd-extended jack built: https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit Jack Audio: *Mixed 64/32 bit JACK 1.9.9* in http://jackaudio.org/download Read this: To install Jack: http://jackaudio.org/jack_on_windows Probably you need Asio4All, at now the website of asio4all is out, but you can download it here for example: http://asio4all.softonic.com.br/ After uncompress pd-extended, install correctly jack, you need to change UAC settings in your windows. In my case I'm using Windows 7 x64, and it solve all the problems with Ableton Live, Jack and pd sync. To change UAC settings (disabling): http://www.petri.co.il/disable-uac-in-windows-7.htm Hope it's works! 2013/1/28 batinste dwanaf...@yahoo.fr pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 %2827%29%208815%207170 (27) 3066 0359 %2827%29%203066%200359 (11) 95761 4125 %2811%29%2095761%204125 (11) 2738 7868 %2811%29%202738%207868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___pd-l...@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
idea: lobby bitwig to put Pd inside. it already supports jack http://www.bitwig.com/faqs.html Am 28.01.2013 um 19:50 schrieb batinste dwanaf...@yahoo.fr: Oh, i've been using Pd AND Live together for some time now, it works quite ok with the 42.5 (AFAIR). I understand that i shouldn't update Pd to the most recent one if i want my setup to keep on working :/ I meant Pd IN Live, aka pdvst, would be cool if it were effortless (no wild build for starters, recent version) On 28/01/2013 18:56, Esteban Viveros wrote: At this moment I can use ableton live and pd with jack with a custom compiled version of pd-extended.. You can try in your setup and relate if that work or you too.. You need: pd-extended jack built: https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit Jack Audio: Mixed 64/32 bit JACK 1.9.9 in http://jackaudio.org/download Read this: To install Jack: http://jackaudio.org/jack_on_windows Probably you need Asio4All, at now the website of asio4all is out, but you can download it here for example: http://asio4all.softonic.com.br/ After uncompress pd-extended, install correctly jack, you need to change UAC settings in your windows. In my case I'm using Windows 7 x64, and it solve all the problems with Ableton Live, Jack and pd sync. To change UAC settings (disabling): http://www.petri.co.il/disable-uac-in-windows-7.htm Hope it's works! 2013/1/28 batinste dwanaf...@yahoo.fr pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Ohh!! Bitwig!! About 2 years I dream with this software!! 2013/1/28 Max abonneme...@revolwear.com idea: lobby bitwig to put Pd inside. it already supports jack http://www.bitwig.com/faqs.html Am 28.01.2013 um 19:50 schrieb batinste dwanaf...@yahoo.fr: Oh, i've been using Pd AND Live together for some time now, it works quite ok with the 42.5 (AFAIR). I understand that i shouldn't update Pd to the most recent one if i want my setup to keep on working :/ I meant Pd IN Live, aka pdvst, would be cool if it were effortless (no wild build for starters, recent version) On 28/01/2013 18:56, Esteban Viveros wrote: At this moment I can use ableton live and pd with jack with a custom compiled version of pd-extended.. You can try in your setup and relate if that work or you too.. You need: pd-extended jack built: https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit Jack Audio: Mixed 64/32 bit JACK 1.9.9 in http://jackaudio.org/download Read this: To install Jack: http://jackaudio.org/jack_on_windows Probably you need Asio4All, at now the website of asio4all is out, but you can download it here for example: http://asio4all.softonic.com.br/ After uncompress pd-extended, install correctly jack, you need to change UAC settings in your windows. In my case I'm using Windows 7 x64, and it solve all the problems with Ableton Live, Jack and pd sync. To change UAC settings (disabling): http://www.petri.co.il/disable-uac-in-windows-7.htm Hope it's works! 2013/1/28 batinste dwanaf...@yahoo.fr pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Ok.. Now we have some information on wiki page.. http://puredata.info/docs/PdExtended0434JackAbletonLive8 Ready to changes..! ;) 2013/1/28 Hans-Christoph Steiner h...@at.or.at This is great! Could you create a wiki page here and put the info there? That's an easy place for people to find it when they are trying to set it up themselves. http://puredata.info/docs/ .hc On 01/28/2013 12:56 PM, Esteban Viveros wrote: At this moment I can use ableton live and pd with jack with a custom compiled version of pd-extended.. You can try in your setup and relate if that work or you too.. You need: pd-extended jack built: https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit Jack Audio: *Mixed 64/32 bit JACK 1.9.9* in http://jackaudio.org/download Read this: To install Jack: http://jackaudio.org/jack_on_windows Probably you need Asio4All, at now the website of asio4all is out, but you can download it here for example: http://asio4all.softonic.com.br/ After uncompress pd-extended, install correctly jack, you need to change UAC settings in your windows. In my case I'm using Windows 7 x64, and it solve all the problems with Ableton Live, Jack and pd sync. To change UAC settings (disabling): http://www.petri.co.il/disable-uac-in-windows-7.htm Hope it's works! 2013/1/28 batinste dwanaf...@yahoo.fr pd in Live... I'm drooling. Keep us posted about how well you make it work with a recent pd version, i'm very interested. On 28/01/2013 12:45, Esteban Viveros wrote: That's sound very nice! I will try to install on Ableton pdvst again in the coming days. It will be very good to get everything running cool place .. ;) I will also open a new topic to better organize the topic for future google research .. Ok? 2013/1/27 Hans-Christoph Steiner h...@at.or.at On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___pd-l...@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Hello, on Windows only Jackdmp (Jackd2) is available, but the latest version of Pd-extended (0.43.4-extended) does not work with Jackd2, at least on Debian Wheezy. It may be fixed, when this patch is applied (http://sourceforge.net/tracker/?func=detailatid=478072aid=3582739group_id=55736), because Jackd2 has removed jack_client_new () from their interface. I have found another issue with jackd2, because hardware ports are not reported with the register_port callback, at least not with the way I am using it in my own software (a C#/Mono replacement for QJackCTL https://github.com/residuum/MonoMultiJack), but it probably is an issue in my code. Hth, Thomas On 16.01.2013 18:58, Esteban Viveros wrote: Hello list, Excuse the hassle... But I think this very important .. The windows version of pd-extended 0.43 don't have support to Jack.. It would be great can connect my new pd extended release to ableton live to play a little.. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- We left all that stuff out. If there's an error, we have this routine called panic, and when it is called, the machine crashes, and you holler down the hall, 'Hey, reboot it.' (Dennis Ritchie) http://www.residuum.org/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
On 01/27/2013 10:59 AM, Thomas Mayer wrote: Hello, on Windows only Jackdmp (Jackd2) is available, but the latest version of Pd-extended (0.43.4-extended) does not work with Jackd2, at least on Debian Wheezy. Does Pd-vanilla 0.43 or 0.44? Or does Pd+jackd2 not work anywhere yet? It may be fixed, when this patch is applied (http://sourceforge.net/tracker/?func=detailatid=478072aid=3582739group_id=55736), because Jackd2 has removed jack_client_new () from their interface. That patch is already included Pd-extended 0.43.4, so it won't change Esteban's situation. .hc I have found another issue with jackd2, because hardware ports are not reported with the register_port callback, at least not with the way I am using it in my own software (a C#/Mono replacement for QJackCTL https://github.com/residuum/MonoMultiJack), but it probably is an issue in my code. Hth, Thomas On 16.01.2013 18:58, Esteban Viveros wrote: Hello list, Excuse the hassle... But I think this very important .. The windows version of pd-extended 0.43 don't have support to Jack.. It would be great can connect my new pd extended release to ableton live to play a little.. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
On 27.01.2013 18:09, Hans-Christoph Steiner wrote: On 01/27/2013 10:59 AM, Thomas Mayer wrote: Hello, on Windows only Jackdmp (Jackd2) is available, but the latest version of Pd-extended (0.43.4-extended) does not work with Jackd2, at least on Debian Wheezy. Does Pd-vanilla 0.43 or 0.44? Or does Pd+jackd2 not work anywhere yet? I have not tried Pd vanilla yet, but will try so in the next days and then report back. Best regards, Thomas -- Theoretically, [the amount of money in circulation] is watched carefully by clever, serious economists. In practice, all the world's money is one big swirling, whirling pool. (Cory Doctorow - For The Win) http://www.residuum.org/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
jackdmp has always worked with pd on windows because it has been using ASIO drivers, but with two channels only... also I'm still using pdvst for playing with Ableton Live on windows, if not in debug mode, it's rather stable, and even if it's a 0.37 pd version, we can do a lot of thing with, like opening sockets and send MIDI or VST parameters, even running vocoder patches, etc ... In other words, no need for jackd, no need for maxmsp in Ableton Live... Would jackd work with more than two in/out channels on windows? Colet Patrice - Mail original - De: Thomas Mayer tho...@residuum.org À: pd-list@iem.at Envoyé: Dimanche 27 Janvier 2013 16:59:55 Objet: Re: [PD] Jack support on Windows Hello, on Windows only Jackdmp (Jackd2) is available, but the latest version of Pd-extended (0.43.4-extended) does not work with Jackd2, at least on Debian Wheezy. It may be fixed, when this patch is applied (http://sourceforge.net/tracker/?func=detailatid=478072aid=3582739group_id=55736), because Jackd2 has removed jack_client_new () from their interface. I have found another issue with jackd2, because hardware ports are not reported with the register_port callback, at least not with the way I am using it in my own software (a C#/Mono replacement for QJackCTL https://github.com/residuum/MonoMultiJack), but it probably is an issue in my code. Hth, Thomas On 16.01.2013 18:58, Esteban Viveros wrote: Hello list, Excuse the hassle... But I think this very important .. The windows version of pd-extended 0.43 don't have support to Jack.. It would be great can connect my new pd extended release to ableton live to play a little.. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- We left all that stuff out. If there's an error, we have this routine called panic, and when it is called, the machine crashes, and you holler down the hall, 'Hey, reboot it.' (Dennis Ritchie) http://www.residuum.org/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Perhaps... I have a FTP and in linux I only can have 2 outputs with them. With the m-audio drivers I have 4 outputs.. Some time ago I tried to run pdvst without sucess. The matter is only put to run pd-extended 0.43.4 with jackd in windows.. Even as I have MaxForLive working in my windows software set... But years ago I didn't have these softwares... And it would be great pepople with the same problems I was have can be run pd with jackd in windows with some facilities... That can do the people to dispend energy in learn pd and not to try put it to work... 2013/1/27 Patrice Colet colet.patr...@free.fr jackdmp has always worked with pd on windows because it has been using ASIO drivers, but with two channels only... also I'm still using pdvst for playing with Ableton Live on windows, if not in debug mode, it's rather stable, and even if it's a 0.37 pd version, we can do a lot of thing with, like opening sockets and send MIDI or VST parameters, even running vocoder patches, etc ... In other words, no need for jackd, no need for maxmsp in Ableton Live... Would jackd work with more than two in/out channels on windows? Colet Patrice - Mail original - De: Thomas Mayer tho...@residuum.org À: pd-list@iem.at Envoyé: Dimanche 27 Janvier 2013 16:59:55 Objet: Re: [PD] Jack support on Windows Hello, on Windows only Jackdmp (Jackd2) is available, but the latest version of Pd-extended (0.43.4-extended) does not work with Jackd2, at least on Debian Wheezy. It may be fixed, when this patch is applied ( http://sourceforge.net/tracker/?func=detailatid=478072aid=3582739group_id=55736 ), because Jackd2 has removed jack_client_new () from their interface. I have found another issue with jackd2, because hardware ports are not reported with the register_port callback, at least not with the way I am using it in my own software (a C#/Mono replacement for QJackCTL https://github.com/residuum/MonoMultiJack), but it probably is an issue in my code. Hth, Thomas On 16.01.2013 18:58, Esteban Viveros wrote: Hello list, Excuse the hassle... But I think this very important .. The windows version of pd-extended 0.43 don't have support to Jack.. It would be great can connect my new pd extended release to ableton live to play a little.. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- We left all that stuff out. If there's an error, we have this routine called panic, and when it is called, the machine crashes, and you holler down the hall, 'Hey, reboot it.' (Dennis Ritchie) http://www.residuum.org/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
On 01/27/2013 01:49 PM, Patrice Colet wrote: De: Esteban Viveros emvive...@gmail.com Some time ago I tried to run pdvst without sucess. ah if you put the vststuff.dll into vstplugin directory, and the pdvst folder that contains vststuff.pd patches vststuff.pdv files along with the vst host executable (it should be 'Program' folder for Ableton Live) it should be ok. I've started some time ago to give a try into recompiling pdvst with a recent pd version, but no success yet. It would be nice to have some patches to apply into pd-extended sources for having an actual pdvst version, but if I'm the only one interested into using this, it might not be worth the effort. I've never looked at those patches because I've never really used VSTs. But post them here and I'll look at them. If its possible to include them, I'm up for it. I think I remember that pdvst has a custom scheduler. The best thing then would be to port it to the new pluggable scheduler stuff used by pd~ .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Sorry for delay... I do a video to exemplify the procedure I doing... In this try particulary, pd starts in the first try... On others tries I was needed to try twice to open pd... http://www.youtube.com/watch?v=8ldcUNoTtoY More information just ask! ;) 2013/1/24 Julian Brooks jbee...@gmail.com HI all, hope I'm not barging in... I've had troubles recently with qjackctl on debian wheezy. The simplest solution was, as IOhannes said, have jack running beforehand. I found just running jackd (the server element) was most reliable. Mine looks like this for example (from command line): jackd -T -ndefault -p 128 -v -R -P 90 -v -T -d alsa -n 2 -r 44100 -p 128 -d hw:1,0 -M -H Trial and error is your friend here. Best wishes, Julian On 24 January 2013 07:11, IOhannes zmölnig zmoel...@iem.at wrote: On 01/24/2013 02:09 AM, Esteban Viveros wrote: But.. I have new problems now.. hhehehehe When I start pd, I have: JACK: unable to connect to JACK server JACK: server returned status 17 try starting the JACK-server before running Pd. (Pd is supposed to automatically start jack if it is not runing, but people are reporting problems with that) fgmadr IOhannes __**_ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/** listinfo/pd-list http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Hola Esteban, That's very good progress. I have my account set up as administrator and I have disabled UAC too. Have you tried this? I can try out your built if you want. Cheers Pierre-Olivier On 25/01/2013 09:47, Esteban Viveros wrote: Sorry for delay... I do a video to exemplify the procedure I doing... In this try particulary, pd starts in the first try... On others tries I was needed to try twice to open pd... http://www.youtube.com/watch?v=8ldcUNoTtoY More information just ask! ;) 2013/1/24 Julian Brooks jbee...@gmail.com mailto:jbee...@gmail.com HI all, hope I'm not barging in... I've had troubles recently with qjackctl on debian wheezy. The simplest solution was, as IOhannes said, have jack running beforehand. I found just running jackd (the server element) was most reliable. Mine looks like this for example (from command line): jackd -T -ndefault -p 128 -v -R -P 90 -v -T -d alsa -n 2 -r 44100 -p 128 -d hw:1,0 -M -H Trial and error is your friend here. Best wishes, Julian On 24 January 2013 07:11, IOhannes zmölnig zmoel...@iem.at mailto:zmoel...@iem.at wrote: On 01/24/2013 02:09 AM, Esteban Viveros wrote: But.. I have new problems now.. hhehehehe When I start pd, I have: JACK: unable to connect to JACK server JACK: server returned status 17 try starting the JACK-server before running Pd. (Pd is supposed to automatically start jack if it is not runing, but people are reporting problems with that) fgmadr IOhannes ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Yep! Pierre you're right! I change UAC settings and now I can use all set.. Jack (without administrator privileges), Pd (without administrator) and Ableton Live (administrator mode). I don't do a hard test but sound is working like a video test... The unique problem is my computer with windows 7 are completly unsafe with that UAC settings, but that put to work this 3 apps together. The build are in https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit I think that can work in windows 7 x64, I use to built that Mixed 64/32 bit Jack 1.9.9 disponible here: http://jackaudio.org/download I don't have certainty if that build can be shared in that way, but we can try! ;) 2013/1/25 Pierre-Olivier Boulant po.boul...