Re: Anybody using the Valhalla vintage reverb plug-in in ProTools?
Slau and everyone else, With regards to what you and others stated in your previous email messages, what would be your answer to the following question? If one was not worried about the expense of purchasing a control surface, and all considerations given to the restraints imposed on our population, what high-end control surface would you recommend at this moment In time? I would like to know what you would purchase if your control surface was damaged basically. Respectfully, Steve Baskis Baskis.com > On Mar 28, 2020, at 16:08, Slau Halatyn wrote: > > The thing about the single Faderport is that it doesn't support plug-in > automation control, kind of a dealbreaker for most. > > >> On Mar 28, 2020, at 3:33 PM, TheOreoMonster wrote: >> >> From everything I have seen the FaderPort 8 is the least expensive option >> for ProTools users. However people may want to look into how compatible the >> FaderPort is with ProTOols if a single fader is sufficient, as it’s >> considerably less expensive. >> On Mar 28, 2020, at 2:14 PM, Slau Halatyn wrote: >>> >>> Hi Charles, >>> I've never been in the market for a compact control surface and I don't >>> follow too closely what's available currently. It seems like the Presonus >>> Faderport 8 is fairly popular and has a true fader flip mode which is quite >>> helpful. Apart from that, it gets pretty expensive very quickly. Perhaps >>> some others may have more suggestions. >>> Slau >>> >>> On Mar 28, 2020, at 1:54 PM, Charles wrote: Slau Thank you very much for that info. That is too bad. Since you mentioned control surfaces, is there one that you can recommend for someone who just works by himself at home? Sent from my iPhone > On Mar 28, 2020, at 1:37 PM, Slau Halatyn wrote: > > Unfortunately, all Valhalla plug-ins are written in the JUCE platform > which, depending on how the developer authors things, can lead to > parameters not responding to the accessibility API. With a control > surface, everything works fine but not with VoiceOver. I know the > developer and will reach out to see if he can do anything about it for > future releases. > Slau > > >> On Mar 28, 2020, at 12:45 PM, Charles wrote: >> >> I have just installed the Valhalla vintage rebirth and the Valhalla >> delay plug-ins. I am using the latest version of ProTools and Mac OS X >> 15. Though I am able to see all the parameters, I’m not able to change >> any of them. Is anybody able to use the Valhalla plug-ins in ProTools? >> >> Sent from my iPhone >> >> -- >> You received this message because you are subscribed to the Google >> Groups "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send >> an email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/CC8AC63F-642A-4336-9E3A-82E20EC2D57F%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/MN2PR22MB1952F76B27CAFBDED99259A1BBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/8EB23231-4F13-40C6-BEB2-8C0840267322%40gmail.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/735DCAB6-2724-4F33-84C4-F7CF6026EA3A%40gmail.com. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an >
Re: Anybody using the Valhalla vintage reverb plug-in in ProTools?
Haven't confirmed that myself. Chi was the one who mentioned it but I'm not sure of the timeframe. > On Mar 28, 2020, at 4:30 PM, TheOreoMonster wrote: > > Is that still the case with V2? PreSonus did update the single FaderPort > after the FaderPort 8 and 16 came out. > > >> On Mar 28, 2020, at 4:08 PM, Slau Halatyn wrote: >> >> The thing about the single Faderport is that it doesn't support plug-in >> automation control, kind of a dealbreaker for most. >> >> >>> On Mar 28, 2020, at 3:33 PM, TheOreoMonster >>> wrote: >>> >>> From everything I have seen the FaderPort 8 is the least expensive option >>> for ProTools users. However people may want to look into how compatible >>> the FaderPort is with ProTOols if a single fader is sufficient, as it’s >>> considerably less expensive. >>> On Mar 28, 2020, at 2:14 PM, Slau Halatyn wrote: Hi Charles, I've never been in the market for a compact control surface and I don't follow too closely what's available currently. It seems like the Presonus Faderport 8 is fairly popular and has a true fader flip mode which is quite helpful. Apart from that, it gets pretty expensive very quickly. Perhaps some others may have more suggestions. Slau > On Mar 28, 2020, at 1:54 PM, Charles wrote: > > Slau > > Thank you very much for that info. That is too bad. Since you mentioned > control surfaces, is there one that you can recommend for someone who > just works by himself at home? > > Sent from my iPhone > >> On Mar 28, 2020, at 1:37 PM, Slau Halatyn wrote: >> >> Unfortunately, all Valhalla plug-ins are written in the JUCE platform >> which, depending on how the developer authors things, can lead to >> parameters not responding to the accessibility API. With a control >> surface, everything works fine but not with VoiceOver. I know the >> developer and will reach out to see if he can do anything about it for >> future releases. >> Slau >> >> >>> On Mar 28, 2020, at 12:45 PM, Charles wrote: >>> >>> I have just installed the Valhalla vintage rebirth and the Valhalla >>> delay plug-ins. I am using the latest version of ProTools and Mac OS X >>> 15. Though I am able to see all the parameters, I’m not able to change >>> any of them. Is anybody able to use the Valhalla plug-ins in ProTools? >>> >>> Sent from my iPhone >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. >> >> -- >> You received this message because you are subscribed to the Google >> Groups "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send >> an email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/CC8AC63F-642A-4336-9E3A-82E20EC2D57F%40gmail.com. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/MN2PR22MB1952F76B27CAFBDED99259A1BBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/8EB23231-4F13-40C6-BEB2-8C0840267322%40gmail.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/735DCAB6-2724-4F33-84C4-F7CF6026EA3A%40gmail.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >>
Re: Anybody using the Valhalla vintage reverb plug-in in ProTools?
