Re: [Qemu-devel] [PATCH v4] qemu-char: don't issue CHR_EVENT_OPEN in a BH
On Tue, 4 Jun 2013 16:35:09 -0500 Michael Roth mdr...@linux.vnet.ibm.com wrote: When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET, and it was issued as a bottom-half: 86e94dea5b740dad65446c857f6959eae43e0ba6 Which we basically used to print out a greeting/prompt for the monitor. AFAICT the only reason this was ever done in a BH was because in some cases we'd modify the chr_write handler for a new chardev backend *after* the site where we issued the reset (see: 86e94d:qemu_chr_open_stdio()) At some point this event was renamed to CHR_EVENT_OPENED, and we've maintained the use of this BH ever since. However, due to 9f939df955a4152aad69a19a77e0898631bb2c18, we schedule the BH via g_idle_add(), which is causing events to sometimes be delivered after we've already begun processing data from backends, leading to: known bugs: QMP: session negotation resets with OPENED event, in some cases this is causing new sessions to get sporadically reset potential bugs: hw/usb/redirect.c: can_read handler checks for dev-parser != NULL, which may be true if CLOSED BH has not been executed yet. In the past, OPENED quiesced outstanding CLOSED events prior to us reading client data. If it's delayed, our check may allow reads to occur even though we haven't processed the OPENED event yet, and when we do finally get the OPENED event, our state may get reset. qtest.c: can begin session before OPENED event is processed, leading to a spurious reset of the system and irq_levels gdbstub.c: may start a gdb session prior to the machine being paused To fix these, let's just drop the BH. Since the initial reasoning for using it still applies to an extent, work around that by deferring the delivery of CHR_EVENT_OPENED until after the chardevs have been fully initialized, toward the end of qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This defers delivery long enough that we can be assured a CharDriverState is fully initialized before CHR_EVENT_OPENED is sent. Also, rather than requiring each chardev to do an explicit open, do it automatically, and allow the small few who don't desire such behavior to suppress the OPENED-on-init behavior by setting a 'explicit_be_open' flag. We additionally add missing OPENED events for stdio backends on w32, which were previously not being issued, causing us to not recieve the banner and initial prompts for qmp/hmp. Reported-by: Stefan Priebe s.pri...@profihost.ag Cc: qemu-sta...@nongnu.org Signed-off-by: Michael Roth mdr...@linux.vnet.ibm.com I don't know if the QMP queue is the ideal queue for this patch, but I'd happily apply it if I get at least one Reviewed-by from the CC'ed people. --- v3-v4: * renamed 'suppress_be_open_on_init' to 'explicit_be_open' to match existing 'explicit_fe_open' flag (Hans) * added missing 'explicit_be_open' flags for spice vmc/port and msmouse backends v2-v3: * removed artifact in from v1 in backends/baum.c, test build with BRLAPI=y (Anthony) * rebased on latest origin/master v1-v2: * default to sending OPENED on backend init, add flag to suppress it (Anthony) * fix missing OPENED for stdio backends on w32 * fix missing OPENED when qemu_chr_new_from_opts() doesn't use qmp_chardev_add() * clean up/update commit message backends/baum.c |2 -- backends/msmouse.c|1 + include/sysemu/char.h |2 +- qemu-char.c | 38 +- spice-qemu-char.c |1 + ui/console.c |1 - ui/gtk.c |1 - 7 files changed, 20 insertions(+), 26 deletions(-) diff --git a/backends/baum.c b/backends/baum.c index 4cba79f..62aa784 100644 --- a/backends/baum.c +++ b/backends/baum.c @@ -611,8 +611,6 @@ CharDriverState *chr_baum_init(void) qemu_set_fd_handler(baum-brlapi_fd, baum_chr_read, NULL, baum); -qemu_chr_be_generic_open(chr); - return chr; fail: diff --git a/backends/msmouse.c b/backends/msmouse.c index 0ac05a0..c0dbfcd 100644 --- a/backends/msmouse.c +++ b/backends/msmouse.c @@ -70,6 +70,7 @@ CharDriverState *qemu_chr_open_msmouse(void) chr = g_malloc0(sizeof(CharDriverState)); chr-chr_write = msmouse_chr_write; chr-chr_close = msmouse_chr_close; +chr-explicit_be_open = true; qemu_add_mouse_event_handler(msmouse_event, chr, 0, QEMU Microsoft Mouse); diff --git a/include/sysemu/char.h b/include/sysemu/char.h index 5e42c90..066c216 100644 --- a/include/sysemu/char.h +++ b/include/sysemu/char.h @@ -70,12 +70,12 @@ struct CharDriverState { void (*chr_set_echo)(struct CharDriverState *chr, bool echo); void (*chr_set_fe_open)(struct CharDriverState *chr, int fe_open); void *opaque; -int idle_tag; char *label; char *filename; int be_open; int fe_open; int
Re: [Qemu-devel] [PATCH v4] qemu-char: don't issue CHR_EVENT_OPEN in a BH
