Re: [pestlist] Powder Post Beetles

2011-02-03 Thread Alex Roach
Hi Robert

A few years ago we were asked to treat a Sydney ferry that was on display in a 
museum which was infested with powderpost beetles. During the refit for display 
a lot of Lyctus-susceptible timber was used.  There was extensive borer 
activity throughout the vessel, but especially below decks (oh joy) to deck 
supports, etc.

First we sprayed all the timber lightly with water to assist the uptake of the 
borate. We then applied Boracol to the timber using garden-type sprayers. We 
had to re-treat several areas a few months later (as further frass was noted), 
then one or two spots during the following year, but we eventually erradicated 
the borers.

One quick note: The timber you mentioned is very old, so I'm not sure if it 
will be the same insect as the one we dealt with here. The powderpost beetle 
(Lyctus brunneus) only attacks timber in the first 20ish years of service. Then 
the timber is too dry and can no longer be infested (by this borer, anyway). 
Even if it is another species, I'm sure the borate treatment would work.

Best wishes,
Alex

Alex Roach
Heritage Pest Management

On 04/02/2011, at 7:54 AM, "Jones, Robert (Ryan)"  wrote:

> One of our two-story historic buildings has recently shown signs of powder 
> post beetle infestation.
> 
>  
> 
> New flight holes (which were filled with frass and intermingled with old 
> flight holes) were located in the exposed ceiling beams of an unused cellar 
> room.  The beams were reportedly installed back in the 1940’s. We have noted 
> approximately 20-30 holes in the immediate vicinity that appear to be fresh. 
> We are now trying to decide what would be the best course of action in 
> getting rid of the problem.
> 
>  
> 
> Our first thought was to secure 8-10 glue board type traps 2-3 inches under 
> the beams (using tape or tacks) to determine if the holes are definitely 
> active. These glue boards would help us track new sawdust and/or emerging 
> beetles so that we could better understand the extent of the problem.
> 
>  
> 
> If the holes prove to be  active, we will have to take additional steps. We 
> were wondering if there is any value to treating the beams with Bora Care or 
> a similar borate product to kill burrowing larvae and prevent future 
> infestation. Most of what I have read about borate sprays has left me 
> wondering whether the finished product would penetrate the wood deep enough 
> to kill any of the larvae.
> 
>  
> 
> We would certainly like to avoid tenting the structure for obvious reasons.
> 
>  
> 
> Any thoughts or experiences on the management of powder post beetles?


[pestlist] Powder Post Beetles

2011-02-03 Thread Jones, Robert (Ryan)
One of our two-story historic buildings has recently shown signs of powder post 
beetle infestation.

New flight holes (which were filled with frass and intermingled with old flight 
holes) were located in the exposed ceiling beams of an unused cellar room.  The 
beams were reportedly installed back in the 1940's. We have noted approximately 
20-30 holes in the immediate vicinity that appear to be fresh. We are now 
trying to decide what would be the best course of action in getting rid of the 
problem.

Our first thought was to secure 8-10 glue board type traps 2-3 inches under the 
beams (using tape or tacks) to determine if the holes are definitely active. 
These glue boards would help us track new sawdust and/or emerging beetles so 
that we could better understand the extent of the problem.

If the holes prove to be  active, we will have to take additional steps. We 
were wondering if there is any value to treating the beams with Bora Care or a 
similar borate product to kill burrowing larvae and prevent future infestation. 
Most of what I have read about borate sprays has left me wondering whether the 
finished product would penetrate the wood deep enough to kill any of the larvae.

We would certainly like to avoid tenting the structure for obvious reasons.

Any thoughts or experiences on the management of powder post beetles?


RE: [pestlist] removing sticky traps from a silk object

2011-02-03 Thread Rose Daly

Thanks, I will keep you updated if we find a good technique. Hi from Kate and 
all of us. 
Rose 


From: psile...@cwf.org
To: pestlist@museumpests.net
Date: Thu, 3 Feb 2011 13:05:39 -0500
Subject: RE: [pestlist] removing sticky traps from a silk object






Rose, 
Our pest guy removes little lizards (live) from the traps using vegetable 
oil…not so good for silk, but maybe a starting point.
Patty
 


From: pestlist-ow...@museumpests.net [mailto:pestlist-ow...@museumpests.net] On 
Behalf Of Rose Daly
Sent: Thursday, February 03, 2011 12:49 PM
To: pestlist@museumpests.net
Subject: [pestlist] removing sticky traps from a silk object
 
Dear Pestlist:
 
A mishap in de-installation opened and attached the adhesive of a Victor roach 
trap to a silk book cover.  I know from personal experience that this adhesive 
is quite sticky and difficult to remove from anything.  Does anyone has 
experience removing a sticky trap from a textile?  If it was silk that is great 
but other textiles would be enlightening as well. I will be performing mock-ups 
and I can share the information with everyone on the website if you are 
interested. 
 
Thanks,
Rose   

Rose Daly
Graduate Fellow
Winterthur/University of Delaware Program in Art Conservation 
rose_d...@hotmail.com



  

RE: [pestlist] removing sticky traps from a silk object

2011-02-03 Thread Silence, Patricia
Rose,
Our pest guy removes little lizards (live) from the traps using vegetable 
oil...not so good for silk, but maybe a starting point.
Patty

From: pestlist-ow...@museumpests.net [mailto:pestlist-ow...@museumpests.net] On 
Behalf Of Rose Daly
Sent: Thursday, February 03, 2011 12:49 PM
To: pestlist@museumpests.net
Subject: [pestlist] removing sticky traps from a silk object

Dear Pestlist:

A mishap in de-installation opened and attached the adhesive of a Victor roach 
trap to a silk book cover.  I know from personal experience that this adhesive 
is quite sticky and difficult to remove from anything.  Does anyone has 
experience removing a sticky trap from a textile?  If it was silk that is great 
but other textiles would be enlightening as well. I will be performing mock-ups 
and I can share the information with everyone on the website if you are 
interested.

Thanks,
Rose

Rose Daly
Graduate Fellow
Winterthur/University of Delaware Program in Art Conservation
rose_d...@hotmail.com





[pestlist] removing sticky traps from a silk object

2011-02-03 Thread cg
This is a message from the Pest Management Database List.
To post to this list send it as an email to pestlist@museumpests.net
To unsubscribe please look at the footer of this email.
---







I no longer work at ICCROM. For any matters relating to periodical subscription 
please contact Gianna Paganelli, g...@iccrom.org

For any enquiries about Technical Assistance please contact Elisa Ortis, 
e...@iccrom.org

For any other matters please contact Paul Arenson, p...@iccrom.org

For anyone wishing to contact me personally, my email is chgeo...@libero.it

Christine Georgeff
-
To send an email to the list, send your msg to pestl...@museumpests.com

To unsubscribe from this list send an email to
imail...@museumpests.net and in the body put:
"unsubscribe pestlist"
Any problems email l...@zaks.com









[pestlist] removing sticky traps from a silk object

2011-02-03 Thread Rose Daly

Dear Pestlist:
 
A mishap in de-installation opened and attached the adhesive of a Victor roach 
trap to a silk book cover.  I know from personal experience that this adhesive 
is quite sticky and difficult to remove from anything.  Does anyone has 
experience removing a sticky trap from a textile?  If it was silk that is great 
but other textiles would be enlightening as well. I will be performing mock-ups 
and I can share the information with everyone on the website if you are 
interested. 
 
Thanks,
Rose   

Rose Daly
Graduate Fellow
Winterthur/University of Delaware Program in Art Conservation 
rose_d...@hotmail.com