@free.fr Hola Esteban, That's very good progress. I have my account set up as administrator and I have disabled UAC too. Have you tried this? I can try out your built if you want. Cheers Pierre-Olivier On 25/01/2013 09:47, Esteban Viveros wrote: Sorry for delay... I do a video to exemplify the procedure I doing... In this try particulary, pd starts in the first try... On others tries I was needed to try twice to open pd... http://www.youtube.com/watch?v=8ldcUNoTtoY More information just ask! ;) 2013/1/24 Julian Brooks jbee...@gmail.com HI all, hope I'm not barging in... I've had troubles recently with qjackctl on debian wheezy. The simplest solution was, as IOhannes said, have jack running beforehand. I found just running jackd (the server element) was most reliable. Mine looks like this for example (from command line): jackd -T -ndefault -p 128 -v -R -P 90 -v -T -d alsa -n 2 -r 44100 -p 128 -d hw:1,0 -M -H Trial and error is your friend here. Best wishes, Julian On 24 January 2013 07:11, IOhannes zmölnig zmoel...@iem.at wrote: On 01/24/2013 02:09 AM, Esteban Viveros wrote: But.. I have new problems now.. hhehehehe When I start pd, I have: JACK: unable to connect to JACK server JACK: server returned status 17 try starting the JACK-server before running Pd. (Pd is supposed to automatically start jack if it is not runing, but people are reporting problems with that) fgmadr IOhannes -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Hi, I wouldn't be too worried about turning off UAC and being admin on a Windows machine. Mine are setup like this and nothing has ever happened because of that. Most linux users would say Windows is unsafe anyway. ;) I'm testing your build. This is excellent! Thank you for taking the time to make this happen. Cheers pob On 25/01/2013 14:35, Esteban Viveros wrote: Yep! Pierre you're right! I change UAC settings and now I can use all set.. Jack (without administrator privileges), Pd (without administrator) and Ableton Live (administrator mode). I don't do a hard test but sound is working like a video test... The unique problem is my computer with windows 7 are completly unsafe with that UAC settings, but that put to work this 3 apps together. The build are in https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit I think that can work in windows 7 x64, I use to built that Mixed 64/32 bit Jack 1.9.9 disponible here: http://jackaudio.org/download I don't have certainty if that build can be shared in that way, but we can try! ;) 2013/1/25 Pierre-Olivier Boulant po.boul...@free.fr mailto:po.boul...@free.fr Hola Esteban, That's very good progress. I have my account set up as administrator and I have disabled UAC too. Have you tried this? I can try out your built if you want. Cheers Pierre-Olivier On 25/01/2013 09:47, Esteban Viveros wrote: Sorry for delay... I do a video to exemplify the procedure I doing... In this try particulary, pd starts in the first try... On others tries I was needed to try twice to open pd... http://www.youtube.com/watch?v=8ldcUNoTtoY More information just ask! ;) 2013/1/24 Julian Brooks jbee...@gmail.com mailto:jbee...@gmail.com HI all, hope I'm not barging in... I've had troubles recently with qjackctl on debian wheezy. The simplest solution was, as IOhannes said, have jack running beforehand. I found just running jackd (the server element) was most reliable. Mine looks like this for example (from command line): jackd -T -ndefault -p 128 -v -R -P 90 -v -T -d alsa -n 2 -r 44100 -p 128 -d hw:1,0 -M -H Trial and error is your friend here. Best wishes, Julian On 24 January 2013 07:11, IOhannes zmölnig zmoel...@iem.at mailto:zmoel...@iem.at wrote: On 01/24/2013 02:09 AM, Esteban Viveros wrote: But.. I have new problems now.. hhehehehe When I start pd, I have: JACK: unable to connect to JACK server JACK: server returned status 17 try starting the JACK-server before running Pd. (Pd is supposed to automatically start jack if it is not runing, but people are reporting problems with that) fgmadr IOhannes ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
This one missed the list. well deserved gratefulness inside ;) On 25/01/2013 15:43, Esteban Viveros wrote: HAhahahaha... Windows unsafe.. Yeah! You're right again! Many many thanks to HC!! Turning off my humbleness I can say.. I'm your Top fan! :) Best Regards! 2013/1/25 Pierre-Olivier Boulant po.boul...@free.fr mailto:po.boul...@free.fr Hi, I wouldn't be too worried about turning off UAC and being admin on a Windows machine. Mine are setup like this and nothing has ever happened because of that. Most linux users would say Windows is unsafe anyway. ;) I'm testing your build. This is excellent! Thank you for taking the time to make this happen. Cheers pob On 25/01/2013 14:35, Esteban Viveros wrote: Yep! Pierre you're right! I change UAC settings and now I can use all set.. Jack (without administrator privileges), Pd (without administrator) and Ableton Live (administrator mode). I don't do a hard test but sound is working like a video test... The unique problem is my computer with windows 7 are completly unsafe with that UAC settings, but that put to work this 3 apps together. The build are in https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit I think that can work in windows 7 x64, I use to built that Mixed 64/32 bit Jack 1.9.9 disponible here: http://jackaudio.org/download I don't have certainty if that build can be shared in that way, but we can try! ;) 2013/1/25 Pierre-Olivier Boulant po.boul...@free.fr mailto:po.boul...@free.fr Hola Esteban, That's very good progress. I have my account set up as administrator and I have disabled UAC too. Have you tried this? I can try out your built if you want. Cheers Pierre-Olivier On 25/01/2013 09:47, Esteban Viveros wrote: Sorry for delay... I do a video to exemplify the procedure I doing... In this try particulary, pd starts in the first try... On others tries I was needed to try twice to open pd... http://www.youtube.com/watch?v=8ldcUNoTtoY More information just ask! ;) 2013/1/24 Julian Brooks jbee...@gmail.com mailto:jbee...@gmail.com HI all, hope I'm not barging in... I've had troubles recently with qjackctl on debian wheezy. The simplest solution was, as IOhannes said, have jack running beforehand. I found just running jackd (the server element) was most reliable. Mine looks like this for example (from command line): jackd -T -ndefault -p 128 -v -R -P 90 -v -T -d alsa -n 2 -r 44100 -p 128 -d hw:1,0 -M -H Trial and error is your friend here. Best wishes, Julian On 24 January 2013 07:11, IOhannes zmölnig zmoel...@iem.at mailto:zmoel...@iem.at wrote: On 01/24/2013 02:09 AM, Esteban Viveros wrote: But.. I have new problems now.. hhehehehe When I start pd, I have: JACK: unable to connect to JACK server JACK: server returned status 17 try starting the JACK-server before running Pd. (Pd is supposed to automatically start jack if it is not runing, but people are reporting problems with that) fgmadr IOhannes ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Its great that you got this working! Once I get the 0.44 builds going, hopefully soon, I'll include this there so that the nightly builds will include Jack support on Windows. Sorry I can't help out with the current issues, I just really don't know enough about Jack or Windows. .hc On Jan 25, 2013, at 10:04 AM, Pierre-Olivier Boulant wrote: This one missed the list. well deserved gratefulness inside ;) On 25/01/2013 15:43, Esteban Viveros wrote: HAhahahaha... Windows unsafe.. Yeah! You're right again! Many many thanks to HC!! Turning off my humbleness I can say.. I'm your Top fan! :) Best Regards! 2013/1/25 Pierre-Olivier Boulant po.boul...@free.fr Hi, I wouldn't be too worried about turning off UAC and being admin on a Windows machine. Mine are setup like this and nothing has ever happened because of that. Most linux users would say Windows is unsafe anyway. ;) I'm testing your build. This is excellent! Thank you for taking the time to make this happen. Cheers pob On 25/01/2013 14:35, Esteban Viveros wrote: Yep! Pierre you're right! I change UAC settings and now I can use all set.. Jack (without administrator privileges), Pd (without administrator) and Ableton Live (administrator mode). I don't do a hard test but sound is working like a video test... The unique problem is my computer with windows 7 are completly unsafe with that UAC settings, but that put to work this 3 apps together. The build are in https://docs.google.com/file/d/0B6TScIMkPOGJSHdwZzJVM19CQ00/edit I think that can work in windows 7 x64, I use to built that Mixed 64/32 bit Jack 1.9.9 disponible here: http://jackaudio.org/download I don't have certainty if that build can be shared in that way, but we can try! ;) 2013/1/25 Pierre-Olivier Boulant po.boul...@free.fr Hola Esteban, That's very good progress. I have my account set up as administrator and I have disabled UAC too. Have you tried this? I can try out your built if you want. Cheers Pierre-Olivier On 25/01/2013 09:47, Esteban Viveros wrote: Sorry for delay... I do a video to exemplify the procedure I doing... In this try particulary, pd starts in the first try... On others tries I was needed to try twice to open pd... http://www.youtube.com/watch?v=8ldcUNoTtoY More information just ask! ;) 2013/1/24 Julian Brooks jbee...@gmail.com HI all, hope I'm not barging in... I've had troubles recently with qjackctl on debian wheezy. The simplest solution was, as IOhannes said, have jack running beforehand. I found just running jackd (the server element) was most reliable. Mine looks like this for example (from command line): jackd -T -ndefault -p 128 -v -R -P 90 -v -T -d alsa -n 2 -r 44100 -p 128 -d hw:1,0 -M -H Trial and error is your friend here. Best wishes, Julian On 24 January 2013 07:11, IOhannes zmölnig zmoel...@iem.at wrote: On 01/24/2013 02:09 AM, Esteban Viveros wrote: But.. I have new problems now.. hhehehehe When I start pd, I have: JACK: unable to connect to JACK server JACK: server returned status 17 try starting the JACK-server before running Pd. (Pd is supposed to automatically start jack if it is not runing, but people are reporting problems with that) fgmadr IOhannes ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
HI all, hope I'm not barging in... I've had troubles recently with qjackctl on debian wheezy. The simplest solution was, as IOhannes said, have jack running beforehand. I found just running jackd (the server element) was most reliable. Mine looks like this for example (from command line): jackd -T -ndefault -p 128 -v -R -P 90 -v -T -d alsa -n 2 -r 44100 -p 128 -d hw:1,0 -M -H Trial and error is your friend here. Best wishes, Julian On 24 January 2013 07:11, IOhannes zmölnig zmoel...@iem.at wrote: On 01/24/2013 02:09 AM, Esteban Viveros wrote: But.. I have new problems now.. hhehehehe When I start pd, I have: JACK: unable to connect to JACK server JACK: server returned status 17 try starting the JACK-server before running Pd. (Pd is supposed to automatically start jack if it is not runing, but people are reporting problems with that) fgmadr IOhannes __**_ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/** listinfo/pd-list http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Thanks hc!! Now I have the jack option on pd.. But.. I have new problems now.. hhehehehe When I start pd, I have: JACK: unable to connect to JACK server JACK: server returned status 17 If I try to edit audio settings, pd have a half freeze.. I can change some options but nothing happend and I can't close pd windows.. I tried to pd in administrator mode I can see pd_extended_0 in jack, but pd are half freezed too.. I tried to load a patch, but it still loading ad infinitum... 2013/1/23 Hans-Christoph Steiner h...@at.or.at Ok, this built for me, I hope it works for you too. There is attached a new makefile.mingw and another file, s_audio_jack.c. Copy that to ~/pure-data/pd/src/ on top of the file that is already there. .hc On 01/22/2013 05:58 PM, Esteban Viveros wrote: Hum.. Not yet.. I copied the last makefile.mingw, did the clean, try make and I have error 1.. See attached file 2013/1/22 Hans-Christoph Steiner h...@at.or.at On 01/22/2013 06:24 AM, IOhannes m zmoelnig wrote: On 2013-01-22 12:21, Esteban Viveros wrote: Ok.. I will do that... But why until te make clean, yesterday, ir run the compilation? good point. my hint was merely an assumption what might be causing troubles. in this case: are you sure you are using the correct makefile.mingw again? I added -I$(PROGRAMFILES)/Jack/include and removed -I/c/Progra~1/Jack/include, that's probably the issue. Attached is a messy one again that hopefully works easily. .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Congratulations! You're the first to run Pd with Jack on Windows. Now the tricky parts of actually getting it working. I barely use Jack, so I don't really know what the issue here is. I don't know exactly what administrator mode is, can you explain more or give an example? As far as I know, Pd does not need special permissions to use Jack, but I could be wrong. .hc On 01/23/2013 08:33 PM, Esteban Viveros wrote: Ok... Windows things... I restarted twice and pd can work with jack without administrator mode... The problem is... Ableton Live ever start in administrator mode... And I can't connect it in jack without administrator mode.. For this thinks I need to connect pd to jack in administrator mode... Pd in administrator mode are very bugged, sometimes it open the patch without some libraries ( envgen object don't working) sometimes when I try to open some patch it closes.. 2013/1/23 Esteban Viveros emvive...@gmail.com Thanks hc!! Now I have the jack option on pd.. But.. I have new problems now.. hhehehehe When I start pd, I have: JACK: unable to connect to JACK server JACK: server returned status 17 If I try to edit audio settings, pd have a half freeze.. I can change some options but nothing happend and I can't close pd windows.. I tried to pd in administrator mode I can see pd_extended_0 in jack, but pd are half freezed too.. I tried to load a patch, but it still loading ad infinitum... 2013/1/23 Hans-Christoph Steiner h...@at.or.at Ok, this built for me, I hope it works for you too. There is attached a new makefile.mingw and another file, s_audio_jack.c. Copy that to ~/pure-data/pd/src/ on top of the file that is already there. .hc On 01/22/2013 05:58 PM, Esteban Viveros wrote: Hum.. Not yet.. I copied the last makefile.mingw, did the clean, try make and I have error 1.. See attached file 2013/1/22 Hans-Christoph Steiner h...@at.or.at On 01/22/2013 06:24 AM, IOhannes m zmoelnig wrote: On 2013-01-22 12:21, Esteban Viveros wrote: Ok.. I will do that... But why until te make clean, yesterday, ir run the compilation? good point. my hint was merely an assumption what might be causing troubles. in this case: are you sure you are using the correct makefile.mingw again? I added -I$(PROGRAMFILES)/Jack/include and removed -I/c/Progra~1/Jack/include, that's probably the issue. Attached is a messy one again that hopefully works easily. .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
On 01/24/2013 02:09 AM, Esteban Viveros wrote: But.. I have new problems now.. hhehehehe When I start pd, I have: JACK: unable to connect to JACK server JACK: server returned status 17 try starting the JACK-server before running Pd. (Pd is supposed to automatically start jack if it is not runing, but people are reporting problems with that) fgmadr IOhannes ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Now I can't conclude the compilation... I did: cd ~/pure-data/pd/src make -f makefile.mingw clean make -f makefile.mingw Something in jack.h ... I have this file in C:/Program Files (x86)/Jack/includes/jack What can I do? 2013/1/22 Hans-Christoph Steiner h...@at.or.at Ah, I think I know the issue, try rebulding it, there were a couple of changes in the latest makefile.mingw that didn't take effect: cd ~/pure-data/src make -f makefile.mingw clean make -f makefile.mingw make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install Then the one you want is in: ~/pure-data/Pd-0.43.4-extended-20130117/bin You can't run it directly in ~/pure-data/pd/src because it is missing all of the Tcl files that are in ~/pure-data/Pd-0.43.4-extended-20130117/bin .hc On 01/21/2013 09:19 PM, Esteban Viveros wrote: Yes... Pd-0.43.4-extended-20130117 .. Nut I need to run the pd.exe in ~/pure-data/pd/src or ~/pure-data/Pd-0.43.4-extended-20130117/bin ?? ~/pure-data/Pd-0.43.4-extended-20130117/bin/pd.exe are running.. But I don't have jackrouter option... ~/pure-data/pd/src/pd.exe nothing happens 2013/1/22 Hans-Christoph Steiner h...@at.or.at You can look at the date on the pd.exe in ~/pure-data/Pd-0.43.4-extended-20130117/bin and see if its your new one. And make sure this is all on the same line: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install .hc On 01/21/2013 09:11 PM, Esteban Viveros wrote: Yeah.. I'm trying that but nothind happend.. Maybe the pd-extended installed in system...?? 2013/1/22 Hans-Christoph Steiner h...@at.or.at * download the zip version: http://autobuild.puredata.info/auto-build/2013-01-17/Pd-0.43.4-extended-20130117-windowsxp-i386.zip * unzip it into ~/pure-data * in ~/pure-data/pd/src, run: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install (make sure the last line is all on one line) Now you should be able to go to ~/pure-data/Pd-0.43.4-extended-20130117/bin and run pd.exe and have a working Pd with jack (fingers crossed) .hc On 01/21/2013 09:05 PM, Esteban Viveros wrote: Ok.. It's done! How to play? 2013/1/21 Hans-Christoph Steiner h...@at.or.at Getting closer... try the newly attached makefile. .hc On 01/21/2013 07:25 PM, Esteban Viveros wrote: 2013/1/21 Hans-Christoph Steiner h...