mi madre es peruana y mi padre es escosés pero la mayoría de mi vida he
pasado en los estados unidos... asi que, para evitar malentendidos, uso
ingles en discuccioes tecnicas
Saludos
R
Juan A Fuentes Bermudez wrote:
no me digas que hablas español?
saludos
- Original Message -
*From:* Richard Geddes mailto:[EMAIL PROTECTED]
*To:* General PulseAudio Discussion
mailto:pulseaudio-discuss@mail.0pointer.de
*Sent:* Tuesday, June 03, 2008 11:56 PM
*Subject:* Re: [pulseaudio-discuss] Help in setting up PA... SOLVED
de nada... fue un placer... tambien aprendi algo...
Saludos
R
Juan A Fuentes Bermudez wrote:
hi, very very thank you,
now i am using the last configuration that you say me, now are 3
cards actives, only the HDMI is not working via PA,
i will trying coment and uncoment one to one devices, i am think
that HDMI device only have output not have input
very very thank my friend
you have a spanish jamon fron my :)
- Original Message -
*From:* Richard Geddes mailto:[EMAIL PROTECTED]
*To:* General PulseAudio Discussion
mailto:pulseaudio-discuss@mail.0pointer.de
*Sent:* Tuesday, June 03, 2008 10:24 PM
*Subject:* Re: [pulseaudio-discuss] Help in setting up PA...
SOLVED
ok...
1) The/var/log/messages indicates that you are running the pa
server as root (you say as well) and it also says the pa
server is not intended to be run as root... so you might want
to change to a regular user and use sudo for root related
activities.
2) I think that the terjeta 3 requires some special
parameters ... similar to tarjeta 2. I'm not familiar with
ice1724 device driver, but you may want to try the same setup
for tarjeta 3 as for tarjeta 2. This is just a guess...
anyone with knowledge about how to setup an ice1724
source/sink in pa... please speak up now...
3) Of course, it looks like tarjeta 3 was identified by the
module-detect/module-hal-detect. What we've done is disable
this and tried to set the sources/sinks manually.
module-detect/module-hal-detect seems to be an all or nothing
proposition... if anyone knows of a way to auto-detect
specific devices and manually set others in the same config
file... please speak up now.
Well, you might want to try this (once again, a guess):
a) re-enable the auto-detect - we know this will detect
tarjeta 0 and 3, and not tarjeta 1 and 2
b) add only the manual configuration for tarjeta 2, after
that
So your default.pa file would contain:
### Automatically load driver modules depending on the
hardware available
.ifexists module-hal-detect.so
load-module module-hal-detect
.else
### Alternatively use the static hardware detection module
(for systems that
### lack HAL support)
load-module module-detect
.endif
# Load the devices:
#load-module module-alsa-sink sink_name=nvidia_out device=hw:0
#load-module module-alsa-source source_name=nvidia_in device=hw:0
#load-module module-alsa-sink sink_name=hdmi_out device=hw:1
#load-module module-alsa-source source_name=hdmi_in device=hw:1
load-module module-alsa-sink sink_name=ewx2496_out
device=hw:2 channels=10
channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7
load-module module-alsa-source source_name=ewx2496_in
device=hw:2 channels=12
channel_map=left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9
#load-module module-alsa-sink sink_name=e192m_out device=hw:3
#load-module module-alsa-source source_name=e192m_in device=hw:3
# Select default device
#set-default-sink nvidia_out
#set-default-source nvidia_in
Let's see if module-hal-detect/module-detect allows manual
loading of sources/sinks.
R
Juan A Fuentes Bermudez wrote:
hi, the problem is partial solved
i an coment and paste the module taht you say my
the pa server not start after reboot,
i am coment and uncoment one to one, to discart waht is the
card tthat cause problem ,
# Load the devices:
load-module module-alsa-sink sink_name=nvidia_out device=hw:0
load-module module-alsa-source source_name=nvidia_in device=hw:0
#load-module module-alsa-sink sink_name=hdmi_out device=hw:1
#load-module module-alsa-source source_name=hdmi_in device=hw:1
load-module module-alsa-sink sink_name=ewx2496_out
device=hw:2 channels=10
