from:"Ed Ahlsen\-Girard"

Re: keepassxc will not run under OpenBSD 7.2-current (GENERIC.MP)#1059

2023-02-21 Thread Ed Ahlsen-Girard

From: Stuart Henderson
Sent: Tuesday, February 21, 2023 7:29 AM
To: Edward Ahlsen-Girard
Cc: ports@openbsd.org
Subject: Re: keepassxc will not run under OpenBSD 7.2-current (GENERIC.MP)#1059

On 2023/02/21 06:07, Edward Ahlsen-Girard wrote:
> On Tue, 21 Feb 2023 08:19:15 +
> Stuart Henderson  wrote:
> 
> > You have a mixture of packages with different library versions. Run
> > pkg_add -u.
> > 
> 
> Error has diminished to:
> 
> "ld.so: keepassxc: can't load library 'libdouble-conversion.so.1.0'
> Killed" i.e., "warning: libzstd.so.6.1: minor version >= 2 expected,
> using it anyway" is gone.
> 
> Firefox behavior mentioned in a different message is
> unchanged. pkg_add -u was run with no package specified and again with
> each package specified.

Which mirror are you using? Check that all files in the packages dir
on the mirror are from around the same date/time.

Any errors from pkg_add -u? (You don't need to specify each package,
just run "pkg_add -u" by itself).

https://mirror.esc7.net/pub/OpenBSD/snapshots/packages/
https://cdn.openbsd.org/pub/OpenBSD/snapshots/packages/

No difference yet.

Re: rox-filer on -current has been slow for a week or so.

2022-01-20 Thread Ed Ahlsen-Girard

On Thu, 20 Jan 2022 08:44:22 +
Stuart Henderson  wrote:

> On 2022/01/19 08:27, Ed Ahlsen-Girard wrote:
>  [...]  
>  [...]  
>  [...]  
> 
> If you run a base system build as root, it automatically drops to the
> "build" user. So either /usr/obj needs to be writable by "build", or
> don't run it as root.
> 

OK, compiled, installed, and booted. rox-filer is much, much snappier
now, so your hypothesis regarding an uncommitted diff being tested 
remains open.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: rox-filer on -current has been slow for a week or so.

2022-01-19 Thread Ed Ahlsen-Girard

On Wed, 19 Jan 2022 11:04:09 +
Stuart Henderson  wrote:

> On 2022/01/18 19:23, Ed Ahlsen-Girard wrote:
>  [...]  
> 
> First thing to try is a self-built kernel to check if it's some
> uncommitted diff being tested in snapshots.
> 
> If that doesn't change anything then go back to older kernel code,
> leaving userland alone. I would do a kernel build with a date-based
> cvs checkout to see this (e.g. cvs up -D 2022/01/10).
> 
> Basically try to narrow down what area was changed that caused it to
> slow down.
> 
>  [...]  

I can't, a reason that is not obvious to me:

[hostname]# make obj
mkdir: /usr/obj/sys: Permission denied
*** Error 1 in /sys/arch/amd64/compile/GENERIC.MP (:61
'obj': @cd /sys/arch/amd64/compile/GENERIC.MP;  umask 007;
here=`/bin/pw...)

make obj was run from an su session.



-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

rox-filer on -current has been slow for a week or so.

2022-01-18 Thread Ed Ahlsen-Girard

Been running amd64 -current for several years, and over the last week
the response time of rox-filer has been massively longer than before
(about 10 or 15 times as long).

The rate of snapshot release has been very high lately. Is something
going on with rox?

dmesg below the signature.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL


OpenBSD 7.0-current (GENERIC.MP) #262: Mon Jan 17 10:57:07 MST 2022
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4176125952 (3982MB)
avail mem = 4032364544 (3845MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xec530 (36 entries)
bios0: vendor AMI version "80.06" date 04/01/2015
bios0: Hewlett-Packard 550-036
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MSDM SSDT SSDT MCFG HPET SSDT SSDT DBGP
acpi0: wakeup devices RP01(S4) PXSX(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) 
PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S3) 
EHC2(S3) XHC_(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3692.01 MHz, 06-3c-03
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.48 MHz, 06-3c-03
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.47 MHz, 06-3c-03
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.47 MHz, 06-3c-03
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf800, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP04)
acpiprt3 at acpi0: bus 3 (RP06)
acpiprt4 at acpi0: bus 4 (RP07)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x 0x0011 0x0001
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource

Re: pta(1)

2022-01-14 Thread Ed Ahlsen-Girard

On Fri, 14 Jan 2022 09:28:15 +0100
Stefan Hagen  wrote:

> Hi Ed,
> 
> Ed Ahlsen-Girard wrote:
>  [...]  
> 
> Are you sure you installed this from packages or ports? I searched on
> a mirror that contains all releases, and we never had a package
> matching "*pta*tgz".
> 
> I also checked on a 6.9 machine and couldn't find a package that is
> providing (s)bin/pta.
> 
> Best Regards,
> Stefan

Frankly, no. I had decided to try it several months ago, had not done
much, and I don't remember exactly what the process was.

Checking the project site.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

pta(1)

2022-01-13 Thread Ed Ahlsen-Girard

Has it been removed from ports? I reinstalled a machine from scratch
and it seems unavailable now.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: Firefox crashes

2021-06-16 Thread Ed Ahlsen-Girard

On Mon, 14 Jun 2021 12:45:36 +
Nicola Dell'Uomo  wrote:

> I actually don't know what's the problem; however in safe mode
> everything works. Can we help by submitting more data to the porter?
> 
> 
> Sent with ProtonMail Secure Email.
> 
> ‐‐‐ Original Message ‐‐‐
> 
> Il lunedì 14 giugno 2021 1:03 PM, Ed Ahlsen-Girard 
> ha scritto:
> 
>  [...]  
>  [...]  
>  [...]  

Maybe. Mr. @sthen asked for output messages from running from the
command line, which I did, but that seems not to be sufficient.

Compiling a debug version might help, but I can't consider that for a
couple of weeks.. 
-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: Firefox crashes

2021-06-14 Thread Ed Ahlsen-Girard

On Mon, 14 Jun 2021 08:34:17 +
Nicola Dell'Uomo  wrote:

> Hi,
> I had the same problem with some sites, however it worked fine for me
> in safe mode (maybe something related to language extensions and/or
> extensions?).
> 
> Give it a try.
> 
> Sent with ProtonMail Secure Email.
> 
> ‐‐‐ Original Message ‐‐‐
> 
> Il domenica 13 giugno 2021 9:08 PM, Ed Ahlsen-Girard
>  ha scritto:
> 
>  [...]  

Safe mode ran better so far. In my case it's not language extensions.

I may try killing them one by one to find the culprit.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Firefox crashes

2021-06-13 Thread Ed Ahlsen-Girard

Firefox from snapshot Fri Jun 11 08:31:52 MDT 2021 is crashing
spontaneously on the following three tabs:
https://www.tarptent.com/product/notch/#tab-id-3
https://www.google.com/search?client=firefox-b-1-d=four+season+tents
https://seatosummitusa.com/products/ultralight-insulated-mat?variant=7896105484316

This is when not running anything in particular.

Message:

Exiting due to channel error.
Exiting due to channel error.
Exiting due to channel error.
Exiting due to channel error.
Crash Annotation GraphicsCriticalError: |[C0][GFX1-]: Receive IPC close
with reason=AbnormalShutdown (t=179.718) [GFX1-]: Receive IPC close
with reason=AbnormalShutdown Exiting due to channel error. Segmentation
fault (core dumped)



-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: FireFox crashing on credential submission

2021-06-07 Thread Ed Ahlsen-Girard

As requested, below signature. 

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL


Terminal output:
firefox
Crash Annotation GraphicsCriticalError: |[0][GFX1-]: glxtest: libpci
missing (t=0.718576) [GFX1-]: glxtest: libpci missing Exiting due to
channel error. Exiting due to channel error.
Exiting due to channel error.
Segmentation fault (core dumped)

There is a core file, it's about 200MB. 

dmesg follows, because I'm not sure what else you mean.

OpenBSD 6.9-current (GENERIC.MP) #55: Sat Jun  5 22:32:17 MDT 2021
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4176125952 (3982MB)
avail mem = 4034080768 (3847MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xec530 (36 entries)
bios0: vendor AMI version "80.06" date 04/01/2015
bios0: Hewlett-Packard 550-036
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MSDM SSDT SSDT MCFG HPET SSDT SSDT DBGP
acpi0: wakeup devices RP01(S4) PXSX(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) 
PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S3) 
EHC2(S3) XHC_(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.98 MHz, 06-3c-03
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.47 MHz, 06-3c-03
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.46 MHz, 06-3c-03
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.46 MHz, 06-3c-03
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf800, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP04)
acpiprt3 at acpi0: bus 3 (RP06)
acpiprt4 at acpi0: bus 4 (RP07)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x 0x0011 0x0001
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at

Re: Libreoffice Application Error after Jan 13 snapshot

2021-01-15 Thread Ed Ahlsen-Girard

> Subject:Re: Libreoffice Application Error after Jan 13 snapshot
> From:   Christian Weisgerber 
> Date:   2021-01-15 16:05:13
> Message-ID: slrns03f9p.7p4.naddy () lorvorc ! mips ! inka ! de
On 2021-01-15, Christian Weisberger  wrote:

> 
> On 2021-01-14, Ed Ahlsen-Girard  wrote:
> 
> > Libreoffice puts the splash screen up and closes within two
> > seconds, with a message on the command line of Application Error.
> > Nothing is logged in messages.
> 
> So it seems that LibreOffice is broken with libc++ 10.0 and the
> upstream fix I added is not enough.
> 
> OpenBSD is definitely not the only system to build LibreOffice with
> clang 10.0.  Corresponding fixes must be out there somewhere...
> 
> -- 
> Christian "naddy" Weisgerber
> na...@mips.inka.de

So, polite torches and pitchforks to the Open Document Foundation?
-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Libreoffice Application Error after Jan 13 snapshot

2021-01-14 Thread Ed Ahlsen-Girard

Dear ports@,

Libreoffice puts the splash screen up and closes within two
seconds, with a message on the command line of Application Error.
Nothing is logged in messages.

I have uninstalled and reinstalled, deleting the profile directory in
between. No dice.

dmesg below signature.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

OpenBSD 6.8-current (GENERIC.MP) #275: Wed Jan 13 11:52:47 MST 2021
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4176125952 (3982MB)
avail mem = 4034244608 (3847MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xec530 (36 entries)
bios0: vendor AMI version "80.06" date 04/01/2015
bios0: Hewlett-Packard 550-036
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MSDM SSDT SSDT MCFG HPET SSDT SSDT DBGP
acpi0: wakeup devices RP01(S4) PXSX(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) 
PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S3) 
EHC2(S3) XHC_(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.92 MHz, 06-3c-03
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.47 MHz, 06-3c-03
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.47 MHz, 06-3c-03
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.47 MHz, 06-3c-03
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf800, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP04)
acpiprt3 at acpi0: bus 3 (RP06)
acpiprt4 at acpi0: bus 4 (RP07)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x 0x0011 0x0001
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for

Firefox over ssh

2020-06-24 Thread Ed Ahlsen-Girard

I used to be able to run the browser on one box from another box. No
longer, for some time.

Is this related to unveil? Is there a way around other than recompiling
firefox?

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

FIrefox related panic from uaccess.h

2019-08-01 Thread Ed Ahlsen-Girard

Sometimes if Firefox is being kept busy, generally by moving around in
Facebook from tab to tab, I see a panic:

panic kernel diagnostic assertion "curcpu()->ci_inatomic == 0" failed:
file "/usr/src/sys/dev/pci/drm/include/linux/uaccess.h line 83

Which is in the center of this:

#if defined(__i386__) || defined(__amd64__)

static inline void
pagefault_disable(void)
{
KASSERT(curcpu()->ci_inatomic == 0);
curcpu()->ci_inatomic = 1;
}

static inline void
pagefault_enable(void)

dmesg below sig.


-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL


OpenBSD 6.5-current (GENERIC.MP) #159: Wed Jul 31 01:36:44 MDT 2019
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4176125952 (3982MB)
avail mem = 4039421952 (3852MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xec530 (36 entries)
bios0: vendor AMI version "80.06" date 04/01/2015
bios0: Hewlett-Packard 550-036
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MSDM SSDT SSDT MCFG HPET SSDT SSDT DBGP
acpi0: wakeup devices RP01(S4) PXSX(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) 
PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S3) 
EHC2(S3) XHC_(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.98 MHz, 06-3c-03
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.46 MHz, 06-3c-03
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.45 MHz, 06-3c-03
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.45 MHz, 06-3c-03
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf800, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP04)
acpiprt3 at acpi0: bus 3 (RP06)
acpiprt4 at acpi0: bus 4 (RP07)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpipci0 at acpi0 PCI0: 0x 0x0011

Re: Ports tree locked for 6.5 release

2019-04-06 Thread Ed Ahlsen-Girard

> From:   Marc Espie 
> Date:   2019-04-06 13:24:35
> Message-ID: 20190406132435.GA7545 () lain ! home
> [Download RAW message or body]
> 
> On Fri, Apr 05, 2019 at 07:11:57AM -0500, Edward Lopez-Acosta wrote:
> > You are correct its not my process, but I am still curious as to the
> > rationale which is just a question that was not answered. Nowhere
> > did I suggest, or imply, that it should be changed.
> 
> There's no rationale.
> 
> Just experimental results.
> 
> We did lots of tweaks to the release process over the years.
> 
> The current way is what causes the least amount of angst among
> developers.

"That which experiment has found, though theory had no part in,
Is always reckoned more than sound to put your mind and heart in."