well that's good to know that it's working on other DAW software on the Mac side. Not good that is not working in Pro tools although you would have thought that should be easier to narrow down from a development point of view because that's just broken in one particular plug-in format. On 28 March 2020 21:25:42 TheOreoMonster wrote: Its a ProTools AAX issue as The parameters are accessible in Logic and Reaper on the Mac with VoiceOver. On Mar 28, 2020, at 5:23 PM, Phil Muir wrote: that's really unfortunate. Sounds to me like it is a Mac OS voice-over thing though because all of those plug-in parameters are definitely accessible on the Windows platform in multiple doors. On 28 March 2020 17:37:45 Slau Halatyn wrote: Unfortunately, all Valhalla plug-ins are written in the JUCE platform which, depending on how the developer authors things, can lead to parameters not responding to the accessibility API. With a control surface, everything works fine but not with VoiceOver. I know the developer and will reach out to see if he can do anything about it for future releases. Slau On Mar 28, 2020, at 12:45 PM, Charles wrote: I have just installed the Valhalla vintage rebirth and the Valhalla delay plug-ins. I am using the latest version of ProTools and Mac OS X 15. Though I am able to see all the parameters, I’m not able to change any of them. Is anybody able to use the Valhalla plug-ins in ProTools? Sent from my iPhone -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/CC8AC63F-642A-4336-9E3A-82E20EC2D57F%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/1712306d2f0.27bf.db423894e9b0bc6221d01044e43225ea%40accessibilitytraining.co.uk. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/F986DD57-1309-4099-85B6-60F84B2CE424%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/171230d7240.27bf.db423894e9b0bc6221d01044e43225ea%40accessibilitytraining.co.uk.
Re: Anybody using the Valhalla vintage reverb plug-in in ProTools?
Its a ProTools AAX issue as The parameters are accessible in Logic and Reaper on the Mac with VoiceOver. > On Mar 28, 2020, at 5:23 PM, Phil Muir > wrote: > > that's really unfortunate. Sounds to me like it is a Mac OS voice-over thing > though because all of those plug-in parameters are definitely accessible on > the Windows platform in multiple doors. > > > On 28 March 2020 17:37:45 Slau Halatyn wrote: > >> Unfortunately, all Valhalla plug-ins are written in the JUCE platform which, >> depending on how the developer authors things, can lead to parameters not >> responding to the accessibility API. With a control surface, everything >> works fine but not with VoiceOver. I know the developer and will reach out >> to see if he can do anything about it for future releases. >> Slau >> >> >>> On Mar 28, 2020, at 12:45 PM, Charles wrote: >>> I have just installed the Valhalla vintage rebirth and the Valhalla delay >>> plug-ins. I am using the latest version of ProTools and Mac OS X 15. Though >>> I am able to see all the parameters, I’m not able to change any of them. Is >>> anybody able to use the Valhalla plug-ins in ProTools? >>> Sent from my iPhone >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/CC8AC63F-642A-4336-9E3A-82E20EC2D57F%40gmail.com. > > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/1712306d2f0.27bf.db423894e9b0bc6221d01044e43225ea%40accessibilitytraining.co.uk. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/F986DD57-1309-4099-85B6-60F84B2CE424%40gmail.com.
