NEW: apcupsd
Hi [EMAIL PROTECTED] I have made an effort to make a port of apcupsd. It is daemon for controlling APC UPSes. It also have CGI scripts for monitoring and graphical monitor for multiple UPSes. DESCR: Apcupsd can be used for power mangement and controlling most of APC's UPS models. Apcupsd works with most of APC's Smart-UPS models as well as most simple signalling models such a Back-UPS, and BackUPS-Office. During a power failure, apcupsd will inform the users about the power failure and that a shutdown may occur. If power is not restored, a system shutdown will follow when the battery is exhausted, a timeout (seconds) expires, or runtime expires based on internal APC calculations determined by power consumption rates. Needs testing, cause I have no hardware to test on. Any comments? -- () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments apcupsd.tar.gz Description: GNU Zip compressed data
Re: NEW: apcupsd
On Tue, Feb 12, 2008 at 11:28:29AM +0300, Kirill S. Bychkov wrote: Hi [EMAIL PROTECTED] I have made an effort to make a port of apcupsd. It is daemon for controlling APC UPSes. It also have CGI scripts for monitoring and graphical monitor for multiple UPSes. DESCR: Apcupsd can be used for power mangement and controlling most of APC's UPS models. Apcupsd works with most of APC's Smart-UPS models as well as most simple signalling models such a Back-UPS, and BackUPS-Office. During a power failure, apcupsd will inform the users about the power failure and that a shutdown may occur. If power is not restored, a system shutdown will follow when the battery is exhausted, a timeout (seconds) expires, or runtime expires based on internal APC calculations determined by power consumption rates. Needs testing, cause I have no hardware to test on. Any comments? How does it relate to sysutils/apc-upsd ? -- () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments -- viq
Re: [UPDATE] claws-mail-3.3.0
On Mon, Feb 11, 2008 at 01:25:28PM +0100, Landry Breuil wrote: On Sat, Feb 09, 2008 at 10:40:06PM +0100, Landry Breuil wrote: On Sat, Feb 09, 2008 at 10:15:46AM +0100, Ulrich Kahl wrote: Hi! Attached is a patch to update claws-mail to version 3.3.0. NOTE: The clamav-plugin is not part of this anymore, it is now available as external plugin due to licensing problems. changelog is here: http://www.claws-mail.org/news.php Tested and works so far on i386. Works fine here too @i386, i'm taking care of this update. Here is a diff against cvs (for cosmetic purposes) : http://gcu.info/~gaston/patches/claws-mail-3.3.0.diff (two patches from upstream integrated and removed in this one) Here are the diffs updating plugins (update needed, old plugins won't load with newer version of claws) : http://gcu.info/~gaston/patches/claws-mail-htmlviewer-0.17.diff Oops, sorry for this one, the good update is : http://gcu.info/~gaston/patches/claws-mail-htmlviewer-0.17.1.diff http://gcu.info/~gaston/patches/claws-mail-notification-0.15.diff http://gcu.info/~gaston/patches/claws-mail-pdfviewer-0.9.diff http://gcu.info/~gaston/patches/claws-mail-rssyl-0.18.diff http://gcu.info/~gaston/patches/claws-mail-vcalendar-1.101.diff (two patches from upstream integrated and removed in this one) Feedback welcome, okays too :) And finally here's a new port for the clamav plugin removed from the standard claws-mail package, which will probably be commited with the others : http://gcu.info/~gaston/ports/claws-mail-clamav-3.3.tar.gz (please note that to test this one, you'll need to have configured clamav/freshclam first, or plugin won't load) This one has to be reviewed wrt upgrade path, i suppose it should @conflict claws-mail-clamav-=3.2.0p0 or @pkgpath mail/claws-mail,-clamav gotta do some tests. And finally, here's a new diff that cleans/reorders LIB_DEPENDS/WANTLIB(/-main) http://gcu.info/~gaston/patches/claws-mail-3.3.0_2.diff make port-lib-depends-check seems still happy. ok ? Landry
Update: ion-20080207
Hi, This brings ion to the latest release. I was not sure that the changes to the config files were necessary. diff -urN ion/Makefile ion.new/Makefile --- ion/MakefileWed Feb 13 00:39:10 2008 +++ ion.new/MakefileWed Feb 13 00:08:16 2008 @@ -2,9 +2,9 @@ COMMENT= light, keyboard friendly window manager -V= 20070318 -DISTNAME= ion-3ds-${V} -PKGNAME= ion-${V}p1 +V= 20080207 +DISTNAME= ion-3-${V} +PKGNAME= ion-${V} CATEGORIES=x11 HOMEPAGE= http://modeemi.cs.tut.fi/~tuomov/ion/ diff -urN ion/distinfo ion.new/distinfo --- ion/distinfoWed Feb 13 00:39:10 2008 +++ ion.new/distinfoWed Feb 13 00:08:40 2008 @@ -1,5 +1,5 @@ -MD5 (ion-3ds-20070318.tar.gz) = 8CJkq37MmQws0yL1el6KTQ== -RMD160 (ion-3ds-20070318.tar.gz) = p8ybrqNiSw7YQP3IL8XbKsEBjZo= -SHA1 (ion-3ds-20070318.tar.gz) = 81Khx/b0ZUeBQdU4sqTD8+gaTzA= -SHA256 (ion-3ds-20070318.tar.gz) = cS2gJ/sSd09n2TPZWpVFLZilZYYX/FUVARynm2A1JYo= -SIZE (ion-3ds-20070318.tar.gz) = 657282 +MD5 (ion-3-20080207.tar.gz) = o2c8KcNnEG5cSRmsM3Ju7A== +RMD160 (ion-3-20080207.tar.gz) = Ek2Vkh8jZlhs2dI/PyRPJbOtJKk= +SHA1 (ion-3-20080207.tar.gz) = b5maj2dEvXmSrqfSU/FkHwVDmFQ= +SHA256 (ion-3-20080207.tar.gz) = jiz+Eax2IpDrbf2qDJGUf19e4VqIYMrzdp9SUIehhG8= +SIZE (ion-3-20080207.tar.gz) = 653316 diff -urN ion/patches/patch-etc_cfg_ioncore_lua ion.new/patches/patch-etc_cfg_ioncore_lua --- ion/patches/patch-etc_cfg_ioncore_lua Wed Feb 13 00:39:10 2008 +++ ion.new/patches/patch-etc_cfg_ioncore_lua Thu Jan 1 01:00:00 1970 @@ -1,36 +0,0 @@ -$OpenBSD: patch-etc_cfg_ioncore_lua,v 1.6 2007/03/28 19:33:04 pedro Exp $ etc/cfg_ioncore.lua.orig Sun Dec 24 08:45:26 2006 -+++ etc/cfg_ioncore.luaSun Dec 24 08:48:23 2006 -@@ -63,8 +63,8 @@ defbindings(WScreen, { - kpress(META..F9, ioncore.create_ws(_)), - - bdoc(Display the main menu.), --kpress(ALTMETA..F12, mod_query.query_menu(_, _sub, 'mainmenu', 'Main menu:')), ----kpress(ALTMETA..F12, mod_menu.menu(_, _sub, 'mainmenu', {big=true})), -+--kpress(ALTMETA..F12, mod_query.query_menu(_, _sub, 'mainmenu', 'Main menu:')), -+kpress(ALTMETA..F12, mod_menu.menu(_, _sub, 'mainmenu', {big=true})), - mpress(Button3, mod_menu.pmenu(_, _sub, 'mainmenu')), - - bdoc(Display the window list menu.), -@@ -139,10 +139,10 @@ defbindings(WMPlex.toplevel, { - kpress(META..T, WRegion.set_tagged(_sub, 'toggle'), _sub:non-nil), - - bdoc(Query for manual page to be displayed.), --kpress(ALTMETA..F1, mod_query.query_man(_, ':man')), -+kpress(ALTMETA..F1, mod_query.query_man(_, '::man')), - - bdoc(Show the Ion manual page.), --kpress(META..F1, ioncore.exec_on(_, ':man ion3')), -+kpress(META..F1, ioncore.exec_on(_, '::man ion3')), - - bdoc(Run a terminal emulator.), - kpress(ALTMETA..F2, ioncore.exec_on(_, XTERM or 'xterm')), -@@ -158,7 +158,7 @@ defbindings(WMPlex.toplevel, { - - bdoc(Query for file to edit.), - kpress(ALTMETA..F5, -- mod_query.query_editfile(_, 'run-mailcap --action=edit')), -+ mod_query.query_editfile(_, ':vi')), - - bdoc(Query for file to view.), - kpress(ALTMETA..F6, diff -urN ion/patches/patch-mod_statusbar_ion-statusd_statusd_mail_lua ion.new/patches/patch-mod_statusbar_ion-statusd_statusd_mail_lua --- ion/patches/patch-mod_statusbar_ion-statusd_statusd_mail_luaWed Feb 13 00:39:10 2008 +++ ion.new/patches/patch-mod_statusbar_ion-statusd_statusd_mail_luaThu Jan 1 01:00:00 1970 @@ -1,12 +0,0 @@ -$OpenBSD: patch-mod_statusbar_ion-statusd_statusd_mail_lua,v 1.2 2005/06/08 12:45:55 pedro Exp $ mod_statusbar/ion-statusd/statusd_mail.lua.origTue Jun 7 10:06:02 2005 -+++ mod_statusbar/ion-statusd/statusd_mail.lua Wed Jun 8 09:11:13 2005 -@@ -15,7 +15,7 @@ local mon = mail - local defaults={ - update_interval=10*1000, - retry_interval=60*10*1000, --mbox = os.getenv(MAIL), -+mbox = os.getenv(MAIL) or /var/mail/ .. os.getenv(USER), - files = {} - } - diff -urN ion/patches/patch-system_mk ion.new/patches/patch-system_mk --- ion/patches/patch-system_mk Wed Feb 13 00:39:10 2008 +++ ion.new/patches/patch-system_mk Wed Feb 13 00:19:29 2008 @@ -1,16 +1,16 @@ -$OpenBSD: patch-system_mk,v 1.8 2007/03/28 19:33:04 pedro Exp $ system.mk.orig Sat Dec 23 13:00:13 2006 -+++ system.mk Sun Dec 24 08:45:16 2006 -@@ -7,7 +7,7 @@ - ## Installation paths - ## +$OpenBSD$ +--- system.mk.orig Tue Feb 5 17:42:06 2008 system.mk Wed Feb 13 00:19:17 2008 +@@ -8,7 +8,7 @@ + # Installation path prefix. Unless you know what you're doing, the default + # of /usr/local is likely the correct choice. -PREFIX=/usr/local +#PREFIX=/usr/local # Unless you are creating a package conforming to some OS's standards, you # probably do not want to modify the following directories: -@@ -15,15 +15,16 @@ PREFIX=/usr/local +@@ -16,15 +16,16 @@ PREFIX=/usr/local # Main binaries BINDIR=$(PREFIX)/bin # Configuration .lua
Re: [Update] Port databases/p5-DBD-Pg
On Wed, Feb 13, 2008 at 11:37:32AM +0900, Mathieu Sauve-Frankel wrote: On Tue, Feb 12, 2008 at 11:46:28AM +0900, Mathieu Sauve-Frankel wrote: Hi, is the leak you talk about fixed in p5-DBD-Pg-2.00 ? 2.00 was released today and I would much rather update to that instead. please test the attached diff so far I have reports of this working on i386 and amd64, would someone with access to a sparc64 please test this ? Passes regress on sparc64, macppc and alpha. -ME To: [EMAIL PROTECTED] From: [EMAIL PROTECTED] Subject: PASS DBD-Pg-2.0.0 alpha-openbsd 4.2 Report: This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/ Please cc any replies to [EMAIL PROTECTED] to keep other test volunteers informed and to prevent any duplicate effort. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=openbsd, osvers=4.2, archname=alpha-openbsd uname='openbsd' config_args='-dsE -Dopenbsd_distribution=defined' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include', optimize='-O2', cppflags='-fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include' ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.2' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags ='-Wl,-E ' libpth=/usr/lib libs=-lm -lutil -lc perllibs=-lm -lutil -lc libc=/usr/lib/libc.so.43.0, so=so, useshrplib=true, libperl=libperl.so.10.1 gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-R/usr/libdata/perl5/alpha-openbsd/5.8.8/CORE' cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC 'To: [EMAIL PROTECTED] From: [EMAIL PROTECTED] Subject: PASS DBD-Pg-2.0.0 sparc64-openbsd 4.2 Report: This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/ Please cc any replies to [EMAIL PROTECTED] to keep other test volunteers informed and to prevent any duplicate effort. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=openbsd, osvers=4.2, archname=sparc64-openbsd uname='openbsd' config_args='-dsE -Dopenbsd_distribution=defined' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include', optimize='-O2', cppflags='-fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include' ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.2' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=87654321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='cc', ldflags ='-Wl,-E ' libpth=/usr/lib libs=-lm -lutil -lc perllibs=-lm -lutil -lc libc=/usr/lib/libc.so.43.0, so=so, useshrplib=true, libperl=libperl.so.10.1 gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-R/usr/libdata/perl5/sparc64-openbsd/5.8.8/CORE' cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC 'To: [EMAIL PROTECTED] From: [EMAIL PROTECTED] Subject: PASS DBD-Pg-2.0.0 powerpc-openbsd 4.2 Report: This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/ Please cc any replies to [EMAIL PROTECTED] to keep other test volunteers informed and to prevent any duplicate effort. -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=openbsd, osvers=4.2, archname=powerpc-openbsd uname='openbsd' config_args='-dsE -Dopenbsd_distribution=defined' hint=recommended, useposix=true, d_sigaction=define usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
Re: [Update] Port databases/p5-DBD-Pg
On Tue 2008.02.12 at 22:45 -0500, Okan Demirmen wrote: On Wed 2008.02.13 at 11:37 +0900, Mathieu Sauve-Frankel wrote: On Tue, Feb 12, 2008 at 11:46:28AM +0900, Mathieu Sauve-Frankel wrote: On Fri, Feb 08, 2008 at 04:44:23PM +0100, Steffen Sch???tz wrote: Second try Hi, is the leak you talk about fixed in p5-DBD-Pg-2.00 ? 2.00 was released today and I would much rather update to that instead. please test the attached diff so far I have reports of this working on i386 and amd64, would someone with access to a sparc64 please test this ? ran a perl/pg app with it - works... that was extraordinarily unspecific ;) to be more so, on sparc64, passes regress and i've got running a pg/perl app running on that sparc64 working ok. cheers, okan
Re: [Update] Port databases/p5-DBD-Pg
On Tue, Feb 12, 2008 at 11:46:28AM +0900, Mathieu Sauve-Frankel wrote: On Fri, Feb 08, 2008 at 04:44:23PM +0100, Steffen Sch???tz wrote: Second try Hi, is the leak you talk about fixed in p5-DBD-Pg-2.00 ? 2.00 was released today and I would much rather update to that instead. please test the attached diff so far I have reports of this working on i386 and amd64, would someone with access to a sparc64 please test this ?
cwm: XOpenDisplay()
now, cwm print XDisplayName(), when XOpenDisplay() is NULL. $ cwm -d 1 cwm: unable to open display 1 diff bellow: Index: calmwm.c === RCS file: /cvs/xenocara/app/cwm/calmwm.c,v retrieving revision 1.7 diff -u -r1.7 calmwm.c --- calmwm.c16 Jan 2008 11:39:20 - 1.7 +++ calmwm.c12 Feb 2008 22:34:26 - @@ -124,7 +124,7 @@ TAILQ_INIT(Screenq); if ((X_Dpy = XOpenDisplay(display_name)) == NULL) - errx(1, %s:%d XOpenDisplay(), __FILE__, __LINE__); + errx(1, unable to open display \%s\, XDisplayName(display_name)); XSetErrorHandler(x_errorhandler); calmwm.c.diff Description: Binary data
OpenBSD libtool include path
Hi, When I tried to compile the x11/openmotif port, it did not work because the compiler used the old include files from the installed openmotif package. Of course, it should use the include files from the port that is currently compiled. Then I used OpenBSD libtool instead of GNU libtool but compiling failed with the same error. I think the relative -I paths should be sorted in front of the absolute ones. Then the current port is searched first and after that /usr/local/include. With this patch, OpenBSD libtool can compile openmotif-2.3.0p0 even if openmotif-2.1.30.5p2 is still installed. Are there any libtool regression tests? ok ? bluhm Index: infrastructure/build/libtool === RCS file: /data/mirror/openbsd/cvs/ports/infrastructure/build/libtool,v retrieving revision 1.17 diff -u -p -r1.17 libtool --- infrastructure/build/libtool16 Nov 2007 15:37:20 - 1.17 +++ infrastructure/build/libtool12 Feb 2008 22:19:07 - @@ -188,6 +188,27 @@ if ($mode eq 'compile') { (my $nonpicobj = $ofile) =~ s/\.lo$/.o/; my $picobj = $ltdir/$nonpicobj; + # uniquely sort relative include paths in front of absolute paths + my(%abs_incs, %rel_incs); + my $i = 0; # index to keep the order of the include paths + my @other_argv; + while (@ARGV) { + local $_ = shift @ARGV; + if (m,^-I$, @ARGV) { + $_ .