Wolfgang Pauli as Faust in the Blegdamsvej Faust (performed at a Solvay
Conference), recorded by George Gamow in Thirty Years That Shook
Physics.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: simple-mtpfs panics

2019-01-22 Thread Ed Ahlsen-Girard

On Mon, 21 Jan 2019 21:32:55 -0200
Martin Pieuchot  wrote:

> On 21/01/19(Mon) 09:36, Ed Ahlsen-Girard wrote:
> > After this command sequence while a Galaxy S8 running
> > R16NW.G950USQU5CSA4 is plugged in:
> 
> Does it also happen when you unplug your phone w/o using mtp-connect?

No, the phone unplugs with no effect.
> 
> How does your phone appear in the dmesg?

umodem0 at uhub4 port 4 configuration 2 interface 1 "SAMSUNG
SAMSUNG_Android" rev 2.10/4.00 addr 6 umodem0: data interface 2, has no
CM over data, has no break umodem0: status change notification available
ucom0 at umodem0
ugen1 at uhub4 port 4 configuration 2 "SAMSUNG SAMSUNG_Android" rev
2.10/4.00 addr 6

> 
> Do you see any 'detach' message before the panic?  Could you include
> them in your report? 

I don't recall seeing one, but I'll look for it.
> 
> > 
> > doas mtp-connect
> > doas simple-mtpfs /mnt
> > 
> > I eventually end up here:
> > 
> > login: panic: free: size too small  16 <= 64 / 2
> > (0x80da7ac0) type USB Stopped at  db_enter+0x12:
> > popq %r11 TIDPIDUID PRFLAGS  PFLAGS  CPU
> > COMMAND 154398  12758 350x12   01  Xorg
> > *409957  13277  0 0x14000   0x2000K usbtask
> > db_enter() at db_enter+0x12
> > panic() at panic+0x120
> > free(cc5dea5c80df9709,80e2c000,80dfbe00) at
> > free+0x3cf usbd_free_device(0) at usb_free_device+0xf6
> > usbd_detach(268907f288667fb8,80904500) at usbd_detach+0x81
> > uhub_port_connect(b1a3e43ba98bd4a1,80904500,19,6) at
> > uhub_port_connect+0x66 uhub_explore(280398b005991987) at
> > uhub_explore+0x208 uhub_explore(280398b00585e61e) at
> > uhub_explore+0x24e usb_explore(89e789df119a3f2) at usb_explore+0x87
> > usb_task_thread(0) at usb_task_thread+0x100
> > end trace frame: 0x0, count: 5
> > 
> > Sometimes I have useful connectivity for a while, possibly
> > associated with the state of the snapshot being run. I did not have
> > that today. Eventually, though, it always ends with something 
> > like this. The keyboard is unresponsive at this point, so I have
> > run no debugger commands. dmesg below signature.
> > 
> > 
> > My dmesg:
> > 
> > 
> > -- 
> > 
> > Edward Ahlsen-Girard
> > Ft Walton Beach, FL
> > 
> > 
> > OpenBSD 6.4-current (GENERIC.MP) #623: Fri Jan 18 22:57:22 MST 2019
> > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 4176125952 (3982MB)
> > avail mem = 4039950336 (3852MB)
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xec530 (36 entries)
> > bios0: vendor AMI version "80.06" date 04/01/2015
> > bios0: Hewlett-Packard 550-036
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP APIC FPDT FIDT MSDM SSDT SSDT MCFG HPET SSDT
> > SSDT DBGP acpi0: wakeup devices PXSX(S4) RP01(S4) PXSX(S4) PXSX(S4)
> > PXSX(S4) RP04(S4) PXSX(S4) PXSX(S4) RP06(S4) PXSX(S4) RP07(S4)
> > PXSX(S4) GLAN(S4) EHC1(S3) EHC2(S3) XHC_(S3) [...] acpitimer0 at
> > acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0:
> > PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0:
> > Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.98 MHz, 06-3c-03 cpu0:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> > cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0
> > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 99MHz
> > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
> > cpu1 at mainbus0: apid 2 (application processor)
> > cpu1: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.46 MHz, 06-3c-03
> > cpu1:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> > cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0
>

simple-mtpfs panics

2019-01-21 Thread Ed Ahlsen-Girard

After this command sequence while a Galaxy S8 running
R16NW.G950USQU5CSA4 is plugged in:

doas mtp-connect
doas simple-mtpfs /mnt

I eventually end up here:

login: panic: free: size too small  16 <= 64 / 2 (0x80da7ac0)
type USB Stopped at  db_enter+0x12:  popq %r11
TIDPIDUID PRFLAGS  PFLAGS  CPU  COMMAND
 154398  12758 350x12   01  Xorg
*409957  13277  0 0x14000   0x2000K usbtask
db_enter() at db_enter+0x12
panic() at panic+0x120
free(cc5dea5c80df9709,80e2c000,80dfbe00) at free+0x3cf
usbd_free_device(0) at usb_free_device+0xf6
usbd_detach(268907f288667fb8,80904500) at usbd_detach+0x81
uhub_port_connect(b1a3e43ba98bd4a1,80904500,19,6) at
uhub_port_connect+0x66 uhub_explore(280398b005991987) at
uhub_explore+0x208 uhub_explore(280398b00585e61e) at uhub_explore+0x24e
usb_explore(89e789df119a3f2) at usb_explore+0x87
usb_task_thread(0) at usb_task_thread+0x100
end trace frame: 0x0, count: 5

Sometimes I have useful connectivity for a while, possibly
associated with the state of the snapshot being run. I did not have
that today. Eventually, though, it always ends with something 
like this. The keyboard is unresponsive at this point, so I have run no
debugger commands. dmesg below signature.


My dmesg:


-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL


OpenBSD 6.4-current (GENERIC.MP) #623: Fri Jan 18 22:57:22 MST 2019
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4176125952 (3982MB)
avail mem = 4039950336 (3852MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xec530 (36 entries)
bios0: vendor AMI version "80.06" date 04/01/2015
bios0: Hewlett-Packard 550-036
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MSDM SSDT SSDT MCFG HPET SSDT
SSDT DBGP acpi0: wakeup devices PXSX(S4) RP01(S4) PXSX(S4) PXSX(S4)
PXSX(S4) RP04(S4) PXSX(S4) PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) PXSX(S4)
GLAN(S4) EHC1(S3) EHC2(S3) XHC_(S3) [...] acpitimer0 at acpi0: 3579545
Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at
mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-4170 CPU @
3.70GHz, 3691.98 MHz, 06-3c-03 cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.46 MHz, 06-3c-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.45 MHz, 06-3c-03
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.45 MHz, 06-3c-03
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,L1
cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 8 pa
0xfec0, version 20, 24 pins acpimcfg0 at acpi0
acpimcfg0: addr 0xf800, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP04)
acpiprt3 at acpi0: bus 3 (RP06)
acpiprt4 at acpi0: bus 4 (RP07)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiec0 at acpi0: not present

converting m4a files

2018-11-21 Thread Ed Ahlsen-Girard

Does anybody know of a solution that doesn't involve sending my files
(mine, I tell you, mine!) to a web site? These are not copyrighted: the
phone voice recorder app uses m4a by default, apparently.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

LibreOffice offline help

2018-08-26 Thread Ed Ahlsen-Girard

Has anyone installed offline help for LibreOffice? How does that work?
There isn't a package for it.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

LibreOffice, libGL.s0.1 and FireFox

2018-03-06 Thread Ed Ahlsen-Girard

I am now very perplexed by this issue.

Installed the March 5th snap and updated all packages, logged in,
LibreOffice does not run, cannot find libGL.so.1. Repeated attempts
are the same.

Until I run FireFox. Once I run Firefox, even if it closes,
LibreOffice can be started and run, repeatedly, until the user logs
out. Once the user logs out, LibreOffice requires a FireFox start to be
successfully run.

dmesg below.
-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL


OpenBSD 6.3-beta (GENERIC.MP) #33: Mon Mar  5 15:20:19 MST 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4176125952 (3982MB)
avail mem = 4042506240 (3855MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xdbc40018 (36 entries)
bios0: vendor AMI version "80.06" date 04/01/2015
bios0: Hewlett-Packard 550-036
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MSDM SSDT SSDT MCFG HPET SSDT SSDT DBGP
acpi0: wakeup devices PXSX(S4) RP01(S4) PXSX(S4) PXSX(S4) PXSX(S4) RP04(S4) 
PXSX(S4) PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) PXSX(S4) GLAN(S4) EHC1(S3) 
EHC2(S3) XHC_(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.95 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
acpitimer0: recalibrated TSC frequency 3691466034 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.45 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.45 MHz
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-4170 CPU @ 3.70GHz, 3691.45 MHz
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf800, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpihpet0: recalibrated TSC frequency 3691469200 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP04)
acpiprt3 at acpi0: bus 3 (RP06)
acpiprt4 at acpi0: bus 4 (RP07)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
cpu0: Enhanced

Re: Libreoffice, for about ten days, has filaed to run with a GTK error

2018-02-27 Thread Ed Ahlsen-Girard

On 2018-02-27 11:17:49, Stuart Henderson wrote
> 
> On 2018/02/25 20:12, Ed Ahlsen-Girard wrote:
> > Libreoffice, for about ten days, has filaed to run with a GTK error
> > "can't open libGL.so.1"
> > 
> > The previous fix, pkg-selete/pkg_add fails thus:
> > 
> > 
> > quirks-2.409 signed on 2018-02-23T20:57:41Z
> > Can't install libreoffice-6.0.1.1v0 because of libraries
> > |library crypto.42.7 not found
> > | /usr/lib/libcrypto.so.42.0 (system): minor is too small
> > | /usr/lib/libcrypto.so.42.1 (system): minor is too small
> > | /usr/lib/libcrypto.so.42.2 (system): minor is too small
> > | /usr/lib/libcrypto.so.42.6 (system): minor is too small
> > |library ssl.44.8 not found
> > | /usr/lib/libssl.so.44.1 (system): minor is too small
> > | /usr/lib/libssl.so.44.2 (system): minor is too small
> > | /usr/lib/libssl.so.44.3 (system): minor is too small
> > | /usr/lib/libssl.so.44.7 (system): minor is too small
> 
> OS snapshots have been behind the libssl/libcrypto versions used to
> build packages recently. New snapshots are now (today) available -
> update your base OS then run pkg_add -u then re-add libreoffice.

Yay! Installs!

Boo! Doesn't run! 

$soffice
Warning: failed to launch javaldx - java may not function correctly
Couldn't open libGL.so.1: File not found


-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

LibreOffice can't find libGL.so.1, can't reinstall

2018-02-27 Thread Ed Ahlsen-Girard

Libreoffice, for about ten days, has filaed to run with a GTK error
"can't open libGL.so.1"

The previous fix, pkg-selete/pkg_add fails thus:


quirks-2.409 signed on 2018-02-23T20:57:41Z
Can't install libreoffice-6.0.1.1v0 because of libraries
|library crypto.42.7 not found
| /usr/lib/libcrypto.so.42.0 (system): minor is too small
| /usr/lib/libcrypto.so.42.1 (system): minor is too small
| /usr/lib/libcrypto.so.42.2 (system): minor is too small
| /usr/lib/libcrypto.so.42.6 (system): minor is too small
|library ssl.44.8 not found
| /usr/lib/libssl.so.44.1 (system): minor is too small
| /usr/lib/libssl.so.44.2 (system): minor is too small
| /usr/lib/libssl.so.44.3 (system): minor is too small
| /usr/lib/libssl.so.44.7 (system): minor is too small
Direct dependencies
for .libs1-libreoffice-5.3.7.2p1v0->libreoffice-6.0.1.1v0 resolve to
lcms2-2.9 hunspell-1.6.1p2 desktop-file-utils-0.23p0 curl-7.58.0p0
libxslt-1.1.32 postgresql-client-10.2 poppler-0.59.0 gtk+2-2.24.32
xdg-utils-1.1.2p0 harfbuzz-icu-1.7.5 gtk-update-icon-cache-3.22.28
redland-1.0.17p5 neon-0.30.2p1 graphite2-1.3.10p1 python-3.6.4
icu4c-58.2p5 raptor-2.0.15p2 nss-3.35p0 cups-libs-2.2.6
shared-mime-info-1.9p0 clucene-core-2.3.3.4p2 openldap-client-2.4.45p4
glew-2.0.0 gtk+3-3.22.28 glm-0.9.8.5 boost-1.66.0 libexecinfo-0.3p0v0
Full dependency tree is graphite2-1.3.10p1 libiconv-1.14p3
cups-libs-2.2.6 gdk-pixbuf-2.36.11 at-spi2-core-2.26.2 raptor-2.0.15p2
libltdl-2.4.2p1 gdbm-1.13 gnome-icon-theme-3.12.0p3
clucene-core-2.3.3.4p2 libyajl-2.1.0 libffi-3.2.1p4 libgcrypt-1.8.2p0
libidn2-2.0.0p0 python-2.7.14p0 openjp2-2.3.0 dconf-0.26.1
harfbuzz-icu-1.7.5 libtasn1-4.13p0 poppler-data-0.4.8 avahi-0.7p1
p11-kit-0.23.2p0 redland-1.0.17p5 python-3.6.4 libxml-2.9.7
mozilla-dicts-en-GB-1.3p1 libcroco-0.6.12 librsvg-2.40.20 boost-1.66.0
libexecinfo-0.3p0v0 dbus-daemon-launch-helper-1.12.4
openldap-client-2.4.45p4 png-1.6.34 libxslt-1.1.32 libdaemon-0.14p1
gnutls-3.5.18 libelf-0.8.13p4 bzip2-1.0.6p8 hicolor-icon-theme-0.17
cyrus-sasl-2.1.26p25 dbus-1.12.4v0 jpeg-1.5.3v0 nss-3.35p0
gettext-0.19.8.1p1 gmp-6.1.2p1 libproxy-0.4.15p0 nspr-4.18 lzo2-2.10
glm-0.9.8.5 gtk+3-3.22.28 atk-2.26.1 curl-7.58.0p0 lcms2-2.9
adwaita-icon-theme-3.26.1 jasper-2.0.14 postgresql-client-10.2
gtk+2-2.24.32 neon-0.30.2p1 gtk-update-icon-cache-3.22.28
libgpg-error-1.27p1 nghttp2-1.30.0 pango-1.40.14 at-spi2-atk-2.26.1
icu4c-58.2p5 xz-5.2.3p0 pcre-8.41 gnome-icon-theme-symbolic-3.12.0p2
sqlite3-3.21.0 shared-mime-info-1.9p0 glew-2.0.0 e2fsprogs-1.42.12p4
glib2-2.54.3p1 mpfr-3.1.5.2 desktop-file-utils-0.23p0 libnettle-3.4
rasqal-0.9.33p2 hunspell-1.6.1p2 cairo-1.14.12 poppler-0.59.0
libunistring-0.9.7 xdg-utils-1.1.2p0 tiff-4.0.9 harfbuzz-1.7.5 Couldn't
find updates for .libs1-libreoffice-5.3.7.2p1v0


