Re: update on the new printer
Windex is a brand name glass cleaner made of water, detergent, amino alcohol, ammonia & fragrance. http://www.whatsinsidescjohnson.com/us/en/brands/windex/windex-original-glass-cleaner On 3/7/2016 1:50 PM, Jostein Øksne wrote: Not familiar with the brand, but isn't it just some kind of organic solvent? Jostein Den 7. mars 2016 15.58.41 CET, skrev ann sanfedele: Glad to hear that, Jostein I'm off to B to buy two more cartridges that I should have gotten yesterday... don't ask.. I used the Rite-aidverson of Windex on a paper towel to wipe the spikes last night not realizing it wasn't Official Windex that I was loaned but the same chemistry. Crossing fingers I didn't cause more mischief - can't know until I replace the actually dead light light black. ann On 3/7/2016 4:10 AM, Jostein Øksne wrote: My Epson stylus photo 2100 just keeps on working. It suffered one and a half years sitting in an uninsulated barn, collecting dust and mouse droppings, and still came through after four rounds through the cleaning process. I believe I'm stuck with it for good... Or at least as long as there's ink for it. Jostein Den 6. mars 2016 23.35.29 CET, skrev ann sanfedele : according to more than one of the guys in those you-tubes I've ben looking at too much running of th head cleaning thing isnt good... but with my R220 occasionally I had to run it two or three times -- but it isn't as much of an ink guzzler as the r2400 This new computer of mine sat idle for over a year - but it had barely been used before that as I said, i'm hopeful ann On 3/6/2016 5:25 PM, David J Brooks wrote: sometimes my 2400 sits for months and i have to do several haed cleanings, just anFYI for you Dave On Sun, Mar 6, 2016 at 5:09 PM, ann sanfedele wrote: Wellsome but not all of the heads are cloggedso that the nozzle check doesn't even show a pattern I did use the head cleaning once but then just printed a colorful page of little squares and the colors were off, of course.. the lightlight black was so low that I can't do anything more until I replace it... I already have replaced 4 cartridges. The head on the matte black cartridge is fine.. I've been checking out the you tube stuff and plan to use the advice on two of them.. meanwhile I did clean the spikes a bit with windex - the RIte ade version of it, which I hope is fine.. The good news is , the nice lady I bought it from assured me that if it was a non starter she WOULD return my money even though the listing said not. and I'm covered by Ebay protection anyway. I remain optimistic that I can get the heads clean... it does print. If not I'll get my money back and start over. and I do love the ink jetprints I've gotten from any and all previous Epson ink jets I've had.. my r220 is still running strong. ann -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions. -- Science - Questions we may never find answers for. Religion - Answers we must never question. -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer UPDATED more :-)
This doesn't look like something I'll be trying after reading about it.. I really don't do a high volume of printing.. and some of the cautions were scary ann On 3/8/2016 8:33 AM, ann sanfedele wrote: Carlos, thanks I have windows 7... so no that new :-) ann On 3/8/2016 5:50 AM, Carlos R. wrote: When I had a pair of inkjet Epsoj printers, one of them found in the street and successfully recovered using this software, I used this SSC Service Utility to clean their heads with great results. It hasn't been updated for very long and I don't know if it will work in present Windows versions, but its head cleaning options worked much better than the ones in the original Epson printer driver. You might give it a try instead of trying more drastic cleaning methods. Link: http://www.ssclg.com/epsone.shtml Carlos El 08/03/2016 a las 3:37, ann sanfedele escribió: Well I didn't try to mix his formula... I did a couple of other things one or another of the several vids I watched suggested, plus the usualhead cleaner run.. so far the result is that the 5 left-most cartridges and heads are working fine or minorly off... but the 3 right most - cyan, magenta,yellow show no pattern whatsoever on the nozzle check print out... I got a little syringe (free, actually) from my local drug store and I have some little 3/16" (I think) tubing from a spent eyeclass and lens cleaning bottle... I'm ready to attempt flushing out the three key