= shift @ARGV; + } + if (m,^-I/,) { + $abs_incs{$_} ||= ++$i; + } elsif (m,^-I.,) { + $rel_incs{$_} ||= ++$i; + } else { + push @other_argv, $_; + } + } + push @ARGV, sort { $rel_incs{$a} = $rel_incs{$b} } keys %rel_incs; + push @ARGV, sort { $abs_incs{$a} = $abs_incs{$b} } keys %abs_incs; + push @ARGV, @other_argv; + handle_special_chars([EMAIL PROTECTED]); mkdir $odir/$ltdir if (! -d $odir/$ltdir);
Re: update: editors/vim 7.1.175 - 7.1.244
On Mon, Feb 11, 2008 at 10:42:45AM -0800, Chris Kuethe wrote: i guess it helps if i attach the diff On Feb 11, 2008 10:37 AM, Chris Kuethe [EMAIL PROTECTED] wrote: Whole bunch of updates, this should also fix the -python flavor. Python users, please test. The diff fixes the problem we were seeing when both python and gtk2 flavors were enabled. Builds fine with gtk2, both with and without python flavor, but make port-lib-depends-check is not happy : WANTLIB += Xau Xcomposite Xcursor Xdamage Xfixes Xi Xinerama Xrandr WANTLIB += expat the attached diff fixes it, and building with no_x11 flavor is fine with it too (all tests @i386, gotta fire the u60 to test sparc64). Landry Index: Makefile === RCS file: /cvs/ports/editors/vim/Makefile,v retrieving revision 1.88 diff -u -u -r1.88 Makefile --- Makefile1 Jan 2008 17:02:26 - 1.88 +++ Makefile12 Feb 2008 18:30:50 - @@ -4,7 +4,7 @@ COMMENT-lang= vi clone, NLS subpackage DISTNAME= vim-7.1 -REVISION= 175 +REVISION= 244 VERSION= 7.1.${REVISION} # keep PKGNAME for full version number PKGNAME= vim-${VERSION} @@ -26,10 +26,11 @@ PATCHFILES=# _patches!= jot -w%03d - 1 ${REVISION} 1 | \ - egrep -v '003|007|041|065|070|072|080|088|091|092|122|123|124|126|128|129|134|146|158|168' + egrep -v '003|007|041|065|070|072|080|088|091|092|122|123|124|126|128|129|134|146|158|168|176|178|186|187|191|196|197|204' .for p in ${_patches} PATCHFILES+= 7.1.${p}:0 .endfor +PATCHFILES+= 7.1.126ne:0 # allow vim to build on m68k and vax .if (${MACHINE_ARCH} == m68k) @@ -97,12 +98,13 @@ WANTLIB+= ICE SM X11 Xaw Xext Xmu Xpm Xt .elif ${FLAVOR:L:Mgtk2} \ !${FLAVOR:L:Mmotif} !${FLAVOR:L:Mno_x11} !${FLAVOR:L:Mathena} -LD+= -pthread -CC+= -pthread +MAKE_FLAGS+= 'LDFLAGS=-pthread' +MAKE_FLAGS+= 'CFLAGS=-pthread' LIB_DEPENDS+= gdk-x11-2.0.=0.11,gdk_pixbuf-2.0.=0.11,gtk-x11-2.0.=0.11::x11/gtk+2 CONFIGURE_ARGS+=--enable-gui=gtk2 --with-x --enable-fontset --enable-xim --disable-gtk-check --enable-gtk2-check USE_X11= Yes WANTLIB+= ICE SM X11 Xext Xrender Xt fontconfig freetype m z\ + Xau Xcomposite Xcursor Xdamage Xfixes Xi Xinerama Xrandr expat \ atk-1.0 glib-2.0 gmodule-2.0 gobject-2.0 png\ pango-1.0 pangoft2-1.0 pangocairo-1.0 cairo pthread glitz .else Index: distinfo === RCS file: /cvs/ports/editors/vim/distinfo,v retrieving revision 1.23 diff -u -u -r1.23 distinfo --- distinfo1 Jan 2008 17:02:26 - 1.23 +++ distinfo12 Feb 2008 18:30:50 - @@ -110,6 +110,7 @@ MD5 (vim71/7.1.120) = kzg0BOjsmZ3T/mz2rgbaFw== MD5 (vim71/7.1.121) = clZj3CbTVczrzERzkreysA== MD5 (vim71/7.1.125) = wDuS4QLRH5CS/mnbYKXRdw== +MD5 (vim71/7.1.126ne) = TSMwqGqF3C2DVqgUmErtkw== MD5 (vim71/7.1.127) = DWm32mAJ8d20kfYzn3TsTw== MD5 (vim71/7.1.130) = cKXJio6GpMx8J2458rwKBA== MD5 (vim71/7.1.131) = q6P4x6EGuRFtjIfC/7PWbg== @@ -153,6 +154,67 @@ MD5 (vim71/7.1.173) = n256l7JiIZvRMX7wwZGz9w== MD5 (vim71/7.1.174) = /5el9Dj66+c8Oj7jzHVYjQ== MD5 (vim71/7.1.175) = 0lNVCGt4iHH6I+X4+kzIOg== +MD5 (vim71/7.1.177) = cz6ia8JFoP9tGyY3wqSgBA== +MD5 (vim71/7.1.179) = tNqp8HiAMj8nknVnJLAJ0A== +MD5 (vim71/7.1.180) = TMOqksI6bhtwiFItlTB54g== +MD5 (vim71/7.1.181) = SOzi9gsKz+uzrt1FI4Ls2w== +MD5 (vim71/7.1.182) = 2hrmv2OPhuFzioXjwxhGYA== +MD5 (vim71/7.1.183) = 0SfeyREcb7zjK2i5gPv5NA== +MD5 (vim71/7.1.184) = 05avuPj9lHOOZyam2CDLiQ== +MD5 (vim71/7.1.185) = 6LniZrulZUrhpZS9b3X4kw== +MD5 (vim71/7.1.188) = 3RURGT/5TICMpqgyACS/Vg== +MD5 (vim71/7.1.189) = aumDbRk7Bq7V261pGWZNPQ== +MD5 (vim71/7.1.190) = dJX+qgPnMDXMdQfxh/p17w== +MD5 (vim71/7.1.192) = NwK0L0bcYSfpylejrMp+Tw== +MD5 (vim71/7.1.193) = aQ7UEHkZq7RmX0aCk6DVYw== +MD5 (vim71/7.1.194) = VaKxbWyr4WMStaLdybnXCQ== +MD5 (vim71/7.1.195) = jUmSd26xnJNxe1W7oIRDMg== +MD5 (vim71/7.1.198) = P4qP0Y38HtJTPgw76R31SQ== +MD5 (vim71/7.1.199) = /mq6bjz3sK6R3BKIRqlGhQ== +MD5 (vim71/7.1.200) = KHJd6TJQsbv1NW25GIorXA== +MD5 (vim71/7.1.201) = 4X0iSapcVTjnMU4QitO6TQ== +MD5 (vim71/7.1.202) = LHfZklTUMo2VtYD5guTnKg== +MD5 (vim71/7.1.203) = 6txuvnTNRXc2zAahjGshZA== +MD5 (vim71/7.1.205) = s0bSZVh48+iL4tVI8S3+gQ== +MD5 (vim71/7.1.206) = ZuZ2QqimUOmI0bSX00Aw6A== +MD5 (vim71/7.1.207) = cvV2r+GLSwQfLOzmtsEkVw== +MD5 (vim71/7.1.208) = Zw12J9zY7IfcBLzduIX2Bg== +MD5 (vim71/7.1.209) = QgusHFSf437cRqkxrJhunQ== +MD5 (vim71/7.1.210) = PIos4DcSYzEhCvEPynCwDw== +MD5 (vim71/7.1.211) = h2iqvqUcLMn7PDhEjPMNrg== +MD5 (vim71/7.1.212) = eLqAem7lvmFG7kX/a5hQFA== +MD5 (vim71/7.1.213) = BP/z29EbuhMyOZvTJupGaw== +MD5 (vim71/7.1.214) = 159BSMa7EeqXIvYNqKilTw== +MD5 (vim71/7.1.215) = W3BBNaLzBNLZd4s58xhQvw== +MD5 (vim71/7.1.216) = aFd1XYK2iaySo9Kf8ZB7Ow== +MD5 (vim71/7.1.217) = zF4SOA6H5THxMBf2Iy+2uA== +MD5 (vim71/7.1.218) = 7aPF1SvGqwZASyD7qiqUhw== +MD5 (vim71/7.1.219) =