-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: LibreOffice, fail after upgrade

2017-08-02 Thread Ed Ahlsen-Girard

On Mon, 31 Jul 2017 23:05:42 +0100
Stuart Henderson <s...@spacehopper.org> wrote:

> Which mirror is it? Best to check the timestamps in the mirror's
> directory listing and make sure they're all fairly close together -
> the mixture of packages built against two different versions of
> freetype definitely indicates a problem.
> 
> 
> 
> On 31 July 2017 12:56:35 Ed Ahlsen-Girard <eagir...@cox.net> wrote:
> 
>  [...]  
>  [...]  
>  [...]  
> 
> 

I'm using mirrors.sonic.net, and the timestamps are all in an eight
minute window.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: LibreOffice, fail after upgrade

2017-08-01 Thread Ed Ahlsen-Girard

On Mon, 31 Jul 2017 09:33:49 +0100
Stuart Henderson <s...@spacehopper.org> wrote:

> On 2017/07/30 11:16, Ed Ahlsen-Girard wrote:
>  [...]  
> 
> This mixture of two versions of libfreetype shows that you haven't
> updated all packages. Whenever you update to a newer snapshot, you
> ought to run pkg_add -u.
> 
> For this particular update, you moved between gcc-compiled packages
> and clang-compiled packages, in this case you need to add "-D
> installed" as well. See
> http://www.openbsd.org/faq/current.html#r20170729
> 
> However then you will run into the problem mentioned at
> http://marc.info/?t=15014228763=1=2 - a fix has been committed
> but packages with this won't be available just yet, however the dirty
> workaround I suggested there might help until they're ready.
> 

I run pkg_add -u after every upgrade. Packages on my mirror are showing
a July 29 date. Perhaps it's slow.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Firefox fails after July 29 snap

2017-07-31 Thread Ed Ahlsen-Girard

Installed July 29 snap and upgraded packages, firefox dies:


ed@foop(~)$firefox
firefox:/usr/local/lib/libicuuc.so.13.0: /usr/local/lib/libicudata.so.13.0 :
WARNING: symbol(icudt58_dat) size mismatch, relink your program
firefox:/usr/local/lib/libcairo.so.12.3: undefined symbol
'__popcountdi2' ld.so: firefox: lazy binding failed! Killed 
-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL
OpenBSD 6.1-current (GENERIC.MP) #18: Sat Jul 29 10:17:57 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4242014208 (4045MB)
avail mem = 4107096064 (3916MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06d0 (43 entries)
bios0: vendor American Megatrends Inc. version "0504" date 10/05/2009
bios0: ASUSTeK Computer INC. P-P5G41
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4) USB0(S4) 
USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4) P0P6(S4) 
P0P7(S4) P0P8(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2933.71 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF
cpu0: 3MB 64b/line 8-way L2 cache
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2933.30 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF
cpu1: 3MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus -1 (P0P3)
acpiprt3 at acpi0: bus 3 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 2 (P0P6)
acpiprt6 at acpi0: bus 1 (P0P7)
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM
aibs0: FSIF: invalid package
"PNP0303" at acpi0 not configured
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2933 MHz: speeds: 2936, 2670, 2403, 2136, 1870, 1603 
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel G41 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel G41 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe000, size 0x1000
inteldrm0: msi
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel G41 Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 3
xhci0 at pci1 dev 0 function 0 vendor "Fresco Logic", unknown product 0x1100 
rev 0x01: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Fresco Logic xHCI root hub" rev 
3.00/1.00 addr 1
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c00), 
msi, address 48:5b:39:c5:63:95
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: msi
pci3 at ppb2 bus 1
vendor "VIA", unknown product 0x3401 (class serial bus subclass Firewire, rev 
0x00) at pci3 dev 0 function 0 not configured
vendor "VIA", unknown product 0x401a (class mass storage subclass 
miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 vendor "VIA", unknown product 0x401b rev 0x00: 
apic 2 int 19
sdhc0: SDHC 1.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31

LibreOffice, fail after upgrade

2017-07-30 Thread Ed Ahlsen-Girard

AFter upgrading to the July 29 snap (and upgrading packages)
LibreOffice will not start.

Errors here, dmesg after signature.

[my prompt]soffice
Warning: failed to launch javaldx - java may not function correctly
soffice.bin:/usr/X11R6/lib/libfreetype.so.28.1: 
/usr/X11R6/lib/libfreetype.so.27.0 :
WARNING: symbol(af_blue_strings) size mismatch, relink your program
soffice.bin:/usr/X11R6/lib/libfreetype.so.28.1: 
/usr/X11R6/lib/libfreetype.so.27.0 :
WARNING: symbol(af_script_classes) size mismatch, relink your program
soffice.bin:/usr/X11R6/lib/libfreetype.so.28.1: 
/usr/X11R6/lib/libfreetype.so.27.0 :
WARNING: symbol(af_blue_stringsets) size mismatch, relink your program
soffice.bin:/usr/X11R6/lib/libfreetype.so.28.1: 
/usr/X11R6/lib/libfreetype.so.27.0 :
WARNING: symbol(af_style_classes) size mismatch, relink your program
soffice.bin:/usr/local/lib/libicuuc.so.13.0: /usr/local/lib/libicudata.so.11.0 :
WARNING: symbol(icudt58_dat) size mismatch, relink your program
soffice.bin:/usr/local/lib/libreoffice/program/libfwilo.so: 
/usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv117__class_type_infoE) size mismatch,
relink your program
soffice.bin:/usr/local/lib/libreoffice/program/libfwilo.so: 
/usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv120__si_class_type_infoE) size
mismatch, relink your program
soffice.bin:/usr/local/lib/libreoffice/program/libfwilo.so: 
/usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv121__vmi_class_type_infoE) size
mismatch, relink your program
soffice.bin:/usr/local/lib/libreoffice/program/libcppcanvaslo.so: 
/usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv117__class_type_infoE) size mismatch,
relink your program
soffice.bin:/usr/local/lib/libreoffice/program/libcppcanvaslo.so: 
/usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv120__si_class_type_infoE) size
mismatch, relink your program
soffice.bin:/usr/local/lib/libreoffice/program/libcppcanvaslo.so: 
/usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv121__vmi_class_type_infoE) size
mismatch, relink your program
soffice.bin:/usr/local/lib/libreoffice/program/libcanvastoolslo.so: 
/usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv117__class_type_infoE) size mismatch,
relink your program
soffice.bin:/usr/local/lib/libreoffice/program/libcanvastoolslo.so: 
/usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv120__si_class_type_infoE) size
mismatch, relink your program
soffice.bin:/usr/local/lib/libreoffice/program/libcanvastoolslo.so: 
/usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv121__vmi_class_type_infoE) size
mismatch, relink your program
soffice.bin:/usr/local/lib/libreoffice/program/libstorelo.so: 
/usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv121__vmi_class_type_infoE) size
mismatch, relink your program
soffice.bin:/usr/local/lib/libreoffice/program/libstorelo.so: 
/usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv117__class_type_infoE) size mismatch,
relink your program
soffice.bin:/usr/local/lib/libreoffice/program/libstorelo.so: 
/usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv120__si_class_type_infoE) size
mismatch, relink your program
soffice.bin:/usr/lib/libstdc++.so.57.0: /usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv120__si_class_type_infoE) size
mismatch, relink your program
soffice.bin:/usr/lib/libstdc++.so.57.0: /usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv121__vmi_class_type_infoE) size
mismatch, relink your program
soffice.bin:/usr/lib/libstdc++.so.57.0: /usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv117__class_type_infoE) size mismatch,
relink your program
soffice.bin:/usr/lib/libstdc++.so.57.0: /usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv119__pointer_type_infoE) size mismatch,
relink your program
soffice.bin:/usr/lib/libstdc++.so.57.0: /usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv123__fundamental_type_infoE) size
mismatch, relink your program
soffice.bin:/usr/lib/libstdc++.so.57.0: /usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv129__pointer_to_member_type_infoE) size
mismatch, relink your program
soffice.bin:/usr/lib/libstdc++.so.57.0: /usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVSt9type_info) size mismatch, relink your program
soffice.bin:/usr/lib/libstdc++.so.57.0: /usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv117__pbase_type_infoE) size mismatch,
relink your program
soffice.bin:/usr/lib/libstdc++.so.57.0: /usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv117__array_type_infoE) size mismatch,
relink your program
soffice.bin:/usr/lib/libstdc++.so.57.0: /usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv116__enum_type_infoE) size mismatch,
relink your program
soffice.bin:/usr/lib/libstdc++.so.57.0: /usr/lib/libc++abi.so.0.0 :
WARNING: symbol(_ZTVN10__cxxabiv120__function_type_infoE) size
mismatch, relink your program

e: LibreOffice Crash if started other than opening a document

2017-05-23 Thread Ed Ahlsen-Girard

> From:   Ed Ahlsen-Girard 
> Date:   2017-01-12 12:27:55
> Message-ID: 20170112062755.15f180c5 () foop ! my ! domain
> [Download message RAW]
> 
> On Wed, 11 Jan 2017 12:51:12 +0100
> David Coppa <dco...@gmail.com> wrote:
> 
> > On Wed, Jan 11, 2017 at 11:55 AM, Robert Nagy <rob...@openbsd.org>
> > wrote: [...]  
> > 
> > Or you can try with wmname.
> > 
> > Install wmname with 'pkg_add wmname'
> > 
> > And then put:
> > 
> > /usr/local/bin/wmname LG3D
> > 
> > into your ~/.xinitrc right before the line that exec your window
> > manager...
> > 
> > Ciao!
> > David
> > 
> >  [...]  
> >  [...]  
> >  [...]  
> >  [...]  
> >  [...]  
> >  [...]  
> > 
> > 
> > 
> 
> That did the trick. Thank you.
> 
> -- 
> 
> Edward Ahlsen-Girard
> Ft Walton Beach, FL

Well, it doesn't do the trick anymore. Upstream I got a recommendation
to install 32 bit Java. Even if I had a clear idea of how to do that,
I'm not sure I'd want to.
-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: LibreOffice Crash if started other than opening a document

2017-01-12 Thread Ed Ahlsen-Girard

On Wed, 11 Jan 2017 11:55:02 +0100
Robert Nagy <rob...@openbsd.org> wrote:

> Try a different window manager.
> 
> On (2017-01-09 18:28), Ed Ahlsen-Girard wrote:
>  [...]  
>  [...]  
>  [...]  
>  [...]  

Switching to fvwm and leaving the profile directory in place, same
results. After deleting the profile directory, LibreOffice starts
normally and started normally again after shutting it down (so that a
new profile was in place).

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: LibreOffice Crash if started other than opening a document

2017-01-12 Thread Ed Ahlsen-Girard

On Wed, 11 Jan 2017 12:51:12 +0100
David Coppa  wrote:

> On Wed, Jan 11, 2017 at 11:55 AM, Robert Nagy 
> wrote: [...]  
> 
> Or you can try with wmname.
> 
> Install wmname with 'pkg_add wmname'
> 
> And then put:
> 
> /usr/local/bin/wmname LG3D
> 
> into your ~/.xinitrc right before the line that exec your window
> manager...
> 
> Ciao!
> David
> 
>  [...]  
>  [...]  
>  [...]  
>  [...]  
>  [...]  
>  [...]  
> 
> 
> 

That did the trick. Thank you.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: LibreOffice Crash if started other than opening a document

2017-01-10 Thread Ed Ahlsen-Girard

> I had similar issue, was not even aware of it. For me following
> command makes it work again:
> 
>   rm -rf ~/.config/libreoffice
> 
> It was on:
> 
> OpenBSD 6.0-current (GENERIC.MP) #97: Tue Jan  3 00:47:09 MST 2017
> bu...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> 
> with libreoffice-5.2.4.2p0v0 packaged at 2017-01-05T14:48:47Z
> 
> 
> On Thu, Jan 05, 2017 at 09:30:08PM -0600, Ed Ahlsen-Girard wrote:
> > First message December 21, no replies. Text below is the Document
> > Foundation bugzilla bug and exchange with developers there.
> > 
> > I'm baffled that nobody else seems to has seen this.
> > 
> > Description:
> > If LibreOffice is opened from the command line or from the cwm start
> > menu, it displays a dialog box to the effect that due to an
> > unexpected error, LibreOffice crashed, that documents that had been
> > open will be recovered. In the case when there had not be a real
> > crash, the are no files in the list to choose recovery for. Closing
> > the dialog box ends the program. If the command line is used, this
> > error appears in the terminal window: Warning: failed to launch
> > javaldx - java may not function correctly
> ...
> 
> -- 
> best regards
> q#

Thanks, I've tried that, and it works the first time. The issue always
comes back.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

LibreOffice Crash if started other than opening a document

2017-01-06 Thread Ed Ahlsen-Girard

First message December 21, no replies. Text below is the Document
Foundation bugzilla bug and exchange with developers there.

I'm baffled that nobody else seems to has seen this.