ports... but I may wait until my neighbor returns on Wed. who at least has steadier hands and more experience fiddling with things of this sort than I do - at least in recent times. Any opinion or caution on whether using that lens cleaning stuff with purified water? Or white vinegar and distilled water? Dave, Jostein, PAul - when you got your printers unclogged just using the head cleaning mechanism, were any of those nozzle check boxes missing entirely? ann On 3/7/2016 7:52 PM, Darren Addy wrote: On a serious note: In the other thread on "unclogging a printer head" I posted a link to a video from a fellow who describes making a DIY nozzle cleaning solution. His recipe does include Windex, but it is important to note that Windex now has multiple formulations and his recipe specifies using the Original formulation. On Mon, Mar 7, 2016 at 3:44 PM, Igor PDML-StRwrote: Jostein, It's probably the most popular brand of window (and kitchen counter) surface cleaner in the US: https://en.wikipedia.org/wiki/Windex "My Big Fat Greek Wedding" movie had a big reference to it. (Btw, that was a nice comedy, imho.) And I referred to that movie in my response as well. ("old Greek Windex") I couldn't find the relevant episode on Youtube, but here is the playwrite and actress describing the basis for that: https://www.youtube.com/watch?v=BJEDUuDmnTE Best, Igor Jostein Øksne Mon, 07 Mar 2016 10:55:10 -0800 wrote: Not familiar with the brand, but isn't it just some kind of organic solvent? Jostein Den 7. mars 2016 15.58.41 CET, skrev ann sanfedele : Glad to hear that, Jostein I'm off to B to buy two more cartridges that I should have gotten yesterday... don't ask.. I used the Rite-aidverson of Windex on a paper towel to wipe the spikes last night not realizing it wasn't Official Windex that I was loaned but the same chemistry. Crossing fingers I didn't cause more mischief - can't know until I replace the actually dead light light black. ann -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions. -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer UPDATED more :-)
Carlos, thanks I have windows 7... so no that new :-) ann On 3/8/2016 5:50 AM, Carlos R. wrote: When I had a pair of inkjet Epsoj printers, one of them found in the street and successfully recovered using this software, I used this SSC Service Utility to clean their heads with great results. It hasn't been updated for very long and I don't know if it will work in present Windows versions, but its head cleaning options worked much better than the ones in the original Epson printer driver. You might give it a try instead of trying more drastic cleaning methods. Link: http://www.ssclg.com/epsone.shtml Carlos El 08/03/2016 a las 3:37, ann sanfedele escribió: Well I didn't try to mix his formula... I did a couple of other things one or another of the several vids I watched suggested, plus the usualhead cleaner run.. so far the result is that the 5 left-most cartridges and heads are working fine or minorly off... but the 3 right most - cyan, magenta,yellow show no pattern whatsoever on the nozzle check print out... I got a little syringe (free, actually) from my local drug store and I have some little 3/16" (I think) tubing from a spent eyeclass and lens cleaning bottle... I'm ready to attempt flushing out the three key ports... but I may wait until my neighbor returns on Wed. who at least has steadier hands and more experience fiddling with things of this sort than I do - at least in recent times. Any opinion or caution on whether using that lens cleaning stuff with purified water? Or white vinegar and distilled water? Dave, Jostein, PAul - when you got your printers unclogged just using the head cleaning mechanism, were any of those nozzle check boxes missing entirely? ann On 3/7/2016 7:52 PM, Darren Addy wrote: On a serious note: In the other thread on "unclogging a printer head" I posted a link to a video from a fellow who describes making a DIY nozzle cleaning solution. His recipe does include Windex, but it is important to note that Windex now has multiple formulations and his recipe specifies using the Original formulation. On Mon, Mar 7, 2016 at 3:44 PM, Igor PDML-StRwrote: Jostein, It's probably the most popular brand of window (and kitchen counter) surface cleaner in the US: https://en.wikipedia.org/wiki/Windex "My Big Fat Greek Wedding" movie had a big reference to it. (Btw, that was a nice comedy, imho.) And I referred to that movie in