Re: [SlimDevices: Plugins] ppc LMS does not scan
It is this thing: Compal CH7465LG And maybe it is not an issue once you have full control but I think most functionality is turned off by the ISP. Now that everything is running I will most likely have it set to bridge mode to avoid clashes with multiple DHCPs etc... 3 * Boom, 1 * Radio, 1 * Touch, 1 SB Classic, 2 SB Duet, 1pi with picoreplayer, server and music on Synology DS718+ library ~50.000 titles Mercenary's Profile: http://forums.slimdevices.com/member.php?userid=48563 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
Mercenary wrote: > Hi, > no. The pCP and the Synology were wired to the router and they are now > to the old router. > > Music is playing :) It sounds as if that new router had some sort of firewalling on the internal network or it was just plain rubbish. I dont think they are sold here. VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s *Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s *Dining Room* SB Boom *Kitchen* UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* Pi Zero+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV) & Bathroom* SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers *Guest Room* Joggler > Topping Amp -> Wharfedale Modus Cubes Everything controlled by iPeng & Material on iOS d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
Hi, no. The pCP and the Synology were wired to the router and they are now to the old router. Music is playing :) 3 * Boom, 1 * Radio, 1 * Touch, 1 SB Classic, 2 SB Duet, 1pi with picoreplayer, server and music on Synology DS718+ library ~50.000 titles Mercenary's Profile: http://forums.slimdevices.com/member.php?userid=48563 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
Is you pCP on WiFi? VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s *Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s *Dining Room* SB Boom *Kitchen* UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* Pi Zero+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV) & Bathroom* SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers *Guest Room* Joggler > Topping Amp -> Wharfedale Modus Cubes Everything controlled by iPeng & Material on iOS d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
d6jg wrote: > The %2 s should not be there. Type the mount point in dont paste it Unfortunately that was not it either. After typing it pcP just said that nothing had changed so I guess it was "correct" before. But I managed to get it working. I got totally fed up by the behaviour of the new router (Ziggo Connect Box for cable) because it has about 0 enhanced options and the basic functionality is completely unreliable - as this case has shown. I am not even able to switch it to bridge mode but have to call the ISP to do that...ridiculous. Since I was still running my Orbi satellites and router for the Wifi in the background I switched them back from access points to full router functionality and let them build their own subnet. Then I reconnected everything to the Orbi network, either cable or Wifi and after switching a few IPs here and there...the scan works. I don't know what is going on with this Ziggo router but it somehow has been the root problem from the beginning I guess. If anybody has got an idea I would be interested to learn about it and maybe it helps others who get into a similar problem. Who would have thought that it is the router?? Thanks for all your input and attempts to help. Cheers, Merc 3 * Boom, 1 * Radio, 1 * Touch, 1 SB Classic, 2 SB Duet, 1pi with picoreplayer, server and music on Synology DS718+ library ~50.000 titles Mercenary's Profile: http://forums.slimdevices.com/member.php?userid=48563 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
Mercenary wrote: > Hi Paul, > thanks. > > So here is what I did. > > 1. install pcp 8 > 2. remove all the permessions in the Synology NAS > 3. remove the mount in pcp > 4. restart pcp and also in the meantime restart the NAS > 5. wait for a decent time (10 minutes) - NAS was NOT hibernating or so > 6. enter the mount point in pcp again and apply > > then it got this: > > 35427 > > So behind, you can see in red that this caused a mount error, for > whatever reason. > > Any more ideas? > > The funny thing is that I have not touched the setup at all. All I did > was turn off the mains and then later turn it on again... > > As always thanks for your help. > > merc The %2 s should not be there. Type the mount point in dont paste it VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s *Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s *Dining Room* SB Boom *Kitchen* UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* Pi Zero+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV) & Bathroom* SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers *Guest Room* Joggler > Topping Amp -> Wharfedale Modus Cubes Everything controlled by iPeng & Material on iOS d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