Re: Anybody using the Valhalla vintage reverb plug-in in ProTools?
that's really unfortunate. Sounds to me like it is a Mac OS voice-over thing though because all of those plug-in parameters are definitely accessible on the Windows platform in multiple doors. On 28 March 2020 17:37:45 Slau Halatyn wrote: Unfortunately, all Valhalla plug-ins are written in the JUCE platform which, depending on how the developer authors things, can lead to parameters not responding to the accessibility API. With a control surface, everything works fine but not with VoiceOver. I know the developer and will reach out to see if he can do anything about it for future releases. Slau On Mar 28, 2020, at 12:45 PM, Charles wrote: I have just installed the Valhalla vintage rebirth and the Valhalla delay plug-ins. I am using the latest version of ProTools and Mac OS X 15. Though I am able to see all the parameters, I’m not able to change any of them. Is anybody able to use the Valhalla plug-ins in ProTools? Sent from my iPhone -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/CC8AC63F-642A-4336-9E3A-82E20EC2D57F%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/1712306d2f0.27bf.db423894e9b0bc6221d01044e43225ea%40accessibilitytraining.co.uk.
Re: Anybody using the Valhalla vintage reverb plug-in in ProTools?
Is that still the case with V2? PreSonus did update the single FaderPort after the FaderPort 8 and 16 came out. > On Mar 28, 2020, at 4:08 PM, Slau Halatyn wrote: > > The thing about the single Faderport is that it doesn't support plug-in > automation control, kind of a dealbreaker for most. > > >> On Mar 28, 2020, at 3:33 PM, TheOreoMonster wrote: >> >> From everything I have seen the FaderPort 8 is the least expensive option >> for ProTools users. However people may want to look into how compatible the >> FaderPort is with ProTOols if a single fader is sufficient, as it’s >> considerably less expensive. >> >>> On Mar 28, 2020, at 2:14 PM, Slau Halatyn wrote: >>> >>> Hi Charles, >>> I've never been in the market for a compact control surface and I don't >>> follow too closely what's available currently. It seems like the Presonus >>> Faderport 8 is fairly popular and has a true fader flip mode which is quite >>> helpful. Apart from that, it gets pretty expensive very quickly. Perhaps >>> some others may have more suggestions. >>> Slau >>> >>> On Mar 28, 2020, at 1:54 PM, Charles wrote: Slau Thank you very much for that info. That is too bad. Since you mentioned control surfaces, is there one that you can recommend for someone who just works by himself at home? Sent from my iPhone > On Mar 28, 2020, at 1:37 PM, Slau Halatyn wrote: > > Unfortunately, all Valhalla plug-ins are written in the JUCE platform > which, depending on how the developer authors things, can lead to > parameters not responding to the accessibility API. With a control > surface, everything works fine but not with VoiceOver. I know the > developer and will reach out to see if he can do anything about it for > future releases. > Slau > > >> On Mar 28, 2020, at 12:45 PM, Charles wrote: >> >> I have just installed the Valhalla vintage rebirth and the Valhalla >> delay plug-ins. I am using the latest version of ProTools and Mac OS X >> 15. Though I am able to see all the parameters, I’m not able to change >> any of them. Is anybody able to use the Valhalla plug-ins in ProTools? >> >> Sent from my iPhone >> >> -- >> You received this message because you are subscribed to the Google >> Groups "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send >> an email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/CC8AC63F-642A-4336-9E3A-82E20EC2D57F%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/MN2PR22MB1952F76B27CAFBDED99259A1BBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/8EB23231-4F13-40C6-BEB2-8C0840267322%40gmail.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/735DCAB6-2724-4F33-84C4-F7CF6026EA3A%40gmail.com. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/E3A56335-81D0-4782-A5B1-85C24DC8823C%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to
Re: Anybody using the Valhalla vintage reverb plug-in in ProTools?