my response as well. ("old Greek Windex") I couldn't find the relevant episode on Youtube, but here is the playwrite and actress describing the basis for that: https://www.youtube.com/watch?v=BJEDUuDmnTE Best, Igor Jostein Øksne Mon, 07 Mar 2016 10:55:10 -0800 wrote: Not familiar with the brand, but isn't it just some kind of organic solvent? Jostein Den 7. mars 2016 15.58.41 CET, skrev ann sanfedele : Glad to hear that, Jostein I'm off to B to buy two more cartridges that I should have gotten yesterday... don't ask.. I used the Rite-aidverson of Windex on a paper towel to wipe the spikes last night not realizing it wasn't Official Windex that I was loaned but the same chemistry. Crossing fingers I didn't cause more mischief - can't know until I replace the actually dead light light black. ann -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions. -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer UPDATED more :-)
When I had a pair of inkjet Epsoj printers, one of them found in the street and successfully recovered using this software, I used this SSC Service Utility to clean their heads with great results. It hasn't been updated for very long and I don't know if it will work in present Windows versions, but its head cleaning options worked much better than the ones in the original Epson printer driver. You might give it a try instead of trying more drastic cleaning methods. Link: http://www.ssclg.com/epsone.shtml Carlos El 08/03/2016 a las 3:37, ann sanfedele escribió: Well I didn't try to mix his formula... I did a couple of other things one or another of the several vids I watched suggested, plus the usualhead cleaner run.. so far the result is that the 5 left-most cartridges and heads are working fine or minorly off... but the 3 right most - cyan, magenta,yellow show no pattern whatsoever on the nozzle check print out... I got a little syringe (free, actually) from my local drug store and I have some little 3/16" (I think) tubing from a spent eyeclass and lens cleaning bottle... I'm ready to attempt flushing out the three key ports... but I may wait until my neighbor returns on Wed. who at least has steadier hands and more experience fiddling with things of this sort than I do - at least in recent times. Any opinion or caution on whether using that lens cleaning stuff with purified water? Or white vinegar and distilled water? Dave, Jostein, PAul - when you got your printers unclogged just using the head cleaning mechanism, were any of those nozzle check boxes missing entirely? ann On 3/7/2016 7:52 PM, Darren Addy wrote: On a serious note: In the other thread on "unclogging a printer head" I posted a link to a video from a fellow who describes making a DIY nozzle cleaning solution. His recipe does include Windex, but it is important to note that Windex now has multiple formulations and his recipe specifies using the Original formulation. On Mon, Mar 7, 2016 at 3:44 PM, Igor PDML-StRwrote: Jostein, It's probably the most popular brand of window (and kitchen counter) surface cleaner in the US: https://en.wikipedia.org/wiki/Windex "My Big Fat Greek Wedding" movie had a big reference to it. (Btw, that was a nice comedy, imho.) And I referred to that movie in my response as well. ("old Greek Windex") I couldn't find the relevant episode on Youtube, but here is the playwrite and actress describing the basis for that: https://www.youtube.com/watch?v=BJEDUuDmnTE Best, Igor Jostein Øksne Mon, 07 Mar 2016 10:55:10 -0800 wrote: Not familiar with the brand, but isn't it just some kind of organic solvent? Jostein Den 7. mars 2016 15.58.41 CET, skrev ann sanfedele : Glad to hear that, Jostein I'm off to B to buy two more cartridges that I should have gotten yesterday... don't ask.. I used the Rite-aidverson of Windex on a paper towel to wipe the spikes last night not realizing it wasn't Official Windex that I was loaned but the same chemistry. Crossing fingers I didn't cause more mischief - can't know until I replace the actually dead light light black. ann -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions. -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer
Thanks for sharing, Bipin. Jostein Den 8. mars 2016 07.15.16 CET, skrev Bipin Gupta: >Hi Jostein, you will get refillable cartridges (can be filled with ink >at home a number of times) or one time filled cartridges (which I can >also fill) for as low as $ 1 apiece from AliExpress (Ali Baba com) >China. >Note, AliExpress is like eBay here in the US / Canada. >The link is here:- >https://www.dropbox.com/sh/7tl52k0qnt95pms/AAATN8FPn7eryU3hnSpN1Ubla?dl=0 > >I bought the Ink bottles from eBay India as they were a lot cheaper - >$11 for a set of 5 x 100 ml Ink bottles. > >There is also a DIY CISS System - see here:- > >1. https://www.youtube.com/watch?v=MRKglF-c020 > >2. https://www.youtube.com/watch?v=c58tvY4cOYI > >3. https://www.youtube.com/watch?v=-eaYPrmKHxU > >4. https://www.youtube.com/watch?v=v5IoquwjX3w > >Don't be put off by people telling you that these will damage your >print head or the printer. >The trick is to never shut down the printer. Also take a test print >every week with all the colors in the text. >I use a Canon Pixma WiFi MG6470 All In One Printer. It uses both Dye >and Pigment based x 5 Ink Tanks. > >Surgical Syringes with needles are available here in India for half a >dollar apiece from Pharmacies. > >Regards. >Bipin > >from the IT capital of the world - Bangalore. -- Sent from my Android device with K-9 Mail. Please excuse my brevity. -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer
The Yellow, Magenta and Cyan cartridges are all brand new... The yellow and cyan were nearly depleted earlier and those were replaced yesterday... and a couple of nozzle checks run, today I replaced the magenta... If the whole carriage was off, the first 5 would not be ok.. and the matte black is next to the cyan and it is perfect ... Certainly not the cartridges themselves to blame here ann On 3/7/2016 9:52 PM, Igor PDML-StR wrote: Ann, I am neither of those three, but I will chime in as well. In my, even most severe case, when I needed 5+ cycles of head cleaning, none of the colors was missing completely, only certain areas of them. I am guessing that if the entire color is missing, it might be a sign that the clogging occured somewhere upstream. BTW, I think Yellow and Magenta get clogged the most. Occasionally, Cyan does. I am guessing, somehow, it might be related to the positioning. Or, maybe it is the type of the pigment (e.g. particle size, particle properties, drying speed, stickyness, etc.) Igor ann sanfedele Mon, 07 Mar 2016 18:38:54 -0800 wrote: Dave, Jostein, PAul - when you got your printers unclogged just using the head cleaning mechanism, were any of those nozzle check boxes missing entirely? ann -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer
Ann, I am neither of those three, but I will chime in as well. In my, even most severe case, when I needed 5+ cycles of head cleaning, none of the colors was missing completely, only certain areas of them. I am guessing that if the entire color is missing, it might be a sign that the clogging occured somewhere upstream. BTW, I think Yellow and Magenta get clogged the most. Occasionally, Cyan does. I am guessing, somehow, it might be related to the positioning. Or, maybe it is the type of the pigment (e.g. particle size, particle properties, drying speed, stickyness, etc.) Igor ann sanfedele Mon, 07 Mar 2016 18:38:54 -0800 wrote: Dave, Jostein, PAul - when you got your printers unclogged just using the head cleaning mechanism, were any of those nozzle check boxes missing entirely? ann -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer UPDATED more :-)
Well I didn't try to mix his formula... I did a couple of other things one or another of the several vids I watched suggested, plus the usualhead cleaner run.. so far the result is that the 5 left-most cartridges and heads are working fine or minorly off... but the 3 right most - cyan, magenta,yellow show no pattern whatsoever on the nozzle check print out... I got a little syringe (free, actually) from my local drug store and I have some little 3/16" (I think) tubing from a spent eyeclass and lens cleaning bottle... I'm ready to attempt flushing out the three key ports... but I may wait until my neighbor returns on Wed. who at least has steadier hands and more experience fiddling with things of this sort than I do - at least in recent times. Any opinion or caution on whether using that lens cleaning stuff with purified water? Or white vinegar and distilled water? Dave, Jostein, PAul - when you got your printers unclogged just using the head cleaning mechanism, were any of those nozzle check boxes missing entirely? ann On 3/7/2016 7:52 PM, Darren Addy wrote: On a serious note: In the other thread on "unclogging a printer head" I posted a link to a video from a fellow who