@at.or.at once you get the asiosdk2.2.zip, then unzip it into ~/pure-data/pd/asio so that there is a folder called ASIOSDK2 like this: ~/pure-data/pd/asio/ASIOSDK2 Ok! It's done. New log file -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ make.log Description: Binary data ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 2013-01-22 11:57, Esteban Viveros wrote: Now I can't conclude the compilation... I did: cd ~/pure-data/pd/src make -f makefile.mingw clean make -f makefile.mingw Something in jack.h ... I have this file in C:/Program Files (x86)/Jack/includes/jack What can I do? install it to a location that does not have spaces in it. (but then you would need to adjust the makefile.mingw to reflext those new paths) make is well-known for having problems with spaces in paths. fgamsdr IOhannes -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAlD+cksACgkQkX2Xpv6ydvTbUQCeJJSpW3oI4vYULVF7N3eLOGLr 6CsAoIRew5wj/87etDhGrj3k8dfN4JqN =fEsm -END PGP SIGNATURE- ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 2013-01-22 12:04, IOhannes m zmoelnig wrote: On 2013-01-22 11:57, Esteban Viveros wrote: Now I can't conclude the compilation... I did: cd ~/pure-data/pd/src make -f makefile.mingw clean make -f makefile.mingw Something in jack.h ... I have this file in C:/Program Files (x86)/Jack/includes/jack What can I do? install it to a location it being the jack library and headers. fgasdr IOhannes -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAlD+dFcACgkQkX2Xpv6ydvTDgACg2hBv0FmCw+m1fdNEHQ4oxzzl c7cAoMGciY+f1AumMMWBrTYO+OWx/VEx =JWiw -END PGP SIGNATURE- ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 2013-01-22 12:21, Esteban Viveros wrote: Ok.. I will do that... But why until te make clean, yesterday, ir run the compilation? good point. my hint was merely an assumption what might be causing troubles. in this case: are you sure you are using the correct makefile.mingw again? fgmadr IOhannes -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAlD+dswACgkQkX2Xpv6ydvTrfgCg0lW2VRBQPWuFBMGwA+92T0VJ Ts8An15zUwGyHBhbWfLIM0tf2m+3pmwu =PV3t -END PGP SIGNATURE- ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Now I can do the compilation, but I have the same results of yesterday... Issues: - Running make -f makefile.mingw clean I can't complete the compilation, se attached log file. - To do the compilation I needed to do make -f makefile.mingw with the 3 last versions of makefile.mingw, first 17 jan version, after 20 jan version and at last the 21jan version. All without make clean.. Remembering after make -f makefile.mingw I ran: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= I have the message: make: Nothing to be done for `all'. Trying to open pd.exe in ~/pure-data/Pd-0.43.4-extended-20130117/bin I don't have jackrouter option like in ableton live for example... Then I see I'm forgot one install command and I ran that and I have: install: missing file operand Try `install --help' for more information. 2013/1/22 IOhannes m zmoelnig zmoel...@iem.at -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 2013-01-22 12:21, Esteban Viveros wrote: Ok.. I will do that... But why until te make clean, yesterday, ir run the compilation? good point. my hint was merely an assumption what might be causing troubles. in this case: are you sure you are using the correct makefile.mingw again? fgmadr IOhannes -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.12 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAlD+dswACgkQkX2Xpv6ydvTrfgCg0lW2VRBQPWuFBMGwA+92T0VJ Ts8An15zUwGyHBhbWfLIM0tf2m+3pmwu =PV3t -END PGP SIGNATURE- -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ make.log Description: Binary data ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
-BEGIN PGP SIGNED MESSAGE- Hash: SHA256 On 01/22/2013 07:10 AM, Esteban Viveros wrote: Now I can do the compilation, but I have the same results of yesterday... Issues: - Running make -f makefile.mingw clean I can't complete the compilation, se attached log file. - To do the compilation I needed to do make -f makefile.mingw with the 3 last versions of makefile.mingw, first 17 jan version, after 20 jan version and at last the 21jan version. All without make clean.. Remembering after make -f makefile.mingw I ran: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= I have the message: make: Nothing to be done for `all'. Trying to open pd.exe in ~/pure-data/Pd-0.43.4-extended-20130117/bin I don't have jackrouter option like in ableton live for example... Then I see I'm forgot one install command and I ran that and I have: install: missing file operand Try `install --help' for more information. The 'install' needs to be at the end of the line. All of this stuff below needs to be on one single line so its one command, with 'install' being the last thing on the line make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install .hc 2013/1/22 IOhannes m zmoelnig zmoel...@iem.at On 2013-01-22 12:21, Esteban Viveros wrote: Ok.. I will do that... But why until te make clean, yesterday, ir run the compilation? good point. my hint was merely an assumption what might be causing troubles. in this case: are you sure you are using the correct makefile.mingw again? fgmadr IOhannes ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) Comment: GPGTools - http://gpgtools.org Comment: Using GnuPG with undefined - http://www.enigmail.net/ iQIcBAEBCAAGBQJQ/q9XAAoJEJ8P5Yc3S76BDEgP/ifRA5WKGdAinxd+N02qT0El rix8c5ZHFTYTenHXGGMlE3YY4muXW7al+/ZQoKrwwCCXpSvcqkPLJChiV48uFZS8 8VKcR7BEf9A47cD5ix18BU4vBqxpfRA8qD/GU37zqjg/lvIDWYz26GcHuvJ6wWRu Z14A+IOxcJk6TmXAwMEdlsq7SqFOPWjCG+lBIQmBftp+cM2OzYjvTh8OVB+spuvv 5SaLHqVl9Gd1NVKK/mKMzYFtL4nv85jNIa6qvs6XUUscF91JabJFSFPYSkaOWfFA oTvqHnSwn2l95+KnWq8sVJM2ZIYSIt8IdlaGW6JUZAJdHoiF0/qXGqjAiL0UdKSp TdInIMPQt2iy2EU/U3ZiDjeHwfC6xV7nbLupchWdHfkn1aAFAeFgDp/rmJmxl9u+ +R072o4oUxxOsSHBdxjYmE6hkC4gjf6IqCKVSWg8C8lYqaOsiwWoAzZL+zYq/ILv ws9Rpq9B4PXRHFUkdvMy1EdfitkbBIFLP2egeW1f9kUqrN7X82yhjRzejboHrdd3 L//r7pSMIRRgmLp4XzH5cFmb4zBUUiPVvtZq8LYLNz81Vyvt+NHcT/od3Vdiad+w WEmucuXapyMpIdC+s8Xcs/zJNRqjeTNqLp9OloMKnZWdNHj0plfBocMLYUDEVGb9 OtZhQUopNxfTO3FjmURu =f3aM -END PGP SIGNATURE- ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
On 01/22/2013 06:24 AM, IOhannes m zmoelnig wrote: On 2013-01-22 12:21, Esteban Viveros wrote: Ok.. I will do that... But why until te make clean, yesterday, ir run the compilation? good point. my hint was merely an assumption what might be causing troubles. in this case: are you sure you are using the correct makefile.mingw again? I added -I$(PROGRAMFILES)/Jack/include and removed -I/c/Progra~1/Jack/include, that's probably the issue. Attached is a messy one again that hopefully works easily. .hc # how Miller builds Pd on Windows: # http://lists.puredata.info/pipermail/pd-dev/2004-10/002981.html CC = gcc CXX = g++ cvs_root_dir = ../.. pd_src = $(cvs_root_dir)/pd DLL_DIR = $(pd_src)/src BIN_DIR = ../bin VPATH = $(pd_src)/src prefix = /usr/local/pd exec_prefix = $(prefix) includedir = $(prefix)/include libdir = $(exec_prefix)/lib mandir = $(prefix)/man bindir = $(exec_prefix)/bin GFLAGS = -DINSTALL_PREFIX=\$(prefix)\ # varibles to match packages/Makefile.buildlayout so that they can be easily # overridden when building Pd-extended builds. h...@at.or.at libpddir = $(prefix) pddocdir = $(libpddir)/doc libpdbindir = $(libpddir)/bin PDEXEC = pd.exe PDDLL = pd.dll DLLWRAP= dllwrap MORECFLAGS = -O3 -funroll-loops -fomit-frame-pointer PADIR = $(pd_src)/portaudio ASIODIR = $(pd_src)/asio/ASIOSDK2 ASIOINC = -I$(ASIODIR)/common -I$(ASIODIR)/host -I$(ASIODIR)/host/pc INCPA = -I$(PADIR) -I$(PADIR)/include -I$(PADIR)/src/common -I$(PADIR)/src/os/win $(ASIOINC) INCLUDE = -I$(pd_src)/src -I/c/Progra~1/Jack/includes -I/c/Progra~2/Jack/includes -I/c/Progra~3/Jack/includes GINCLUDE = -I/usr/local/include $(INCLUDE) LDFLAGS = LIBS = -lm -lwsock32 -lwinmm -lole32 -lpthreadGC2 $(PROGRAMFILES)/Jack/lib/libjack.lib OPT_CFLAGS = WARN_CFLAGS = -Wall -W -Wstrict-prototypes -Wno-unused \ -Wno-unused-parameter -Wno-parentheses -Wno-switch # Some old code in asio/ASIOSDK2/common/combase.h needs to be ignored, # we do this by setting the WINVER macro to min Windows XP aka 5.1. # Also, for SetDllDirectory() s_loader.c, we need a minium of Windows # XP SP1. WINVER isnt' fine-grained enough for that, so we use the # next minor version of Windows, 5.2. ARCH_CFLAGS = -DPD -DPD_INTERNAL -DPA_USE_ASIO -DPA_USE_WMME -DWINVER=0x0502 \ -DUSEAPI_MMIO -DUSEAPI_PORTAUDIO -DUSEAPI_JACK -DJACK_XRUN \ -mms-bitfields -DWISHAPP='wish85.exe' CFLAGS += $(ARCH_CFLAGS) $(WARN_CFLAGS) $(OPT_CFLAGS) $(MORECFLAGS) STRIP = strip --strip-unneeded -R .note -R .comment # the sources PASRC = s_audio_pa.c s_audio_paring.c s_audio_jack.c \ s_audio_mmio.c s_midi_mmio.c \ $(PADIR)/src/common/pa_stream.c \ $(PADIR)/src/common/pa_trace.c \ $(PADIR)/src/common/pa_process.c \ $(PADIR)/src/common/pa_front.c \ $(PADIR)/src/common/pa_dither.c \ $(PADIR)/src/common/pa_cpuload.c \ $(PADIR)/src/common/pa_converters.c \ $(PADIR)/src/common/pa_allocation.c \ $(PADIR)/src/common/pa_ringbuffer.c \ $(PADIR)/src/os/win/pa_win_hostapis.c \ $(PADIR)/src/os/win/pa_win_util.c \ $(PADIR)/src/os/win/pa_win_waveformat.c \ $(PADIR)/src/os/win/pa_win_coinitialize.c \ $(PADIR)/src/hostapi/wmme/pa_win_wmme.c ASIOSRC = $(PADIR)/src/hostapi/asio/iasiothiscallresolver.cpp \ $(PADIR)/src/hostapi/asio/pa_asio.cpp \ $(ASIODIR)/common/asio.cpp \ $(ASIODIR)/host/asiodrivers.cpp \ $(ASIODIR)/host/pc/asiolist.cpp #VSRC = s_audio_vst.c PMDIR = ../portmidi PMINCLUDE = -I$(PMDIR)/pm_common -I$(PMDIR)/pm_win -I$(PMDIR)/porttime -DNEWBUFFER PMSRC = $(PMDIR)/pm_common/portmidi.c \ $(PMDIR)/pm_common/pmutil.c \ $(PMDIR)/porttime/porttime.c \ $(PMDIR)/porttime/ptwinmm.c \ $(PMDIR)/pm_win/pmwin.c \ $(PMDIR)/pm_win/pmwinmm.c PMOBJ = $(PMSRC:.c=.o) HEADERS = g_all_guis.h m_imp.h g_canvas.h m_pd.h s_stuff.h g_magicglass.h \ $(wildcard ../portaudio/common/*.h) s_audio_paring.h scandir.h \ ../portaudio/src/os/win/pa_win_coinitialize.h SRC = g_canvas.c g_graph.c g_text.c g_rtext.c g_array.c g_template.c \ g_io.c g_scalar.c g_traversal.c g_guiconnect.c g_readwrite.c g_editor.c \ g_all_guis.c \ m_pd.c m_class.c m_obj.c m_atom.c m_memory.c m_binbuf.c \ m_conf_pdextended.c m_glob.c m_sched.c \ s_main.c s_inter.c s_file.c s_print.c \ s_loader.c s_path.c s_entry.c s_audio.c s_midi.c \ s_utf8.c \ d_ugen.c d_ctl.c d_arithmetic.c d_osc.c d_filter.c \ d_math.c d_array.c d_global.c \ d_delay.c d_resample.c \ x_arithmetic.c x_connective.c \ x_acoustics.c d_soundfile.c \ e_fft.c e_gfxstub.c e_dac.c e_midi.c \ g_magicglass.c \ scandir.c \ import.c path.c print.c closebang.c initbang.c loadbang.c # FFTW #SRC += d_fft_fftw.c d_fftroutine.c # Mayer FFT SRC += d_fft_mayer.c d_fftroutine.c SRSRC = u_pdsend.c u_pdreceive.c OBJ =
Re: [PD] Jack support on Windows
Hum.. Not yet.. I copied the last makefile.mingw, did the clean, try make and I have error 1.. See attached file 2013/1/22 Hans-Christoph Steiner h...@at.or.at On 01/22/2013 06:24 AM, IOhannes m zmoelnig wrote: On 2013-01-22 12:21, Esteban Viveros wrote: Ok.. I will do that... But why until te make clean, yesterday, ir run the compilation? good point. my hint was merely an assumption what might be causing troubles. in this case: are you sure you are using the correct makefile.mingw again? I added -I$(PROGRAMFILES)/Jack/include and removed -I/c/Progra~1/Jack/include, that's probably the issue. Attached is a messy one again that hopefully works easily. .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ make.log Description: Binary data ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Ok, this built for me, I hope it works for you too. There is attached a new makefile.mingw and another file, s_audio_jack.c. Copy that to ~/pure-data/pd/src/ on top of the file that is already there. .hc On 01/22/2013 05:58 PM, Esteban Viveros wrote: Hum.. Not yet.. I copied the last makefile.mingw, did the clean, try make and I have error 1.. See attached file 2013/1/22 Hans-Christoph Steiner h...@at.or.at On 01/22/2013 06:24 AM, IOhannes m zmoelnig wrote: On 2013-01-22 12:21, Esteban Viveros wrote: Ok.. I will do that... But why until te make clean, yesterday, ir run the compilation? good point. my hint was merely an assumption what might be causing troubles. in this case: are you sure you are using the correct makefile.mingw again? I added -I$(PROGRAMFILES)/Jack/include and removed -I/c/Progra~1/Jack/include, that's probably the issue. Attached is a messy one again that hopefully works easily. .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list # how Miller builds Pd on Windows: # http://lists.puredata.info/pipermail/pd-dev/2004-10/002981.html CC = gcc CXX = g++ cvs_root_dir = ../.. pd_src = $(cvs_root_dir)/pd DLL_DIR = $(pd_src)/src BIN_DIR = ../bin VPATH = $(pd_src)/src prefix = /usr/local/pd exec_prefix = $(prefix) includedir = $(prefix)/include libdir = $(exec_prefix)/lib mandir = $(prefix)/man bindir = $(exec_prefix)/bin GFLAGS = -DINSTALL_PREFIX=\$(prefix)\ # varibles to match packages/Makefile.buildlayout so that they can be easily # overridden when building Pd-extended builds. h...@at.or.at libpddir = $(prefix) pddocdir = $(libpddir)/doc libpdbindir = $(libpddir)/bin PDEXEC = pd.exe PDDLL = pd.dll DLLWRAP= dllwrap MORECFLAGS = -O3 -funroll-loops -fomit-frame-pointer PADIR = $(pd_src)/portaudio ASIODIR = $(pd_src)/asio/ASIOSDK2 ASIOINC = -I$(ASIODIR)/common -I$(ASIODIR)/host -I$(ASIODIR)/host/pc INCPA = -I$(PADIR) -I$(PADIR)/include -I$(PADIR)/src/common -I$(PADIR)/src/os/win $(ASIOINC) -I$(PROGRAMFILES)/Jack/includes INCLUDE = -I$(pd_src)/src GINCLUDE = -I/usr/local/include $(INCLUDE) LDFLAGS = LIBS = -lm -lwsock32 -lwinmm -lole32 -lpthreadGC2 -lregex $(PROGRAMFILES)/Jack/lib/libjack.lib OPT_CFLAGS = WARN_CFLAGS = -Wall -W -Wstrict-prototypes -Wno-unused \ -Wno-unused-parameter -Wno-parentheses -Wno-switch # Some old code in asio/ASIOSDK2/common/combase.h needs to be ignored, # we do this by setting the WINVER macro to min Windows XP aka 5.1. # Also, for SetDllDirectory() s_loader.c, we need a minium of Windows # XP SP1. WINVER isnt' fine-grained enough for that, so we use the # next minor version of Windows, 5.2. ARCH_CFLAGS = -DPD -DPD_INTERNAL -DPA_USE_ASIO -DPA_USE_WMME -DWINVER=0x0502 \ -DUSEAPI_MMIO -DUSEAPI_PORTAUDIO -DUSEAPI_JACK -DJACK_XRUN \ -mms-bitfields -DWISHAPP='wish85.exe' CFLAGS += $(ARCH_CFLAGS) $(WARN_CFLAGS) $(OPT_CFLAGS) $(MORECFLAGS) STRIP = strip --strip-unneeded -R .note -R .comment # the sources PASRC = s_audio_pa.c s_audio_paring.c s_audio_jack.c \ s_audio_mmio.c s_midi_mmio.c \ $(PADIR)/src/common/pa_stream.c \ $(PADIR)/src/common/pa_trace.c \ $(PADIR)/src/common/pa_process.c \ $(PADIR)/src/common/pa_front.c \ $(PADIR)/src/common/pa_dither.c \ $(PADIR)/src/common/pa_cpuload.c \ $(PADIR)/src/common/pa_converters.c \ $(PADIR)/src/common/pa_allocation.c \ $(PADIR)/src/common/pa_ringbuffer.c \ $(PADIR)/src/os/win/pa_win_hostapis.c \ $(PADIR)/src/os/win/pa_win_util.c \ $(PADIR)/src/os/win/pa_win_waveformat.c \ $(PADIR)/src/os/win/pa_win_coinitialize.c \ $(PADIR)/src/hostapi/wmme/pa_win_wmme.c ASIOSRC = $(PADIR)/src/hostapi/asio/iasiothiscallresolver.cpp \ $(PADIR)/src/hostapi/asio/pa_asio.cpp \ $(ASIODIR)/common/asio.cpp \ $(ASIODIR)/host/asiodrivers.cpp \ $(ASIODIR)/host/pc/asiolist.cpp #VSRC = s_audio_vst.c PMDIR = ../portmidi PMINCLUDE = -I$(PMDIR)/pm_common -I$(PMDIR)/pm_win -I$(PMDIR)/porttime -DNEWBUFFER PMSRC = $(PMDIR)/pm_common/portmidi.c \ $(PMDIR)/pm_common/pmutil.c \ $(PMDIR)/porttime/porttime.c \ $(PMDIR)/porttime/ptwinmm.c \ $(PMDIR)/pm_win/pmwin.c \ $(PMDIR)/pm_win/pmwinmm.c PMOBJ = $(PMSRC:.c=.o) HEADERS = g_all_guis.h m_imp.h g_canvas.h m_pd.h s_stuff.h g_magicglass.h \ $(wildcard ../portaudio/common/*.h) s_audio_paring.h scandir.h \ ../portaudio/src/os/win/pa_win_coinitialize.h SRC = g_canvas.c g_graph.c g_text.c g_rtext.c g_array.c g_template.c \ g_io.c g_scalar.c g_traversal.c g_guiconnect.c g_readwrite.c g_editor.c \ g_all_guis.c \ m_pd.c m_class.c m_obj.c m_atom.c m_memory.c m_binbuf.c \ m_conf_pdextended.c m_glob.c m_sched.c \ s_main.c s_inter.c s_file.c
Re: [PD] Jack support on Windows