The thing about the single Faderport is that it doesn't support plug-in automation control, kind of a dealbreaker for most. > On Mar 28, 2020, at 3:33 PM, TheOreoMonster wrote: > > From everything I have seen the FaderPort 8 is the least expensive option for > ProTools users. However people may want to look into how compatible the > FaderPort is with ProTOols if a single fader is sufficient, as it’s > considerably less expensive. > >> On Mar 28, 2020, at 2:14 PM, Slau Halatyn wrote: >> >> Hi Charles, >> I've never been in the market for a compact control surface and I don't >> follow too closely what's available currently. It seems like the Presonus >> Faderport 8 is fairly popular and has a true fader flip mode which is quite >> helpful. Apart from that, it gets pretty expensive very quickly. Perhaps >> some others may have more suggestions. >> Slau >> >> >>> On Mar 28, 2020, at 1:54 PM, Charles wrote: >>> >>> Slau >>> >>> Thank you very much for that info. That is too bad. Since you mentioned >>> control surfaces, is there one that you can recommend for someone who just >>> works by himself at home? >>> >>> Sent from my iPhone >>> On Mar 28, 2020, at 1:37 PM, Slau Halatyn wrote: Unfortunately, all Valhalla plug-ins are written in the JUCE platform which, depending on how the developer authors things, can lead to parameters not responding to the accessibility API. With a control surface, everything works fine but not with VoiceOver. I know the developer and will reach out to see if he can do anything about it for future releases. Slau > On Mar 28, 2020, at 12:45 PM, Charles wrote: > > I have just installed the Valhalla vintage rebirth and the Valhalla delay > plug-ins. I am using the latest version of ProTools and Mac OS X 15. > Though I am able to see all the parameters, I’m not able to change any of > them. Is anybody able to use the Valhalla plug-ins in ProTools? > > Sent from my iPhone > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/CC8AC63F-642A-4336-9E3A-82E20EC2D57F%40gmail.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/MN2PR22MB1952F76B27CAFBDED99259A1BBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/8EB23231-4F13-40C6-BEB2-8C0840267322%40gmail.com. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/735DCAB6-2724-4F33-84C4-F7CF6026EA3A%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/E3A56335-81D0-4782-A5B1-85C24DC8823C%40gmail.com.
Re: Anybody using the Valhalla vintage reverb plug-in in ProTools?
A few blind users are using the Avid C|24 which is still supported but will soon be an end-of-life product. It's pretty expensive as compared with other surfaces. The Avid Eucon surfaces are the best for Pro Tools these days but have limited support for other dAWs and, conversely, other third-party surfaces have great support for other dAWs and limited support for Pro Tools through the Eucon protocol. Slau > On Mar 28, 2020, at 3:11 PM, steve baskis wrote: > > Slau, > > So what control surface do you work on currently? Manufacturer and model? > Sorry, I am sure you have answered this many times, but I am fairly new to > the group. > > Thanks, > Steve B > Baskis.com > >> On Mar 28, 2020, at 14:14, Slau Halatyn wrote: >> >> Hi Charles, >> I've never been in the market for a compact control surface and I don't >> follow too closely what's available currently. It seems like the Presonus >> Faderport 8 is fairly popular and has a true fader flip mode which is quite >> helpful. Apart from that, it gets pretty expensive very quickly. Perhaps >> some others may have more suggestions. >> Slau >> >> >>> On Mar 28, 2020, at 1:54 PM, Charles wrote: >>> >>> Slau >>> >>> Thank you very much for that info. That is too bad. Since you mentioned >>> control surfaces, is there one that you can recommend for someone who just >>> works by himself at home? >>> >>> Sent from my iPhone >>> > On Mar 28, 2020, at 1:37 PM, Slau Halatyn wrote: Unfortunately, all Valhalla plug-ins are written in the JUCE platform which, depending on how the developer authors things, can lead to parameters not responding to the accessibility API. With a control surface, everything works fine but not with VoiceOver. I know the developer and will reach out to see if he can do anything about it for future releases. Slau > On Mar 28, 2020, at 12:45 PM, Charles wrote: > > I have just installed the Valhalla vintage rebirth and the Valhalla delay > plug-ins. I am using the latest version of ProTools and Mac OS X 15. > Though I am able to see all the parameters, I’m not able to change any of > them. Is anybody able to use the Valhalla plug-ins in ProTools? > > Sent from my iPhone > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/CC8AC63F-642A-4336-9E3A-82E20EC2D57F%40gmail.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/MN2PR22MB1952F76B27CAFBDED99259A1BBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/8EB23231-4F13-40C6-BEB2-8C0840267322%40gmail.com. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/7142A6B0-3A6B-4E9D-A94E-9C666FAF44DD%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/8CF7BB52-D9C3-4912-95D7-89EE66542F1D%40gmail.com.