describes making a DIY nozzle cleaning solution. His recipe does include Windex, but it is important to note that Windex now has multiple formulations and his recipe specifies using the Original formulation. On Mon, Mar 7, 2016 at 3:44 PM, Igor PDML-StRwrote: Jostein, It's probably the most popular brand of window (and kitchen counter) surface cleaner in the US: https://en.wikipedia.org/wiki/Windex "My Big Fat Greek Wedding" movie had a big reference to it. (Btw, that was a nice comedy, imho.) And I referred to that movie in my response as well. ("old Greek Windex") I couldn't find the relevant episode on Youtube, but here is the playwrite and actress describing the basis for that: https://www.youtube.com/watch?v=BJEDUuDmnTE Best, Igor Jostein Øksne Mon, 07 Mar 2016 10:55:10 -0800 wrote: Not familiar with the brand, but isn't it just some kind of organic solvent? Jostein Den 7. mars 2016 15.58.41 CET, skrev ann sanfedele : Glad to hear that, Jostein I'm off to B to buy two more cartridges that I should have gotten yesterday... don't ask.. I used the Rite-aidverson of Windex on a paper towel to wipe the spikes last night not realizing it wasn't Official Windex that I was loaned but the same chemistry. Crossing fingers I didn't cause more mischief - can't know until I replace the actually dead light light black. ann -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions. -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer
On a serious note: In the other thread on "unclogging a printer head" I posted a link to a video from a fellow who describes making a DIY nozzle cleaning solution. His recipe does include Windex, but it is important to note that Windex now has multiple formulations and his recipe specifies using the Original formulation. On Mon, Mar 7, 2016 at 3:44 PM, Igor PDML-StRwrote: > > Jostein, > > It's probably the most popular brand of window (and kitchen counter) > surface cleaner in the US: > https://en.wikipedia.org/wiki/Windex > "My Big Fat Greek Wedding" movie had a big reference to it. > (Btw, that was a nice comedy, imho.) > And I referred to that movie in my response as well. ("old Greek Windex") > > I couldn't find the relevant episode on Youtube, but here is the > playwrite and actress describing the basis for that: > https://www.youtube.com/watch?v=BJEDUuDmnTE > > > Best, > > Igor > > Jostein Øksne Mon, 07 Mar 2016 10:55:10 -0800 wrote: > > Not familiar with the brand, but isn't it just some kind of organic solvent? > Jostein > > > Den 7. mars 2016 15.58.41 CET, skrev ann sanfedele : >> >> Glad to hear that, Jostein >> >> I'm off to B to buy two more cartridges that I should have gotten >> yesterday... don't ask.. >> >> I used the Rite-aidverson of Windex on a paper towel to wipe the spikes >> >> last night not realizing it >> wasn't Official Windex that I was loaned but the same chemistry. >> Crossing fingers I didn't >> cause more mischief - can't know until I replace the actually dead >> light light black. >> >> ann > > > > -- > PDML Pentax-Discuss Mail List > PDML@pdml.net > http://pdml.net/mailman/listinfo/pdml_pdml.net > to UNSUBSCRIBE from the PDML, please visit the link directly above and > follow the directions. -- “The Earth is Art, The Photographer is only a Witness ” ― Yann Arthus-Bertrand, Earth from Above -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer
Jostein, It's probably the most popular brand of window (and kitchen counter) surface cleaner in the US: https://en.wikipedia.org/wiki/Windex "My Big Fat Greek Wedding" movie had a big reference to it. (Btw, that was a nice comedy, imho.) And I referred to that movie in my response as well. ("old Greek Windex") I couldn't find the relevant episode on Youtube, but here is the playwrite and actress describing the basis for that: https://www.youtube.com/watch?v=BJEDUuDmnTE Best, Igor Jostein Øksne Mon, 07 Mar 2016 10:55:10 -0800 wrote: Not familiar with the brand, but isn't it just some kind of organic solvent? Jostein Den 7. mars 2016 15.58.41 CET, skrev ann sanfedele: Glad to hear that, Jostein I'm off to B to buy two more cartridges that I should have gotten yesterday... don't ask.. I used the Rite-aidverson of Windex on a paper towel to wipe the spikes last night not realizing it wasn't Official Windex that I was loaned but the same chemistry. Crossing fingers I didn't cause more mischief - can't know until I replace the actually dead light light black. ann -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer
Jostein, the quoting was used to understand what keeps you attached to your printer. Almost any glue has some solvent that will work on it. :-) Igor PS. Never had to use a solvent against mice droppings, but have to deal with those in the patio every so often. Once, we've got mice visiting our "snacks storage" piece of furniture in the lab and leaving a serious "trail". I tried to call the university EHS (environment, health and safety) office to deal with that, but they refused. Jostein Øksne Mon, 07 Mar 2016 10:58:36 -0800 wrote: That took you some creative quoting, eh? What makes you think chemical solvents are any good on mouse droppings, Igor? Jostein Den 7. mars 2016 18.20.20 CET, skrev Igor PDML-StR: Jostein, I am sure some good solvent (good ol' Greek Windex?) will disolve those and will set you free! ;-) Cheers, Igor Jostein Øksne Mon, 07 Mar 2016 01:18:06 -0800 wrote: ... collecting dust and mouse droppings, ... I believe I'm stuck with it for good... Jostein -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer
That took you some creative quoting, eh? What makes you think chemical solvents are any good on mouse droppings, Igor? Jostein Den 7. mars 2016 18.20.20 CET, skrev Igor PDML-StR: > > >Jostein, I am sure some good solvent (good ol' Greek Windex?) will >disolve >those and will set you free! ;-) > >Cheers, > >Igor > > >Jostein Øksne Mon, 07 Mar 2016 01:18:06 -0800 wrote: > >... collecting dust and mouse droppings, >... >I believe I'm stuck with it for good... > >Jostein -- Sent from my Android device with K-9 Mail. Please excuse my brevity. -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer
Not familiar with the brand, but isn't it just some kind of organic solvent? Jostein Den 7. mars 2016 15.58.41 CET, skrev ann sanfedele: >Glad to hear that, Jostein > >I'm off to B to buy two more cartridges that I should have gotten >yesterday... don't ask.. > >I used the Rite-aidverson of Windex on a paper towel to wipe the spikes > >last night not realizing it >wasn't Official Windex that I was loaned but the same chemistry. >Crossing fingers I didn't >cause more mischief - can't know until I replace the actually dead >light light black. > >ann > > >On 3/7/2016 4:10 AM, Jostein Øksne wrote: >> My Epson stylus photo 2100 just keeps on working. It suffered one and >a half years sitting in an uninsulated barn, collecting dust and mouse >droppings, and still came through after four rounds through the >cleaning process. >> I believe I'm stuck with it for good... Or at least as long as >there's ink for it. >> Jostein >> >> Den 6. mars 2016 23.35.29 CET, skrev ann sanfedele > : >>> according to more than one of the guys in those you-tubes I've ben >>> looking at too much running of th head cleaning thing isnt good... >>> but with my R220 occasionally I had to run it two or three times -- >but >>> >>> it isn't as much of an ink guzzler as the r2400 >>> >>> This new computer of mine sat idle for over a year - but it had >barely >>> been used before that >>> >>> as I said, i'm hopeful >>> ann >>> >>> On 3/6/2016 5:25 PM, David J Brooks wrote: sometimes my 2400 sits for months and i have to do several haed cleanings, just anFYI for you Dave On Sun, Mar 6, 2016 at 5:09 PM, ann sanfedele >>> wrote: > Wellsome but not all of the heads are cloggedso that the nozzle >>> check > doesn't even show a pattern > I did use the head cleaning once but then just printed a colorful >>> page of > little squares and the colors were > off, of course.. the lightlight black was so low that I can't do >>> anything > more until I replace it... > I already have replaced 4 cartridges. The head on the matte black >>> cartridge > is fine.. > > I've been checking out the you tube stuff and plan to use the >advice >>> on two > of them.. meanwhile > I did clean the spikes a bit with windex - the RIte ade version of >>> it, which > I hope is fine.. > > The good news is , the nice lady I bought it from assured me that >if >>> it was > a non starter she WOULD > return my money even though the listing said not. and I'm covered >by >>> Ebay > protection anyway. > > I remain optimistic that I can get the heads clean... it does >print. >>> If not > I'll get my money back and start over. > > and I do love the ink jetprints I've gotten from any and all >>> previous Epson > ink jets I've had.. my r220 is > still running strong. > > ann > > -- > PDML Pentax-Discuss Mail List > PDML@pdml.net > http://pdml.net/mailman/listinfo/pdml_pdml.net > to UNSUBSCRIBE from the PDML, please visit the link directly above >>> and > follow the directions. -- Sent from my Android device with K-9 Mail. Please excuse my brevity. -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer
Jostein, I am sure some good solvent (good ol' Greek Windex?) will disolve those and will set you free! ;-) Cheers, Igor Jostein Øksne Mon, 07 Mar 2016 01:18:06 -0800 wrote: ... collecting dust and mouse droppings, ... I believe I'm stuck with it for good... Jostein -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer
Glad to hear that, Jostein I'm off to B to buy two more cartridges that I should have gotten yesterday... don't ask.. I used the Rite-aidverson of Windex on a paper towel to wipe the spikes last night not realizing it wasn't Official Windex that I was loaned but the same chemistry. Crossing fingers I didn't cause more mischief - can't know until I replace the actually dead light light black. ann On 3/7/2016 4:10 AM, Jostein Øksne wrote: My Epson stylus photo 2100 just keeps on working. It suffered one and a half years sitting in an uninsulated barn, collecting dust and mouse droppings, and still came through after four rounds through the cleaning process. I believe I'm stuck with it for good... Or at least as long as there's ink for it. Jostein Den 6. mars 2016 23.35.29 CET, skrev ann sanfedele: according to more than one of the guys in those you-tubes I've ben looking at too much running of th head cleaning thing isnt good... but with my R220 occasionally I had to run it two or three times -- but it isn't as much of an ink guzzler as the r2400 This new computer of mine sat idle for over a year - but it had barely been used before that as I said, i'm hopeful ann On 3/6/2016 5:25 PM, David J Brooks wrote: sometimes my 2400 sits for months and i have to do several haed cleanings, just anFYI for you Dave On Sun, Mar 6, 2016 at 5:09 PM, ann sanfedele wrote: Wellsome but not all of the heads are cloggedso that the nozzle check doesn't even show a pattern I did use the head cleaning once but then just printed a colorful page of little squares and the colors were off, of course.. the lightlight black was so low that I can't do anything more until I replace it... I already have replaced 4 cartridges. The head on the matte black cartridge is fine.. I've been checking out the you tube stuff and plan to use the advice on two of them.. meanwhile I did clean the spikes a bit with windex - the RIte ade version of it, which I hope is fine.. The good news is , the nice lady I bought it from assured me that if it was a non starter she WOULD return my money even though the listing said not. and I'm covered by Ebay protection anyway. I remain optimistic that I can get the heads clean... it does print. If not I'll get my money back and start over. and I do love the ink jetprints I've gotten from any and all previous Epson ink jets I've had.. my r220 is still running strong. ann -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions. -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer
My Epson stylus photo 2100 just keeps on working. It suffered one and a half years sitting in an uninsulated barn, collecting dust and mouse droppings, and still came through after four rounds through the cleaning process. I believe I'm stuck with it for good... Or at least as long as there's ink for it. Jostein Den 6. mars 2016 23.35.29 CET, skrev ann sanfedele: >according to more than one of the guys in those you-tubes I've ben >looking at too much running of th head cleaning thing isnt good... >but with my R220 occasionally I had to run it two or three times -- but > >it isn't as much of an ink guzzler as the r2400 > >This new computer of mine sat idle for over a year - but it had barely >been used before that > >as I said, i'm hopeful >ann > >On 3/6/2016 5:25 PM, David J Brooks wrote: >> sometimes my 2400 sits for months and i have to do several haed >> cleanings, just anFYI for you >> >> Dave >> >> On Sun, Mar 6, 2016 at 5:09 PM, ann sanfedele >wrote: >>> Wellsome but not all of the heads are cloggedso that the nozzle >check >>> doesn't even show a pattern >>> I did use the head cleaning once but then just printed a colorful >page of >>> little squares and the colors were >>> off, of course.. the lightlight black was so low that I can't do >anything >>> more until I replace it... >>> I already have replaced 4 cartridges. The