Well.. I have here only MinGW shell and Uninstall mingw-get on MinGW menu.. 2013/1/20 Hans-Christoph Steiner h...@at.or.at Ok, that's much better! Try the attached makefile.mingw. The problem is actually here: /bin/sh: -c: line 0: syntax error near unexpected token `(' /bin/sh: -c: line 0: `gcc -I../../pd/src -IC:\Program Files (x86)/Jack/includes -I/c/Progra~1/jack/includes -I/c/Progra~2/jack/includes -I/c/Progra~3/jack/includes Also, it looks like you're using cmd.exe, like I think patco said. You should use the MinGW Shell, it is sometimes called MSYS. You can find it in your Program Files menu under MinGW. Building Pd-extended might work under cmd.exe, but I've never tried. I always use the MinGW MSYS shell. .hc On 01/20/2013 07:56 AM, Esteban Viveros wrote: Finally! That's the result of my attempting compilation C:\MinGW\msys\1.0\home\Esteban\pure-data\pd\srcmake -f makefile.mingw makefile.mingw:300: makefile.dependencies: No such file or directory gcc -I../../pd/src -IC:\Program Files (x86)/Jack/includes -I/c/Progra~1/jack/inc ludes -I/c/Progra~2/jack/includes -I/c/Progra~3/jack/includes -I../../pd/portaud io -I../../pd/portaudio/include -I../../pd/portaudio/src/common -I../../pd/porta udio/src/os/win -I../../pd/asio/ASIOSDK2/common -I../../pd/asio/ASIOSDK2/host -I ../../pd/asio/ASIOSDK2/host/pc -DPD -DPD_INTERNAL -DPA_USE_ASIO -DPA_USE_WMME -D WINVER=0x0502 -DUSEAPI_MMIO -DUSEAPI_PORTAUDIO -mms-bitfields -DWISHAPP='wish8 5.exe' -Wall -W -Wstrict-prototypes -Wno-unused -Wno-unused-parameter -Wno-par entheses -Wno-switch -O3 -funroll-loops -fomit-frame-pointer -M g_canvas.c g_g raph.c g_text.c g_rtext.c g_array.c g_template.c g_io.c g_scalar.c g_traversal. c g_guiconnect.c g_readwrite.c g_editor.c g_all_guis.c m_pd.c m_class.c m_obj. c m_atom.c m_memory.c m_binbuf.c m_conf_pdextended.c m_glob.c m_sched.c s_main .c s_inter.c s_file.c s_print.c s_loader.c s_path.c s_entry.c s_audio.c s_midi. c s_utf8.c d_ugen.c d_ctl.c d_arithmetic.c d_osc.c d_filter.c d_math.c d_arra y.c d_global.c d_delay.c d_resample.c x_arithmetic.c x_connective.c x_acousti cs.c d_soundfile.c e_fft.c e_gfxstub.c e_dac.c e_midi.c g_magicglass.c scandi r.c import.c path.c print.c closebang.c initbang.c loadbang.c d_fft_mayer.c d_f ftroutine.c s_audio_pa.c s_audio_paring.c s_audio_jack.c s_audio_mmio.c s_midi_ mmio.c ../../pd/portaudio/src/common/pa_stream.c ../../pd/portaudio/src/common /pa_trace.c ../../pd/portaudio/src/common/pa_process.c ../../pd/portaudio/src/ common/pa_front.c ../../pd/portaudio/src/common/pa_dither.c ../../pd/portaudio /src/common/pa_cpuload.c ../../pd/portaudio/src/common/pa_converters.c ../../p d/portaudio/src/common/pa_allocation.c ../../pd/portaudio/src/common/pa_ringbuf fer.c ../../pd/portaudio/src/os/win/pa_win_hostapis.c ../../pd/portaudio/src/o s/win/pa_win_util.c ../../pd/portaudio/src/os/win/pa_win_waveformat.c ../../pd /portaudio/src/os/win/pa_win_coinitialize.c ../../pd/portaudio/src/hostapi/wmme /pa_win_wmme.c g_all_guis.h m_imp.h g_canvas.h m_pd.h s_stuff.h g_magicglass.h s_audio_paring.h scandir.h ../portaudio/src/os/win/pa_win_coinitialize.h \ makefile.dependencies /bin/sh: -c: line 0: syntax error near unexpected token `(' /bin/sh: -c: line 0: `gcc -I../../pd/src -IC:\Program Files (x86)/Jack/includes -I/c/Progra~1/jack/includes -I/c/Progra~2/jack/includes -I/c/Progra~3/jack/inclu des -I../../pd/portaudio -I../../pd/portaudio/include -I../../pd/portaudio/src/c ommon -I../../pd/portaudio/src/os/win -I../../pd/asio/ASIOSDK2/common -I../../pd /asio/ASIOSDK2/host -I../../pd/asio/ASIOSDK2/host/pc -DPD -DPD_INTERNAL -DPA_USE _ASIO -DPA_USE_WMME -DWINVER=0x0502 -DUSEAPI_MMIO -DUSEAPI_PORTAUDIO -mms-bitfi elds -DWISHAPP='wish85.exe' -Wall -W -Wstrict-prototypes -Wno-unused -Wno-unu sed-parameter -Wno-parentheses -Wno-switch -O3 -funroll-loops -fomit-frame-poin ter -M g_canvas.c g_graph.c g_text.c g_rtext.c g_array.c g_template.c g_io.c g _scalar.c g_traversal.c g_guiconnect.c g_readwrite.c g_editor.c g_all_guis.c m _pd.c m_class.c m_obj.c m_atom.c m_memory.c m_binbuf.c m_conf_pdextended.c m_gl ob.c m_sched.c s_main.c s_inter.c s_file.c s_print.c s_loader.c s_path.c s_ent ry.c s_audio.c s_midi.c s_utf8.c d_ugen.c d_ctl.c d_arithmetic.c d_osc.c d_fil ter.c d_math.c d_array.c d_global.c d_delay.c d_resample.c x_arithmetic.c x_c onnective.c x_acoustics.c d_soundfile.c e_fft.c e_gfxstub.c e_dac.c e_midi.c g_magicglass.c scandir.c import.c path.c print.c closebang.c initbang.c loadba ng.c d_fft_mayer.c d_fftroutine.c s_audio_pa.c s_audio_paring.c s_audio_jack.c s_audio_mmio.c s_midi_mmio.c ../../pd/portaudio/src/common/pa_stream.c ../../p d/portaudio/src/common/pa_trace.c ../../pd/portaudio/src/common/pa_process.c
Re: [PD] Jack support on Windows
MinGW Shell is what you want. They used to call that the MSYS shell. .hc On 01/21/2013 06:14 PM, Esteban Viveros wrote: Well.. I have here only MinGW shell and Uninstall mingw-get on MinGW menu.. 2013/1/20 Hans-Christoph Steiner h...@at.or.at Ok, that's much better! Try the attached makefile.mingw. The problem is actually here: /bin/sh: -c: line 0: syntax error near unexpected token `(' /bin/sh: -c: line 0: `gcc -I../../pd/src -IC:\Program Files (x86)/Jack/includes -I/c/Progra~1/jack/includes -I/c/Progra~2/jack/includes -I/c/Progra~3/jack/includes Also, it looks like you're using cmd.exe, like I think patco said. You should use the MinGW Shell, it is sometimes called MSYS. You can find it in your Program Files menu under MinGW. Building Pd-extended might work under cmd.exe, but I've never tried. I always use the MinGW MSYS shell. .hc On 01/20/2013 07:56 AM, Esteban Viveros wrote: Finally! That's the result of my attempting compilation C:\MinGW\msys\1.0\home\Esteban\pure-data\pd\srcmake -f makefile.mingw makefile.mingw:300: makefile.dependencies: No such file or directory gcc -I../../pd/src -IC:\Program Files (x86)/Jack/includes -I/c/Progra~1/jack/inc ludes -I/c/Progra~2/jack/includes -I/c/Progra~3/jack/includes -I../../pd/portaud io -I../../pd/portaudio/include -I../../pd/portaudio/src/common -I../../pd/porta udio/src/os/win -I../../pd/asio/ASIOSDK2/common -I../../pd/asio/ASIOSDK2/host -I ../../pd/asio/ASIOSDK2/host/pc -DPD -DPD_INTERNAL -DPA_USE_ASIO -DPA_USE_WMME -D WINVER=0x0502 -DUSEAPI_MMIO -DUSEAPI_PORTAUDIO -mms-bitfields -DWISHAPP='wish8 5.exe' -Wall -W -Wstrict-prototypes -Wno-unused -Wno-unused-parameter -Wno-par entheses -Wno-switch -O3 -funroll-loops -fomit-frame-pointer -M g_canvas.c g_g raph.c g_text.c g_rtext.c g_array.c g_template.c g_io.c g_scalar.c g_traversal. c g_guiconnect.c g_readwrite.c g_editor.c g_all_guis.c m_pd.c m_class.c m_obj. c m_atom.c m_memory.c m_binbuf.c m_conf_pdextended.c m_glob.c m_sched.c s_main .c s_inter.c s_file.c s_print.c s_loader.c s_path.c s_entry.c s_audio.c s_midi. c s_utf8.c d_ugen.c d_ctl.c d_arithmetic.c d_osc.c d_filter.c d_math.c d_arra y.c d_global.c d_delay.c d_resample.c x_arithmetic.c x_connective.c x_acousti cs.c d_soundfile.c e_fft.c e_gfxstub.c e_dac.c e_midi.c g_magicglass.c scandi r.c import.c path.c print.c closebang.c initbang.c loadbang.c d_fft_mayer.c d_f ftroutine.c s_audio_pa.c s_audio_paring.c s_audio_jack.c s_audio_mmio.c s_midi_ mmio.c ../../pd/portaudio/src/common/pa_stream.c ../../pd/portaudio/src/common /pa_trace.c ../../pd/portaudio/src/common/pa_process.c ../../pd/portaudio/src/ common/pa_front.c ../../pd/portaudio/src/common/pa_dither.c ../../pd/portaudio /src/common/pa_cpuload.c ../../pd/portaudio/src/common/pa_converters.c ../../p d/portaudio/src/common/pa_allocation.c ../../pd/portaudio/src/common/pa_ringbuf fer.c ../../pd/portaudio/src/os/win/pa_win_hostapis.c ../../pd/portaudio/src/o s/win/pa_win_util.c ../../pd/portaudio/src/os/win/pa_win_waveformat.c ../../pd /portaudio/src/os/win/pa_win_coinitialize.c ../../pd/portaudio/src/hostapi/wmme /pa_win_wmme.c g_all_guis.h m_imp.h g_canvas.h m_pd.h s_stuff.h g_magicglass.h s_audio_paring.h scandir.h ../portaudio/src/os/win/pa_win_coinitialize.h \ makefile.dependencies /bin/sh: -c: line 0: syntax error near unexpected token `(' /bin/sh: -c: line 0: `gcc -I../../pd/src -IC:\Program Files (x86)/Jack/includes -I/c/Progra~1/jack/includes -I/c/Progra~2/jack/includes -I/c/Progra~3/jack/inclu des -I../../pd/portaudio -I../../pd/portaudio/include -I../../pd/portaudio/src/c ommon -I../../pd/portaudio/src/os/win -I../../pd/asio/ASIOSDK2/common -I../../pd /asio/ASIOSDK2/host -I../../pd/asio/ASIOSDK2/host/pc -DPD -DPD_INTERNAL -DPA_USE _ASIO -DPA_USE_WMME -DWINVER=0x0502 -DUSEAPI_MMIO -DUSEAPI_PORTAUDIO -mms-bitfi elds -DWISHAPP='wish85.exe' -Wall -W -Wstrict-prototypes -Wno-unused -Wno-unu sed-parameter -Wno-parentheses -Wno-switch -O3 -funroll-loops -fomit-frame-poin ter -M g_canvas.c g_graph.c g_text.c g_rtext.c g_array.c g_template.c g_io.c g _scalar.c g_traversal.c g_guiconnect.c g_readwrite.c g_editor.c g_all_guis.c m _pd.c m_class.c m_obj.c m_atom.c m_memory.c m_binbuf.c m_conf_pdextended.c m_gl ob.c m_sched.c s_main.c s_inter.c s_file.c s_print.c s_loader.c s_path.c s_ent ry.c s_audio.c s_midi.c s_utf8.c d_ugen.c d_ctl.c d_arithmetic.c d_osc.c d_fil ter.c d_math.c d_array.c d_global.c d_delay.c d_resample.c x_arithmetic.c x_c onnective.c x_acoustics.c d_soundfile.c e_fft.c e_gfxstub.c e_dac.c e_midi.c g_magicglass.c scandir.c import.c path.c print.c closebang.c initbang.c loadba ng.c d_fft_mayer.c d_fftroutine.c s_audio_pa.c s_audio_paring.c s_audio_jack.c s_audio_mmio.c s_midi_mmio.c ../../pd/portaudio/src/common/pa_stream.c ../../p d/portaudio/src/common/pa_trace.c
Re: [PD] Jack support on Windows
Yeah.. I can gender a log file now.. The next log I will use that! Thanks! 2013/1/20 IOhannes zmölnig zmoel...@iem.at On 01/20/2013 01:50 PM, Esteban Viveros wrote: HC, can the compilation process gender a log file? i'm not HC, but hopefully i can give some hints. $ make make.log will redirect all stdout to make.log since most errors got to stderr, you probably want to do: $ make make.log 21 which will first redirect stderr to stdout, and then capture stdout to make.log. gfamsdr IOhannes __**_ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/** listinfo/pd-list http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
2013/1/21 Esteban Viveros emvive...@gmail.com Well.. I have here only MinGW shell and Uninstall mingw-get on MinGW menu.. I don't know... But using MinGW shell I have the same output... This shell is not the same msys shell? I tried in mingw shell the command (http://www.mingw.org/wiki/MSYS): mount c:/mingw /mingw and I have: /bin/mount: mount point '/mingw' is already in use This may mean that everything is ok with msys? -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
2013/1/21 Hans-Christoph Steiner h...@at.or.at MinGW Shell is what you want. They used to call that the MSYS shell. Ok.. I tryed it... Same output... -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
On 01/21/2013 06:44 PM, Esteban Viveros wrote: 2013/1/21 Hans-Christoph Steiner h...@at.or.at MinGW Shell is what you want. They used to call that the MSYS shell. Ok.. I tryed it... Same output... Did you replace the makefile.mingw? .hc ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
2013/1/21 Hans-Christoph Steiner h...@at.or.at Did you replace the makefile.mingw? Ops... My fault... I'm was tried the worng makefile.mingw .. :/ Excuses... Now I have new troubles.. :) See make.log attached... (Thanks IOhannes!!) -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ make.log Description: Binary data ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
You need to get the ASIO files: http://puredata.info/docs/developer/WindowsMinGW once you get the asiosdk2.2.zip, then unzip it into ~/pure-data/pd/asio so that there is a folder called ASIOSDK2 like this: ~/pure-data/pd/asio/ASIOSDK2 .hc On 01/21/2013 07:15 PM, Esteban Viveros wrote: 2013/1/21 Hans-Christoph Steiner h...@at.or.at Did you replace the makefile.mingw? Ops... My fault... I'm was tried the worng makefile.mingw .. :/ Excuses... Now I have new troubles.. :) See make.log attached... (Thanks IOhannes!!) ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
2013/1/21 Hans-Christoph Steiner h...@at.or.at once you get the asiosdk2.2.zip, then unzip it into ~/pure-data/pd/asio so that there is a folder called ASIOSDK2 like this: ~/pure-data/pd/asio/ASIOSDK2 Ok! It's done. New log file -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ make.log Description: Binary data ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Getting closer... try the newly attached makefile. .hc On 01/21/2013 07:25 PM, Esteban Viveros wrote: 2013/1/21 Hans-Christoph Steiner h...@at.or.at once you get the asiosdk2.2.zip, then unzip it into ~/pure-data/pd/asio so that there is a folder called ASIOSDK2 like this: ~/pure-data/pd/asio/ASIOSDK2 Ok! It's done. New log file # how Miller builds Pd on Windows: # http://lists.puredata.info/pipermail/pd-dev/2004-10/002981.html CC = gcc CXX = g++ cvs_root_dir = ../.. pd_src = $(cvs_root_dir)/pd DLL_DIR = $(pd_src)/src BIN_DIR = ../bin VPATH = $(pd_src)/src prefix = /usr/local/pd exec_prefix = $(prefix) includedir = $(prefix)/include libdir = $(exec_prefix)/lib mandir = $(prefix)/man bindir = $(exec_prefix)/bin GFLAGS = -DINSTALL_PREFIX=\$(prefix)\ # varibles to match packages/Makefile.buildlayout so that they can be easily # overridden when building Pd-extended builds. h...@at.or.at libpddir = $(prefix) pddocdir = $(libpddir)/doc libpdbindir = $(libpddir)/bin PDEXEC = pd.exe PDDLL = pd.dll DLLWRAP= dllwrap MORECFLAGS = -O3 -funroll-loops -fomit-frame-pointer PADIR = $(pd_src)/portaudio ASIODIR = $(pd_src)/asio/ASIOSDK2 ASIOINC = -I$(ASIODIR)/common -I$(ASIODIR)/host -I$(ASIODIR)/host/pc INCPA = -I$(PADIR) -I$(PADIR)/include -I$(PADIR)/src/common -I$(PADIR)/src/os/win $(ASIOINC) INCLUDE = -I$(pd_src)/src -I$(PROGRAMFILES)/Jack/includes GINCLUDE = -I/usr/local/include $(INCLUDE) LDFLAGS = -L$(PROGRAMFILES)/Jack/lib LIBS = -lm -lwsock32 -lwinmm -lole32 -lpthreadGC2 $(PROGRAMFILES)/Jack/lib/libjack.lib OPT_CFLAGS = WARN_CFLAGS = -Wall -W -Wstrict-prototypes -Wno-unused \ -Wno-unused-parameter -Wno-parentheses -Wno-switch # Some old code in asio/ASIOSDK2/common/combase.h needs to be ignored, # we do this by setting the WINVER macro to min Windows XP aka 5.1. # Also, for SetDllDirectory() s_loader.c, we need a minium of Windows # XP SP1. WINVER isnt' fine-grained enough for that, so we use the # next minor version of Windows, 5.2. ARCH_CFLAGS = -DPD -DPD_INTERNAL -DPA_USE_ASIO -DPA_USE_WMME -DWINVER=0x0502 \ -DUSEAPI_MMIO -DUSEAPI_PORTAUDIO -DUSEAPI_JACK -DJACK_XRUN \ -mms-bitfields -DWISHAPP='wish85.exe' CFLAGS += $(ARCH_CFLAGS) $(WARN_CFLAGS) $(OPT_CFLAGS) $(MORECFLAGS) STRIP = strip --strip-unneeded -R .note -R .comment # the sources PASRC = s_audio_pa.c s_audio_paring.c s_audio_jack.c \ s_audio_mmio.c s_midi_mmio.c \ $(PADIR)/src/common/pa_stream.c \ $(PADIR)/src/common/pa_trace.c \ $(PADIR)/src/common/pa_process.c \ $(PADIR)/src/common/pa_front.c \ $(PADIR)/src/common/pa_dither.c \ $(PADIR)/src/common/pa_cpuload.c \ $(PADIR)/src/common/pa_converters.c \ $(PADIR)/src/common/pa_allocation.c \ $(PADIR)/src/common/pa_ringbuffer.c \ $(PADIR)/src/os/win/pa_win_hostapis.c \ $(PADIR)/src/os/win/pa_win_util.c \ $(PADIR)/src/os/win/pa_win_waveformat.c \ $(PADIR)/src/os/win/pa_win_coinitialize.c \ $(PADIR)/src/hostapi/wmme/pa_win_wmme.c ASIOSRC = $(PADIR)/src/hostapi/asio/iasiothiscallresolver.cpp \ $(PADIR)/src/hostapi/asio/pa_asio.cpp \ $(ASIODIR)/common/asio.cpp \ $(ASIODIR)/host/asiodrivers.cpp \ $(ASIODIR)/host/pc/asiolist.cpp #VSRC = s_audio_vst.c PMDIR = ../portmidi PMINCLUDE = -I$(PMDIR)/pm_common -I$(PMDIR)/pm_win -I$(PMDIR)/porttime -DNEWBUFFER PMSRC = $(PMDIR)/pm_common/portmidi.c \ $(PMDIR)/pm_common/pmutil.c \ $(PMDIR)/porttime/porttime.c \ $(PMDIR)/porttime/ptwinmm.c \ $(PMDIR)/pm_win/pmwin.c \ $(PMDIR)/pm_win/pmwinmm.c PMOBJ = $(PMSRC:.c=.o) HEADERS = g_all_guis.h m_imp.h g_canvas.h m_pd.h s_stuff.h g_magicglass.h \ $(wildcard ../portaudio/common/*.h) s_audio_paring.h scandir.h \ ../portaudio/src/os/win/pa_win_coinitialize.h SRC = g_canvas.c g_graph.c g_text.c g_rtext.c g_array.c g_template.c \ g_io.c g_scalar.c g_traversal.c g_guiconnect.c g_readwrite.c g_editor.c \ g_all_guis.c \ m_pd.c m_class.c m_obj.c m_atom.c m_memory.c m_binbuf.c \ m_conf_pdextended.c m_glob.c m_sched.c \ s_main.c s_inter.c s_file.c s_print.c \ s_loader.c s_path.c s_entry.c s_audio.c s_midi.c \ s_utf8.c \ d_ugen.c d_ctl.c d_arithmetic.c d_osc.c d_filter.c \ d_math.c d_array.c d_global.c \ d_delay.c d_resample.c \ x_arithmetic.c x_connective.c \ x_acoustics.c d_soundfile.c \ e_fft.c e_gfxstub.c e_dac.c e_midi.c \ g_magicglass.c \ scandir.c \ import.c path.c print.c closebang.c initbang.c loadbang.c # FFTW #SRC += d_fft_fftw.c d_fftroutine.c # Mayer FFT SRC += d_fft_mayer.c d_fftroutine.c SRSRC = u_pdsend.c u_pdreceive.c OBJ = $(SRC:.c=.o) SROBJ = $(SRSRC:.c=.o) PAOBJ = $(PASRC:.c=.o) ASIOOBJ = $(ASIOSRC:.cpp=.o) #VOBJ = $(VSRC:.c=.o) OBJC = $(OBJ) $(PAOBJ) $(ASIOOBJ) $(PMOBJ) # get version from m_pd.h to use in
Re: [PD] Jack support on Windows
Ok.. It's done! How to play? 2013/1/21 Hans-Christoph Steiner h...@at.or.at Getting closer... try the newly attached makefile. .hc On 01/21/2013 07:25 PM, Esteban Viveros wrote: 2013/1/21 Hans-Christoph Steiner h...@at.or.at once you get the asiosdk2.2.zip, then unzip it into ~/pure-data/pd/asio so that there is a folder called ASIOSDK2 like this: ~/pure-data/pd/asio/ASIOSDK2 Ok! It's done. New log file -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
* download the zip version: http://autobuild.puredata.info/auto-build/2013-01-17/Pd-0.43.4-extended-20130117-windowsxp-i386.zip * unzip it into ~/pure-data * in ~/pure-data/pd/src, run: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install (make sure the last line is all on one line) Now you should be able to go to ~/pure-data/Pd-0.43.4-extended-20130117/bin and run pd.exe and have a working Pd with jack (fingers crossed) .hc On 01/21/2013 09:05 PM, Esteban Viveros wrote: Ok.. It's done! How to play? 2013/1/21 Hans-Christoph Steiner h...@at.or.at Getting closer... try the newly attached makefile. .hc On 01/21/2013 07:25 PM, Esteban Viveros wrote: 2013/1/21 Hans-Christoph Steiner h...@at.or.at once you get the asiosdk2.2.zip, then unzip it into ~/pure-data/pd/asio so that there is a folder called ASIOSDK2 like this: ~/pure-data/pd/asio/ASIOSDK2 Ok! It's done. New log file ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Yeah.. I'm trying that but nothind happend.. Maybe the pd-extended installed in system...?? 2013/1/22 Hans-Christoph Steiner h...@at.or.at * download the zip version: http://autobuild.puredata.info/auto-build/2013-01-17/Pd-0.43.4-extended-20130117-windowsxp-i386.zip * unzip it into ~/pure-data * in ~/pure-data/pd/src, run: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install (make sure the last line is all on one line) Now you should be able to go to ~/pure-data/Pd-0.43.4-extended-20130117/bin and run pd.exe and have a working Pd with jack (fingers crossed) .hc On 01/21/2013 09:05 PM, Esteban Viveros wrote: Ok.. It's done! How to play? 2013/1/21 Hans-Christoph Steiner h...@at.or.at Getting closer... try the newly attached makefile. .hc On 01/21/2013 07:25 PM, Esteban Viveros wrote: 2013/1/21 Hans-Christoph Steiner h...@at.or.at once you get the asiosdk2.2.zip, then unzip it into ~/pure-data/pd/asio so that there is a folder called ASIOSDK2 like this: ~/pure-data/pd/asio/ASIOSDK2 Ok! It's done. New log file -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