[still new]: aircrack-ng-1.0-beta2
Update for this port I made ages ago. Back than many tools in this suite didn't even compile, but in the 1.0 line, which is still considered experimental, support for OpenBSD has improved quite a bit. E.g. arp injection is possible provided you have a card that can run in monitor mode. Both patches included in this port have already been applied upstream and will be part of future versions. Tested on OpenBSD-current/i386 with a Ralink card. -- stefan http://stsp.name PGP Key: 0xF59D25F0 aircrack-ng-1.0-beta2.tar.gz Description: Binary data pgpFYwm6JjG3V.pgp Description: PGP signature
Re: x11/kde/multimedia3 fails to package
On Tue, Feb 12, 2008 at 03:51:16PM +0100, viq wrote: Some of the recent updates (xine?) apparently broke kdemultimedia3 build, gzipped build log attached, also available (1.3MB !) at http://viq.ath.cx/obsd/kdemultimedia-3.5.8p1.log the 4 part version causes the problem here's a patch. maybe someone has a faster machine and can verify this before me ;) -- [EMAIL PROTECTED] SDF Public Access UNIX System - http://sdf.lonestar.org Index: patches/patch-configure_in === RCS file: /home/cvs/OpenBSD/ports/x11/kde/multimedia3/patches/patch-configure_in,v retrieving revision 1.30 diff -u -r1.30 patch-configure_in --- patches/patch-configure_in 11 Dec 2007 07:55:05 - 1.30 +++ patches/patch-configure_in 12 Feb 2008 15:39:59 - @@ -1,6 +1,6 @@ $OpenBSD: patch-configure_in,v 1.30 2007/12/11 07:55:05 jakemsr Exp $ configure.in.orig Mon Oct 8 16:26:39 2007 -+++ configure.in Wed Oct 24 12:03:20 2007 +--- configure.in.orig Mon Oct 8 07:26:39 2007 configure.in Tue Feb 12 07:34:11 2008 @@ -164,22 +164,22 @@ AC_DEFUN([KDE_CHECK_OGGVORBIS], [:], [have_oggvorbis=no]) @@ -151,7 +151,22 @@ AC_SUBST(THIS_LIB_LIBS) dnl === dnl FILE: ./mpeglib/lib/mpegplay/configure.in.in -@@ -1765,7 +1758,7 @@ dnl Check for new internal xine symbol names +@@ -1602,11 +1595,11 @@ AC_ARG_ENABLE(xinetest, + XINE_CFLAGS=`$XINE_CONFIG $xine_config_args --cflags` + XINE_LIBS=`$XINE_CONFIG $xine_config_args --libs` + xine_config_major_version=`$XINE_CONFIG $xine_config_args --version | \ +- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` ++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\1/'` + xine_config_minor_version=`$XINE_CONFIG $xine_config_args --version | \ +- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` ++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\2/'` + xine_config_sub_version=`$XINE_CONFIG $xine_config_args --version | \ +- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` ++ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\3/'` + xine_script_dir=`$XINE_CONFIG $xine_config_args --scriptdir` + xine_plugin_dir=`$XINE_CONFIG $xine_config_args --plugindir` + xine_locale_dir=`$XINE_CONFIG $xine_config_args --localedir` +@@ -1768,7 +1761,7 @@ dnl Check for new internal xine symbol names KDE_CHECK_LIB(xine, _x_ao_new_port, :, [ AC_DEFINE(_x_ao_new_port, ao_new_port, [Compatibility with older version of xine])
Re: update: editors/vim 7.1.175 - 7.1.244
On Feb 12, 2008 7:36 AM, Simon Bertrang [EMAIL PROTECTED] wrote: On Mon, Feb 11, 2008 at 10:42:45AM -0800, Chris Kuethe wrote: i guess it helps if i attach the diff On Feb 11, 2008 10:37 AM, Chris Kuethe [EMAIL PROTECTED] wrote: Whole bunch of updates, this should also fix the -python flavor. Python users, please test. CK -- GDB has a 'break' feature; why doesn't it have 'fix' too? Not having tested any flavor except the default one, it builds, packages and works on amd64, i386 and macppc. Built python no_x11 flavors on i386 working great. Brandon
Re: NEW: audio/aqualung
Jeremy Evans [2008-02-11, 10:41:56]: This is a new port for aqualung, an advanced music player supporting all major audio formats (and many minor ones). It is the only open source audio program that I'm aware of that has full support for Replaygain. I've been working with the Aqualung development team since October to get it fully supported on OpenBSD. All my patches have been accepted upstream, and yesterday they released a beta version that fully supports OpenBSD. Homepage: http://aqualung.factorial.hu/ Tested on i386. Please test and commit. seems to work fine on amd64 here. i'll take care of it.
