[Qemu-devel] [Bug 1588591] Re: Qemu 2.6 Solaris 8 Sparc telnet terminate itself
Nope. Not anymore. I shall close this. Thanks! ** Changed in: qemu Status: Incomplete => Fix Released -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588591 Title: Qemu 2.6 Solaris 8 Sparc telnet terminate itself Status in QEMU: Fix Released Bug description: With Qemu 2.6, Solaris 8 can be installed and run. However, it sometimes terminate itself with I/O thread spun for 1000 iterations. qemu-system-sparc -nographic -monitor null -serial mon:telnet:0.0.0.0:3000,server -hda ./Sparc8.disk -m 256 -boot c -net nic,macaddr=52:54:0:12:34:56 -net tap,ifname=tap0,script=no,downscript=noQEMU waiting for connection on: disconnected:telnet:0.0.0.0:3000,server main-loop: WARNING: I/O thread spun for 1000 iterations To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1588591/+subscriptions
[Qemu-devel] [Bug 1539940] Re: Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu
** Changed in: qemu Status: New => Fix Released -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1539940 Title: Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu Status in QEMU: Fix Released Bug description: Qemu command: qemu-system-sparc -nographic -monitor null -serial mon:telnet:localhost:3000,server -bios ../../Downloads/ss20_v2.25_rom -M SS-20 -hda ./solsparc -m 512 -cdrom ./sol-9-905hw-ga-sparc-dvd.iso -boot d -cpu "TI SuperSparc 60" -net nic,vlan=1,macaddr=52:54:0:12:34:56 when i do disk2:d, the system loads until the terminal type menu. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode And nothing happens after that. Anyone encountered this issue? To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1539940/+subscriptions
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault
Hi Mark, We are finally in:) By the way, how do you figure out which slice its in? >From solaris 8 dvd onwards, i seems to see 2 disk label options: SMI and EFI. Not sure why you didnt see those. 0 > boot disk:a Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0:a Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. configuring IPv4 interfaces: le0. starting DHCP on primary interface le0 Hostname: unknown The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c0t0d0s7: is logging. starting rpc services: rpcbind done. syslog service starting. syslogd: line 24: WARNING: loghost could not be resolved Jul 3 14:06:40 unknown sendmail[239]: My unqualified host name (unknown) unknown; sleeping for retry Jul 3 14:06:40 unknown sendmail[240]: My unqualified host name (unknown) unknown; sleeping for retry volume management starting. Creating new rsa public/private host key pair Creating new dsa public/private host key pair Jul 3 14:06:54 unknown snmpXdmid: Error in Adding Row for Subscription Table Entry Jul 3 14:06:55 unknown snmpXdmid: Failed to add filter to SP for Event delivery The system is ready. unknown console login: root Password: Jul 3 14:07:09 unknown login: ROOT LOGIN /dev/console Sun Microsystems Inc. SunOS 5.9 Generic May 2002 # ls bin etc lib opt tmp xfn cdrom export lost+found platformusr dev homemnt procvar devices kernel net sbinvol # Jul 3 14:07:41 unknown sendmail[240]: unable to qualify my own domain name (unknown) -- using short name Jul 3 14:07:41 unknown sendmail[240]: [ID 702911 mail.alert] unable to qualify my own domain name (unknown) -- using short name Jul 3 14:07:46 unknown sendmail[239]: unable to qualify my own domain name (unknown) -- using short name Jul 3 14:07:46 unknown sendmail[239]: [ID 702911 mail.alert] unable to qualify my own domain name (unknown) -- using short name -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588328 Title: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Status in QEMU: Fix Committed Bug description: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. WARNING: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 (sd0): Corrupt label; wrong magic number Segmentation Fault Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Segmentation Fault Using RPC Bootparams for network configuration information. Skipping interface le0 Searching for configuration file(s)... Search complete. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode /sbin/disk0_install[109]: 143 Segmentation Fault /sbin/run_install[130]: 155 Segmentation Fault To manage notifications
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault
Hi Mark, I have tried boot diisk:d. After this Not a bootable ELF image Not a bootable a.out image No valid state has been set by load or init-program 0 > boot disk:d No valid state has been set by load or init-program ok 0 > Somehow I am getting invalid boot -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588328 Title: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Status in QEMU: Fix Committed Bug description: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. WARNING: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 (sd0): Corrupt label; wrong magic number Segmentation Fault Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Segmentation Fault Using RPC Bootparams for network configuration information. Skipping interface le0 Searching for configuration file(s)... Search complete. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode /sbin/disk0_install[109]: 143 Segmentation Fault /sbin/run_install[130]: 155 Segmentation Fault To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault
Hi Mark, Thanks for the update. I would definitely be nice to have other than the black screen. Still got a problem though. I managed to install sparc9 but after i removed the cdrom, it fails to boot. qemu-system-sparc -nographic -monitor null -serial mon:telnet:0.0.0.0:3000,server -hda ./Sparc9.disk -m 256 -net nic,macaddr=52:54:0:12:34:56 -net tap,ifname=tap0,script=no,downscript=no >From an article written by Artyom, i did add # cat >> /a/etc/system set scsi_options=0x58 ^d to solaris 2.6. However, i think i didnt do this with solaris 8, it works fine. For the solaris 9, it will allow you to either set it to not reboot but once you reached the end of the installation, it will reboot when you press enter. And the Sparc9.disk cannot be booted :( telnet 0.0.0.0 3000 Trying 0.0.0.0... Connected to 0.0.0.0. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying disk... Not a bootable ELF image Not a bootable a.out image No valid state has been set by load or init-program 0 > -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588328 Title: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Status in QEMU: Fix Committed Bug description: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. WARNING: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 (sd0): Corrupt label; wrong magic number Segmentation Fault Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Segmentation Fault Using RPC Bootparams for network configuration information. Skipping interface le0 Searching for configuration file(s)... Search complete. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode /sbin/disk0_install[109]: 143 Segmentation Fault /sbin/run_install[130]: 155 Segmentation Fault To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault
** Changed in: qemu Status: New => Fix Committed -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588328 Title: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Status in QEMU: Fix Committed Bug description: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. WARNING: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 (sd0): Corrupt label; wrong magic number Segmentation Fault Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Segmentation Fault Using RPC Bootparams for network configuration information. Skipping interface le0 Searching for configuration file(s)... Search complete. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode /sbin/disk0_install[109]: 143 Segmentation Fault /sbin/run_install[130]: 155 Segmentation Fault To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault
** Changed in: qemu Status: Fix Committed => Fix Released ** Changed in: qemu Status: Fix Released => New -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588328 Title: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Status in QEMU: New Bug description: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. WARNING: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 (sd0): Corrupt label; wrong magic number Segmentation Fault Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Segmentation Fault Using RPC Bootparams for network configuration information. Skipping interface le0 Searching for configuration file(s)... Search complete. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode /sbin/disk0_install[109]: 143 Segmentation Fault /sbin/run_install[130]: 155 Segmentation Fault To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault
Hi Mark, Thanks a lot. Got it working now. When formatting the label, there are 2 options, SMI and EFI. Once I format it with SMI, it seems to be able to find the disk. -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588328 Title: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Status in QEMU: New Bug description: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. WARNING: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 (sd0): Corrupt label; wrong magic number Segmentation Fault Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Segmentation Fault Using RPC Bootparams for network configuration information. Skipping interface le0 Searching for configuration file(s)... Search complete. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode /sbin/disk0_install[109]: 143 Segmentation Fault /sbin/run_install[130]: 155 Segmentation Fault To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault
May 11 2016. qemu-2.6.0 from http://wiki.qemu.org/Download -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588328 Title: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Status in QEMU: New Bug description: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. WARNING: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 (sd0): Corrupt label; wrong magic number Segmentation Fault Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Segmentation Fault Using RPC Bootparams for network configuration information. Skipping interface le0 Searching for configuration file(s)... Search complete. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode /sbin/disk0_install[109]: 143 Segmentation Fault /sbin/run_install[130]: 155 Segmentation Fault To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault
Hmm.. strange. I did make a new disk went into the setup, then format the disk. After that, i rebooted and start that installation. But, it seems still there is no disk detected. Media [1]: 1 Reading disc for Solaris Operating Environment... The system is being initialized, please wait... | No Disks found. Check to make sure disks are cabled and powered up. Press OK to Exit. /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 Specify disk (enter its number): 0 AVAILABLE DRIVE TYPES: 0. Auto configure 1. Quantum ProDrive 80S 2. Quantum ProDrive 105S 3. CDC Wren IV 94171-344 4. SUN0104 5. SUN0207 6. SUN0327 7. SUN0340 8. SUN0424 9. SUN0535 10. SUN0669 11. SUN1.0G 12. SUN1.05 13. SUN1.3G 14. SUN2.1G 15. SUN2.9G 16. Zip 100 17. Zip 250 18. other Specify disk type (enter its number): 18 Enter number of data cylinders: 24620 Enter number of alternate cylinders[2]: Enter number of physical cylinders[24622]: Enter number of heads: 27 Enter physical number of heads[default]: 107 Enter number of data sectors/track: 107 Enter number of physical sectors/track[default]: Enter rpm of drive[3600]: Enter format time[default]: Enter cylinder skew[default]: Enter track skew[default]: Enter tracks per zone[default]: Enter alternate tracks[default]: Enter alternate sectors[default]: Enter cache control[default]: Enter prefetch threshold[default]: Enter minimum prefetch[default]: Enter maximum prefetch[default]: Enter disk type name (remember quotes): Sparc9 selecting c0t0d0 [disk formatted] FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current- describe the current disk format - format and analyze the disk repair - repair a defective sector label - write label to the disk analyze- surface analysis defect - defect list management backup - search for backup labels verify - read and display labels save - save new disk/partition definitions inquiry- show vendor, product and revision scsi - independent SCSI mode selects cache - enable, disable or query SCSI disk cache volname- set 8-character volume name ! - execute , then return quit format> label [0] SMI Label [1] EFI Label Specify Label type[0]: 1 Ready to label disk, continue?y format> q #reboot Jun 28 23:37:16 rpcbind: rpcbind terminating on signal. syncing file systems... done rebooting... rebooting () Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Please specify the media from which you will install the Solaris Operating Environment. Media: 1. CD/DVD 2. Network File System 3. HTTP (Flash archive only) 4. FTP (Flash archive only) 5. Local Tape (Flash archive only) Media [1]: 1 Reading disc for Solaris Operating Environment... The system is being initialized, please wait... -^[[6|^R ^[[/ No Disks found. Check to make sure disks are cabled and powered up. Press OK to Exit. -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588328 Title: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Status in QEMU: New Bug description: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault
Hi all, Thanks for the patch. I just tried, it seems to be not able to find the disk when it try to start the installation. :( ... Please specify the media from which you will install the Solaris Operating Environment. Media: 1. CD/DVD 2. Network File System 3. HTTP (Flash archive only) 4. FTP (Flash archive only) 5. Local Tape (Flash archive only) Media [1]: 1 Reading disc for Solaris Operating Environment... The system is being initialized, please wait... / No Disks found. Check to make sure disks are cabled and powered up. -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588328 Title: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Status in QEMU: New Bug description: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. WARNING: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 (sd0): Corrupt label; wrong magic number Segmentation Fault Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Segmentation Fault Using RPC Bootparams for network configuration information. Skipping interface le0 Searching for configuration file(s)... Search complete. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode /sbin/disk0_install[109]: 143 Segmentation Fault /sbin/run_install[130]: 155 Segmentation Fault To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault
Hi Mark, Attached is the new link: https://mega.nz/#!94ZVXBra!8QMsQ2d9eKKkMuawg_0YelfyWTy47CyyD1f6tvSv1bQ -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588328 Title: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Status in QEMU: New Bug description: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. WARNING: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 (sd0): Corrupt label; wrong magic number Segmentation Fault Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Segmentation Fault Using RPC Bootparams for network configuration information. Skipping interface le0 Searching for configuration file(s)... Search complete. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode /sbin/disk0_install[109]: 143 Segmentation Fault /sbin/run_install[130]: 155 Segmentation Fault To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault
Hi Mark, I have uploaded a copy of it to mega.nz https://mega.nz/#!94ZVXBra -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588328 Title: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Status in QEMU: New Bug description: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. WARNING: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 (sd0): Corrupt label; wrong magic number Segmentation Fault Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Segmentation Fault Using RPC Bootparams for network configuration information. Skipping interface le0 Searching for configuration file(s)... Search complete. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode /sbin/disk0_install[109]: 143 Segmentation Fault /sbin/run_install[130]: 155 Segmentation Fault To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions
[Qemu-devel] [Bug 1588328] Re: Qemu 2.6 Solaris 9 Sparc Segmentation Fault
Hi Mark, I compared the cksum provided and the dvd cksum that i did, seems to match. I did try out Solaris 8 too. It seems to work fine with sun formatted hda disk. I did try removing the -hda for solaris 9, the problem still persist. I shall find if i can get another solaris 9 image source to try out. -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588328 Title: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Status in QEMU: New Bug description: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. WARNING: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 (sd0): Corrupt label; wrong magic number Segmentation Fault Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Segmentation Fault Using RPC Bootparams for network configuration information. Skipping interface le0 Searching for configuration file(s)... Search complete. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode /sbin/disk0_install[109]: 143 Segmentation Fault /sbin/run_install[130]: 155 Segmentation Fault To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1588328/+subscriptions
[Qemu-devel] [Bug 1588591] [NEW] Qemu 2.6 Solaris 8 Sparc telnet terminate itself
Public bug reported: With Qemu 2.6, Solaris 8 can be installed and run. However, it sometimes terminate itself with I/O thread spun for 1000 iterations. qemu-system-sparc -nographic -monitor null -serial mon:telnet:0.0.0.0:3000,server -hda ./Sparc8.disk -m 256 -boot c -net nic,macaddr=52:54:0:12:34:56 -net tap,ifname=tap0,script=no,downscript=noQEMU waiting for connection on: disconnected:telnet:0.0.0.0:3000,server main-loop: WARNING: I/O thread spun for 1000 iterations ** Affects: qemu Importance: Undecided Status: New -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588591 Title: Qemu 2.6 Solaris 8 Sparc telnet terminate itself Status in QEMU: New Bug description: With Qemu 2.6, Solaris 8 can be installed and run. However, it sometimes terminate itself with I/O thread spun for 1000 iterations. qemu-system-sparc -nographic -monitor null -serial mon:telnet:0.0.0.0:3000,server -hda ./Sparc8.disk -m 256 -boot c -net nic,macaddr=52:54:0:12:34:56 -net tap,ifname=tap0,script=no,downscript=noQEMU waiting for connection on: disconnected:telnet:0.0.0.0:3000,server main-loop: WARNING: I/O thread spun for 1000 iterations To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1588591/+subscriptions
[Qemu-devel] [Bug 1588328] [NEW] Qemu 2.6 Solaris 9 Sparc Segmentation Fault
Public bug reported: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. WARNING: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 (sd0): Corrupt label; wrong magic number Segmentation Fault Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Segmentation Fault Using RPC Bootparams for network configuration information. Skipping interface le0 Searching for configuration file(s)... Search complete. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode /sbin/disk0_install[109]: 143 Segmentation Fault /sbin/run_install[130]: 155 Segmentation Fault ** Affects: qemu Importance: Undecided Status: New -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1588328 Title: Qemu 2.6 Solaris 9 Sparc Segmentation Fault Status in QEMU: New Bug description: Hi, I tried the following command to boot Solaris 9 sparc: qemu-system-sparc -nographic -boot d -hda ./Spark9.disk -m 256 -cdrom sol-9-905hw-ga-sparc-dvd.iso -serial telnet:0.0.0.0:3000,server It seems there are a few Segmentation Faults, one from the starting of the boot. Another at the beginning of the commandline installation. Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Configuration device id QEMU version 1 machine id 32 Probing SBus slot 0 offset 0 Probing SBus slot 1 offset 0 Probing SBus slot 2 offset 0 Probing SBus slot 3 offset 0 Probing SBus slot 4 offset 0 Probing SBus slot 5 offset 0 Invalid FCode start byte CPUs: 1 x FMI,MB86904 UUID: ---- Welcome to OpenBIOS v1.1 built on Apr 18 2016 08:19 Type 'help' for detailed information Trying cdrom:d... Not a bootable ELF image Loading a.out image... Loaded 7680 bytes entry point is 0x4000 bootpath: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@2,0:d Jumping to entry point 4000 for type 0005... switching to new context: SunOS Release 5.9 Version Generic_118558-34 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. WARNING: /iommu@0,1000/sbus@0,10001000/espdma@5,840/esp@5,880/sd@0,0 (sd0): Corrupt label; wrong magic number Segmentation Fault Configuring /dev and /devices NOTICE: Couldn't set value (../../sun/io/audio/sada/drv/audiocs/audio_4231.c, Line #1759 0x00 0x88) audio may not work correctly until it is stopped and restarted Segmentation Fault Using RPC Bootparams for network configuration information. Skipping interface le0 Searching for configuration file(s)... Search complete. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode /sbin/disk0_install[109]: 143
[Qemu-devel] [Bug 1539940] Re: Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu
Looks bad before i did setenv sbus-probe-list f Probing Memory Bank #7 64 Megabytes of DRAM Incorrect configuration checksum; Setting NVRAM parameters to default values. Setting diag-switch? NVRAM parameter to true Probing /iommu@f,e000/sbus@f,e0001000 at f,0 espdma esp sd st ledma le SUNW,bpp Probing /iommu@f,e000/sbus@f,e0001000 at e,0 Probing /iommu@f,e000/sbus@f,e0001000 at 0,0 Nothing there Probing /iommu@f,e000/sbus@f,e0001000 at 1,0 Nothing there Probing /iommu@f,e000/sbus@f,e0001000 at 2,0 Nothing there Probing /iommu@f,e000/sbus@f,e0001000 at 3,0 Nothing there after: Probing Memory Bank #7 64 Megabytes of DRAM Probing /iommu@f,e000/sbus@f,e0001000 at f,0 espdma esp sd st ledma le SUNW,bpp SPARCstation 20 (1 X 390Z50), No Keyboard ROM Rev. 2.25, 512 MB memory installed, Serial #0. -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1539940 Title: Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu Status in QEMU: New Bug description: Qemu command: qemu-system-sparc -nographic -monitor null -serial mon:telnet:localhost:3000,server -bios ../../Downloads/ss20_v2.25_rom -M SS-20 -hda ./solsparc -m 512 -cdrom ./sol-9-905hw-ga-sparc-dvd.iso -boot d -cpu "TI SuperSparc 60" -net nic,vlan=1,macaddr=52:54:0:12:34:56 when i do disk2:d, the system loads until the terminal type menu. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode And nothing happens after that. Anyone encountered this issue? To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1539940/+subscriptions
[Qemu-devel] [Bug 1539940] [NEW] Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu
Public bug reported: Qemu command: qemu-system-sparc -nographic -monitor null -serial mon:telnet:localhost:3000,server -bios ../../Downloads/ss20_v2.25_rom -M SS-20 -hda ./solsparc -m 512 -cdrom ./sol-9-905hw-ga-sparc-dvd.iso -boot d -cpu "TI SuperSparc 60" -net nic,vlan=1,macaddr=52:54:0:12:34:56 when i do disk2:d, the system loads until the terminal type menu. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode And nothing happens after that. Anyone encountered this issue? ** Affects: qemu Importance: Undecided Status: New -- You received this bug notification because you are a member of qemu- devel-ml, which is subscribed to QEMU. https://bugs.launchpad.net/bugs/1539940 Title: Qemu 2.5 Solaris 8 and 9 sparc hang after terminal type menu Status in QEMU: New Bug description: Qemu command: qemu-system-sparc -nographic -monitor null -serial mon:telnet:localhost:3000,server -bios ../../Downloads/ss20_v2.25_rom -M SS-20 -hda ./solsparc -m 512 -cdrom ./sol-9-905hw-ga-sparc-dvd.iso -boot d -cpu "TI SuperSparc 60" -net nic,vlan=1,macaddr=52:54:0:12:34:56 when i do disk2:d, the system loads until the terminal type menu. What type of terminal are you using? 1) ANSI Standard CRT 2) DEC VT52 3) DEC VT100 4) Heathkit 19 5) Lear Siegler ADM31 6) PC Console 7) Sun Command Tool 8) Sun Workstation 9) Televideo 910 10) Televideo 925 11) Wyse Model 50 12) X Terminal Emulator (xterms) 13) CDE Terminal Emulator (dtterm) 14) Other Type the number of your choice and press Return: 3 syslog service starting. savecore: no dump device configured Running in command line mode And nothing happens after that. Anyone encountered this issue? To manage notifications about this bug go to: https://bugs.launchpad.net/qemu/+bug/1539940/+subscriptions