head on the matte black >cartridge >>> is fine.. >>> >>> I've been checking out the you tube stuff and plan to use the advice >on two >>> of them.. meanwhile >>> I did clean the spikes a bit with windex - the RIte ade version of >it, which >>> I hope is fine.. >>> >>> The good news is , the nice lady I bought it from assured me that if >it was >>> a non starter she WOULD >>> return my money even though the listing said not. and I'm covered by >Ebay >>> protection anyway. >>> >>> I remain optimistic that I can get the heads clean... it does print. >If not >>> I'll get my money back and start over. >>> >>> and I do love the ink jetprints I've gotten from any and all >previous Epson >>> ink jets I've had.. my r220 is >>> still running strong. >>> >>> ann >>> >>> -- >>> PDML Pentax-Discuss Mail List >>> PDML@pdml.net >>> http://pdml.net/mailman/listinfo/pdml_pdml.net >>> to UNSUBSCRIBE from the PDML, please visit the link directly above >and >>> follow the directions. >> >> -- Sent from my Android device with K-9 Mail. Please excuse my brevity. -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer
according to more than one of the guys in those you-tubes I've ben looking at too much running of th head cleaning thing isnt good... but with my R220 occasionally I had to run it two or three times -- but it isn't as much of an ink guzzler as the r2400 This new computer of mine sat idle for over a year - but it had barely been used before that as I said, i'm hopeful ann On 3/6/2016 5:25 PM, David J Brooks wrote: sometimes my 2400 sits for months and i have to do several haed cleanings, just anFYI for you Dave On Sun, Mar 6, 2016 at 5:09 PM, ann sanfedelewrote: Wellsome but not all of the heads are cloggedso that the nozzle check doesn't even show a pattern I did use the head cleaning once but then just printed a colorful page of little squares and the colors were off, of course.. the lightlight black was so low that I can't do anything more until I replace it... I already have replaced 4 cartridges. The head on the matte black cartridge is fine.. I've been checking out the you tube stuff and plan to use the advice on two of them.. meanwhile I did clean the spikes a bit with windex - the RIte ade version of it, which I hope is fine.. The good news is , the nice lady I bought it from assured me that if it was a non starter she WOULD return my money even though the listing said not. and I'm covered by Ebay protection anyway. I remain optimistic that I can get the heads clean... it does print. If not I'll get my money back and start over. and I do love the ink jetprints I've gotten from any and all previous Epson ink jets I've had.. my r220 is still running strong. ann -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions. -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
Re: update on the new printer
sometimes my 2400 sits for months and i have to do several haed cleanings, just anFYI for you Dave On Sun, Mar 6, 2016 at 5:09 PM, ann sanfedelewrote: > Wellsome but not all of the heads are cloggedso that the nozzle check > doesn't even show a pattern > I did use the head cleaning once but then just printed a colorful page of > little squares and the colors were > off, of course.. the lightlight black was so low that I can't do anything > more until I replace it... > I already have replaced 4 cartridges. The head on the matte black cartridge > is fine.. > > I've been checking out the you tube stuff and plan to use the advice on two > of them.. meanwhile > I did clean the spikes a bit with windex - the RIte ade version of it, which > I hope is fine.. > > The good news is , the nice lady I bought it from assured me that if it was > a non starter she WOULD > return my money even though the listing said not. and I'm covered by Ebay > protection anyway. > > I remain optimistic that I can get the heads clean... it does print. If not > I'll get my money back and start over. > > and I do love the ink jetprints I've gotten from any and all previous Epson > ink jets I've had.. my r220 is > still running strong. > > ann > > -- > PDML Pentax-Discuss Mail List > PDML@pdml.net > http://pdml.net/mailman/listinfo/pdml_pdml.net > to UNSUBSCRIBE from the PDML, please visit the link directly above and > follow the directions. -- Documenting Life in Rural Ontario. www.caughtinmotion.com http://brooksinthecountry.blogspot.com/ York Region, Ontario, Canada -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.