You can look at the date on the pd.exe in ~/pure-data/Pd-0.43.4-extended-20130117/bin and see if its your new one. And make sure this is all on the same line: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install .hc On 01/21/2013 09:11 PM, Esteban Viveros wrote: Yeah.. I'm trying that but nothind happend.. Maybe the pd-extended installed in system...?? 2013/1/22 Hans-Christoph Steiner h...@at.or.at * download the zip version: http://autobuild.puredata.info/auto-build/2013-01-17/Pd-0.43.4-extended-20130117-windowsxp-i386.zip * unzip it into ~/pure-data * in ~/pure-data/pd/src, run: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install (make sure the last line is all on one line) Now you should be able to go to ~/pure-data/Pd-0.43.4-extended-20130117/bin and run pd.exe and have a working Pd with jack (fingers crossed) .hc On 01/21/2013 09:05 PM, Esteban Viveros wrote: Ok.. It's done! How to play? 2013/1/21 Hans-Christoph Steiner h...@at.or.at Getting closer... try the newly attached makefile. .hc On 01/21/2013 07:25 PM, Esteban Viveros wrote: 2013/1/21 Hans-Christoph Steiner h...@at.or.at once you get the asiosdk2.2.zip, then unzip it into ~/pure-data/pd/asio so that there is a folder called ASIOSDK2 like this: ~/pure-data/pd/asio/ASIOSDK2 Ok! It's done. New log file ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Yes... Pd-0.43.4-extended-20130117 .. Nut I need to run the pd.exe in ~/pure-data/pd/src or ~/pure-data/Pd-0.43.4-extended-20130117/bin ?? ~/pure-data/Pd-0.43.4-extended-20130117/bin/pd.exe are running.. But I don't have jackrouter option... ~/pure-data/pd/src/pd.exe nothing happens 2013/1/22 Hans-Christoph Steiner h...@at.or.at You can look at the date on the pd.exe in ~/pure-data/Pd-0.43.4-extended-20130117/bin and see if its your new one. And make sure this is all on the same line: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install .hc On 01/21/2013 09:11 PM, Esteban Viveros wrote: Yeah.. I'm trying that but nothind happend.. Maybe the pd-extended installed in system...?? 2013/1/22 Hans-Christoph Steiner h...@at.or.at * download the zip version: http://autobuild.puredata.info/auto-build/2013-01-17/Pd-0.43.4-extended-20130117-windowsxp-i386.zip * unzip it into ~/pure-data * in ~/pure-data/pd/src, run: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install (make sure the last line is all on one line) Now you should be able to go to ~/pure-data/Pd-0.43.4-extended-20130117/bin and run pd.exe and have a working Pd with jack (fingers crossed) .hc On 01/21/2013 09:05 PM, Esteban Viveros wrote: Ok.. It's done! How to play? 2013/1/21 Hans-Christoph Steiner h...@at.or.at Getting closer... try the newly attached makefile. .hc On 01/21/2013 07:25 PM, Esteban Viveros wrote: 2013/1/21 Hans-Christoph Steiner h...@at.or.at once you get the asiosdk2.2.zip, then unzip it into ~/pure-data/pd/asio so that there is a folder called ASIOSDK2 like this: ~/pure-data/pd/asio/ASIOSDK2 Ok! It's done. New log file -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
I tried to run in ~/pure-data/pd/src/pd in cms and I have: C:\MinGW\msys\1.0\home\Esteban\pure-data\pd\srcpd spawnl: No such file or directory C:\MinGW\msys\1.0\home\Esteban\pure-data\pd\bin\wish85.exe: couldn't load TCL 2013/1/22 Esteban Viveros emvive...@gmail.com Yes... Pd-0.43.4-extended-20130117 .. Nut I need to run the pd.exe in ~/pure-data/pd/src or ~/pure-data/Pd-0.43.4-extended-20130117/bin ?? ~/pure-data/Pd-0.43.4-extended-20130117/bin/pd.exe are running.. But I don't have jackrouter option... ~/pure-data/pd/src/pd.exe nothing happens 2013/1/22 Hans-Christoph Steiner h...@at.or.at You can look at the date on the pd.exe in ~/pure-data/Pd-0.43.4-extended-20130117/bin and see if its your new one. And make sure this is all on the same line: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install .hc On 01/21/2013 09:11 PM, Esteban Viveros wrote: Yeah.. I'm trying that but nothind happend.. Maybe the pd-extended installed in system...?? 2013/1/22 Hans-Christoph Steiner h...@at.or.at * download the zip version: http://autobuild.puredata.info/auto-build/2013-01-17/Pd-0.43.4-extended-20130117-windowsxp-i386.zip * unzip it into ~/pure-data * in ~/pure-data/pd/src, run: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install (make sure the last line is all on one line) Now you should be able to go to ~/pure-data/Pd-0.43.4-extended-20130117/bin and run pd.exe and have a working Pd with jack (fingers crossed) .hc On 01/21/2013 09:05 PM, Esteban Viveros wrote: Ok.. It's done! How to play? 2013/1/21 Hans-Christoph Steiner h...@at.or.at Getting closer... try the newly attached makefile. .hc On 01/21/2013 07:25 PM, Esteban Viveros wrote: 2013/1/21 Hans-Christoph Steiner h...@at.or.at once you get the asiosdk2.2.zip, then unzip it into ~/pure-data/pd/asio so that there is a folder called ASIOSDK2 like this: ~/pure-data/pd/asio/ASIOSDK2 Ok! It's done. New log file -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Ah, I think I know the issue, try rebulding it, there were a couple of changes in the latest makefile.mingw that didn't take effect: cd ~/pure-data/src make -f makefile.mingw clean make -f makefile.mingw make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install Then the one you want is in: ~/pure-data/Pd-0.43.4-extended-20130117/bin You can't run it directly in ~/pure-data/pd/src because it is missing all of the Tcl files that are in ~/pure-data/Pd-0.43.4-extended-20130117/bin .hc On 01/21/2013 09:19 PM, Esteban Viveros wrote: Yes... Pd-0.43.4-extended-20130117 .. Nut I need to run the pd.exe in ~/pure-data/pd/src or ~/pure-data/Pd-0.43.4-extended-20130117/bin ?? ~/pure-data/Pd-0.43.4-extended-20130117/bin/pd.exe are running.. But I don't have jackrouter option... ~/pure-data/pd/src/pd.exe nothing happens 2013/1/22 Hans-Christoph Steiner h...@at.or.at You can look at the date on the pd.exe in ~/pure-data/Pd-0.43.4-extended-20130117/bin and see if its your new one. And make sure this is all on the same line: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install .hc On 01/21/2013 09:11 PM, Esteban Viveros wrote: Yeah.. I'm trying that but nothind happend.. Maybe the pd-extended installed in system...?? 2013/1/22 Hans-Christoph Steiner h...@at.or.at * download the zip version: http://autobuild.puredata.info/auto-build/2013-01-17/Pd-0.43.4-extended-20130117-windowsxp-i386.zip * unzip it into ~/pure-data * in ~/pure-data/pd/src, run: make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install (make sure the last line is all on one line) Now you should be able to go to ~/pure-data/Pd-0.43.4-extended-20130117/bin and run pd.exe and have a working Pd with jack (fingers crossed) .hc On 01/21/2013 09:05 PM, Esteban Viveros wrote: Ok.. It's done! How to play? 2013/1/21 Hans-Christoph Steiner h...@at.or.at Getting closer... try the newly attached makefile. .hc On 01/21/2013 07:25 PM, Esteban Viveros wrote: 2013/1/21 Hans-Christoph Steiner h...@at.or.at once you get the asiosdk2.2.zip, then unzip it into ~/pure-data/pd/asio so that there is a folder called ASIOSDK2 like this: ~/pure-data/pd/asio/ASIOSDK2 Ok! It's done. New log file ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Really Patrice... But How can I select the text?? I'm trying with the mouse but that's don't working here... 2013/1/19 Patrice Colet colet.patr...@free.fr Excuse the (... lot of letters..) but my cmd don't have ctrl+c option.. :/ hello, Are you really using cmd for compiling, or msys console? On cmd you can select and copy with menu actions, cygwin uses cmd... In msys console it's truly like a unix terminal, Ctrl+Insert and Shift+Insert for copying and pasting ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
HC, can the compilation process gender a log file? 2013/1/18 Hans-Christoph Steiner h...@at.or.at Please Reply All so that your emails go to the list also. Can you post the whole build log? those lot of letters hold the key to the problem :) .hc On 01/18/2013 11:54 AM, Esteban Viveros wrote: Now I can see some letters on cmd... hehehehe But not yet.. I have Error 1 The compilation start with makefile.mingw:300: makefile.dependencies: No such file or directory (... lot of letters ...) makefile.mingw:273: recipe for targets 'makefile.dependencies' failed make: *** [makefile.dependencies] Error 1 Excuse the (... lot of letters..) but my cmd don't have ctrl+c option.. :/ 2013/1/18 Hans-Christoph Steiner h...@at.or.at Oops sorry, it should be: cd ~/pure-data/pd/src make -f makefile.mingw Basically run the make command in the same folder as the file makefile.mingw. .hc On 01/18/2013 09:34 AM, Esteban Viveros wrote: :/ I have the same output.. remembering in ~/pure-data I have now 3 folders: Pd-0.43.4-extended-20130117 pd sources 2013/1/18 Hans-Christoph Steiner h...@at.or.at Oops, yeah, I forgot there is one ugly little detail. Run this in the Terminal: cd ~/pure-data mv pd-extended pd cd pd make -f makefile.mingw Now you can do the rest of the stuff from the previous email. .hc On 01/18/2013 08:10 AM, Esteban Viveros wrote: when I ran the command: make -f makefile.mingw I have the response: (in ~/puredata) make: makefile.mingw: No such file or directory make: *** No rule to make target 'makefile.mingw'. Stop. (in ~/puredata/pd-extended) make: makefile.mingw: No such file or directory make: *** No rule to make target 'makefile.mingw'. Stop. (in ~/puredata/pd-extended/src) makefile.mingw:300: makefile.dependencies: No such file or directory make: *** No rule to make target '../../pd/portaudio/src/common/pa_stream.c' , needed by 'makefile.dependencies'. Stop. 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't want the auto-build script for this. Its more trouble than its worth. Do this instead: * download the zip version: http://autobuild.puredata.info/auto-build/2013-01-17/Pd-0.43.4-extended-20130117-windowsxp-i386.zip * unzip it into ~/pure-data * run these commands: cd ~/pure-data git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd ~/pure-data/pd-extended * now copy attached file into ~/pure-data/pd-extended/src/ * now run these commands: make -f makefile.mingw make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install (make sure the last line is all on one line) Now you should be able to go to ~/pure-data/Pd-0.43.4-extended-20130117/bin and run pd.exe and have a working Pd with jack (fingers crossed) .hc On 01/17/2013 05:40 PM, Esteban Viveros wrote: I need to run git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git in the same folder of the libraries built? (~/pure-data/sources) In my case I need to do this with your script: (?) mkdir ~/auto-build cd ~/auto-buildhttps:// pure-data.svn.sourceforge.net/svnroot/pure-data/branches/pd-extended/0.43 pd-extended ~/auto-build/pd-extended/scripts/auto-build/pd-extended-auto-builder.sh 2013/1/17 Hans-Christoph Steiner h...@at.or.at Yeah, it looks like the binary installer for jack is all you need. No problem if you just built all the libraries in Building Library Dependencies For Windows From SVN '/Sources'. I was just trying to save you that effort, since its not needed for what you want to do. But now you are setup to build all of Pd-extended and perhaps even readanysf~ too :-D You will definitely need to download the Pd-extended source. .hc On 01/17/2013 03:37 PM, Esteban Viveros wrote: I have one more question... When you say to install Jack, you say the binary software or I need to find a source code of Jack audio? 2013/1/17 Esteban Viveros emvive...@gmail.com Ops... Already done... :/ Now only remains download pd source.. Did I that too wrong? I'm thinking to download the pd source and then run your script... Can I continue? 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't need that stuff at all for what you are doing, skip that step. That's only for building things like Gem. .hc On 01/16/2013 07:15 PM, Esteban Viveros wrote: Ok... Now I need to know where is pure-data directory..? It's needed to Building Library Dependencies For Windows From SVN '/Sources' 2013/1/16 Hans-Christoph Steiner h...@at.or.at I updated the makefile.mingw a bit, I forgot to add something before. Its attached. .hc On 01/16/2013 06:44 PM, Esteban Viveros wrote:
Re: [PD] Jack support on Windows
Ops... I tryied the option select all and the select with mouse feature are working now in cmd... 2013/1/20 Esteban Viveros emvive...@gmail.com Really Patrice... But How can I select the text?? I'm trying with the mouse but that's don't working here... 2013/1/19 Patrice Colet colet.patr...@free.fr Excuse the (... lot of letters..) but my cmd don't have ctrl+c option.. :/ hello, Are you really using cmd for compiling, or msys console? On cmd you can select and copy with menu actions, cygwin uses cmd... In msys console it's truly like a unix terminal, Ctrl+Insert and Shift+Insert for copying and pasting ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
On 01/20/2013 01:50 PM, Esteban Viveros wrote: HC, can the compilation process gender a log file? i'm not HC, but hopefully i can give some hints. $ make make.log will redirect all stdout to make.log since most errors got to stderr, you probably want to do: $ make make.log 21 which will first redirect stderr to stdout, and then capture stdout to make.log. gfamsdr IOhannes ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Ok, that's much better! Try the attached makefile.mingw. The problem is actually here: /bin/sh: -c: line 0: syntax error near unexpected token `(' /bin/sh: -c: line 0: `gcc -I../../pd/src -IC:\Program Files (x86)/Jack/includes -I/c/Progra~1/jack/includes -I/c/Progra~2/jack/includes -I/c/Progra~3/jack/includes Also, it looks like you're using cmd.exe, like I think patco said. You should use the MinGW Shell, it is sometimes called MSYS. You can find it in your Program Files menu under MinGW. Building Pd-extended might work under cmd.exe, but I've never tried. I always use the MinGW MSYS shell. .hc On 01/20/2013 07:56 AM, Esteban Viveros wrote: Finally! That's the result of my attempting compilation C:\MinGW\msys\1.0\home\Esteban\pure-data\pd\srcmake -f makefile.mingw makefile.mingw:300: makefile.dependencies: No such file or directory gcc -I../../pd/src -IC:\Program Files (x86)/Jack/includes -I/c/Progra~1/jack/inc ludes -I/c/Progra~2/jack/includes -I/c/Progra~3/jack/includes -I../../pd/portaud io -I../../pd/portaudio/include -I../../pd/portaudio/src/common -I../../pd/porta udio/src/os/win -I../../pd/asio/ASIOSDK2/common -I../../pd/asio/ASIOSDK2/host -I ../../pd/asio/ASIOSDK2/host/pc -DPD -DPD_INTERNAL -DPA_USE_ASIO -DPA_USE_WMME -D WINVER=0x0502 -DUSEAPI_MMIO -DUSEAPI_PORTAUDIO -mms-bitfields -DWISHAPP='wish8 5.exe' -Wall -W -Wstrict-prototypes -Wno-unused -Wno-unused-parameter -Wno-par entheses -Wno-switch -O3 -funroll-loops -fomit-frame-pointer -M g_canvas.c g_g raph.c g_text.c g_rtext.c g_array.c g_template.c g_io.c g_scalar.c g_traversal. c g_guiconnect.c g_readwrite.c g_editor.c g_all_guis.c m_pd.c m_class.c m_obj. c m_atom.c m_memory.c m_binbuf.c m_conf_pdextended.c m_glob.c m_sched.c s_main .c s_inter.c s_file.c s_print.c s_loader.c s_path.c s_entry.c s_audio.c s_midi. c s_utf8.c d_ugen.c d_ctl.c d_arithmetic.c d_osc.c d_filter.c d_math.c d_arra y.c d_global.c d_delay.c d_resample.c x_arithmetic.c x_connective.c x_acousti cs.c d_soundfile.c e_fft.c e_gfxstub.c e_dac.c e_midi.c g_magicglass.c scandi r.c import.c path.c print.c closebang.c initbang.c loadbang.c d_fft_mayer.c d_f ftroutine.c s_audio_pa.c s_audio_paring.c s_audio_jack.c s_audio_mmio.c s_midi_ mmio.c ../../pd/portaudio/src/common/pa_stream.c ../../pd/portaudio/src/common /pa_trace.c ../../pd/portaudio/src/common/pa_process.c ../../pd/portaudio/src/ common/pa_front.c ../../pd/portaudio/src/common/pa_dither.c ../../pd/portaudio /src/common/pa_cpuload.c ../../pd/portaudio/src/common/pa_converters.c ../../p d/portaudio/src/common/pa_allocation.c ../../pd/portaudio/src/common/pa_ringbuf fer.c ../../pd/portaudio/src/os/win/pa_win_hostapis.c ../../pd/portaudio/src/o s/win/pa_win_util.c ../../pd/portaudio/src/os/win/pa_win_waveformat.c ../../pd /portaudio/src/os/win/pa_win_coinitialize.c ../../pd/portaudio/src/hostapi/wmme /pa_win_wmme.c g_all_guis.h m_imp.h g_canvas.h m_pd.h s_stuff.h g_magicglass.h s_audio_paring.h scandir.h ../portaudio/src/os/win/pa_win_coinitialize.h \ makefile.dependencies /bin/sh: -c: line 0: syntax error near unexpected token `(' /bin/sh: -c: line 0: `gcc -I../../pd/src -IC:\Program Files (x86)/Jack/includes -I/c/Progra~1/jack/includes -I/c/Progra~2/jack/includes -I/c/Progra~3/jack/inclu des -I../../pd/portaudio -I../../pd/portaudio/include -I../../pd/portaudio/src/c ommon -I../../pd/portaudio/src/os/win -I../../pd/asio/ASIOSDK2/common -I../../pd /asio/ASIOSDK2/host -I../../pd/asio/ASIOSDK2/host/pc -DPD -DPD_INTERNAL -DPA_USE _ASIO -DPA_USE_WMME -DWINVER=0x0502 -DUSEAPI_MMIO -DUSEAPI_PORTAUDIO -mms-bitfi elds -DWISHAPP='wish85.exe' -Wall -W -Wstrict-prototypes -Wno-unused -Wno-unu sed-parameter -Wno-parentheses -Wno-switch -O3 -funroll-loops -fomit-frame-poin ter -M g_canvas.c g_graph.c g_text.c g_rtext.c g_array.c g_template.c g_io.c g _scalar.c g_traversal.c g_guiconnect.c g_readwrite.c g_editor.c g_all_guis.c m _pd.c m_class.c m_obj.c m_atom.c m_memory.c m_binbuf.c m_conf_pdextended.c m_gl ob.c m_sched.c s_main.c s_inter.c s_file.c s_print.c s_loader.c s_path.c s_ent ry.c s_audio.c s_midi.c s_utf8.c d_ugen.c d_ctl.c d_arithmetic.c d_osc.c d_fil ter.c d_math.c d_array.c d_global.c d_delay.c d_resample.c x_arithmetic.c x_c onnective.c x_acoustics.c d_soundfile.c e_fft.c e_gfxstub.c e_dac.c e_midi.c g_magicglass.c scandir.c import.c path.c print.c closebang.c initbang.c loadba ng.c d_fft_mayer.c d_fftroutine.c s_audio_pa.c s_audio_paring.c s_audio_jack.c s_audio_mmio.c s_midi_mmio.c ../../pd/portaudio/src/common/pa_stream.c ../../p d/portaudio/src/common/pa_trace.c ../../pd/portaudio/src/common/pa_process.c . ./../pd/portaudio/src/common/pa_front.c ../../pd/portaudio/src/common/pa_dither .c ../../pd/portaudio/src/common/pa_cpuload.c ../../pd/portaudio/src/common/pa _converters.c ../../pd/portaudio/src/common/pa_allocation.c
Re: [PD] Jack support on Windows