Re: update: editors/vim 7.1.175 - 7.1.244
On Mon, Feb 11, 2008 at 10:42:45AM -0800, Chris Kuethe wrote: i guess it helps if i attach the diff On Feb 11, 2008 10:37 AM, Chris Kuethe [EMAIL PROTECTED] wrote: Whole bunch of updates, this should also fix the -python flavor. Python users, please test. CK -- GDB has a 'break' feature; why doesn't it have 'fix' too? Not having tested any flavor except the default one, it builds, packages and works on amd64, i386 and macppc. Ok regards, Simon
Re: NEW: apcupsd
I beg you pardon. Last time i changed one patch and haven't tested it... Should look this way: cat patches/patch-src_gapcmon_gapcmon_c $OpenBSD$ --- src/gapcmon/gapcmon.c.orig Sat Jan 19 21:43:52 2008 +++ src/gapcmon/gapcmon.c Sat Feb 2 10:26:27 2008 @@ -75,6 +75,7 @@ #include sys/types.h /* socket() */ #include sys/socket.h /* socket() */ #include arpa/inet.h /* ntohs() */ +#include netinet/in.h /* sockaddr_in */ #include netdb.h /* gethostbyname() */ #include errno.h #include string.h /* memset() */ @@ -4080,7 +4081,7 @@ static gboolean gapc_util_load_icons(PGAPC_CONFIG pcfg gchar pch_file[GAPC_MAX_ARRAY]; gchar *pch_2 = ./; gchar *pch_3 = ../pixmaps/; - gchar *pch_4 = /usr/share/pixmaps/; + gchar *pch_4 = ${PREFIX}/share/misc/apcupsd/pixmaps; gchar *pch_image_names[] = { online.png, onbatt.png, On Tue, February 12, 2008 14:25, Michael wrote: Hi, Kirill S. Bychkov schrieb: Needs testing, cause I have no hardware to test on. Any comments? Build fails on OpenBSD-current with FLAVORS client and x11. Configuration on Tue Feb 12 12:20:51 CET 2008: Host: i386-unknown-openbsd4.2 -- openbsd 4.2 Apcupsd version:3.14.3 (20 January 2008) Source code location: . Install binaries: /usr/local/sbin Install config files: /etc/apcupsd Install man files: /usr/local/man Nologin file in:/tmp PID directory: /var/run LOG dir (events, status)/var/log LOCK dir (for serial port) /tmp Power Fail dir /etc/apcupsd Compiler: c++ 3.3.5 Compiler flags: -O2 -pipe -Wall Linker: cc Linker flags: -g -O -pthread Host and version: openbsd 4.2 Shutdown Program: /sbin/shutdown Port/Device:/dev/cua01 Network Info Port (CGI):3551 UPSTYPE net UPSCABLEether drivers (no-* are disabled): no-apcsmart no-dumb net bsd-usb no-snmp no-pcnet no-test enable-nis: yes with-nisip: no enable-cgi: no with-cgi-bin: /etc/apcupsd with-libwrap: enable-nls: no enable-libintl: no enable-powerflute: no enable-pthreads:yes enable-dist-install:no enable-gapcmon: yes === Building for apcupsd-3.14.3-client gmake[1]: Entering directory `/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/src/lib' c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcconfig.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcerror.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcevents.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcexec.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcfile.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apclibnis.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apclock.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apclog.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcsignal.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcstatus.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include asys.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include newups.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include md5.c ar rc libapc.a apcconfig.o apcerror.o apcevents.o apcexec.o apcfile.o apclibnis.o apclock.o apclog.o apcsignal.o apcstatus.o asys.o newups.o md5.o /usr/bin/ranlib libapc.a gmake[1]: Leaving directory `/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/src/lib' gmake[1]: Entering
Re: NEW: apcupsd
On Tue, February 12, 2008 13:59, Stuart Henderson wrote: On 2008/02/12 13:38, Kirill S. Bychkov wrote: It is reincarnation of apc-upsd. If my port will be added to the tree, apcupsd should be removed It would make more sense to keep the name of the port the same then. But the name of the project was changed some years ago. And you can see the same name in FreeBSD and NetBSD ports trees -- () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments
Re: NEW: apcupsd
On 2008/02/12 13:38, Kirill S. Bychkov wrote: It is reincarnation of apc-upsd. If my port will be added to the tree, apcupsd should be removed It would make more sense to keep the name of the port the same then.