Description:
If LibreOffice is opened from the command line or from the cwm start
menu, it displays a dialog box to the effect that due to an unexpected
error, LibreOffice crashed, that documents that had been open will be
recovered. In the case when there had not be a real crash, the are no
files in the list to choose recovery for. Closing the dialog box ends
the program. If the command line is used, this error appears in the
terminal window: Warning: failed to launch javaldx - java may not
function correctly

A dmesg (sanitized) is included.

Steps to Reproduce:
1. Run soffice without a filename as an argument.
2. Wait.
3. It will come

Actual Results:  
Crashes: can only be run by opening a document

Expected Results:
crashed, had to open a document


Reproducible: Always

User Profile Reset: Yes

Additional Info:
OpenBSD 6.0-current (GENERIC.MP) #87: Thu Dec 29 22:12:14 MST 2016
bu...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4242014208 (4045MB)
avail mem = 4108795904 (3918MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06d0 (43 entries)
bios0: vendor American Megatrends Inc. version "0504" date 10/05/2009
bios0: ASUSTeK Computer INC. P-P5G41
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4)
USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4)
P0P6(S4) P0P7(S4) P0P8(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24
bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0:
apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @
2.93GHz, 2933.69 MHz cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2933.30 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus -1 (P0P3)
acpiprt3 at acpi0: bus 3 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 2 (P0P6)
acpiprt6 at acpi0: bus 1 (P0P7)
acpicpu0 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM
aibs0: FSIF: invalid package
"PNP0501" at acpi0 not configured
"PNP0303" at acpi0 not configured
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2933 MHz: speeds: 2936, 2670, 2403, 2136,
1870, 1603 MHz pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel G41 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel G41 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe000, size 0x1000
inteldrm0: msi
inteldrm0: 1920x1080
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel G41 Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 3
xhci0 at pci1 dev 0 function 0 vendor "Fresco Logic", unknown product
0x1100 rev 0x01: msi usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Fresco Logic xHCI root hub"
rev 3.00/1.00 addr 1 ppb1 at pci0 dev 28 function 2 "Intel 82801GB
PCIE" rev 0x01: msi pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C
(0x3c00), msi, address 48:5b:39:c5:63:95 rgephy0 at re0 phy 7:
RTL8169S/8110S/8211 PHY, rev. 2 ppb2 at pci0 dev 28 function 3 "Intel
82801GB PCIE" rev 0x01: msi pci3 at ppb2 bus 1
vendor "VIA", unknown product 0x3401 (class serial bus subclass
Firewire, rev 0x00) at pci3 dev 0 function 0 not configured vendor
"VIA", unknown product 0x401a (class mass storage subclass
miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured sdhc0
at pci3 dev 0

spurious crash dialog box, fail to start

2016-12-21 Thread Ed Ahlsen-Girard

I run the version from -current (version: 5.2.2.2.0+ Build ID:
20m0(Build:2)) and for some time now, if I start LibreOffice by itself,
without a file specified, I receive a Document Recovery dialog box to
the effect that LibreOffice crashed and was going to try to recover
documents, with no documents listed. If a file is passed as a
command line argument or as the run action specified for the file type
in rox-filer, all is well. I have deleted the user profile, but that
has no effect.

Is this a known problem or just me?

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Fw: minidlna

2016-08-28 Thread Ed Ahlsen-Girard

On Thu, 25 Aug 2016 14:24:43 +0100
Stuart Henderson  wrote:

 [...]  

Yes, it's a poor report, but when I saw no manual I wanted to make sure
that it was still a package before proceeding further.

Lack of manual was fixed by fixing a typo in a "is there a newer
snapshot? let's get the sets ahead of time!" cron job. The manual
states that minidlna runs as user nobody, but that doesn't match the
installation.

Starting manually, it works. But only manually. dmesg, logs, config
files below sig.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

OpenBSD 5.8-current (GENERIC.MP) #1568: Wed Nov  4 20:48:36 MST 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4242014208 (4045MB)
avail mem = 4109324288 (3918MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06d0 (43 entries)
bios0: vendor American Megatrends Inc. version "0504" date 10/05/2009
bios0: ASUSTeK Computer INC. P-P5G41
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4)
PS2M(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4)
P0P5(S4) P0P6(S4) P0P7(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24
bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0:
apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @
2.93GHz, 2933.71 MHz cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 277MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 3050.63 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus -1 (P0P3)
acpiprt3 at acpi0: bus 3 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 2 (P0P6)
acpiprt6 at acpi0: bus 1 (P0P7)
acpicpu0 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM
aibs0: FSIF: invalid package
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2933 MHz: speeds: 2936, 2670, 2403, 2136,
1870, 1603 MHz pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel G41 Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel G41 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe000, size 0x1000
inteldrm0: msi
inteldrm0: 1920x1080
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel G41 Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 3
xhci0 at pci1 dev 0 function 0 vendor "Fresco Logic", unknown product
0x1100 rev 0x01: msi usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Fresco Logic xHCI root hub" rev 3.00/1.00 addr 1
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C
(0x3c00), msi, address 48:5b:39:c5:63:95 rgephy0 at re0 phy 7:
RTL8169S/8110S/8211 PHY, rev. 2 ppb2 at pci0 dev 28 function 3 "Intel
82801GB PCIE" rev 0x01: msi pci3 at ppb2 bus 1
vendor "VIA", unknown product 0x3401 (class serial bus subclass
Firewire, rev 0x00) at pci3 dev 0 function 0 not configured vendor
"VIA", unknown product 0x401a (class mass storage subclass
miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured sdhc0
at pci3 dev 0 function 2 vendor "VIA", unknown product 0x401b rev 0x00:
apic 2 int 19 sdhc0 at 0x10: can't map registers uhci0 at pci0 dev 29
function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23 uhci1 at pci0
dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19 uhci2 at
pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2
int 16 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01:
apic 2 int 23 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 "Intel

minidlna

2016-08-22 Thread Ed Ahlsen-Girard

While attempting to trouble shoot minidlna (21 Aug 2016 snap) I found
that the package has no docs, either as minidlna, minidlnad, or
readymedia. Checked for man and info pages both. In addition to not
running on my machine.

Is it being abandoned?

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: LibreOffice trouble

2015-10-30 Thread Ed Ahlsen-Girard

On Fri, 31 Jul 2015 21:02:38 -0500
Ed Ahlsen-Girard <eagir...@cox.net> wrote:

> On Wed, 29 Jul 2015 04:58:42 +0300
> Vadim Zhukov <persg...@gmail.com> wrote:
> 
>  [...]  
>  [...]  
>  [...]  
> 
> Fix was back up user defined templates, remove .config/libreoffice,
> reinstall.
> 

Repeated this morning to fix after the October 28 snap.

Surprisingly, the dialog box to import the templates refused to close,
and captured the mouse whenever focus was set to LibreOffice at all.
Had to kill the process.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: LibreOffice trouble

2015-10-30 Thread Ed Ahlsen-Girard

On Fri, 30 Oct 2015 14:28:55 +
"Dahlberg, David" <david.dahlb...@fkie.fraunhofer.de> wrote:

> Am Freitag, den 30.10.2015, 09:02 -0500 schrieb Ed Ahlsen-Girard:
>  [...]  
>  [...]  
> 
> I had some similar experiences on Debian Testing. Do you think, it is
> particularly related to the OpenBSD port? Otherwise, you should
> probably go upstream with that issue. (I am sure, they'll fix that
> bug and add another one which is equally annoying.)
> 
>  [...]  
> 
> In my case (if it was the same) there were no buttons to close that
> dialog box, but I could still escape by pressing "Esc".

ESC didn't work.
-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Firefox 41.0.2 with W^X

2015-10-22 Thread Ed Ahlsen-Girard

I have noticed a performance hit since the switch was flipped. Firefox
stays at the top of top most of the time, and its CPU percentages have
spiked to 175% if multiple tabs were being opened. dmesg below the sig.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

OpenBSD 5.8-current (GENERIC.MP) #1537: Tue Oct 20 09:44:09 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4242014208 (4045MB)
avail mem = 4109324288 (3918MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06d0 (43 entries)
bios0: vendor American Megatrends Inc. version "0504" date 10/05/2009
bios0: ASUSTeK Computer INC. P-P5G41
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4) PS2M(S4) 
USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4) 
P0P6(S4) P0P7(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2933.70 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2933.30 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus -1 (P0P3)
acpiprt3 at acpi0: bus 3 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 2 (P0P6)
acpiprt6 at acpi0: bus 1 (P0P7)
acpicpu0 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM
aibs0: FSIF: invalid package
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2933 MHz: speeds: 2936, 2670, 2403, 2136, 1870, 1603 
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel G41 Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel G41 Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe000, size 0x1000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel G41 Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 3
xhci0 at pci1 dev 0 function 0 vendor "Fresco Logic", unknown product 0x1100 
rev 0x01: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Fresco Logic xHCI root hub" rev 3.00/1.00 addr 1
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C (0x3c00), 
msi, address 48:5b:39:c5:63:95
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: msi
pci3 at ppb2 bus 1
vendor "VIA", unknown product 0x3401 (class serial bus subclass Firewire, rev 
0x00) at pci3 dev 0 function 0 not configured
vendor "VIA", unknown product 0x401a (class mass storage subclass 
miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 vendor "VIA", unknown product 0x401b rev 0x00: 
apic 2 int 19
sdhc0 at 0x10: can't map registers
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 
configured to compatibility,

Reading PST (Outlook) files

2015-10-14 Thread Ed Ahlsen-Girard

What, in BSD land, can read Outlook data files?

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: LibreOffice trouble

2015-07-31 Thread Ed Ahlsen-Girard

On Wed, 29 Jul 2015 04:58:42 +0300
Vadim Zhukov persg...@gmail.com wrote:

 2015-07-29 2:48 GMT+03:00 Ed Ahlsen-Girard eagir...@cox.net:
  Starting LibreOffice (from snapshots) with no arguments fails with
  this error:
 
  LibreOffice 4.4 - Fatal Error
 
  The application cannot be started.
  User installation could not be completed.
 
  dmesg below.
 
  --
 
  Edward Ahlsen-Girard
  Ft Walton Beach, FL
 
  OpenBSD 5.8 (GENERIC.MP) #1193: Fri Jul 24 12:17:54 MDT 2015
  dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
  real mem = 2094530560 (1997MB)
  avail mem = 2027216896 (1933MB)
  mpath0 at root
  scsibus0 at mpath0: 256 targets
  mainbus0 at root
  bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06d0 (43 entries)
  bios0: vendor American Megatrends Inc. version 0504 date
  10/05/2009 bios0: ASUSTeK Computer INC. P-P5G41
  acpi0 at bios0: rev 2
  acpi0: sleep states S0 S1 S3 S4 S5
  acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
  acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4)
  PS2M(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4)
  P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) [...] acpitimer0 at acpi0:
  3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT
  compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R)
  Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2933.67 MHz cpu0:
  FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
  cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0
  mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
  cpu0: apic clock running at 271MHz
  cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
  cpu1 at mainbus0: apid 1 (application processor)
  cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2991.97 MHz
  cpu1:
  FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
  cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0
  ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
  acpimcfg0 at acpi0 addr 0xf000, bus 0-63
  acpihpet0 at acpi0: 14318179 Hz
  acpiprt0 at acpi0: bus 0 (PCI0)
  acpiprt1 at acpi0: bus -1 (P0P2)
  acpiprt2 at acpi0: bus -1 (P0P3)
  acpiprt3 at acpi0: bus 3 (P0P4)
  acpiprt4 at acpi0: bus -1 (P0P5)
  acpiprt5 at acpi0: bus 2 (P0P6)
  acpiprt6 at acpi0: bus 1 (P0P7)
  acpicpu0 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
  acpicpu1 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
  aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM
  aibs0: FSIF: invalid package
  acpibtn0 at acpi0: PWRB
  cpu0: Enhanced SpeedStep 2933 MHz: speeds: 2936, 2670, 2403, 2136,
  1870, 1603 MHz pci0 at mainbus0 bus 0
  pchb0 at pci0 dev 0 function 0 Intel G41 Host rev 0x03
  vga1 at pci0 dev 2 function 0 Intel G41 Video rev 0x03
  intagp0 at vga1
  agp0 at intagp0: aperture at 0xe000, size 0x1000
  inteldrm0 at vga1
  drm0 at inteldrm0
  inteldrm0: 1920x1080
  wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
  wsdisplay0: screen 1-5 added (std, vt100 emulation)
  Intel G41 Video rev 0x03 at pci0 dev 2 function 1 not configured
  azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev
  0x01: msi azalia0: codecs: Realtek ALC888
  audio0 at azalia0
  ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01: msi
  pci1 at ppb0 bus 3
  xhci0 at pci1 dev 0 function 0 vendor Fresco Logic, unknown
  product 0x1100 rev 0x01: msi usb0 at xhci0: USB revision 3.0
  uhub0 at usb0 Fresco Logic xHCI root hub rev 3.00/1.00 addr 1
  ppb1 at pci0 dev 28 function 2 Intel 82801GB PCIE rev 0x01: msi
  pci2 at ppb1 bus 2
  re0 at pci2 dev 0 function 0 Realtek 8168 rev 0x02:
  RTL8168C/8111C (0x3c00), msi, address 48:5b:39:c5:63:95 rgephy0 at
  re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2 ppb2 at pci0 dev 28
  function 3 Intel 82801GB PCIE rev 0x01: msi pci3 at ppb2 bus 1
  vendor VIA, unknown product 0x3401 (class serial bus subclass
  Firewire, rev 0x00) at pci3 dev 0 function 0 not configured vendor
  VIA, unknown product 0x401a (class mass storage subclass
  miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured
  sdhc0 at pci3 dev 0 function 2 vendor VIA, unknown product 0x401b
  rev 0x00: apic 2 int 19 sdhc0 at 0x10: can't map registers uhci0 at
  pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: apic 2 int 23
  uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x01: apic
  2 int 19 uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev
  0x01: apic 2 int 18 uhci3 at pci0 dev 29 function 3 Intel 82801GB
  USB rev 0x01: apic 2 int 16 ehci0 at pci0 dev 29 function 7 Intel
  82801GB USB rev 0x01: apic 2 int 23 usb1 at ehci0: USB revision
  2.0 uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb3
  at pci0

Re: LibreOffice trouble

2015-07-28 Thread Ed Ahlsen-Girard

On Wed, 29 Jul 2015 04:58:42 +0300
Vadim Zhukov persg...@gmail.com wrote:

 2015-07-29 2:48 GMT+03:00 Ed Ahlsen-Girard eagir...@cox.net:
  Starting LibreOffice (from snapshots) with no arguments fails with
  this error:
 
  LibreOffice 4.4 - Fatal Error
 
  The application cannot be started.
  User installation could not be completed.
 
  dmesg below.
 