Re: Anybody using the Valhalla vintage reverb plug-in in ProTools?
>From everything I have seen the FaderPort 8 is the least expensive option for >ProTools users. However people may want to look into how compatible the >FaderPort is with ProTOols if a single fader is sufficient, as it’s >considerably less expensive. > On Mar 28, 2020, at 2:14 PM, Slau Halatyn wrote: > > Hi Charles, > I've never been in the market for a compact control surface and I don't > follow too closely what's available currently. It seems like the Presonus > Faderport 8 is fairly popular and has a true fader flip mode which is quite > helpful. Apart from that, it gets pretty expensive very quickly. Perhaps some > others may have more suggestions. > Slau > > >> On Mar 28, 2020, at 1:54 PM, Charles wrote: >> >> Slau >> >> Thank you very much for that info. That is too bad. Since you mentioned >> control surfaces, is there one that you can recommend for someone who just >> works by himself at home? >> >> Sent from my iPhone >> >>> On Mar 28, 2020, at 1:37 PM, Slau Halatyn wrote: >>> >>> Unfortunately, all Valhalla plug-ins are written in the JUCE platform >>> which, depending on how the developer authors things, can lead to >>> parameters not responding to the accessibility API. With a control surface, >>> everything works fine but not with VoiceOver. I know the developer and will >>> reach out to see if he can do anything about it for future releases. >>> Slau >>> >>> On Mar 28, 2020, at 12:45 PM, Charles wrote: I have just installed the Valhalla vintage rebirth and the Valhalla delay plug-ins. I am using the latest version of ProTools and Mac OS X 15. Though I am able to see all the parameters, I’m not able to change any of them. Is anybody able to use the Valhalla plug-ins in ProTools? Sent from my iPhone -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/CC8AC63F-642A-4336-9E3A-82E20EC2D57F%40gmail.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/MN2PR22MB1952F76B27CAFBDED99259A1BBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/8EB23231-4F13-40C6-BEB2-8C0840267322%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/735DCAB6-2724-4F33-84C4-F7CF6026EA3A%40gmail.com.
Re: Anybody using the Valhalla vintage reverb plug-in in ProTools?
Slau, So what control surface do you work on currently? Manufacturer and model? Sorry, I am sure you have answered this many times, but I am fairly new to the group. Thanks, Steve B Baskis.com > On Mar 28, 2020, at 14:14, Slau Halatyn wrote: > > Hi Charles, > I've never been in the market for a compact control surface and I don't > follow too closely what's available currently. It seems like the Presonus > Faderport 8 is fairly popular and has a true fader flip mode which is quite > helpful. Apart from that, it gets pretty expensive very quickly. Perhaps some > others may have more suggestions. > Slau > > >> On Mar 28, 2020, at 1:54 PM, Charles wrote: >> >> Slau >> >> Thank you very much for that info. That is too bad. Since you mentioned >> control surfaces, is there one that you can recommend for someone who just >> works by himself at home? >> >> Sent from my iPhone >> On Mar 28, 2020, at 1:37 PM, Slau Halatyn wrote: >>> >>> Unfortunately, all Valhalla plug-ins are written in the JUCE platform >>> which, depending on how the developer authors things, can lead to >>> parameters not responding to the accessibility API. With a control surface, >>> everything works fine but not with VoiceOver. I know the developer and will >>> reach out to see if he can do anything about it for future releases. >>> Slau >>> >>> On Mar 28, 2020, at 12:45 PM, Charles wrote: I have just installed the Valhalla vintage rebirth and the Valhalla delay plug-ins. I am using the latest version of ProTools and Mac OS X 15. Though I am able to see all the parameters, I’m not able to change any of them. Is anybody able to use the Valhalla plug-ins in ProTools? Sent from my iPhone -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/CC8AC63F-642A-4336-9E3A-82E20EC2D57F%40gmail.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/MN2PR22MB1952F76B27CAFBDED99259A1BBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/8EB23231-4F13-40C6-BEB2-8C0840267322%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/7142A6B0-3A6B-4E9D-A94E-9C666FAF44DD%40gmail.com.
New to protools
Hello everyone, I'm helping my dad (who is blind) with learning Pro Tools. At the moment we are following the mp3 tutorial "Pro Tools With Speech" which is fantastic. We've got this tutorial from a friend, but i've read in this group that there are many other things on dropbox. Is it possible to add us to this? My dropbox email is: netraa...@msn.com. thanks, Maarten -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/c04734b9-e712-41b2-af16-5a2cda6830f4%40googlegroups.com.