paul- wrote: > The NAS must be fully up and running before pCP boots. If power outages > are common. You can increase the boot wait time where you setup the > network mounts on the pCP interface Hi Paul, thanks. So here is what I did. 1. install pcp 8 2. remove all the permessions in the Synology NAS 3. remove the mount in pcp 4. restart pcp and also in the meantime restart the NAS 5. wait for a decent time (10 minutes) - NAS was NOT hibernating or so 6. enter the mount point in pcp again and apply then it got this: 35427 +---+ |Filename: mount error.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=35427| +---+ Mercenary's Profile: http://forums.slimdevices.com/member.php?userid=48563 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
The NAS must be fully up and running before pCP boots. If power outages are common. You can increase the boot wait time where you setup the network mounts on the pCP interface piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
I have rebooted it many times today but will give it another try with exactly the right order. I am sure this had solved the issue before but today it did not seem to work. Thanks. Will feedback if it worked tomorrow. 3 * Boom, 1 * Radio, 1 * Touch, 1 SB Classic, 2 SB Duet, 1pi with picoreplayer, server and music on Synology DS718+ library ~50.000 titles Mercenary's Profile: http://forums.slimdevices.com/member.php?userid=48563 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
PS default IP of a Fritzbox is 192.168.178.1 which is a slightly obscure choice VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s *Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s *Dining Room* SB Boom *Kitchen* UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* Pi Zero+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV) & Bathroom* SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers *Guest Room* Joggler > Topping Amp -> Wharfedale Modus Cubes Everything controlled by iPeng & Material on iOS d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
Mercenary wrote: > Your bet is wrong unfortunately :) > I can get to the mount but cannot see any files. > > What do I need to change and why did this change in the first place? It > worked until this afternoon when I had to power off my equipment due to > some electrical installation work. Reboot the Pi After power comes on the NAS needs to be fully active before the Pi boots up in order to accept the mount. If the NAS is up and responding properly now a reboot of the Pi will probably fix VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s *Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s *Dining Room* SB Boom *Kitchen* UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* Pi Zero+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV) & Bathroom* SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers *Guest Room* Joggler > Topping Amp -> Wharfedale Modus Cubes Everything controlled by iPeng & Material on iOS d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
d6jg wrote: > File permissions then. > If you ssh onto pCP can you access the mount and read the files? > > Edit. Im betting you have a Fritzbox Your bet is wrong unfortunately :) I can get to the mount but cannot see any files. What do I need to change and why did this change in the first place? It worked until this afternoon when I had to power off my equipment due to some electrical installation work. 3 * Boom, 1 * Radio, 1 * Touch, 1 SB Classic, 2 SB Duet, 1pi with picoreplayer, server and music on Synology DS718+ library ~50.000 titles Mercenary's Profile: http://forums.slimdevices.com/member.php?userid=48563 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
Mercenary wrote: > Ok, no problem, if this helps. > > Router: 192.168.178.1 > Nas: 192.168.178.48 > pcp: 192.168.178.157 > > The mounted folder is showing up in LMS but the scan does not pick up > any files. > > 35425 File permissions then. If you ssh onto pCP can you access the mount and read the files? VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s *Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s *Dining Room* SB Boom *Kitchen* UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* Pi Zero+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV) & Bathroom* SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers *Guest Room* Joggler > Topping Amp -> Wharfedale Modus Cubes Everything controlled by iPeng & Material on iOS d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
d6jg wrote: > More info required > For example what are the IP addresses of > The router > pCP > NAS Ok, no problem, if this helps. Router: 192.168.178.1 Nas: 192.168.178.48 pcp: 192.168.178.157 The mounted folder is showing up in LMS but the scan does not pick up any files. 3 * Boom, 1 * Radio, 1 * Touch, 1 SB Classic, 2 SB Duet, 1pi with picoreplayer, server and music on Synology DS718+ library ~50.000 titles Mercenary's Profile: http://forums.slimdevices.com/member.php?userid=48563 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] ppc LMS does not scan
More info required For example what are the IP addresses of The router pCP NAS VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s *Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s *Dining Room* SB Boom *Kitchen* UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* Pi Zero+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV) & Bathroom* SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers *Guest Room* Joggler > Topping Amp -> Wharfedale Modus Cubes Everything controlled by iPeng & Material on iOS d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=114945 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