  --
 
  Edward Ahlsen-Girard
  Ft Walton Beach, FL
 
  OpenBSD 5.8 (GENERIC.MP) #1193: Fri Jul 24 12:17:54 MDT 2015
  dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
  real mem = 2094530560 (1997MB)
  avail mem = 2027216896 (1933MB)
  mpath0 at root
  scsibus0 at mpath0: 256 targets
  mainbus0 at root
  bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06d0 (43 entries)
  bios0: vendor American Megatrends Inc. version 0504 date
  10/05/2009 bios0: ASUSTeK Computer INC. P-P5G41
  acpi0 at bios0: rev 2
  acpi0: sleep states S0 S1 S3 S4 S5
  acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
  acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4)
  PS2M(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4)
  P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) [...] acpitimer0 at acpi0:
  3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT
  compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R)
  Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2933.67 MHz cpu0:
  FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
  cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0
  mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
  cpu0: apic clock running at 271MHz
  cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
  cpu1 at mainbus0: apid 1 (application processor)
  cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2991.97 MHz
  cpu1:
  FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
  cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0
  ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
  acpimcfg0 at acpi0 addr 0xf000, bus 0-63
  acpihpet0 at acpi0: 14318179 Hz
  acpiprt0 at acpi0: bus 0 (PCI0)
  acpiprt1 at acpi0: bus -1 (P0P2)
  acpiprt2 at acpi0: bus -1 (P0P3)
  acpiprt3 at acpi0: bus 3 (P0P4)
  acpiprt4 at acpi0: bus -1 (P0P5)
  acpiprt5 at acpi0: bus 2 (P0P6)
  acpiprt6 at acpi0: bus 1 (P0P7)
  acpicpu0 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
  acpicpu1 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
  aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM
  aibs0: FSIF: invalid package
  acpibtn0 at acpi0: PWRB
  cpu0: Enhanced SpeedStep 2933 MHz: speeds: 2936, 2670, 2403, 2136,
  1870, 1603 MHz pci0 at mainbus0 bus 0
  pchb0 at pci0 dev 0 function 0 Intel G41 Host rev 0x03
  vga1 at pci0 dev 2 function 0 Intel G41 Video rev 0x03
  intagp0 at vga1
  agp0 at intagp0: aperture at 0xe000, size 0x1000
  inteldrm0 at vga1
  drm0 at inteldrm0
  inteldrm0: 1920x1080
  wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
  wsdisplay0: screen 1-5 added (std, vt100 emulation)
  Intel G41 Video rev 0x03 at pci0 dev 2 function 1 not configured
  azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev
  0x01: msi azalia0: codecs: Realtek ALC888
  audio0 at azalia0
  ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01: msi
  pci1 at ppb0 bus 3
  xhci0 at pci1 dev 0 function 0 vendor Fresco Logic, unknown
  product 0x1100 rev 0x01: msi usb0 at xhci0: USB revision 3.0
  uhub0 at usb0 Fresco Logic xHCI root hub rev 3.00/1.00 addr 1
  ppb1 at pci0 dev 28 function 2 Intel 82801GB PCIE rev 0x01: msi
  pci2 at ppb1 bus 2
  re0 at pci2 dev 0 function 0 Realtek 8168 rev 0x02:
  RTL8168C/8111C (0x3c00), msi, address 48:5b:39:c5:63:95 rgephy0 at
  re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2 ppb2 at pci0 dev 28
  function 3 Intel 82801GB PCIE rev 0x01: msi pci3 at ppb2 bus 1
  vendor VIA, unknown product 0x3401 (class serial bus subclass
  Firewire, rev 0x00) at pci3 dev 0 function 0 not configured vendor
  VIA, unknown product 0x401a (class mass storage subclass
  miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured
  sdhc0 at pci3 dev 0 function 2 vendor VIA, unknown product 0x401b
  rev 0x00: apic 2 int 19 sdhc0 at 0x10: can't map registers uhci0 at
  pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: apic 2 int 23
  uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x01: apic
  2 int 19 uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev
  0x01: apic 2 int 18 uhci3 at pci0 dev 29 function 3 Intel 82801GB
  USB rev 0x01: apic 2 int 16 ehci0 at pci0 dev 29 function 7 Intel
  82801GB USB rev 0x01: apic 2 int 23 usb1 at ehci0: USB revision
  2.0 uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb3
  at pci0

LibreOffice trouble

2015-07-28 Thread Ed Ahlsen-Girard

Starting LibreOffice (from snapshots) with no arguments fails with this
error:

LibreOffice 4.4 - Fatal Error

The application cannot be started.
User installation could not be completed.

dmesg below.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

OpenBSD 5.8 (GENERIC.MP) #1193: Fri Jul 24 12:17:54 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2094530560 (1997MB)
avail mem = 2027216896 (1933MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06d0 (43 entries)
bios0: vendor American Megatrends Inc. version 0504 date 10/05/2009
bios0: ASUSTeK Computer INC. P-P5G41
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4) PS2M(S4) 
USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4) 
P0P6(S4) P0P7(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2933.67 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 271MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2991.97 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus -1 (P0P3)
acpiprt3 at acpi0: bus 3 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 2 (P0P6)
acpiprt6 at acpi0: bus 1 (P0P7)
acpicpu0 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM
aibs0: FSIF: invalid package
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2933 MHz: speeds: 2936, 2670, 2403, 2136, 1870, 1603 
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 Intel G41 Host rev 0x03
vga1 at pci0 dev 2 function 0 Intel G41 Video rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe000, size 0x1000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1920x1080
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
Intel G41 Video rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev 0x01: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01: msi
pci1 at ppb0 bus 3
xhci0 at pci1 dev 0 function 0 vendor Fresco Logic, unknown product 0x1100 
rev 0x01: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 Fresco Logic xHCI root hub rev 3.00/1.00 addr 1
ppb1 at pci0 dev 28 function 2 Intel 82801GB PCIE rev 0x01: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 Realtek 8168 rev 0x02: RTL8168C/8111C (0x3c00), 
msi, address 48:5b:39:c5:63:95
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
ppb2 at pci0 dev 28 function 3 Intel 82801GB PCIE rev 0x01: msi
pci3 at ppb2 bus 1
vendor VIA, unknown product 0x3401 (class serial bus subclass Firewire, rev 
0x00) at pci3 dev 0 function 0 not configured
vendor VIA, unknown product 0x401a (class mass storage subclass 
miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 vendor VIA, unknown product 0x401b rev 0x00: 
apic 2 int 19
sdhc0 at 0x10: can't map registers
uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x01: apic 2 int 19
uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x01: apic 2 int 16
ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x01: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0xe1
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 Intel 82801GB LPC rev 0x01
pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x01: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)

rox-filer open as text and Vi's standard input and output must be a terminal

2015-03-29 Thread Ed Ahlsen-Girard

Until recently, open as text from the right click menu of rox-filer
worked. Is the rox port taking changes from upstream?

Not anymore: returns ex/vi: Vi's standard input and output must be a
terminal.

The mime-types set to other applications work. Just not vi. This is
since the Feb 28 or so snapshot though that of March 26.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

rox trouble after changing disks

2015-03-12 Thread Ed Ahlsen-Girard

After partitioning a new disk and dump/restoring the data of all
partitions in the old to their successors in the new, Set RUn Action
and Open As Text do not work. I uninstalled rox-filer, deleted the
~/.config/rox.sourceforge.net directory and reinstalled to try creating
the run actions again. No luck.

Additionally, the link on the Rox page to create an account with which
to comment seems well hidden.

What is going on? Upgrading from the 22 Feb snapshot to 8 March has not
helped either.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL
OpenBSD 5.7 (GENERIC.MP) #881: Sun Mar  8 11:04:17 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2094530560 (1997MB)
avail mem = 2034913280 (1940MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06d0 (43 entries)
bios0: vendor American Megatrends Inc. version 0504 date 10/05/2009
bios0: ASUSTeK Computer INC. P-P5G41
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4) PS2M(S4) 
USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4) 
P0P6(S4) P0P7(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 3520.34 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2933.30 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus -1 (P0P3)
acpiprt3 at acpi0: bus 3 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 2 (P0P6)
acpiprt6 at acpi0: bus 1 (P0P7)
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM
aibs0: FSIF: invalid package
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 3520 MHz: speeds: 2936, 2670, 2403, 2136, 1870, 1603 
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 Intel G41 Host rev 0x03
vga1 at pci0 dev 2 function 0 Intel G41 Video rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe000, size 0x1000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1920x1080
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
Intel G41 Video rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev 0x01: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01: msi
pci1 at ppb0 bus 3
ppb1 at pci0 dev 28 function 2 Intel 82801GB PCIE rev 0x01: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 Realtek 8168 rev 0x02: RTL8168C/8111C (0x3c00), 
msi, address 48:5b:39:c5:63:95
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb2 at pci0 dev 28 function 3 Intel 82801GB PCIE rev 0x01: msi
pci3 at ppb2 bus 1
vendor VIA, unknown product 0x3401 (class serial bus subclass Firewire, rev 
0x00) at pci3 dev 0 function 0 not configured
vendor VIA, unknown product 0x401a (class mass storage subclass 
miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 vendor VIA, unknown product 0x401b rev 0x00: 
apic 2 int 19
sdhc0 at 0x10: can't map registers
uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x01: apic 2 int 19
uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x01: apic 2 int 16
ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x01: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0xe1
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 Intel 82801GB LPC rev 0x01
pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x01: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled

Re: Libreoffice shuts down on file save

2014-11-12 Thread Ed Ahlsen-Girard

On Mon, 10 Nov 2014 20:26:53 +
Stuart Henderson st...@openbsd.org wrote:

 On 2014/11/09 14:17, Ed Ahlsen-Girard wrote:
   From:   Robert Nagy robert () openbsd ! org
   Date:   2014-10-27 16:40:59
   Message-ID: 20141027164059.GA19617 () bsd ! hu
   [Download message RAW]

   I know about this issue and it only happens with ODF files. I am
   working on it.

  Robert,

  Is the ETR on this looking more like days or more like months?
  Months or longer I'll want to switch to different formats.

  And get nervous about sometime being unable to write to them, of
  course.

 last commit was: update to 4.3.3.2 and disable compiler optimizations
 in the svx module (for now) to allow saving ODF documents

Fails same way with Nov 10 pkg snapshot.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: Libreoffice shuts down on file save

2014-11-10 Thread Ed Ahlsen-Girard

 From:   Robert Nagy robert () openbsd ! org
 Date:   2014-10-27 16:40:59
 Message-ID: 20141027164059.GA19617 () bsd ! hu
 [Download message RAW]

 I know about this issue and it only happens with ODF files. I am
 working on it.

Robert,

Is the ETR on this looking more like days or more like months? Months
or longer I'll want to switch to different formats.

And get nervous about sometime being unable to write to them, of
course.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Libreoffice shuts down on file save

2014-10-27 Thread Ed Ahlsen-Girard

Libreoffice-4.3.2.2p0v0 from the 23 October snapshot for amd64 (and the
one before) crashes on attempting to save an ods file. Error on
starting is:

Warning: failed to launch javaldx - java may not function correctly
/usr/local/lib/libreoffice/program/soffice.bin:/usr/lib/libstdc++.so.57.0: 
/usr/local/lib/libestdc++.so.16.0 :
WARNING: symbol(_ZN11__gnu_debug17_S_debug_messagesE) size mismatch,
relink your program

dmesg below.