Excuse the (... lot of letters..) but my cmd don't have ctrl+c option.. :/ hello, Are you really using cmd for compiling, or msys console? On cmd you can select and copy with menu actions, cygwin uses cmd... In msys console it's truly like a unix terminal, Ctrl+Insert and Shift+Insert for copying and pasting ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Oops, yeah, I forgot there is one ugly little detail. Run this in the Terminal: cd ~/pure-data mv pd-extended pd cd pd make -f makefile.mingw Now you can do the rest of the stuff from the previous email. .hc On 01/18/2013 08:10 AM, Esteban Viveros wrote: when I ran the command: make -f makefile.mingw I have the response: (in ~/puredata) make: makefile.mingw: No such file or directory make: *** No rule to make target 'makefile.mingw'. Stop. (in ~/puredata/pd-extended) make: makefile.mingw: No such file or directory make: *** No rule to make target 'makefile.mingw'. Stop. (in ~/puredata/pd-extended/src) makefile.mingw:300: makefile.dependencies: No such file or directory make: *** No rule to make target '../../pd/portaudio/src/common/pa_stream.c' , needed by 'makefile.dependencies'. Stop. 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't want the auto-build script for this. Its more trouble than its worth. Do this instead: * download the zip version: http://autobuild.puredata.info/auto-build/2013-01-17/Pd-0.43.4-extended-20130117-windowsxp-i386.zip * unzip it into ~/pure-data * run these commands: cd ~/pure-data git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd ~/pure-data/pd-extended * now copy attached file into ~/pure-data/pd-extended/src/ * now run these commands: make -f makefile.mingw make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install (make sure the last line is all on one line) Now you should be able to go to ~/pure-data/Pd-0.43.4-extended-20130117/bin and run pd.exe and have a working Pd with jack (fingers crossed) .hc On 01/17/2013 05:40 PM, Esteban Viveros wrote: I need to run git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git in the same folder of the libraries built? (~/pure-data/sources) In my case I need to do this with your script: (?) mkdir ~/auto-build cd ~/auto-buildhttps:// pure-data.svn.sourceforge.net/svnroot/pure-data/branches/pd-extended/0.43 pd-extended ~/auto-build/pd-extended/scripts/auto-build/pd-extended-auto-builder.sh 2013/1/17 Hans-Christoph Steiner h...@at.or.at Yeah, it looks like the binary installer for jack is all you need. No problem if you just built all the libraries in Building Library Dependencies For Windows From SVN '/Sources'. I was just trying to save you that effort, since its not needed for what you want to do. But now you are setup to build all of Pd-extended and perhaps even readanysf~ too :-D You will definitely need to download the Pd-extended source. .hc On 01/17/2013 03:37 PM, Esteban Viveros wrote: I have one more question... When you say to install Jack, you say the binary software or I need to find a source code of Jack audio? 2013/1/17 Esteban Viveros emvive...@gmail.com Ops... Already done... :/ Now only remains download pd source.. Did I that too wrong? I'm thinking to download the pd source and then run your script... Can I continue? 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't need that stuff at all for what you are doing, skip that step. That's only for building things like Gem. .hc On 01/16/2013 07:15 PM, Esteban Viveros wrote: Ok... Now I need to know where is pure-data directory..? It's needed to Building Library Dependencies For Windows From SVN '/Sources' 2013/1/16 Hans-Christoph Steiner h...@at.or.at I updated the makefile.mingw a bit, I forgot to add something before. Its attached. .hc On 01/16/2013 06:44 PM, Esteban Viveros wrote: gcc.exe ,GCC. 4.6.2 2013/1/16 Hans-Christoph Steiner h...@at.or.at On 01/16/2013 06:28 PM, Esteban Viveros wrote: HC, I have two question at time.. First, I need to add Cygwin to system path? If yes, I run SETX path c:\cygwin;c:\cygwin\bin;%path% in Cygwin Terminal? This is probably optional but cygwin is useful. You do it from the System control panel: http://www.computerhope.com/issues/ch000549.htm If you install TortoiseSVN, I don't think you need cygwin at all (watch out for download links in the big add in that page): http://tortoisesvn.net/downloads.html Two, In session: Copying Libgmp-10Dll for Cc1.Exe I don't have /mingw/libexec/gcc/mingw32/4.7.2/ but I have /mingw/libexec/gcc/mingw32/4.6.2 I need to create the 4.7.2 directory or copy the dll's to 4.6.2? Copy the dlls to the existing folder, don't create a new one. You can tell which version of gcc you have by doing: gcc --version My guess is that you have 4.6.2, which should work fine. .hc 2013/1/16 Hans-Christoph Steiner h...@at.or.at Start by installing Jack on your windows machine and setting up a Pd build environment: http://puredata.info/docs/developer/WindowsMinGW You can skip the Building library dependencies for Windows from SVN '/sources' section for now. Then in the MSYS MinGW shell, do this: git clone git://
Re: [PD] Jack support on Windows
:/ I have the same output.. remembering in ~/pure-data I have now 3 folders: Pd-0.43.4-extended-20130117 pd sources 2013/1/18 Hans-Christoph Steiner h...@at.or.at Oops, yeah, I forgot there is one ugly little detail. Run this in the Terminal: cd ~/pure-data mv pd-extended pd cd pd make -f makefile.mingw Now you can do the rest of the stuff from the previous email. .hc On 01/18/2013 08:10 AM, Esteban Viveros wrote: when I ran the command: make -f makefile.mingw I have the response: (in ~/puredata) make: makefile.mingw: No such file or directory make: *** No rule to make target 'makefile.mingw'. Stop. (in ~/puredata/pd-extended) make: makefile.mingw: No such file or directory make: *** No rule to make target 'makefile.mingw'. Stop. (in ~/puredata/pd-extended/src) makefile.mingw:300: makefile.dependencies: No such file or directory make: *** No rule to make target '../../pd/portaudio/src/common/pa_stream.c' , needed by 'makefile.dependencies'. Stop. 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't want the auto-build script for this. Its more trouble than its worth. Do this instead: * download the zip version: http://autobuild.puredata.info/auto-build/2013-01-17/Pd-0.43.4-extended-20130117-windowsxp-i386.zip * unzip it into ~/pure-data * run these commands: cd ~/pure-data git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd ~/pure-data/pd-extended * now copy attached file into ~/pure-data/pd-extended/src/ * now run these commands: make -f makefile.mingw make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install (make sure the last line is all on one line) Now you should be able to go to ~/pure-data/Pd-0.43.4-extended-20130117/bin and run pd.exe and have a working Pd with jack (fingers crossed) .hc On 01/17/2013 05:40 PM, Esteban Viveros wrote: I need to run git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git in the same folder of the libraries built? (~/pure-data/sources) In my case I need to do this with your script: (?) mkdir ~/auto-build cd ~/auto-buildhttps:// pure-data.svn.sourceforge.net/svnroot/pure-data/branches/pd-extended/0.43 pd-extended ~/auto-build/pd-extended/scripts/auto-build/pd-extended-auto-builder.sh 2013/1/17 Hans-Christoph Steiner h...@at.or.at Yeah, it looks like the binary installer for jack is all you need. No problem if you just built all the libraries in Building Library Dependencies For Windows From SVN '/Sources'. I was just trying to save you that effort, since its not needed for what you want to do. But now you are setup to build all of Pd-extended and perhaps even readanysf~ too :-D You will definitely need to download the Pd-extended source. .hc On 01/17/2013 03:37 PM, Esteban Viveros wrote: I have one more question... When you say to install Jack, you say the binary software or I need to find a source code of Jack audio? 2013/1/17 Esteban Viveros emvive...@gmail.com Ops... Already done... :/ Now only remains download pd source.. Did I that too wrong? I'm thinking to download the pd source and then run your script... Can I continue? 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't need that stuff at all for what you are doing, skip that step. That's only for building things like Gem. .hc On 01/16/2013 07:15 PM, Esteban Viveros wrote: Ok... Now I need to know where is pure-data directory..? It's needed to Building Library Dependencies For Windows From SVN '/Sources' 2013/1/16 Hans-Christoph Steiner h...@at.or.at I updated the makefile.mingw a bit, I forgot to add something before. Its attached. .hc On 01/16/2013 06:44 PM, Esteban Viveros wrote: gcc.exe ,GCC. 4.6.2 2013/1/16 Hans-Christoph Steiner h...@at.or.at On 01/16/2013 06:28 PM, Esteban Viveros wrote: HC, I have two question at time.. First, I need to add Cygwin to system path? If yes, I run SETX path c:\cygwin;c:\cygwin\bin;%path% in Cygwin Terminal? This is probably optional but cygwin is useful. You do it from the System control panel: http://www.computerhope.com/issues/ch000549.htm If you install TortoiseSVN, I don't think you need cygwin at all (watch out for download links in the big add in that page): http://tortoisesvn.net/downloads.html Two, In session: Copying Libgmp-10Dll for Cc1.Exe I don't have /mingw/libexec/gcc/mingw32/4.7.2/ but I have /mingw/libexec/gcc/mingw32/4.6.2 I need to create the 4.7.2 directory or copy the dll's to 4.6.2? Copy the dlls to the existing folder, don't create a new one. You can tell which version of gcc you have by doing: gcc --version My guess is that you have 4.6.2, which should work fine. .hc
Re: [PD] Jack support on Windows
Oops sorry, it should be: cd ~/pure-data/pd/src make -f makefile.mingw Basically run the make command in the same folder as the file makefile.mingw. .hc On 01/18/2013 09:34 AM, Esteban Viveros wrote: :/ I have the same output.. remembering in ~/pure-data I have now 3 folders: Pd-0.43.4-extended-20130117 pd sources 2013/1/18 Hans-Christoph Steiner h...@at.or.at Oops, yeah, I forgot there is one ugly little detail. Run this in the Terminal: cd ~/pure-data mv pd-extended pd cd pd make -f makefile.mingw Now you can do the rest of the stuff from the previous email. .hc On 01/18/2013 08:10 AM, Esteban Viveros wrote: when I ran the command: make -f makefile.mingw I have the response: (in ~/puredata) make: makefile.mingw: No such file or directory make: *** No rule to make target 'makefile.mingw'. Stop. (in ~/puredata/pd-extended) make: makefile.mingw: No such file or directory make: *** No rule to make target 'makefile.mingw'. Stop. (in ~/puredata/pd-extended/src) makefile.mingw:300: makefile.dependencies: No such file or directory make: *** No rule to make target '../../pd/portaudio/src/common/pa_stream.c' , needed by 'makefile.dependencies'. Stop. 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't want the auto-build script for this. Its more trouble than its worth. Do this instead: * download the zip version: http://autobuild.puredata.info/auto-build/2013-01-17/Pd-0.43.4-extended-20130117-windowsxp-i386.zip * unzip it into ~/pure-data * run these commands: cd ~/pure-data git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd ~/pure-data/pd-extended * now copy attached file into ~/pure-data/pd-extended/src/ * now run these commands: make -f makefile.mingw make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install (make sure the last line is all on one line) Now you should be able to go to ~/pure-data/Pd-0.43.4-extended-20130117/bin and run pd.exe and have a working Pd with jack (fingers crossed) .hc On 01/17/2013 05:40 PM, Esteban Viveros wrote: I need to run git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git in the same folder of the libraries built? (~/pure-data/sources) In my case I need to do this with your script: (?) mkdir ~/auto-build cd ~/auto-buildhttps:// pure-data.svn.sourceforge.net/svnroot/pure-data/branches/pd-extended/0.43 pd-extended ~/auto-build/pd-extended/scripts/auto-build/pd-extended-auto-builder.sh 2013/1/17 Hans-Christoph Steiner h...@at.or.at Yeah, it looks like the binary installer for jack is all you need. No problem if you just built all the libraries in Building Library Dependencies For Windows From SVN '/Sources'. I was just trying to save you that effort, since its not needed for what you want to do. But now you are setup to build all of Pd-extended and perhaps even readanysf~ too :-D You will definitely need to download the Pd-extended source. .hc On 01/17/2013 03:37 PM, Esteban Viveros wrote: I have one more question... When you say to install Jack, you say the binary software or I need to find a source code of Jack audio? 2013/1/17 Esteban Viveros emvive...@gmail.com Ops... Already done... :/ Now only remains download pd source.. Did I that too wrong? I'm thinking to download the pd source and then run your script... Can I continue? 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't need that stuff at all for what you are doing, skip that step. That's only for building things like Gem. .hc On 01/16/2013 07:15 PM, Esteban Viveros wrote: Ok... Now I need to know where is pure-data directory..? It's needed to Building Library Dependencies For Windows From SVN '/Sources' 2013/1/16 Hans-Christoph Steiner h...@at.or.at I updated the makefile.mingw a bit, I forgot to add something before. Its attached. .hc On 01/16/2013 06:44 PM, Esteban Viveros wrote: gcc.exe ,GCC. 4.6.2 2013/1/16 Hans-Christoph Steiner h...@at.or.at On 01/16/2013 06:28 PM, Esteban Viveros wrote: HC, I have two question at time.. First, I need to add Cygwin to system path? If yes, I run SETX path c:\cygwin;c:\cygwin\bin;%path% in Cygwin Terminal? This is probably optional but cygwin is useful. You do it from the System control panel: http://www.computerhope.com/issues/ch000549.htm If you install TortoiseSVN, I don't think you need cygwin at all (watch out for download links in the big add in that page): http://tortoisesvn.net/downloads.html Two, In session: Copying Libgmp-10Dll for Cc1.Exe I don't have /mingw/libexec/gcc/mingw32/4.7.2/ but I have /mingw/libexec/gcc/mingw32/4.6.2 I need to create the 4.7.2 directory or copy the dll's to 4.6.2? Copy the dlls to the existing folder, don't create a new one. You can tell which version of gcc you have by doing: gcc --version My guess is that you have
Re: [PD] Jack support on Windows
Please Reply All so that your emails go to the list also. Can you post the whole build log? those lot of letters hold the key to the problem :) .hc On 01/18/2013 11:54 AM, Esteban Viveros wrote: Now I can see some letters on cmd... hehehehe But not yet.. I have Error 1 The compilation start with makefile.mingw:300: makefile.dependencies: No such file or directory (... lot of letters ...) makefile.mingw:273: recipe for targets 'makefile.dependencies' failed make: *** [makefile.dependencies] Error 1 Excuse the (... lot of letters..) but my cmd don't have ctrl+c option.. :/ 2013/1/18 Hans-Christoph Steiner h...@at.or.at Oops sorry, it should be: cd ~/pure-data/pd/src make -f makefile.mingw Basically run the make command in the same folder as the file makefile.mingw. .hc On 01/18/2013 09:34 AM, Esteban Viveros wrote: :/ I have the same output.. remembering in ~/pure-data I have now 3 folders: Pd-0.43.4-extended-20130117 pd sources 2013/1/18 Hans-Christoph Steiner h...@at.or.at Oops, yeah, I forgot there is one ugly little detail. Run this in the Terminal: cd ~/pure-data mv pd-extended pd cd pd make -f makefile.mingw Now you can do the rest of the stuff from the previous email. .hc On 01/18/2013 08:10 AM, Esteban Viveros wrote: when I ran the command: make -f makefile.mingw I have the response: (in ~/puredata) make: makefile.mingw: No such file or directory make: *** No rule to make target 'makefile.mingw'. Stop. (in ~/puredata/pd-extended) make: makefile.mingw: No such file or directory make: *** No rule to make target 'makefile.mingw'. Stop. (in ~/puredata/pd-extended/src) makefile.mingw:300: makefile.dependencies: No such file or directory make: *** No rule to make target '../../pd/portaudio/src/common/pa_stream.c' , needed by 'makefile.dependencies'. Stop. 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't want the auto-build script for this. Its more trouble than its worth. Do this instead: * download the zip version: http://autobuild.puredata.info/auto-build/2013-01-17/Pd-0.43.4-extended-20130117-windowsxp-i386.zip * unzip it into ~/pure-data * run these commands: cd ~/pure-data git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd ~/pure-data/pd-extended * now copy attached file into ~/pure-data/pd-extended/src/ * now run these commands: make -f makefile.mingw make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install (make sure the last line is all on one line) Now you should be able to go to ~/pure-data/Pd-0.43.4-extended-20130117/bin and run pd.exe and have a working Pd with jack (fingers crossed) .hc On 01/17/2013 05:40 PM, Esteban Viveros wrote: I need to run git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git in the same folder of the libraries built? (~/pure-data/sources) In my case I need to do this with your script: (?) mkdir ~/auto-build cd ~/auto-buildhttps:// pure-data.svn.sourceforge.net/svnroot/pure-data/branches/pd-extended/0.43 pd-extended ~/auto-build/pd-extended/scripts/auto-build/pd-extended-auto-builder.sh 2013/1/17 Hans-Christoph Steiner h...@at.or.at Yeah, it looks like the binary installer for jack is all you need. No problem if you just built all the libraries in Building Library Dependencies For Windows From SVN '/Sources'. I was just trying to save you that effort, since its not needed for what you want to do. But now you are setup to build all of Pd-extended and perhaps even readanysf~ too :-D You will definitely need to download the Pd-extended source. .hc On 01/17/2013 03:37 PM, Esteban Viveros wrote: I have one more question... When you say to install Jack, you say the binary software or I need to find a source code of Jack audio? 2013/1/17 Esteban Viveros emvive...@gmail.com Ops... Already done... :/ Now only remains download pd source.. Did I that too wrong? I'm thinking to download the pd source and then run your script... Can I continue? 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't need that stuff at all for what you are doing, skip that step. That's only for building things like Gem. .hc On 01/16/2013 07:15 PM, Esteban Viveros wrote: Ok... Now I need to know where is pure-data directory..? It's needed to Building Library Dependencies For Windows From SVN '/Sources' 2013/1/16 Hans-Christoph Steiner h...@at.or.at I updated the makefile.mingw a bit, I forgot to add something before. Its attached. .hc On 01/16/2013 06:44 PM, Esteban Viveros wrote: gcc.exe ,GCC. 4.6.2 2013/1/16 Hans-Christoph Steiner h...@at.or.at On 01/16/2013 06:28 PM, Esteban Viveros wrote: HC, I have two question at time.. First, I need to add Cygwin to system path? If yes, I run SETX path c:\cygwin;c:\cygwin\bin;%path% in Cygwin Terminal? This is probably optional