Re: NEW: apcupsd
Hi, Kirill S. Bychkov schrieb: Needs testing, cause I have no hardware to test on. Any comments? Build fails on OpenBSD-current with FLAVORS client and x11. Configuration on Tue Feb 12 12:20:51 CET 2008: Host: i386-unknown-openbsd4.2 -- openbsd 4.2 Apcupsd version:3.14.3 (20 January 2008) Source code location: . Install binaries: /usr/local/sbin Install config files: /etc/apcupsd Install man files: /usr/local/man Nologin file in:/tmp PID directory: /var/run LOG dir (events, status)/var/log LOCK dir (for serial port) /tmp Power Fail dir /etc/apcupsd Compiler: c++ 3.3.5 Compiler flags: -O2 -pipe -Wall Linker: cc Linker flags: -g -O -pthread Host and version: openbsd 4.2 Shutdown Program: /sbin/shutdown Port/Device:/dev/cua01 Network Info Port (CGI):3551 UPSTYPE net UPSCABLEether drivers (no-* are disabled): no-apcsmart no-dumb net bsd-usb no-snmp no-pcnet no-test enable-nis: yes with-nisip: no enable-cgi: no with-cgi-bin: /etc/apcupsd with-libwrap: enable-nls: no enable-libintl: no enable-powerflute: no enable-pthreads:yes enable-dist-install:no enable-gapcmon: yes === Building for apcupsd-3.14.3-client gmake[1]: Entering directory `/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/src/lib' c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcconfig.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcerror.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcevents.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcexec.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcfile.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apclibnis.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apclock.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apclog.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcsignal.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include apcstatus.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include asys.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include newups.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include md5.c ar rc libapc.a apcconfig.o apcerror.o apcevents.o apcexec.o apcfile.o apclibnis.o apclock.o apclog.o apcsignal.o apcstatus.o asys.o newups.o md5.o /usr/bin/ranlib libapc.a gmake[1]: Leaving directory `/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/src/lib' gmake[1]: Entering directory `/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/src/libusbhid' c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include parse.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include data.c c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread -I/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/include descr.c ar rc libusbhid.a parse.o data.o descr.o /usr/bin/ranlib libusbhid.a gmake[1]: Leaving directory `/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/src/libusbhid' gmake[1]: Entering directory `/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/src/drivers' gmake[2]: Entering directory `/usr/ports/mystuff/apcupsd/w-apcupsd-3.14.3-client-x11/apcupsd-3.14.3/src/drivers/net' c++ -c -fno-exceptions -fno-rtti -O2 -pipe -Wall -pthread
Re: NEW: apcupsd
It is reincarnation of apc-upsd. If my port will be added to the tree, apcupsd should be removed http://archives.neohapsis.com/archives/openbsd/2001-07/2782.html Devin Reade was a maintainer of OpenBSD specific part of code. I have some conversation with him and he told me, that he have no objections of my maintaning this port. On Tue, February 12, 2008 12:25, viq wrote: On Tue, Feb 12, 2008 at 11:28:29AM +0300, Kirill S. Bychkov wrote: Hi [EMAIL PROTECTED] I have made an effort to make a port of apcupsd. It is daemon for controlling APC UPSes. It also have CGI scripts for monitoring and graphical monitor for multiple UPSes. DESCR: Apcupsd can be used for power mangement and controlling most of APC's UPS models. Apcupsd works with most of APC's Smart-UPS models as well as most simple signalling models such a Back-UPS, and BackUPS-Office. During a power failure, apcupsd will inform the users about the power failure and that a shutdown may occur. If power is not restored, a system shutdown will follow when the battery is exhausted, a timeout (seconds) expires, or runtime expires based on internal APC calculations determined by power consumption rates. Needs testing, cause I have no hardware to test on. Any comments? How does it relate to sysutils/apc-upsd ? -- () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments -- viq
Re: NEW: apcupsd