-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

OpenBSD 5.6-current (GENERIC.MP) #479: Sun Oct 26 01:30:08 MDT 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2094530560 (1997MB)
avail mem = 2030129152 (1936MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06d0 (43 entries)
bios0: vendor American Megatrends Inc. version 0504 date 10/05/2009
bios0: ASUSTeK Computer INC. P-P5G41
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4) PS2M(S4) 
USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4) 
P0P6(S4) P0P7(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2933.68 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 271MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2991.96 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus -1 (P0P3)
acpiprt3 at acpi0: bus 3 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 2 (P0P6)
acpiprt6 at acpi0: bus 1 (P0P7)
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM
aibs0: FSIF: invalid package
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2933 MHz: speeds: 2936, 2670, 2403, 2136, 1870, 1603 
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 Intel G41 Host rev 0x03
vga1 at pci0 dev 2 function 0 Intel G41 Video rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe000, size 0x1000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1920x1080
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
Intel G41 Video rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev 0x01: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01: msi
pci1 at ppb0 bus 3
ppb1 at pci0 dev 28 function 2 Intel 82801GB PCIE rev 0x01: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 Realtek 8168 rev 0x02: RTL8168C/8111C (0x3c00), 
msi, address 48:5b:39:c5:63:95
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb2 at pci0 dev 28 function 3 Intel 82801GB PCIE rev 0x01: msi
pci3 at ppb2 bus 1
vendor VIA, unknown product 0x3401 (class serial bus subclass Firewire, rev 
0x00) at pci3 dev 0 function 0 not configured
vendor VIA, unknown product 0x401a (class mass storage subclass 
miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 vendor VIA, unknown product 0x401b rev 0x00: 
apic 2 int 19
sdhc0 at 0x10: can't map registers
uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x01: apic 2 int 19
uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x01: apic 2 int 16
ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x01: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0xe1
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 Intel 82801GB LPC rev 0x01
pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x01: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 Intel 82801GB SATA rev

pkg_add -u fail on July 8 snap

2014-07-09 Thread Ed Ahlsen-Girard

After upgrading to the July 8 snapshot I duly ran sysmerge, then
pkg_add -u, and received this at the end of the output (preceding
output was normal):

[gcc-4.6.4p7].libs-gcc-4.6.4p4-gcc-4.8.3p0: internal conflict between 
gcc-4.8.3p0 and gcc-4.6.4p7
Can't install [gcj-4.6.4p4]gcj-4.8.3p0: can't resolve gcc-4.8.3p0
Can't install pdftk-2.02-2.02p0: can't resolve gcj-4.8.3p0
py-Pillow-2.4.0-2.4.0: ok
Read shared items: ok
Couldn't find updates for .libs-gcc-4.6.4p4, pdftk-2.02
Extracted 54077243 from 610265976

I read the follwoing -current section of the FAq before all upgrades.

dmesg below

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

OpenBSD 5.5-current (GENERIC.MP) #245: Sun Jun 29 19:19:21 MDT 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2094530560 (1997MB)
avail mem = 2030059520 (1936MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06d0 (43 entries)
bios0: vendor American Megatrends Inc. version 0504 date 10/05/2009
bios0: ASUSTeK Computer INC. P-P5G41
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4) PS2M(S4) 
USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4) 
P0P6(S4) P0P7(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2933.71 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2933.30 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus -1 (P0P3)
acpiprt3 at acpi0: bus 3 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 2 (P0P6)
acpiprt6 at acpi0: bus 1 (P0P7)
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
aibs0 at acpi0 RTMP RVLT RFAN GGRP GITM SITM
aibs0: FSIF: invalid package
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2933 MHz: speeds: 2936, 2670, 2403, 2136, 1870, 1603 
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 Intel G41 Host rev 0x03
vga1 at pci0 dev 2 function 0 Intel G41 Video rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe000, size 0x1000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1280x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
Intel G41 Video rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev 0x01: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01: msi
pci1 at ppb0 bus 3
ppb1 at pci0 dev 28 function 2 Intel 82801GB PCIE rev 0x01: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 Realtek 8168 rev 0x02: RTL8168C/8111C (0x3c00), 
msi, address 48:5b:39:c5:63:95
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb2 at pci0 dev 28 function 3 Intel 82801GB PCIE rev 0x01: msi
pci3 at ppb2 bus 1
vendor VIA, unknown product 0x3401 (class serial bus subclass Firewire, rev 
0x00) at pci3 dev 0 function 0 not configured
vendor VIA, unknown product 0x401a (class mass storage subclass 
miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 vendor VIA, unknown product 0x401b rev 0x00: 
apic 2 int 19
sdhc0 at 0x10: can't map registers
uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x01: apic 2 int 19
uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x01: apic 2 int 16
ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x01: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0xe1
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 Intel 82801GB LPC rev 0x01
pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x01:

Re: Libreoffice fails to start on -current

2013-12-14 Thread Ed Ahlsen-Girard

On Sat, Dec 07, 2013 at 9:56:21, Antoine wrote:

 On Sat, Dec 07, 2013 at 10:51:44AM +0100, Claudio wrote:
  As per title on the latest -current snapshot libreoffice fails to
  start:
  
  Warning: failed to launch javaldx - java may not function correctly
  /usr/local/lib/libreoffice/program/soffice.bin: can't load library
  'libjvmfwklo.so'
 
 IIRC the current workaround is to:
 sudo pkg_add libreoffice-java
 
 -- 
 Antoine

This workaround is not working around right now (Dec 14) using the Dec
9 packages.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

LibreOffice fails to start from 20 November snapshot with 18 November packages

2013-11-22 Thread Ed Ahlsen-Girard

LibreOffice fails to start:
ed@foop(~)$libreoffice
Warning: failed to launch javaldx - java may not function correctly\
/usr/local/lib/libreoffice/program/soffice.bin: can't load library\
'libjvmfwklo.so'

dmesg below.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL


OpenBSD 5.4-current (GENERIC.MP) #155: Wed Nov 20 12:24:39 MST 2013
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2094530560 (1997MB)
avail mem = 2030690304 (1936MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06d0 (43 entries)
bios0: vendor American Megatrends Inc. version 0504 date 10/05/2009
bios0: ASUSTeK Computer INC. P-P5G41
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4)\
PS2M(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4)
P0P5(S4) P0P6(S4) P0P7(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24
bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0:
apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @
2.93GHz, 2933.66 MHz cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,\
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,\
DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF
cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 271MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2991.98 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,\
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,\
VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF
cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus -1 (P0P3)
acpiprt3 at acpi0: bus 3 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 2 (P0P6)
acpiprt6 at acpi0: bus 1 (P0P7)
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
aibs0: FSIF: invalid package
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2933 MHz: speeds: 2936, 2670, 2403, 2136,
1870, 1603 MHz pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 Intel G41 Host rev 0x03
vga1 at pci0 dev 2 function 0 Intel G41 Video rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe000, size 0x1000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1600x900
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
Intel G41 Video rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev 0x01: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01: msi
pci1 at ppb0 bus 3
ppb1 at pci0 dev 28 function 2 Intel 82801GB PCIE rev 0x01: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 Realtek 8168 rev 0x02: RTL8168C/8111C
(0x3c00), msi, address 48:5b:39:c5:63:95 rgephy0 at re0 phy 7:
RTL8169S/8110S PHY, rev. 2 ppb2 at pci0 dev 28 function 3 Intel
82801GB PCIE rev 0x01: msi pci3 at ppb2 bus 1
vendor VIA, unknown product 0x3401 (class serial bus subclass
Firewire, rev 0x00) at pci3 dev 0 function 0 not configured vendor
VIA, unknown product 0x401a (class mass storage subclass
miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured sdhc0
at pci3 dev 0 function 2 vendor VIA, unknown product 0x401b rev 0x00:
apic 2 int 19 sdhc0 at 0x10: can't map registers uhci0 at pci0 dev 29
function 0 Intel 82801GB USB rev 0x01: apic 2 int 23 uhci1 at pci0
dev 29 function 1 Intel 82801GB USB rev 0x01: apic 2 int 19 uhci2 at
pci0 dev 29 function 2 Intel 82801GB USB rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x01: apic 2
int 16 ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x01:
apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI
root hub rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 Intel
82801BA Hub-to-PCI rev 0xe1 pci4 at ppb3 bus 4 pcib0 at pci0 dev 31
function 0 Intel 82801GB LPC rev 0x01 pciide0 at pci0 dev 31 function
1 Intel 82801GB IDE rev 0x01: DMA, channel 0 configured to
compatibility, channel 1 configured to compatibility pciide0: channel 0
disabled (no drives) pciide0: channel 1 disabled (no drives) pciide1 at
pci0 dev 31 function 2 Intel 82801GB SATA rev 0x01: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI pciide1:
using apic 2 int 19 for native-PCI interrupt wd0 at pciide1 channel 0
drive 0: SAMSUNG HM641JI wd0: 16-sector PIO, LBA48, 610480MB,
1250263728 sectors atapiscsi0 at pciide1

Minidlna docs

2013-10-17 Thread Ed Ahlsen-Girard

I just installed this package (14 October snapshot) and there's no man
page, no info page, and the README and INSTALL don't seem to have
anything about how to use the software.

Where are the docs?

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

claws-mail failure to load

2013-06-22 Thread Ed Ahlsen-Girard



Intstalled the snapshot of 20 June and updated packages. Claws failed to start.

Error on the first attemp and sometimes later:
claws: can't load library 'libheimntlm.so.0.0'

Error on second and some subsequent attempts:
claws: can't load library 'libhx509.so.0.0'

Dmesg below

--


Ed Ahlsen-Girard

OpenBSD 5.3-current (GENERIC.MP) #3: Thu Jun 20 09:46:09 MDT 2013
    t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2094530560 (1997MB)
avail mem = 2031104000 (1937MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf06d0 (43 entries)
bios0: vendor American Megatrends Inc. version 0504 date 10/05/2009
bios0: ASUSTeK Computer INC. P-P5G41
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET GSCI SSDT
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) UAR1(S4) PS2K(S4) PS2M(S4) 
USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4) P0P5(S4) 
P0P6(S4) P0P7(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 4107.06 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz, 2933.31 MHz
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus -1 (P0P3)
acpiprt3 at acpi0: bus 3 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 2 (P0P6)
acpiprt6 at acpi0: bus 1 (P0P7)
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
aibs0: FSIF: invalid package
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 4107 MHz: speeds: 2936, 2670, 2403, 2136, 1870, 1603 
MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 Intel G41 Host rev 0x03
vga1 at pci0 dev 2 function 0 Intel G41 Video rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe000, size 0x1000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1600x900
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
Intel G41 Video rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev 0x01: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01: msi
pci1 at ppb0 bus 3
ppb1 at pci0 dev 28 function 2 Intel 82801GB PCIE rev 0x01: msi
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 Realtek 8168 rev 0x02: RTL8168C/8111C (0x3c00), 
apic 2 int 18, address 48:5b:39:c5:63:95
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb2 at pci0 dev 28 function 3 Intel 82801GB PCIE rev 0x01: msi
pci3 at ppb2 bus 1
vendor VIA, unknown product 0x3401 (class serial bus subclass Firewire, rev 
0x00) at pci3 dev 0 function 0 not configured
vendor VIA, unknown product 0x401a (class mass storage subclass 
miscellaneous, rev 0x00) at pci3 dev 0 function 1 not configured
sdhc0 at pci3 dev 0 function 2 vendor VIA, unknown product 0x401b rev 0x00: 
apic 2 int 19
sdhc0 at 0x10: can't map registers
uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x01: apic 2 int 19
uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x01: apic 2 int 16
ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x01: apic 2 int 23
USB0 at ehci0: USB revision 2.0
uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0xe1
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 Intel 82801GB LPC rev 0x01
pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x01: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 Intel 82801GB SATA rev 0x01: DMA, channel 0 
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: SAMSUNG HM641JI
wd0: 16-sector PIO, LBA48, 610480MB, 1250263728 sectors
atapiscsi0 at pciide1 channel 0 drive

Java vulnerabilities and IcedTea

2013-01-13 Thread Ed Ahlsen-Girard

Do these:


Vulnerability Note VU#625617

Alert (TA13-010A)

apply to the IcedTea in packages?

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

fvwm in base

2012-08-28 Thread Ed Ahlsen-Girard

Is fvwm in base staying at 2.25 long-term, politely asked the user
incompetent to help who will not pester about this and will maybe
just try ports if the answer is yes?

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Checkboxes in Libreoffice

2011-11-13 Thread Ed Ahlsen-Girard

Updated everything to the the Nov 10 snapshot yesterday, and checkboxes
in Libreoffice are working oddly. To be specific:

Moving the cursor over a checkbox clears the checkmark, but not the
setting. Checking an apparently unchecked box toggles the setting, but
the appearance of the box remains unchanged, 

EXCEPT

if the box in question is a select all sort, in which case it WILL
visibly check and uncheck. It will also properly grey out its
dependent boxes.

I have not found any pertinent logs.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

gv hiccupping over PDFs created by gs

2011-11-06 Thread Ed Ahlsen-Girard

Printed web pages to PDF from within xxxterm. gs 9.02 from Nov 4
packages installed; gv 3.7.1 from Nov 4 packages installed.

Tried to open in gv, error shown below:

Error: /rangecheckGPL Ghostscript 9.02: Unrecoverable error, exit code 1
 in --.discardtransparencygroup--
Operand stack:
   --dict:7/16(L)--
Execution stack:
   %interp_exit   .runexec2   --nostringval--   --nostringval--
--nostringval--   2   %stopped_push   --nostringval--
--nostringval--   --nostringval--   false   1   %stopped_push   1878
1   3   %oparray_pop   1877   1   3   %oparray_pop   1861   1   3
%oparray_pop   1755   1   3   %oparray_pop   --nostringval--
%errorexec_pop   .runexec2   --nostringval--   --nostringval--
--nostringval--   2   %stopped_push   --nostringval--
--nostringval--   --nostringval--   false   1   %stopped_push
--nostringval--   --nostringval-- Dictionary stack:
--dict:1155/1684(ro)(G)--   --dict:1/20(G)--   --dict:82/200(L)--
--dict:108/127(ro)(G)--   --dict:295/300(ro)(G)--   --dict:23/30(L)--
--dict:6/8(L)--   --dict:21/40(L)--   --dict:5/5(L)-- Current
allocation mode is local Last OS error: 35

The files can successfully be opened with Acrobat Reader X in Windows
XP. Should I take this to the ghostscript team directly?
-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: gv hiccupping over PDFs created by gs

2011-11-06 Thread Ed Ahlsen-Girard

On Sun, 06 Nov 2011 20:44:00 -0500
STeve Andre' and...@msu.edu wrote:

  [...]  
 Yeah, it's their problem.  But gv has gotten so bad at dealing with
 PDFs for me that I've just about stopped using it entirely.  In ports
 is xpdf and zathura, and epdfview...
 
 --STeve Andre'

Thanks, I'll check those out.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

LibreOffice Calc acting weird

2011-07-09 Thread Ed Ahlsen-Girard

Running LibreOffice calc from the Jun 29 snap (on the June 29
snap), calc has some quirks.