Re: [PD] Jack support on Windows
Yeah, it looks like the binary installer for jack is all you need. No problem if you just built all the libraries in Building Library Dependencies For Windows From SVN '/Sources'. I was just trying to save you that effort, since its not needed for what you want to do. But now you are setup to build all of Pd-extended and perhaps even readanysf~ too :-D You will definitely need to download the Pd-extended source. .hc On 01/17/2013 03:37 PM, Esteban Viveros wrote: I have one more question... When you say to install Jack, you say the binary software or I need to find a source code of Jack audio? 2013/1/17 Esteban Viveros emvive...@gmail.com Ops... Already done... :/ Now only remains download pd source.. Did I that too wrong? I'm thinking to download the pd source and then run your script... Can I continue? 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't need that stuff at all for what you are doing, skip that step. That's only for building things like Gem. .hc On 01/16/2013 07:15 PM, Esteban Viveros wrote: Ok... Now I need to know where is pure-data directory..? It's needed to Building Library Dependencies For Windows From SVN '/Sources' 2013/1/16 Hans-Christoph Steiner h...@at.or.at I updated the makefile.mingw a bit, I forgot to add something before. Its attached. .hc On 01/16/2013 06:44 PM, Esteban Viveros wrote: gcc.exe ,GCC. 4.6.2 2013/1/16 Hans-Christoph Steiner h...@at.or.at On 01/16/2013 06:28 PM, Esteban Viveros wrote: HC, I have two question at time.. First, I need to add Cygwin to system path? If yes, I run SETX path c:\cygwin;c:\cygwin\bin;%path% in Cygwin Terminal? This is probably optional but cygwin is useful. You do it from the System control panel: http://www.computerhope.com/issues/ch000549.htm If you install TortoiseSVN, I don't think you need cygwin at all (watch out for download links in the big add in that page): http://tortoisesvn.net/downloads.html Two, In session: Copying Libgmp-10Dll for Cc1.Exe I don't have /mingw/libexec/gcc/mingw32/4.7.2/ but I have /mingw/libexec/gcc/mingw32/4.6.2 I need to create the 4.7.2 directory or copy the dll's to 4.6.2? Copy the dlls to the existing folder, don't create a new one. You can tell which version of gcc you have by doing: gcc --version My guess is that you have 4.6.2, which should work fine. .hc 2013/1/16 Hans-Christoph Steiner h...@at.or.at Start by installing Jack on your windows machine and setting up a Pd build environment: http://puredata.info/docs/developer/WindowsMinGW You can skip the Building library dependencies for Windows from SVN '/sources' section for now. Then in the MSYS MinGW shell, do this: git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd pd-extended/src make -f makefile.mingw That should give you a regular Pd build. Then download a Pd-extended 0.43.4 zip version and unzip it. I usually put it on my desktop. Then you can install your new build into it: make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install If that works, then you're ready to try to build against Jack. Replace pd-extended/src/makefile.mingw with makefile.mingw that is attached to this email, and try this: cd pd-extended/src make -f makefile.mingw clean make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install .hc On 01/16/2013 02:07 PM, Esteban Viveros wrote: Wow If I had the knowledge to do.. (!) *.* But I can try... I need documentation to learn.. Where can I begin? 2013/1/16 Hans-Christoph Steiner h...@at.or.at I agree, it should be included. Why don't you try to build it? Or maybe if patco has some time, he could take a look. Its much too late to include it in 0.43.4, but once its working, its easy to include in nightly builds of 0.44. .hc On 01/16/2013 12:58 PM, Esteban Viveros wrote: Hello list, Excuse the hassle... But I think this very important .. The windows version of pd-extended 0.43 don't have support to Jack.. It would be great can connect my new pd extended release to ableton live to play a little.. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list
Re: [PD] Jack support on Windows
I need to run git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git in the same folder of the libraries built? (~/pure-data/sources) In my case I need to do this with your script: (?) mkdir ~/auto-build cd ~/auto-buildhttps://pure-data.svn.sourceforge.net/svnroot/pure-data/branches/pd-extended/0.43 pd-extended ~/auto-build/pd-extended/scripts/auto-build/pd-extended-auto-builder.sh 2013/1/17 Hans-Christoph Steiner h...@at.or.at Yeah, it looks like the binary installer for jack is all you need. No problem if you just built all the libraries in Building Library Dependencies For Windows From SVN '/Sources'. I was just trying to save you that effort, since its not needed for what you want to do. But now you are setup to build all of Pd-extended and perhaps even readanysf~ too :-D You will definitely need to download the Pd-extended source. .hc On 01/17/2013 03:37 PM, Esteban Viveros wrote: I have one more question... When you say to install Jack, you say the binary software or I need to find a source code of Jack audio? 2013/1/17 Esteban Viveros emvive...@gmail.com Ops... Already done... :/ Now only remains download pd source.. Did I that too wrong? I'm thinking to download the pd source and then run your script... Can I continue? 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't need that stuff at all for what you are doing, skip that step. That's only for building things like Gem. .hc On 01/16/2013 07:15 PM, Esteban Viveros wrote: Ok... Now I need to know where is pure-data directory..? It's needed to Building Library Dependencies For Windows From SVN '/Sources' 2013/1/16 Hans-Christoph Steiner h...@at.or.at I updated the makefile.mingw a bit, I forgot to add something before. Its attached. .hc On 01/16/2013 06:44 PM, Esteban Viveros wrote: gcc.exe ,GCC. 4.6.2 2013/1/16 Hans-Christoph Steiner h...@at.or.at On 01/16/2013 06:28 PM, Esteban Viveros wrote: HC, I have two question at time.. First, I need to add Cygwin to system path? If yes, I run SETX path c:\cygwin;c:\cygwin\bin;%path% in Cygwin Terminal? This is probably optional but cygwin is useful. You do it from the System control panel: http://www.computerhope.com/issues/ch000549.htm If you install TortoiseSVN, I don't think you need cygwin at all (watch out for download links in the big add in that page): http://tortoisesvn.net/downloads.html Two, In session: Copying Libgmp-10Dll for Cc1.Exe I don't have /mingw/libexec/gcc/mingw32/4.7.2/ but I have /mingw/libexec/gcc/mingw32/4.6.2 I need to create the 4.7.2 directory or copy the dll's to 4.6.2? Copy the dlls to the existing folder, don't create a new one. You can tell which version of gcc you have by doing: gcc --version My guess is that you have 4.6.2, which should work fine. .hc 2013/1/16 Hans-Christoph Steiner h...@at.or.at Start by installing Jack on your windows machine and setting up a Pd build environment: http://puredata.info/docs/developer/WindowsMinGW You can skip the Building library dependencies for Windows from SVN '/sources' section for now. Then in the MSYS MinGW shell, do this: git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd pd-extended/src make -f makefile.mingw That should give you a regular Pd build. Then download a Pd-extended 0.43.4 zip version and unzip it. I usually put it on my desktop. Then you can install your new build into it: make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install If that works, then you're ready to try to build against Jack. Replace pd-extended/src/makefile.mingw with makefile.mingw that is attached to this email, and try this: cd pd-extended/src make -f makefile.mingw clean make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install .hc On 01/16/2013 02:07 PM, Esteban Viveros wrote: Wow If I had the knowledge to do.. (!) *.* But I can try... I need documentation to learn.. Where can I begin? 2013/1/16 Hans-Christoph Steiner h...@at.or.at I agree, it should be included. Why don't you try to build it? Or maybe if patco has some time, he could take a look. Its much too late to include it in 0.43.4, but once its working, its easy to include in nightly builds of 0.44. .hc On 01/16/2013 12:58 PM, Esteban Viveros wrote: Hello list, Excuse the hassle... But I think this very important .. The windows version of pd-extended 0.43 don't have support to Jack.. It would be great can connect my new pd extended release to ableton live to play a little.. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and
Re: [PD] Jack support on Windows
(let's keep the list CC'ed so that others can follow this) You can run 'git clone ...' wherever you want to keep the pd-extended source, it doesn't really matter where. ~/pure-data is probably a good place. .hc On 01/17/2013 05:35 PM, Esteban Viveros wrote: I need to run git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git in the same folder of the libraries built? (~/pure-data/sources) 2013/1/17 Hans-Christoph Steiner h...@at.or.at Yeah, it looks like the binary installer for jack is all you need. No problem if you just built all the libraries in Building Library Dependencies For Windows From SVN '/Sources'. I was just trying to save you that effort, since its not needed for what you want to do. But now you are setup to build all of Pd-extended and perhaps even readanysf~ too :-D You will definitely need to download the Pd-extended source. .hc On 01/17/2013 03:37 PM, Esteban Viveros wrote: I have one more question... When you say to install Jack, you say the binary software or I need to find a source code of Jack audio? 2013/1/17 Esteban Viveros emvive...@gmail.com Ops... Already done... :/ Now only remains download pd source.. Did I that too wrong? I'm thinking to download the pd source and then run your script... Can I continue? 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't need that stuff at all for what you are doing, skip that step. That's only for building things like Gem. .hc On 01/16/2013 07:15 PM, Esteban Viveros wrote: Ok... Now I need to know where is pure-data directory..? It's needed to Building Library Dependencies For Windows From SVN '/Sources' 2013/1/16 Hans-Christoph Steiner h...@at.or.at I updated the makefile.mingw a bit, I forgot to add something before. Its attached. .hc On 01/16/2013 06:44 PM, Esteban Viveros wrote: gcc.exe ,GCC. 4.6.2 2013/1/16 Hans-Christoph Steiner h...@at.or.at On 01/16/2013 06:28 PM, Esteban Viveros wrote: HC, I have two question at time.. First, I need to add Cygwin to system path? If yes, I run SETX path c:\cygwin;c:\cygwin\bin;%path% in Cygwin Terminal? This is probably optional but cygwin is useful. You do it from the System control panel: http://www.computerhope.com/issues/ch000549.htm If you install TortoiseSVN, I don't think you need cygwin at all (watch out for download links in the big add in that page): http://tortoisesvn.net/downloads.html Two, In session: Copying Libgmp-10Dll for Cc1.Exe I don't have /mingw/libexec/gcc/mingw32/4.7.2/ but I have /mingw/libexec/gcc/mingw32/4.6.2 I need to create the 4.7.2 directory or copy the dll's to 4.6.2? Copy the dlls to the existing folder, don't create a new one. You can tell which version of gcc you have by doing: gcc --version My guess is that you have 4.6.2, which should work fine. .hc 2013/1/16 Hans-Christoph Steiner h...@at.or.at Start by installing Jack on your windows machine and setting up a Pd build environment: http://puredata.info/docs/developer/WindowsMinGW You can skip the Building library dependencies for Windows from SVN '/sources' section for now. Then in the MSYS MinGW shell, do this: git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd pd-extended/src make -f makefile.mingw That should give you a regular Pd build. Then download a Pd-extended 0.43.4 zip version and unzip it. I usually put it on my desktop. Then you can install your new build into it: make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install If that works, then you're ready to try to build against Jack. Replace pd-extended/src/makefile.mingw with makefile.mingw that is attached to this email, and try this: cd pd-extended/src make -f makefile.mingw clean make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install .hc On 01/16/2013 02:07 PM, Esteban Viveros wrote: Wow If I had the knowledge to do.. (!) *.* But I can try... I need documentation to learn.. Where can I begin? 2013/1/16 Hans-Christoph Steiner h...@at.or.at I agree, it should be included. Why don't you try to build it? Or maybe if patco has some time, he could take a look. Its much too late to include it in 0.43.4, but once its working, its easy to include in nightly builds of 0.44. .hc On 01/16/2013 12:58 PM, Esteban Viveros wrote: Hello list, Excuse the hassle... But I think this very important .. The windows version of pd-extended 0.43 don't have support to Jack.. It would be great can connect my new pd extended release to ableton live to play a little.. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and
Re: [PD] Jack support on Windows
You don't want the auto-build script for this. Its more trouble than its worth. Do this instead: * download the zip version: http://autobuild.puredata.info/auto-build/2013-01-17/Pd-0.43.4-extended-20130117-windowsxp-i386.zip * unzip it into ~/pure-data * run these commands: cd ~/pure-data git clone git://pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd ~/pure-data/pd-extended * now copy attached file into ~/pure-data/pd-extended/src/ * now run these commands: make -f makefile.mingw make -f makefile.mingw DESTDIR=~/pure-data/Pd-0.43.4-extended-20130117 prefix= install (make sure the last line is all on one line) Now you should be able to go to ~/pure-data/Pd-0.43.4-extended-20130117/bin and run pd.exe and have a working Pd with jack (fingers crossed) .hc On 01/17/2013 05:40 PM, Esteban Viveros wrote: I need to run git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git in the same folder of the libraries built? (~/pure-data/sources) In my case I need to do this with your script: (?) mkdir ~/auto-build cd ~/auto-buildhttps://pure-data.svn.sourceforge.net/svnroot/pure-data/branches/pd-extended/0.43 pd-extended ~/auto-build/pd-extended/scripts/auto-build/pd-extended-auto-builder.sh 2013/1/17 Hans-Christoph Steiner h...@at.or.at Yeah, it looks like the binary installer for jack is all you need. No problem if you just built all the libraries in Building Library Dependencies For Windows From SVN '/Sources'. I was just trying to save you that effort, since its not needed for what you want to do. But now you are setup to build all of Pd-extended and perhaps even readanysf~ too :-D You will definitely need to download the Pd-extended source. .hc On 01/17/2013 03:37 PM, Esteban Viveros wrote: I have one more question... When you say to install Jack, you say the binary software or I need to find a source code of Jack audio? 2013/1/17 Esteban Viveros emvive...@gmail.com Ops... Already done... :/ Now only remains download pd source.. Did I that too wrong? I'm thinking to download the pd source and then run your script... Can I continue? 2013/1/17 Hans-Christoph Steiner h...@at.or.at You don't need that stuff at all for what you are doing, skip that step. That's only for building things like Gem. .hc On 01/16/2013 07:15 PM, Esteban Viveros wrote: Ok... Now I need to know where is pure-data directory..? It's needed to Building Library Dependencies For Windows From SVN '/Sources' 2013/1/16 Hans-Christoph Steiner h...@at.or.at I updated the makefile.mingw a bit, I forgot to add something before. Its attached. .hc On 01/16/2013 06:44 PM, Esteban Viveros wrote: gcc.exe ,GCC. 4.6.2 2013/1/16 Hans-Christoph Steiner h...@at.or.at On 01/16/2013 06:28 PM, Esteban Viveros wrote: HC, I have two question at time.. First, I need to add Cygwin to system path? If yes, I run SETX path c:\cygwin;c:\cygwin\bin;%path% in Cygwin Terminal? This is probably optional but cygwin is useful. You do it from the System control panel: http://www.computerhope.com/issues/ch000549.htm If you install TortoiseSVN, I don't think you need cygwin at all (watch out for download links in the big add in that page): http://tortoisesvn.net/downloads.html Two, In session: Copying Libgmp-10Dll for Cc1.Exe I don't have /mingw/libexec/gcc/mingw32/4.7.2/ but I have /mingw/libexec/gcc/mingw32/4.6.2 I need to create the 4.7.2 directory or copy the dll's to 4.6.2? Copy the dlls to the existing folder, don't create a new one. You can tell which version of gcc you have by doing: gcc --version My guess is that you have 4.6.2, which should work fine. .hc 2013/1/16 Hans-Christoph Steiner h...@at.or.at Start by installing Jack on your windows machine and setting up a Pd build environment: http://puredata.info/docs/developer/WindowsMinGW You can skip the Building library dependencies for Windows from SVN '/sources' section for now. Then in the MSYS MinGW shell, do this: git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd pd-extended/src make -f makefile.mingw That should give you a regular Pd build. Then download a Pd-extended 0.43.4 zip version and unzip it. I usually put it on my desktop. Then you can install your new build into it: make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install If that works, then you're ready to try to build against Jack. Replace pd-extended/src/makefile.mingw with makefile.mingw that is attached to this email, and try this: cd pd-extended/src make -f makefile.mingw clean make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install .hc On 01/16/2013 02:07 PM, Esteban Viveros wrote: Wow If I had the knowledge to do.. (!) *.* But I can try... I need documentation to learn.. Where can I begin?