Re: Anybody using the Valhalla vintage reverb plug-in in ProTools?
Hi Charles, I've never been in the market for a compact control surface and I don't follow too closely what's available currently. It seems like the Presonus Faderport 8 is fairly popular and has a true fader flip mode which is quite helpful. Apart from that, it gets pretty expensive very quickly. Perhaps some others may have more suggestions. Slau > On Mar 28, 2020, at 1:54 PM, Charles wrote: > > Slau > > Thank you very much for that info. That is too bad. Since you mentioned > control surfaces, is there one that you can recommend for someone who just > works by himself at home? > > Sent from my iPhone > >> On Mar 28, 2020, at 1:37 PM, Slau Halatyn wrote: >> >> Unfortunately, all Valhalla plug-ins are written in the JUCE platform >> which, depending on how the developer authors things, can lead to parameters >> not responding to the accessibility API. With a control surface, everything >> works fine but not with VoiceOver. I know the developer and will reach out >> to see if he can do anything about it for future releases. >> Slau >> >> >>> On Mar 28, 2020, at 12:45 PM, Charles wrote: >>> >>> I have just installed the Valhalla vintage rebirth and the Valhalla delay >>> plug-ins. I am using the latest version of ProTools and Mac OS X 15. Though >>> I am able to see all the parameters, I’m not able to change any of them. Is >>> anybody able to use the Valhalla plug-ins in ProTools? >>> >>> Sent from my iPhone >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/CC8AC63F-642A-4336-9E3A-82E20EC2D57F%40gmail.com. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/MN2PR22MB1952F76B27CAFBDED99259A1BBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/8EB23231-4F13-40C6-BEB2-8C0840267322%40gmail.com.
Re: Anybody using the Valhalla vintage reverb plug-in in ProTools?
Slau Thank you very much for that info. That is too bad. Since you mentioned control surfaces, is there one that you can recommend for someone who just works by himself at home? Sent from my iPhone > On Mar 28, 2020, at 1:37 PM, Slau Halatyn wrote: > > Unfortunately, all Valhalla plug-ins are written in the JUCE platform which, > depending on how the developer authors things, can lead to parameters not > responding to the accessibility API. With a control surface, everything works > fine but not with VoiceOver. I know the developer and will reach out to see > if he can do anything about it for future releases. > Slau > > >> On Mar 28, 2020, at 12:45 PM, Charles wrote: >> >> I have just installed the Valhalla vintage rebirth and the Valhalla delay >> plug-ins. I am using the latest version of ProTools and Mac OS X 15. Though >> I am able to see all the parameters, I’m not able to change any of them. Is >> anybody able to use the Valhalla plug-ins in ProTools? >> >> Sent from my iPhone >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/CC8AC63F-642A-4336-9E3A-82E20EC2D57F%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/MN2PR22MB1952F76B27CAFBDED99259A1BBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com.
Re: Anybody using the Valhalla vintage reverb plug-in in ProTools?
Unfortunately, all Valhalla plug-ins are written in the JUCE platform which, depending on how the developer authors things, can lead to parameters not responding to the accessibility API. With a control surface, everything works fine but not with VoiceOver. I know the developer and will reach out to see if he can do anything about it for future releases. Slau > On Mar 28, 2020, at 12:45 PM, Charles wrote: > > I have just installed the Valhalla vintage rebirth and the Valhalla delay > plug-ins. I am using the latest version of ProTools and Mac OS X 15. Though I > am able to see all the parameters, I’m not able to change any of them. Is > anybody able to use the Valhalla plug-ins in ProTools? > > Sent from my iPhone > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/CC8AC63F-642A-4336-9E3A-82E20EC2D57F%40gmail.com.
Anybody using the Valhalla vintage reverb plug-in in ProTools?
I have just installed the Valhalla vintage rebirth and the Valhalla delay plug-ins. I am using the latest version of ProTools and Mac OS X 15. Though I am able to see all the parameters, I’m not able to change any of them. Is anybody able to use the Valhalla plug-ins in ProTools? Sent from my iPhone -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/MN2PR22MB195208988B665FE0B1E72CDEBBCD0%40MN2PR22MB1952.namprd22.prod.outlook.com.