Page preview presents a gray screen for some, but not all, worksheets,
and printing the selected worksheet fails silently. Printing selected
cells works. Dmesg below.
-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

OpenBSD 4.9-current (GENERIC) #54: Wed Jun 29 08:50:33 MDT 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz (GenuineIntel 686-class) 2.66
GHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 1072713728 (1023MB) avail mem = 1044971520 (996MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/12/02, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (56 entries) bios0: vendor Dell
Computer Corporation version A03 date 11/12/2002 bios0: Dell Computer
Corporation Dimension 4550 acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF!
acpi0: wakeup devices VBTN(S4) PCI0(S3) USB0(S3) USB1(S3) USB2(S3)
PCI1(S5) KBD_(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc/0xf800 0xcf800/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 Intel 82845G Host rev 0x01
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe800, size 0x800
ppb0 at pci0 dev 1 function 0 Intel 82845G AGP rev 0x01
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 NVIDIA GeForce4 MX 420 rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 Intel 82801DB USB rev 0x01: apic 1
int 16 uhci1 at pci0 dev 29 function 1 Intel 82801DB USB rev 0x01:
apic 1 int 19 uhci2 at pci0 dev 29 function 2 Intel 82801DB USB rev
0x01: apic 1 int 18 ehci0 at pci0 dev 29 function 7 Intel 82801DB USB
rev 0x01: apic 1 int 23 usb0 at ehci0: USB revision 2.0
uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0x81
pci2 at ppb1 bus 2
cmpci0 at pci2 dev 0 function 0 C-Media Electronics CMI8738/C3DX
Audio rev 0x10: apic 1 int 21 audio0 at cmpci0
opl at cmpci0 not configured
mpu at cmpci0 not configured
vendor Broadcom, unknown product 0x4212 (class communications
subclass modem, rev 0x02) at pci2 dev 1 function 0 not configured fxp0
at pci2 dev 8 function 0 Intel PRO/100 VE rev 0x81, i82562: apic 1
int 20, address 00:07:e9:c3:c0:ba inphy0 at fxp0 phy 1: i82562ET 10/100
PHY, rev. 0 ichpcib0 at pci0 dev 31 function 0 Intel 82801DB LPC rev
0x01 pciide0 at pci0 dev 31 function 1 Intel 82801DB IDE rev 0x01:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility wd0 at pciide0 channel 0 drive 0: WDC WD600BB-75CAA0
wd0: 16-sector PIO, LBA, 57220MB, 117187500 sectors wd1 at pciide0
channel 0 drive 1: WDC WD800JB-00JJC0 wd1: 16-sector PIO, LBA,
76319MB, 156301488 sectors wd0(pciide0:0:0): using PIO mode 4,
Ultra-DMA mode 5 wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2
targets cd0 at scsibus0 targ 0 lun 0: _NEC, DVD+RW ND-1100A, 10GE
ATAPI 5/cdrom removable wd2 at pciide0 channel 1 drive 1: WDC
WD800JB-00JJC0 wd2: 16-sector PIO, LBA, 76319MB, 156301488 sectors
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 Intel 82801DB SMBus rev 0x01: apic
1 int 17 iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 Intel UHCI root hub rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0 Logitech
Trackball rev 1.10/2.20 addr 2 uhidev0: iclass 3/1
ums0 at

Re: LibreOffice Calc acting weird

2011-07-09 Thread Ed Ahlsen-Girard

On Sat, 9 Jul 2011 23:37:34 +0200
jirib ji...@devio.us wrote:

 On Sat, 9 Jul 2011 12:42:09 -0500
 Ed Ahlsen-Girard eagir...@cox.net wrote:
   
  Running LibreOffice calc from the Jun 29 snap (on the June 29
  snap), calc has some quirks.
  
  Page preview presents a gray screen for some, but not all,
  worksheets, and printing the selected worksheet fails silently.
  Printing selected cells works. Dmesg below.  
 
 Hi,
 
 do you have a 'tiling WM'?
 
 LO for me works sometimes strange in combination with Awesome WM :/
 
 jirib  

I use fvwm.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: update: mail/claws-mail* 3.7.9

2011-06-05 Thread Ed Ahlsen-Girard

 On 2011-06-04 12:01:48, Stuart Henderson stu () spacehopper ! org wrote:
 On 2011-06-03, Ed Ahlsen-Girard eahlsengir...@yahoo.com wrote:
  From: ? ? ? Gabriel Guzman gabe () guzman-nunez ! com
  Date: ? ? ? 2011-04-17 15:19:09

  On Sun, 17 Apr 2011 16:50:43 +0200 (CEST)
  Antoine Jacoutot ajacou...@bsdfrog.org wrote:

   On Sun, 17 Apr 2011, Gabriel Guzman wrote:

On Sun, 17 Apr 2011 13:46:44 +0200
roberth rob...@openbsd.pap.st wrote:

  (snip)

   Your ports aren't up to date, gnutls especially.

  ok... that would explain it. ?I'll update them and test.

  thanks,
  gabe.

  I have been unable to run claws since the 29 May snapshot. ?
  Segmentation fault with nothing logged. ?Uninstall/reinstall, no?
  difference, removing the .claws-mail directory, no difference.
  I refresh ports every time I install a new snapshot.
  What am I overlooking? 

 Works here in light testing on amd64. Make sure all packages were
 updated together from a single snapshot. If it still fails you'll need to 
 give more information. dmesg is
 always good. Try and obtain a backtrace (gdb `which claws-mail`,
 run, then when it crashes 'thread apply all bt')

I always update all packages when I go to a new snapshot.  gdb below.
--

Ed Ahlsen-Girard

name@place(~)$gdb `which claws-mail`
GNU gdb 6.3
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type show copying to see the conditions.
There is absolutely no warranty for GDB.  Type show warranty for details.
This GDB was configured as i386-unknown-openbsd4.9...(no debugging symbols 
found)

(gdb) run
Starting program: /usr/local/bin/claws-mail 

Program received signal SIGSEGV, Segmentation fault.
[Switching to process 13309, thread 0x2d719800]
0x093f373d in XGetXCBConnection () from /usr/X11R6/lib/libX11-xcb.so.1.0
(gdb) thread apply all bt

Thread 1 (process 13309, thread 0x2d719800):
#0  0x093f373d in XGetXCBConnection () from /usr/X11R6/lib/libX11-xcb.so.1.0
#1  0x1c0d44c6 in clean_quit ()
#2  0x1c0d6dfa in main ()
(gdb)

Re: update: mail/claws-mail* 3.7.9

2011-06-04 Thread Ed Ahlsen-Girard

Oops, forgot the dmesg.
 
--


Ed Ahlsen-Girard

OpenBSD 4.9-current (GENERIC) #23: Thu Jun  2 15:06:03 MDT 2011
    dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz (GenuineIntel 686-class) 2.66 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 1072713728 (1023MB)
avail mem = 1044312064 (995MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/12/02, BIOS32 rev. 0 @ 0xffe90, SMBIOS 
rev. 2.3 @ 0xf0450 (56 entries)
bios0: vendor Dell Computer Corporation version A03 date 11/12/2002
bios0: Dell Computer Corporation Dimension 4550
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF!
acpi0: wakeup devices VBTN(S4) PCI0(S3) USB0(S3) USB1(S3) USB2(S3) PCI1(S5) 
KBD_(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
condref: \\_OSI 0xd5f7e544
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc/0xf800 0xcf800/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 Intel 82845G Host rev 0x01
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe800, size 0x800
ppb0 at pci0 dev 1 function 0 Intel 82845G AGP rev 0x01
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 NVIDIA GeForce4 MX 420 rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 Intel 82801DB USB rev 0x01: apic 1 int 16
uhci1 at pci0 dev 29 function 1 Intel 82801DB USB rev 0x01: apic 1 int 19
uhci2 at pci0 dev 29 function 2 Intel 82801DB USB rev 0x01: apic 1 int 18
ehci0 at pci0 dev 29 function 7 Intel 82801DB USB rev 0x01: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0x81
pci2 at ppb1 bus 2
cmpci0 at pci2 dev 0 function 0 C-Media Electronics CMI8738/C3DX Audio rev 
0x10: apic 1 int 21
audio0 at cmpci0
opl at cmpci0 not configured
mpu at cmpci0 not configured
vendor Broadcom, unknown product 0x4212 (class communications subclass modem, 
rev 0x02) at pci2 dev 1 function 0 not configured
fxp0 at pci2 dev 8 function 0 Intel PRO/100 VE rev 0x81, i82562: apic 1 int 
20, address 00:07:e9:c3:c0:ba
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 Intel 82801DB LPC rev 0x01
pciide0 at pci0 dev 31 function 1 Intel 82801DB IDE rev 0x01: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: WDC WD600BB-75CAA0
wd0: 16-sector PIO, LBA, 57220MB, 117187500 sectors
wd1 at pciide0 channel 0 drive 1: WDC WD800JB-00JJC0
wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: _NEC, DVD+RW ND-1100A, 10GE ATAPI 5/cdrom 
removable
wd2 at pciide0 channel 1 drive 1: WDC WD800JB-00JJC0
wd2: 16-sector PIO, LBA, 76319MB, 156301488 sectors
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 Intel 82801DB SMBus rev 0x01: apic 1 int 17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 Intel UHCI root hub rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 Intel UHCI root hub rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0 Logitech Trackball rev 
1.10/2.20 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on wd1a swap on wd1b dump on wd1b

 
--


Ed Ahlsen-Girard

Re: update: mail/claws-mail* 3.7.9

2011-06-03 Thread Ed Ahlsen-Girard

 From:       Gabriel Guzman gabe () guzman-nunez ! com
 Date:       2011-04-17 15:19:09

 On Sun, 17 Apr 2011 16:50:43 +0200 (CEST)
 Antoine Jacoutot ajacou...@bsdfrog.org wrote:

  On Sun, 17 Apr 2011, Gabriel Guzman wrote:

   On Sun, 17 Apr 2011 13:46:44 +0200
   roberth rob...@openbsd.pap.st wrote:

(snip)

  Your ports aren't up to date, gnutls especially.

 ok... that would explain it.  I'll update them and test.

 thanks,
 gabe.

I have been unable to run claws since the 29 May snapshot.  
Segmentation fault with nothing logged.  Uninstall/reinstall, no 
difference, removing the .claws-mail directory, no difference.
I refresh ports every time I install a new snapshot.
What am I overlooking?

Ed Ahlsen-Girard

Re: UPDATE: gnash 0.8.8

2010-11-12 Thread Ed Ahlsen-Girard

 From:   Jasper Lievisse Adriaanse jasper () humppa ! nl
 Date:   2010-10-12 8:34:36

 On Mon, Oct 11, 2010 at 04:46:42AM -0400, Brad wrote:
  On Sun, Oct 10, 2010 at 04:42:46PM -0400, Brad wrote:
   On Fri, Oct 08, 2010 at 03:32:03AM -0400, Brad wrote:
Here is an update to gnash 0.8.8.

Looking for some further testing.

   A second rev to fix the issue with lber and dca linking
   if they happen to be installed.

  Updated for the cairo update.
 Please add a short comment as to why we're using internal libtool.
 Other than that, OK with me.

Hats off to the gnash porters.  0.8.8 actually did something I found
useful, which had never happened before.

Now, sound was not synched with the video, and web pages with many
Flash embeds seem to fail to load in Firefox, but I think this is still
big progress.

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

OpenOffice snapshot

2010-10-06 Thread Ed Ahlsen-Girard

The only OpenOffice related snapshots I see on either the master site
or any of the mirrors I have checked are dictionaries.

Could anyone say what happened?

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

Re: freerdp port

2010-07-28 Thread Ed Ahlsen-Girard

From:   Landry Breuil landry () rhaalovely ! net
Date:   2010-07-28 7:20:37

 On Tue, Jul 27, 2010 at 11:06:17PM -0500, Ed Ahlsen-Girard wrote:
  Trouble building the port on i386.  Asking for patch files.  I don't
  understand the error.

 cd /usr/ports/print/cups  make clean

make clean ran fine, leading to the new, improved error:

sudo make
===  freerdp-0.7.3 depends on: cups-* - not found
===  Verifying install for cups-* in print/cups
===  Checking files for cups-1.4.4p1
`/usr/ports/distfiles/cups-1.4.4-source.tar.bz2' is up to date.
 (SHA256) cups-1.4.4-source.tar.bz2: OK
===  cups-1.4.4p1 depends on: xdg-utils-* - found
===  cups-1.4.4p1 depends on: metaauto-* - found
===  cups-1.4.4p1 depends on: automake-=1.9,1.10 - found
===  cups-1.4.4p1 depends on: autoconf-2.62 - found
===  cups-1.4.4p1 depends on: gmake-* - found
===  cups-1.4.4p1 depends on: bzip2-* - found
===  cups-1.4.4p1 depends on: png-* - found
===  cups-1.4.4p1 depends on: tiff-* - found
===  cups-1.4.4p1 depends on: dbus-* - found
===  Verifying specs: png.=3 tiff.=35 dbus-1.=7 png.=3 tiff.=35
dbus-1.=7 asn1 c crypto gssapi jpeg krb5 m pthread ssl stdc++ z asn1 c
crypto gssapi jpeg krb5 m pthread ssl stdc++ z ===  found png.10.0
tiff.38.3 dbus-1.7.1 asn1.18.0 c.56.0 crypto.18.0 gssapi.5.0 jpeg.64.0
krb5.18.0 m.5.2 pthread.12.1 ssl.15.1 stdc++.50.0 z.4.1 ===
Extracting for cups-1.4.4p1 install -m
555 /usr/ports/print/cups/files/krb5-config /usr/ports/pobj/cups-1.4.4/bin
===  Patching for cups-1.4.4p1 File to patch: 

-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL
On Tue, 27 Jul 2010 23:06:17 -0500
Ed Ahlsen-Girard eagir...@cox.net wrote:

 Trouble building the port on i386.  Asking for patch files.  I don't
 understand the error.