Re: [PD] Jack support on Windows
Wow If I had the knowledge to do.. (!) *.* But I can try... I need documentation to learn.. Where can I begin? 2013/1/16 Hans-Christoph Steiner h...@at.or.at I agree, it should be included. Why don't you try to build it? Or maybe if patco has some time, he could take a look. Its much too late to include it in 0.43.4, but once its working, its easy to include in nightly builds of 0.44. .hc On 01/16/2013 12:58 PM, Esteban Viveros wrote: Hello list, Excuse the hassle... But I think this very important .. The windows version of pd-extended 0.43 don't have support to Jack.. It would be great can connect my new pd extended release to ableton live to play a little.. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Esteban Viveros (27) 8815 7170 (27) 3066 0359 (11) 95761 4125 (11) 2738 7868 www.bandpage.com/estebanviveros http://soundcloud.com/estebanviveros https://www.facebook.com/estebanviveros.art http://www.papodecompositor-es.blogspot.com.br/ http://expurgacao.art.br/ ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
Start by installing Jack on your windows machine and setting up a Pd build environment: http://puredata.info/docs/developer/WindowsMinGW You can skip the Building library dependencies for Windows from SVN '/sources' section for now. Then in the MSYS MinGW shell, do this: git clone git://pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd pd-extended/src make -f makefile.mingw That should give you a regular Pd build. Then download a Pd-extended 0.43.4 zip version and unzip it. I usually put it on my desktop. Then you can install your new build into it: make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install If that works, then you're ready to try to build against Jack. Replace pd-extended/src/makefile.mingw with makefile.mingw that is attached to this email, and try this: cd pd-extended/src make -f makefile.mingw clean make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install .hc On 01/16/2013 02:07 PM, Esteban Viveros wrote: Wow If I had the knowledge to do.. (!) *.* But I can try... I need documentation to learn.. Where can I begin? 2013/1/16 Hans-Christoph Steiner h...@at.or.at I agree, it should be included. Why don't you try to build it? Or maybe if patco has some time, he could take a look. Its much too late to include it in 0.43.4, but once its working, its easy to include in nightly builds of 0.44. .hc On 01/16/2013 12:58 PM, Esteban Viveros wrote: Hello list, Excuse the hassle... But I think this very important .. The windows version of pd-extended 0.43 don't have support to Jack.. It would be great can connect my new pd extended release to ableton live to play a little.. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list # how Miller builds Pd on Windows: # http://lists.puredata.info/pipermail/pd-dev/2004-10/002981.html CC = gcc CXX = g++ cvs_root_dir = ../.. pd_src = $(cvs_root_dir)/pd DLL_DIR = $(pd_src)/src BIN_DIR = ../bin VPATH = $(pd_src)/src prefix = /usr/local/pd exec_prefix = $(prefix) includedir = $(prefix)/include libdir = $(exec_prefix)/lib mandir = $(prefix)/man bindir = $(exec_prefix)/bin GFLAGS = -DINSTALL_PREFIX=\$(prefix)\ # varibles to match packages/Makefile.buildlayout so that they can be easily # overridden when building Pd-extended builds. h...@at.or.at libpddir = $(prefix) pddocdir = $(libpddir)/doc libpdbindir = $(libpddir)/bin PDEXEC = pd.exe PDDLL = pd.dll DLLWRAP= dllwrap MORECFLAGS = -O3 -funroll-loops -fomit-frame-pointer PADIR = $(pd_src)/portaudio ASIODIR = $(pd_src)/asio/ASIOSDK2 ASIOINC = -I$(ASIODIR)/common -I$(ASIODIR)/host -I$(ASIODIR)/host/pc INCPA = -I$(PADIR) -I$(PADIR)/include -I$(PADIR)/src/common -I$(PADIR)/src/os/win $(ASIOINC) INCLUDE = -I$(pd_src)/src -I/c/Progra~1/jack/includes -I/c/Progra~2/jack/includes -I/c/Progra~3/jack/includes GINCLUDE = -I/usr/local/include $(INCLUDE) LDFLAGS = -L/c/Progra~1/jack/lib -L/c/Progra~2/jack/lib -L/c/Progra~3/jack/lib LIBS = -lm -lwsock32 -lwinmm -lole32 -lpthreadGC2 -ljack OPT_CFLAGS = WARN_CFLAGS = -Wall -W -Wstrict-prototypes -Wno-unused \ -Wno-unused-parameter -Wno-parentheses -Wno-switch # Some old code in asio/ASIOSDK2/common/combase.h needs to be ignored, # we do this by setting the WINVER macro to min Windows XP aka 5.1. # Also, for SetDllDirectory() s_loader.c, we need a minium of Windows # XP SP1. WINVER isnt' fine-grained enough for that, so we use the # next minor version of Windows, 5.2. ARCH_CFLAGS = -DPD -DPD_INTERNAL -DPA_USE_ASIO -DPA_USE_WMME -DWINVER=0x0502 \ -DUSEAPI_MMIO -DUSEAPI_PORTAUDIO -mms-bitfields -DWISHAPP='wish85.exe' CFLAGS += $(ARCH_CFLAGS) $(WARN_CFLAGS) $(OPT_CFLAGS) $(MORECFLAGS) STRIP = strip --strip-unneeded -R .note -R .comment # the sources PASRC = s_audio_pa.c s_audio_paring.c \ s_audio_mmio.c s_midi_mmio.c \ $(PADIR)/src/common/pa_stream.c \ $(PADIR)/src/common/pa_trace.c \ $(PADIR)/src/common/pa_process.c \ $(PADIR)/src/common/pa_front.c \ $(PADIR)/src/common/pa_dither.c \ $(PADIR)/src/common/pa_cpuload.c \ $(PADIR)/src/common/pa_converters.c \ $(PADIR)/src/common/pa_allocation.c \ $(PADIR)/src/common/pa_ringbuffer.c \ $(PADIR)/src/os/win/pa_win_hostapis.c \ $(PADIR)/src/os/win/pa_win_util.c \ $(PADIR)/src/os/win/pa_win_waveformat.c \ $(PADIR)/src/os/win/pa_win_coinitialize.c \ $(PADIR)/src/hostapi/wmme/pa_win_wmme.c ASIOSRC =
Re: [PD] Jack support on Windows
On 01/16/2013 06:28 PM, Esteban Viveros wrote: HC, I have two question at time.. First, I need to add Cygwin to system path? If yes, I run SETX path c:\cygwin;c:\cygwin\bin;%path% in Cygwin Terminal? This is probably optional but cygwin is useful. You do it from the System control panel: http://www.computerhope.com/issues/ch000549.htm If you install TortoiseSVN, I don't think you need cygwin at all (watch out for download links in the big add in that page): http://tortoisesvn.net/downloads.html Two, In session: Copying Libgmp-10Dll for Cc1.Exe I don't have /mingw/libexec/gcc/mingw32/4.7.2/ but I have /mingw/libexec/gcc/mingw32/4.6.2 I need to create the 4.7.2 directory or copy the dll's to 4.6.2? Copy the dlls to the existing folder, don't create a new one. You can tell which version of gcc you have by doing: gcc --version My guess is that you have 4.6.2, which should work fine. .hc 2013/1/16 Hans-Christoph Steiner h...@at.or.at Start by installing Jack on your windows machine and setting up a Pd build environment: http://puredata.info/docs/developer/WindowsMinGW You can skip the Building library dependencies for Windows from SVN '/sources' section for now. Then in the MSYS MinGW shell, do this: git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd pd-extended/src make -f makefile.mingw That should give you a regular Pd build. Then download a Pd-extended 0.43.4 zip version and unzip it. I usually put it on my desktop. Then you can install your new build into it: make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install If that works, then you're ready to try to build against Jack. Replace pd-extended/src/makefile.mingw with makefile.mingw that is attached to this email, and try this: cd pd-extended/src make -f makefile.mingw clean make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install .hc On 01/16/2013 02:07 PM, Esteban Viveros wrote: Wow If I had the knowledge to do.. (!) *.* But I can try... I need documentation to learn.. Where can I begin? 2013/1/16 Hans-Christoph Steiner h...@at.or.at I agree, it should be included. Why don't you try to build it? Or maybe if patco has some time, he could take a look. Its much too late to include it in 0.43.4, but once its working, its easy to include in nightly builds of 0.44. .hc On 01/16/2013 12:58 PM, Esteban Viveros wrote: Hello list, Excuse the hassle... But I think this very important .. The windows version of pd-extended 0.43 don't have support to Jack.. It would be great can connect my new pd extended release to ableton live to play a little.. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list signature.asc Description: OpenPGP digital signature ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
That should work fine. .hc On 01/16/2013 06:44 PM, Esteban Viveros wrote: gcc.exe ,GCC. 4.6.2 2013/1/16 Hans-Christoph Steiner h...@at.or.at On 01/16/2013 06:28 PM, Esteban Viveros wrote: HC, I have two question at time.. First, I need to add Cygwin to system path? If yes, I run SETX path c:\cygwin;c:\cygwin\bin;%path% in Cygwin Terminal? This is probably optional but cygwin is useful. You do it from the System control panel: http://www.computerhope.com/issues/ch000549.htm If you install TortoiseSVN, I don't think you need cygwin at all (watch out for download links in the big add in that page): http://tortoisesvn.net/downloads.html Two, In session: Copying Libgmp-10Dll for Cc1.Exe I don't have /mingw/libexec/gcc/mingw32/4.7.2/ but I have /mingw/libexec/gcc/mingw32/4.6.2 I need to create the 4.7.2 directory or copy the dll's to 4.6.2? Copy the dlls to the existing folder, don't create a new one. You can tell which version of gcc you have by doing: gcc --version My guess is that you have 4.6.2, which should work fine. .hc 2013/1/16 Hans-Christoph Steiner h...@at.or.at Start by installing Jack on your windows machine and setting up a Pd build environment: http://puredata.info/docs/developer/WindowsMinGW You can skip the Building library dependencies for Windows from SVN '/sources' section for now. Then in the MSYS MinGW shell, do this: git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd pd-extended/src make -f makefile.mingw That should give you a regular Pd build. Then download a Pd-extended 0.43.4 zip version and unzip it. I usually put it on my desktop. Then you can install your new build into it: make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install If that works, then you're ready to try to build against Jack. Replace pd-extended/src/makefile.mingw with makefile.mingw that is attached to this email, and try this: cd pd-extended/src make -f makefile.mingw clean make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install .hc On 01/16/2013 02:07 PM, Esteban Viveros wrote: Wow If I had the knowledge to do.. (!) *.* But I can try... I need documentation to learn.. Where can I begin? 2013/1/16 Hans-Christoph Steiner h...@at.or.at I agree, it should be included. Why don't you try to build it? Or maybe if patco has some time, he could take a look. Its much too late to include it in 0.43.4, but once its working, its easy to include in nightly builds of 0.44. .hc On 01/16/2013 12:58 PM, Esteban Viveros wrote: Hello list, Excuse the hassle... But I think this very important .. The windows version of pd-extended 0.43 don't have support to Jack.. It would be great can connect my new pd extended release to ableton live to play a little.. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] Jack support on Windows
I updated the makefile.mingw a bit, I forgot to add something before. Its attached. .hc On 01/16/2013 06:44 PM, Esteban Viveros wrote: gcc.exe ,GCC. 4.6.2 2013/1/16 Hans-Christoph Steiner h...@at.or.at On 01/16/2013 06:28 PM, Esteban Viveros wrote: HC, I have two question at time.. First, I need to add Cygwin to system path? If yes, I run SETX path c:\cygwin;c:\cygwin\bin;%path% in Cygwin Terminal? This is probably optional but cygwin is useful. You do it from the System control panel: http://www.computerhope.com/issues/ch000549.htm If you install TortoiseSVN, I don't think you need cygwin at all (watch out for download links in the big add in that page): http://tortoisesvn.net/downloads.html Two, In session: Copying Libgmp-10Dll for Cc1.Exe I don't have /mingw/libexec/gcc/mingw32/4.7.2/ but I have /mingw/libexec/gcc/mingw32/4.6.2 I need to create the 4.7.2 directory or copy the dll's to 4.6.2? Copy the dlls to the existing folder, don't create a new one. You can tell which version of gcc you have by doing: gcc --version My guess is that you have 4.6.2, which should work fine. .hc 2013/1/16 Hans-Christoph Steiner h...@at.or.at Start by installing Jack on your windows machine and setting up a Pd build environment: http://puredata.info/docs/developer/WindowsMinGW You can skip the Building library dependencies for Windows from SVN '/sources' section for now. Then in the MSYS MinGW shell, do this: git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd pd-extended/src make -f makefile.mingw That should give you a regular Pd build. Then download a Pd-extended 0.43.4 zip version and unzip it. I usually put it on my desktop. Then you can install your new build into it: make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install If that works, then you're ready to try to build against Jack. Replace pd-extended/src/makefile.mingw with makefile.mingw that is attached to this email, and try this: cd pd-extended/src make -f makefile.mingw clean make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install .hc On 01/16/2013 02:07 PM, Esteban Viveros wrote: Wow If I had the knowledge to do.. (!) *.* But I can try... I need documentation to learn.. Where can I begin? 2013/1/16 Hans-Christoph Steiner h...@at.or.at I agree, it should be included. Why don't you try to build it? Or maybe if patco has some time, he could take a look. Its much too late to include it in 0.43.4, but once its working, its easy to include in nightly builds of 0.44. .hc On 01/16/2013 12:58 PM, Esteban Viveros wrote: Hello list, Excuse the hassle... But I think this very important .. The windows version of pd-extended 0.43 don't have support to Jack.. It would be great can connect my new pd extended release to ableton live to play a little.. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list # how Miller builds Pd on Windows: # http://lists.puredata.info/pipermail/pd-dev/2004-10/002981.html CC = gcc CXX = g++ cvs_root_dir = ../.. pd_src = $(cvs_root_dir)/pd DLL_DIR = $(pd_src)/src BIN_DIR = ../bin VPATH = $(pd_src)/src prefix = /usr/local/pd exec_prefix = $(prefix) includedir = $(prefix)/include libdir = $(exec_prefix)/lib mandir = $(prefix)/man bindir = $(exec_prefix)/bin GFLAGS = -DINSTALL_PREFIX=\$(prefix)\ # varibles to match packages/Makefile.buildlayout so that they can be easily # overridden when building Pd-extended builds. h...@at.or.at libpddir = $(prefix) pddocdir = $(libpddir)/doc libpdbindir = $(libpddir)/bin PDEXEC = pd.exe PDDLL = pd.dll DLLWRAP= dllwrap MORECFLAGS = -O3 -funroll-loops -fomit-frame-pointer PADIR = $(pd_src)/portaudio ASIODIR = $(pd_src)/asio/ASIOSDK2 ASIOINC = -I$(ASIODIR)/common -I$(ASIODIR)/host -I$(ASIODIR)/host/pc INCPA = -I$(PADIR) -I$(PADIR)/include -I$(PADIR)/src/common -I$(PADIR)/src/os/win $(ASIOINC) INCLUDE = -I$(pd_src)/src -I$(PROGRAMFILES)/Jack/includes -I/c/Progra~1/jack/includes -I/c/Progra~2/jack/includes -I/c/Progra~3/jack/includes GINCLUDE = -I/usr/local/include $(INCLUDE) LDFLAGS =
Re: [PD] Jack support on Windows
You don't need that stuff at all for what you are doing, skip that step. That's only for building things like Gem. .hc On 01/16/2013 07:15 PM, Esteban Viveros wrote: Ok... Now I need to know where is pure-data directory..? It's needed to Building Library Dependencies For Windows From SVN '/Sources' 2013/1/16 Hans-Christoph Steiner h...@at.or.at I updated the makefile.mingw a bit, I forgot to add something before. Its attached. .hc On 01/16/2013 06:44 PM, Esteban Viveros wrote: gcc.exe ,GCC. 4.6.2 2013/1/16 Hans-Christoph Steiner h...@at.or.at On 01/16/2013 06:28 PM, Esteban Viveros wrote: HC, I have two question at time.. First, I need to add Cygwin to system path? If yes, I run SETX path c:\cygwin;c:\cygwin\bin;%path% in Cygwin Terminal? This is probably optional but cygwin is useful. You do it from the System control panel: http://www.computerhope.com/issues/ch000549.htm If you install TortoiseSVN, I don't think you need cygwin at all (watch out for download links in the big add in that page): http://tortoisesvn.net/downloads.html Two, In session: Copying Libgmp-10Dll for Cc1.Exe I don't have /mingw/libexec/gcc/mingw32/4.7.2/ but I have /mingw/libexec/gcc/mingw32/4.6.2 I need to create the 4.7.2 directory or copy the dll's to 4.6.2? Copy the dlls to the existing folder, don't create a new one. You can tell which version of gcc you have by doing: gcc --version My guess is that you have 4.6.2, which should work fine. .hc 2013/1/16 Hans-Christoph Steiner h...@at.or.at Start by installing Jack on your windows machine and setting up a Pd build environment: http://puredata.info/docs/developer/WindowsMinGW You can skip the Building library dependencies for Windows from SVN '/sources' section for now. Then in the MSYS MinGW shell, do this: git clone git:// pure-data.git.sourceforge.net/gitroot/pure-data/pd-extended.git cd pd-extended/src make -f makefile.mingw That should give you a regular Pd build. Then download a Pd-extended 0.43.4 zip version and unzip it. I usually put it on my desktop. Then you can install your new build into it: make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install If that works, then you're ready to try to build against Jack. Replace pd-extended/src/makefile.mingw with makefile.mingw that is attached to this email, and try this: cd pd-extended/src make -f makefile.mingw clean make -f makefile.mingw DESTDIR=$USERPROFILE/Desktop/Pd-0.43.4-extended-20130115 prefix= install .hc On 01/16/2013 02:07 PM, Esteban Viveros wrote: Wow If I had the knowledge to do.. (!) *.* But I can try... I need documentation to learn.. Where can I begin? 2013/1/16 Hans-Christoph Steiner h...@at.or.at I agree, it should be included. Why don't you try to build it? Or maybe if patco has some time, he could take a look. Its much too late to include it in 0.43.4, but once its working, its easy to include in nightly builds of 0.44. .hc On 01/16/2013 12:58 PM, Esteban Viveros wrote: Hello list, Excuse the hassle... But I think this very important .. The windows version of pd-extended 0.43 don't have support to Jack.. It would be great can connect my new pd extended release to ableton live to play a little.. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] ubuntu linx: a couple of pd+jack errors
error: JACK error: cannot lock down memory for RT thread (Cannot allocate memory) this error seems to indicate that you are lacking real time priviliges (what's the content of your /etc/security/limits.d/audio.conf?) I can reply later, I can't access the computer where this happened. This one appears when I load a complex patch. It also crashes Pd: tk scaling is 1.3187954309449634 Speicherzugriffsfehler pd_gui: pd process exited you could try to produce a backtrace [1] Funnily, Pd+Jack works with the same patch - as long as I start Pd with alsa, and after loading the patch change the audio to jack. which would indicate that your patch takes too long to load and jack kicks out Pd the patch does need some time to load, it has to load in a couple of long samples (up to 5'), load text files with markers that divide the arrays and generate data structures to display that division... can take some minutes in XP (will take less on ubuntu, of course). ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] ubuntu linx: a couple of pd+jack errors
ah, so it is really a Pd bug, and not some bad jack oder system settings? João Try a nightly build, I think there are some jack fixes. .hc On Feb 3, 2012, at 5:04 PM, João Pais wrote: Hi list, I was trying Pd-Ext (last stable version) with jack on ubuntu linx, and got a couple of mistakes. Can someone elucidate on what they are? this one appears when I try to start Pd -nogui: error: JACK error: cannot lock down memory for RT thread (Cannot allocate memory) This one appears when I load a complex patch. It also crashes Pd: tk scaling is 1.3187954309449634 Speicherzugriffsfehler pd_gui: pd process exited Funnily, Pd+Jack works with the same patch - as long as I start Pd with alsa, and after loading the patch change the audio to jack. Thanks as usual, João ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list 'You people have such restrictive dress for women,’ she said, hobbling away in three inch heels and panty hose to finish out another pink-collar temp pool day. - “Hijab Scene #2, by Mohja Kahf -- Friedenstr. 58 10249 Berlin (Deutschland) Tel +49 30 42020091 | Mob +49 162 6843570 Studio +49 30 69509190 jmmmp...@googlemail.com | skype: jmmmpjmmmp ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] ubuntu linx: a couple of pd+jack errors
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 2012-02-06 13:41, João Pais wrote: ah, so it is really a Pd bug, and not some bad jack oder system settings? dunno, but try a nightly build, i think there are some jack fixes does not necessarily mean this is a known issue that was fixed only recently best would be to try and report (un)success... error: JACK error: cannot lock down memory for RT thread (Cannot allocate memory) this error seems to indicate that you are lacking real time priviliges (what's the content of your /etc/security/limits.d/audio.conf?) This one appears when I load a complex patch. It also crashes Pd: tk scaling is 1.3187954309449634 Speicherzugriffsfehler pd_gui: pd process exited you could try to produce a backtrace [1] Funnily, Pd+Jack works with the same patch - as long as I start Pd with alsa, and after loading the patch change the audio to jack. which would indicate that your patch takes too long to load and jack kicks out Pd fgmasdr IOhannes [1] for a start see the mailinglist archives and/or http://wiki.debian.org/HowToGetABacktrace#Running_gdb -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk8vzoQACgkQkX2Xpv6ydvRv8wCeP/nDiCb/IJ/uppZx2xftV0eq cC4AoK3pGPvjjW7aWf4v9S04n7h9+zCg =UkMq -END PGP SIGNATURE- smime.p7s Description: S/MIME Cryptographic Signature ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] ubuntu linx: a couple of pd+jack errors
Try a nightly build, I think there are some jack fixes. .hc On Feb 3, 2012, at 5:04 PM, João Pais wrote: Hi list, I was trying Pd-Ext (last stable version) with jack on ubuntu linx, and got a couple of mistakes. Can someone elucidate on what they are? this one appears when I try to start Pd -nogui: error: JACK error: cannot lock down memory for RT thread (Cannot allocate memory) This one appears when I load a complex patch. It also crashes Pd: tk scaling is 1.3187954309449634 Speicherzugriffsfehler pd_gui: pd process exited Funnily, Pd+Jack works with the same patch - as long as I start Pd with alsa, and after loading the patch change the audio to jack. Thanks as usual, João ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list 'You people have such restrictive dress for women,’ she said, hobbling away in three inch heels and panty hose to finish out another pink-collar temp pool day. - “Hijab Scene #2, by Mohja Kahf ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] ubuntu linx: a couple of pd+jack errors
On Fri, 2012-02-03 at 23:04 +0100, João Pais wrote: error: JACK error: cannot lock down memory for RT thread (Cannot allocate memory) This means you don't have realtime privilege and cannot start jack in realtime mode. If you chose yes to have realtime capability while installing jack, you will have installed a file /etc/security/limits.d/audio.conf, but to make use of that file you need to be a part of audio group. Group changes take effect after logging out/in. ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] JACK the -rt flag
Tyler Leavitt wrote: Hello, This may be a silly question, but when using pd with realtime enabled in JACK is it necessary to start pd with the -rt flag? Well.. not strictly necessary but it will (at least in my experience) improve performance, especially for heavy patches. Lorenzo. Thanks, Tyler ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
[PD] JACK the -rt flag
Hello, This may be a silly question, but when using pd with realtime enabled in JACK is it necessary to start pd with the -rt flag? Thanks, Tyler ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list
Re: [PD] jack audio pilot
are you using a specific audio card? did you checked jack audio settings? (jackpilot - preferences) -- Dom Le 14 mars 2011 à 23:30, Coralie Diatkine a écrit : Hi, and thanks for answering. I solved part of the problem : reinstalled pd-ext. last version and threw the prefs away. I have jack 0.87 too. Pd is ok with both pilots. The thing is I still can't hear anything from the line in, be it when I do the audio test, or when I try to record a file. The vus don't respond either, they always show a low level... Here is a screen capture. I also tried with an acd~1 2 3 4 connecting outputs # 3 4. Coralie 2011/3/14 Dominique Fober dfo...@gmail.com Hi, I'm also using Pd on Mac OS 10.6.6 and it works correctly with jack. I'm using the latest jack os X version (0.87) and I guess you too. My pd version is 0.41.4-extended. Could you check your versions and send more details concerning the problem (a crash report could help, if any). -- Dominique Le 14 mars 2011 à 20:14, Coralie Diatkine a écrit : Hi everyone I'm a beginner with puredata, and I'm trying to record sounds from other applications via the line input. I'm on os X.6.6, and I use pd-extended. I've downloaded jack os X, and the configuration seems ok to me. I've started jack pilot and launched pd, and every time I try to select an audio pilot (jack or audio port), or when I try to trigger the audio test, pd quits. Does someone have an explanation ? Thanks Coralie -- Coralie Diatkine 96 cours Victor Hugo 33000 Bordeaux 06 35 58 68 27 ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Coralie Diatkine 96 cours Victor Hugo 33000 Bordeaux 06 35 58 68 27 Capture d’écran 2011-03-13 à 18.44.49.png ___ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list