Ok, I resolved it! Explaining below to close this post. Concerning the Mac
Os X 10.9.5 with Pro Tools 11.3.1 .
Indeed the Bheringer BCF 2000 controler surface works fine, no drivers
needed. It must be set up to Baby HUI profile; and to do this press the pad
below the 5th VPot. (counting from left). And turn on the surface. Done!
Now within Pro Tools; Use Alt m to open the menu, go to the right to Setup,
go down and do enter on periferalls.
Once inside go to the right and select the Midi controlers tab, use VO
space bar.
Go to the right and once on top of the title , go down once and open the
list menu and select HUI.
Go to the right once, on return , go down open the list menu and select BCF
2000 port 1. Do exactly the same on send.
Go to the right and make sure is selected number eight, concerns to 8
faders. Press ok and you will probably listen the motorized faders going
crazy, their reposition at the defined volume values.
Regards, Rui Vilarinho
- Original Message -
From: "Rui Vilarinho" <ruia...@hotmail.com>
To: <ptaccess@googlegroups.com>
Sent: Tuesday, September 08, 2015 3:45 PM
Subject: Bheringer BCF 2000 Control surface how to enable it?
Hi, concerning the BCF 2000 within Pro Tools 11.3.1.
It's sett up to Baby WUI mode and i confirm that it's being shown within
Midi devices with both ports 1 and 2 enable.
But since nothing... what I yet need to enable to control Pro Tools?
Thanks, Rui Vilarinho
--
You received this message because you are subscribed to the Google Groups
"Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Pro Tools
Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