Hi, Kirill S. Bychkov schrieb: I beg you pardon. Last time i changed one patch and haven't tested it... Should look this way: cat patches/patch-src_gapcmon_gapcmon_c $OpenBSD$ --- src/gapcmon/gapcmon.c.orig Sat Jan 19 21:43:52 2008 +++ src/gapcmon/gapcmon.c Sat Feb 2 10:26:27 2008 @@ -75,6 +75,7 @@ #include sys/types.h /* socket() */ #include sys/socket.h /* socket() */ #include arpa/inet.h /* ntohs() */ +#include netinet/in.h /* sockaddr_in */ #include netdb.h /* gethostbyname() */ #include errno.h #include string.h /* memset() */ @@ -4080,7 +4081,7 @@ static gboolean gapc_util_load_icons(PGAPC_CONFIG pcfg gchar pch_file[GAPC_MAX_ARRAY]; gchar *pch_2 = ./; gchar *pch_3 = ../pixmaps/; - gchar *pch_4 = /usr/share/pixmaps/; + gchar *pch_4 = ${PREFIX}/share/misc/apcupsd/pixmaps; gchar *pch_image_names[] = { online.png, onbatt.png, Thanks, this works. Michael
[UPDATE] sane-backends-1.0.19
Hello. This diff updates sane-backends to version 1.0.19. Please test. Comments/OK? -- AntoineIndex: Makefile === RCS file: /cvs/ports/graphics/sane-backends/Makefile,v retrieving revision 1.16 diff -u -r1.16 Makefile --- Makefile25 Oct 2007 20:43:14 - 1.16 +++ Makefile12 Feb 2008 12:28:20 - @@ -2,9 +2,8 @@ COMMENT= API for accessing scanners, backends -DISTNAME= sane-backends-1.0.18 -PKGNAME= ${DISTNAME}p3 -SHARED_LIBS= sane 1.17 +DISTNAME= sane-backends-1.0.19 +SHARED_LIBS= sane 1.17 # .0.0 CATEGORIES=graphics HOMEPAGE= http://www.sane-project.org/ @@ -22,6 +21,7 @@ http://gd.tuwien.ac.at/hci/sane/${DISTNAME}/ \ ftp://gd.tuwien.ac.at/hci/sane/${DISTNAME}/ \ ftp://ftp.sane-project.org/pub/sane/old-versions/${DISTNAME}/ + WANTLIB= c m pthread exif ltdl z LIB_DEPENDS= usb.=7::devel/libusb \ @@ -30,20 +30,23 @@ gphoto2.=2,gphoto2_port.=5::graphics/libgphoto2 MODULES= devel/gettext + USE_LIBTOOL= Yes USE_GMAKE= Yes -CONFIGURE_STYLE=gnu +NO_REGRESS=Yes + +CONFIGURE_STYLE=gnu CONFIGURE_ENV= CPPFLAGS=-I${LOCALBASE}/include \ LDFLAGS=-L${LOCALBASE}/lib \ ac_cv_path_MAKEDEPEND=no CONFIGURE_ARGS=${CONFIGURE_SHARED} \ - --sbindir=${LOCALBASE}/libexec \ - --with-docdir=${LOCALBASE}/share/doc/sane-backends \ + --sbindir=${PREFIX}/libexec \ + --with-docdir=${PREFIX}/share/doc/sane-backends \ --localstatedir=/var/spool \ --with-gphoto2 \ --with-group=553 -NO_REGRESS=Yes +FAKE_FLAGS=configdir=${PREFIX}/share/examples/sane-backends/sane.d .include bsd.port.mk Index: distinfo === RCS file: /cvs/ports/graphics/sane-backends/distinfo,v retrieving revision 1.4 diff -u -r1.4 distinfo --- distinfo5 Apr 2007 16:19:58 - 1.4 +++ distinfo12 Feb 2008 12:28:20 - @@ -1,5 +1,5 @@ -MD5 (sane-backends-1.0.18.tar.gz) = fKfikI4kchRx3pLPQMdeYA== -RMD160 (sane-backends-1.0.18.tar.gz) = qoY63/QX18M8u4XBk4eKpUoFYQA= -SHA1 (sane-backends-1.0.18.tar.gz) = 9MNguHztKH5AFaDa/XZq2IXFOeE= -SHA256 (sane-backends-1.0.18.tar.gz) = 14dqeMVnawxLwpCRx6fhKHtcC+X/W7Ye8DP7/8c9ZvM= -SIZE (sane-backends-1.0.18.tar.gz) = 3789493 +MD5 (sane-backends-1.0.19.tar.gz) = jAk2Jy3P1OmMUVEmmfHAbw== +RMD160 (sane-backends-1.0.19.tar.gz) = Gq8wTL/rPWyV9ggdBCJUQah7ZkQ= +SHA1 (sane-backends-1.0.19.tar.gz) = P/ju+o8y5y3NuqS/IP4SXfkBRNU= +SHA256 (sane-backends-1.0.19.tar.gz) = EycafrTcSqYHIWKrvXiEjk+q0yxGi5tE5/lc3pak4X4= +SIZE (sane-backends-1.0.19.tar.gz) = 4293184 Index: patches/patch-backend_Makefile_in === RCS file: /cvs/ports/graphics/sane-backends/patches/patch-backend_Makefile_in,v retrieving revision 1.2 diff -u -r1.2 patch-backend_Makefile_in --- patches/patch-backend_Makefile_in 14 Aug 2006 12:55:30 - 1.2 +++ patches/patch-backend_Makefile_in 12 Feb 2008 12:28:20 - @@ -1,16 +1,7 @@ $OpenBSD: patch-backend_Makefile_in,v 1.2 2006/08/14 12:55:30 kurt Exp $ backend/Makefile.in.orig Sun Jun 11 13:10:59 2006 -+++ backend/Makefile.inTue Aug 8 22:52:13 2006 -@@ -26,7 +26,7 @@ infodir = @infodir@ - mandir = @mandir@ - includedir = @includedir@ - oldincludedir = /usr/include --configdir = ${sysconfdir}/sane.d -+configdir = ${datadir}/examples/$(PACKAGE)/sane.d - BEOS_ADDONDIR = @BEOS_ADDONDIR@ - - V_MAJOR = @V_MAJOR@ -@@ -180,7 +180,8 @@ DISTFILES = abaton.c abaton.conf.in abat +--- backend/Makefile.in.orig Mon Feb 11 00:02:31 2008 backend/Makefile.inTue Feb 12 11:40:39 2008 +@@ -213,7 +213,8 @@ DISTFILES = Makefile.in saned.conf.in sane_strstatus.c libsane-%.la: %.lo %-s.lo $(EXTRA) $(LIBOBJS) @$(LIBTOOL) $(MLINK) $(CC) -export-dynamic -o $@ $($*_LIBS) \ $(LDFLAGS) $(BACKENDLIBS) $^ @LIBTOOL_LINK_EXTRA@ -rpath $(libsanedir) \ @@ -20,7 +11,7 @@ %-s.lo: %-s.c @$(LIBTOOL) $(MCOMP) $(COMPILE) -DSTUBS -DBACKEND_NAME=$* $ -@@ -208,7 +209,7 @@ install-be: +@@ -241,7 +242,7 @@ install-be: $(LIBTOOL) $(MINST) $(INSTALL_PROGRAM) $${be} \ $(DESTDIR)$(libsanedir)/$${be} /dev/null || exit 1; \ done @@ -29,7 +20,7 @@ @# Remove libsane.* links in lib/sane/ as these links to libsane-v4l.so @# cause misdetection of scanners. rm -f $(DESTDIR)$(libsanedir)/libsane.* -@@ -237,7 +238,7 @@ install-libsane: +@@ -270,7 +271,7 @@ install-libsane: @echo installing libsane.la in $(DESTDIR)$(libdir)/libsane.la... @$(LIBTOOL) $(MINST) $(INSTALL_PROGRAM) libsane.la \ $(DESTDIR)$(libdir)/libsane.la /dev/null @@ -38,7 +29,7 @@ install-becfg: @list=$(CONFIGS); for cfg in $$list; do \ -@@
Re: UPDATE: games/micropolis
Works okay on i386 with very light testing. SDL sounds were working and the quit button from window decoration works now in the main menu. -- Antti Harri