 $sudo make
 ===  freerdp-0.7.3 depends on: libao-* - found
 ===  freerdp-0.7.3 depends on: cups-* - not found
 ===  Verifying install for cups-* in print/cups
 ===  Checking files for cups-1.4.4p1
  Fetch
  http://ftp.easysw.com/pub/cups/1.4.4/cups-1.4.4-source.tar.bz2
 cups-1.4.4-source.tar.bz2 100% ||  4367 KB
 00:32
  (SHA256) cups-1.4.4-source.tar.bz2: OK
 ===  cups-1.4.4p1 depends on: xdg-utils-* - found
 ===  cups-1.4.4p1 depends on: metaauto-* - found
 ===  cups-1.4.4p1 depends on: automake-=1.9,1.10 - found
 ===  cups-1.4.4p1 depends on: autoconf-2.62 - found

 ===  cups-1.4.4p1 depends on: gmake-* - found
 ===  cups-1.4.4p1 depends on: bzip2-* - found
 ===  cups-1.4.4p1 depends on: png-* - found
 ===  cups-1.4.4p1 depends on: tiff-* - found
 ===  cups-1.4.4p1 depends on: dbus-* - found
 ===  Verifying specs: png.=3 tiff.=35 dbus-1.=7 png.=3 tiff.=35
 dbus-1.=7 asn1 c crypto gssapi jpeg krb5 m pthread ssl stdc++ z asn1
 c crypto gssapi jpeg krb5 m pthread ssl stdc++ z ===  found png.10.0
 tiff.38.3 dbus-1.7.1 asn1.18.0 c.56.0 crypto.18.0 gssapi.5.0 jpeg.64.0
 krb5.18.0 m.5.2 pthread.12.1 ssl.15.1 stdc++.50.0 z.4.1 ===
 Extracting for cups-1.4.4p1 install -m
 555 /usr/ports/print/cups/files/krb5-config /usr/ports/pobj/cups-1.4.4/bin
 ===  Patching for cups-1.4.4p1 File to patch: No file found--skip
 this patch? [n] y 1 out of 1 hunks ignored--saving rejects to Oops.rej
 ***   patch-backend_betest_c did not apply cleanly 1 out of 4 hunks
 failed--saving rejects to configure.rej ***   patch-configure did not
 apply cleanly File to patch: y
 No file found--skip this patch? [n] y
 2 out of 2 hunks ignored--saving rejects to y.rej
 ***   patch-desktop_cups_desktop did not apply cleanly
 File to patch: y
 No file found--skip this patch? [n] y
 1 out of 1 hunks ignored--saving rejects to y.rej
 ***   patch-scheduler_cups-driverd_c did not apply cleanly
 4 out of 4 hunks failed--saving rejects to scheduler/select.c.rej
 ***   patch-scheduler_select_c did not apply cleanly
 Ignoring previously applied (or reversed) patch.
 1 out of 1 hunks ignored--saving rejects to systemv/Makefile.rej
 ***   patch-systemv_Makefile did not apply cleanly
 *** Error code 1

 Stop in /usr/ports/print/cups (line 2241
 of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

 Stop in /usr/ports/print/cups (line 1580
 of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

 Stop in /usr/ports/print/cups (line 2136
 of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

 Stop in /usr/ports/print/cups (line 2116
 of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

 Stop in /usr/ports/print/cups (line 1611
 of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

 Stop in /usr/ports/print/cups (line 2116
 of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

 Stop in /usr/ports/x11/freerdp (line 1765
 of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

 Stop in /usr/ports/x11/freerdp (line 2116
 of /usr/ports/infrastructure/mk/bsd.port.mk).

 dmesg below.

freerdp port

2010-07-27 Thread Ed Ahlsen-Girard

Trouble building the port on i386.  Asking for patch files.  I don't
understand the error.

$sudo make
===  freerdp-0.7.3 depends on: libao-* - found
===  freerdp-0.7.3 depends on: cups-* - not found
===  Verifying install for cups-* in print/cups
===  Checking files for cups-1.4.4p1
 Fetch http://ftp.easysw.com/pub/cups/1.4.4/cups-1.4.4-source.tar.bz2
cups-1.4.4-source.tar.bz2 100% ||  4367 KB
00:32
 (SHA256) cups-1.4.4-source.tar.bz2: OK
===  cups-1.4.4p1 depends on: xdg-utils-* - found
===  cups-1.4.4p1 depends on: metaauto-* - found
===  cups-1.4.4p1 depends on: automake-=1.9,1.10 - found
===  cups-1.4.4p1 depends on: autoconf-2.62 - found

===  cups-1.4.4p1 depends on: gmake-* - found
===  cups-1.4.4p1 depends on: bzip2-* - found
===  cups-1.4.4p1 depends on: png-* - found
===  cups-1.4.4p1 depends on: tiff-* - found
===  cups-1.4.4p1 depends on: dbus-* - found
===  Verifying specs: png.=3 tiff.=35 dbus-1.=7 png.=3 tiff.=35
dbus-1.=7 asn1 c crypto gssapi jpeg krb5 m pthread ssl stdc++ z asn1 c
crypto gssapi jpeg krb5 m pthread ssl stdc++ z ===  found png.10.0
tiff.38.3 dbus-1.7.1 asn1.18.0 c.56.0 crypto.18.0 gssapi.5.0 jpeg.64.0
krb5.18.0 m.5.2 pthread.12.1 ssl.15.1 stdc++.50.0 z.4.1 ===
Extracting for cups-1.4.4p1 install -m
555 /usr/ports/print/cups/files/krb5-config /usr/ports/pobj/cups-1.4.4/bin
===  Patching for cups-1.4.4p1 File to patch: No file found--skip this
patch? [n] y 1 out of 1 hunks ignored--saving rejects to Oops.rej
***   patch-backend_betest_c did not apply cleanly 1 out of 4 hunks
failed--saving rejects to configure.rej ***   patch-configure did not
apply cleanly File to patch: y
No file found--skip this patch? [n] y
2 out of 2 hunks ignored--saving rejects to y.rej
***   patch-desktop_cups_desktop did not apply cleanly
File to patch: y
No file found--skip this patch? [n] y
1 out of 1 hunks ignored--saving rejects to y.rej
***   patch-scheduler_cups-driverd_c did not apply cleanly
4 out of 4 hunks failed--saving rejects to scheduler/select.c.rej
***   patch-scheduler_select_c did not apply cleanly
Ignoring previously applied (or reversed) patch.
1 out of 1 hunks ignored--saving rejects to systemv/Makefile.rej
***   patch-systemv_Makefile did not apply cleanly
*** Error code 1

Stop in /usr/ports/print/cups (line 2241
of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

Stop in /usr/ports/print/cups (line 1580
of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

Stop in /usr/ports/print/cups (line 2136
of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

Stop in /usr/ports/print/cups (line 2116
of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

Stop in /usr/ports/print/cups (line 1611
of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

Stop in /usr/ports/print/cups (line 2116
of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

Stop in /usr/ports/x11/freerdp (line 1765
of /usr/ports/infrastructure/mk/bsd.port.mk). *** Error code 1

Stop in /usr/ports/x11/freerdp (line 2116
of /usr/ports/infrastructure/mk/bsd.port.mk).

dmesg below.
-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

OpenBSD 4.8-beta (GENERIC) #43: Sun Jul 25 10:07:23 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz (GenuineIntel 686-class) 2.66
GHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 1072746496 (1023MB) avail mem = 1045221376 (996MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/12/02, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (56 entries) bios0: vendor Dell
Computer Corporation version A03 date 11/12/2002 bios0: Dell Computer
Corporation Dimension 4550 acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT APIC BOOT ASF!
acpi0: wakeup devices VBTN(S4) PCI0(S3) USB0(S3) USB1(S3) USB2(S3)
PCI1(S5) KBD_(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc/0xf800 0xcf800/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 Intel 82845G Host rev 0x01
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe800, size 0x800
ppb0 at pci0 dev 1 function 0 Intel 82845G AGP rev 0x01
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 NVIDIA GeForce4 MX 420 rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 Intel 82801DB USB rev 0x01: apic 1
int 16 (irq 11) uhci1 at pci0 dev 29 function 1 Intel 82801DB USB rev
0x01: apic 1 int 19 (irq 10) uhci2 at

ltdl

2009-11-22 Thread Ed Ahlsen-Girard

Gnash breaks.  Of course it's not like I've had it working
usefully.  :-/

(r...@feh)$pkg_add -v gnash-0.8.3p3.tgz gnout
Can't install gnash-0.8.3p3: lib not found ltdl.4.5

cat gnout
parsing gnash-0.8.3p3
Dependencies for gnash-0.8.3p3 resolve to: libxml-2.7.6,\

gstreamer-plugins-ugly-0.10.7p3, gtk+2-2.18.3,
gstreamer-gnome-0.10.19p5, libiconv-1.13, gstreamer-ffmpeg-0.10.5p5,
curl-7.19.7, gstreamer-plugins-base-0.10.19p4, libltdl-1.5.26,
gstreamer-plugins-bad-0.10.7p9, boost-1.34.1p4, agg-2.5p1,
gettext-0.17p0, gstreamer-plugins-good-0.10.8p77v0 found libspec
agg.3.0 in package agg-2.5p1 found libspec boost_date_time-mt.1.0 in
package boost-1.34.1p4 found libspec boost_thread-mt.1.0 in package
boost-1.34.1p4 found libspec c.52.0 in /usr/lib found libspec
crypto.18.0 in /usr/lib found libspec curl.14.1 in package curl-7.19.7
found libspec expat.9.0 in /usr/lib found libspec fontconfig.6.0
in /usr/X11R6/lib found libspec freetype.17.0 in /usr/X11R6/lib found
libspec gdk-x11-2.0.1402.0 in package gtk+2-2.18.3 found libspec
gdk_pixbuf-2.0.1402.0 in package gtk+2-2.18.3 found libspec
glib-2.0.1802.0 in package glib2-2.22.2p0 found libspec
gmodule-2.0.1802.0 in package glib2-2.22.2p0 found libspec
gobject-2.0.1802.0 in package glib2-2.22.2p0 found libspec
gstbase-0.10.0.2 in package gstreamer-0.10.19p3 found libspec
gstpbutils-0.10.0.1 in package gstreamer-plugins-base-0.10.19p4 found
libspec gstreamer-0.10.0.2 in package gstreamer-0.10.19p3 found libspec
gthread-2.0.1802.0 in package glib2-2.22.2p0 found libspec
gtk-x11-2.0.1402.0 in package gtk+2-2.18.3 found libspec iconv.6.0 in
package libiconv-1.13 found libspec idn.16.30 in package libidn-1.11
found libspec intl.4.0 in package gettext-0.17p0 found libspec
jpeg.63.0 in package jpeg-7 Dependencies for gnash-0.8.3p3 resolve to:
libxml-2.7.6, gstreamer-plugins-ugly-0.10.7p3, gtk+2-2.18.3,
gstreamer-gnome-0.10.19p5, libiconv-1.13, gstreamer-ffmpeg-0.10.5p5,
curl-7.19.7, gstreamer-plugins-base-0.10.19p4, libltdl-1.5.26,
gstreamer-plugins-bad-0.10.7p9, boost-1.34.1p4, agg-2.5p1,
gettext-0.17p0, gstreamer-plugins-good-0.10.8p77v0 Full dependency tree
is
xvidcore-1.2.2p0,gtk+2-2.18.3,avahi-0.6.25p5,gnome-mime-data-2.18.0p2,
libogg-1.1.4,atk-1.28.0,flac-1.2.1p0,bzip2-1.0.5,
ORBit2-2.14.17p0,libmp4v2-1.5.0.1,ffmpeg-20080620p12,libiconv-1.13,
libtheora-1.0,x264-20090204,libmpeg2-0.5.1p0,libmad-0.15.1bp1,
gnome-vfs2-2.24.2p0,gettext-0.17p0,libsndfile-1.0.20p1,gstreamer-plugins-ugly-0.10.7p3,libxml-2.7.6,dbus-1.2.16,libdvd-0.3p2,libid3tag-0.15.1bp3,
boost-1.34.1p4,agg-2.5p1,gdbm-1.8.3p0,libdaemon-0.13,gstreamer-gnome-0.10.19p5,
libexif-0.6.18,imlib2-1.4.2p0,pcre-7.9,liba52-0.7.4p2,
png-1.2.40,jpeg-7,gconf2-2.28.0p0,python-2.5.4p2,schroedinger-1.0.7,
sdl-1.2.13p12,lame-3.98.2,libdvdread-0.9.7p1,gstreamer-0.10.19p3,
speex-1.2rc1,libIDL-0.8.13,cdparanoia-3.a9.8p0,faac-1.26,pango-1.24.5,
gstreamer-plugins-good-0.10.8p77v0,fam-2.7.0p9,glib2-2.22.2p0,sqlite3-3.6.16,
tiff-3.8.2p5,tremor-20080326,libungif-4.1.4p1,libmms-0.4,
gstreamer-ffmpeg-0.10.5p5,dbus-glib-0.80p1v0,curl-7.19.7,libshout-2.2.2p0,
libmpcdec-1.2.6,libltdl-1.5.26,gstreamer-plugins-bad-0.10.7p9,
libvorbis-1.2.3,faad-2.6.1,cairo-1.8.8p0,gsm-1.0.13,wavpack-4.60.0,
hicolor-icon-theme-0.11,glitz-0.5.6p2,taglib-1.6p0,
gstreamer-plugins-base-0.10.19p4,liboil-0.3.16,libidn-1.11 library
ltdl.4.5 not found in /usr/local/lib: libltdl.so.4.4 (minor not large
enough) found libspec m.5.2 in /usr/lib found libspec pcre.2.3 in
package pcre-7.9 found libspec pthread.12.0 in /usr/lib found libspec
ssl.15.1 in /usr/lib found libspec stdc++.49.0 in /usr/lib found
libspec xml2.11.0 in package libxml-2.7.6 found libspec z.4.1
in /usr/lib



-- 

Edward Ahlsen-Girard
Ft Walton Beach, FL

66 matches

Mail list logo