On Fri, Jun 07, 2013 at 09:50:39AM -0400, Luiz Capitulino wrote: On Tue, 4 Jun 2013 16:35:09 -0500 Michael Roth mdr...@linux.vnet.ibm.com wrote: When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET, and it was issued as a bottom-half: 86e94dea5b740dad65446c857f6959eae43e0ba6 Which we basically used to print out a greeting/prompt for the monitor. AFAICT the only reason this was ever done in a BH was because in some cases we'd modify the chr_write handler for a new chardev backend *after* the site where we issued the reset (see: 86e94d:qemu_chr_open_stdio()) At some point this event was renamed to CHR_EVENT_OPENED, and we've maintained the use of this BH ever since. However, due to 9f939df955a4152aad69a19a77e0898631bb2c18, we schedule the BH via g_idle_add(), which is causing events to sometimes be delivered after we've already begun processing data from backends, leading to: known bugs: QMP: session negotation resets with OPENED event, in some cases this is causing new sessions to get sporadically reset potential bugs: hw/usb/redirect.c: can_read handler checks for dev-parser != NULL, which may be true if CLOSED BH has not been executed yet. In the past, OPENED quiesced outstanding CLOSED events prior to us reading client data. If it's delayed, our check may allow reads to occur even though we haven't processed the OPENED event yet, and when we do finally get the OPENED event, our state may get reset. qtest.c: can begin session before OPENED event is processed, leading to a spurious reset of the system and irq_levels gdbstub.c: may start a gdb session prior to the machine being paused To fix these, let's just drop the BH. Since the initial reasoning for using it still applies to an extent, work around that by deferring the delivery of CHR_EVENT_OPENED until after the chardevs have been fully initialized, toward the end of qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This defers delivery long enough that we can be assured a CharDriverState is fully initialized before CHR_EVENT_OPENED is sent. Also, rather than requiring each chardev to do an explicit open, do it automatically, and allow the small few who don't desire such behavior to suppress the OPENED-on-init behavior by setting a 'explicit_be_open' flag. We additionally add missing OPENED events for stdio backends on w32, which were previously not being issued, causing us to not recieve the banner and initial prompts for qmp/hmp. Reported-by: Stefan Priebe s.pri...@profihost.ag Cc: qemu-sta...@nongnu.org Signed-off-by: Michael Roth mdr...@linux.vnet.ibm.com I don't know if the QMP queue is the ideal queue for this patch, but I'd happily apply it if I get at least one Reviewed-by from the CC'ed people. Anthony actually added his Reviewed-by for v3, but I forgot to roll it in the commit. If you do take it in through your tree can you add that? Thanks! --- v3-v4: * renamed 'suppress_be_open_on_init' to 'explicit_be_open' to match existing 'explicit_fe_open' flag (Hans) * added missing 'explicit_be_open' flags for spice vmc/port and msmouse backends v2-v3: * removed artifact in from v1 in backends/baum.c, test build with BRLAPI=y (Anthony) * rebased on latest origin/master v1-v2: * default to sending OPENED on backend init, add flag to suppress it (Anthony) * fix missing OPENED for stdio backends on w32 * fix missing OPENED when qemu_chr_new_from_opts() doesn't use qmp_chardev_add() * clean up/update commit message backends/baum.c |2 -- backends/msmouse.c|1 + include/sysemu/char.h |2 +- qemu-char.c | 38 +- spice-qemu-char.c |1 + ui/console.c |1 - ui/gtk.c |1 - 7 files changed, 20 insertions(+), 26 deletions(-) diff --git a/backends/baum.c b/backends/baum.c index 4cba79f..62aa784 100644 --- a/backends/baum.c +++ b/backends/baum.c @@ -611,8 +611,6 @@ CharDriverState *chr_baum_init(void) qemu_set_fd_handler(baum-brlapi_fd, baum_chr_read, NULL, baum); -qemu_chr_be_generic_open(chr); - return chr; fail: diff --git a/backends/msmouse.c b/backends/msmouse.c index 0ac05a0..c0dbfcd 100644 --- a/backends/msmouse.c +++ b/backends/msmouse.c @@ -70,6 +70,7 @@ CharDriverState *qemu_chr_open_msmouse(void) chr = g_malloc0(sizeof(CharDriverState)); chr-chr_write = msmouse_chr_write; chr-chr_close = msmouse_chr_close; +chr-explicit_be_open = true; qemu_add_mouse_event_handler(msmouse_event, chr, 0, QEMU Microsoft Mouse); diff --git a/include/sysemu/char.h b/include/sysemu/char.h index 5e42c90..066c216 100644 ---
Re: [Qemu-devel] [PATCH v4] qemu-char: don't issue CHR_EVENT_OPEN in a BH
On Fri, 7 Jun 2013 09:56:00 -0500 mdroth mdr...@linux.vnet.ibm.com wrote: On Fri, Jun 07, 2013 at 09:50:39AM -0400, Luiz Capitulino wrote: On Tue, 4 Jun 2013 16:35:09 -0500 Michael Roth mdr...@linux.vnet.ibm.com wrote: When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET, and it was issued as a bottom-half: 86e94dea5b740dad65446c857f6959eae43e0ba6 Which we basically used to print out a greeting/prompt for the monitor. AFAICT the only reason this was ever done in a BH was because in some cases we'd modify the chr_write handler for a new chardev backend *after* the site where we issued the reset (see: 86e94d:qemu_chr_open_stdio()) At some point this event was renamed to CHR_EVENT_OPENED, and we've maintained the use of this BH ever since. However, due to 9f939df955a4152aad69a19a77e0898631bb2c18, we schedule the BH via g_idle_add(), which is causing events to sometimes be delivered after we've already begun processing data from backends, leading to: known bugs: QMP: session negotation resets with OPENED event, in some cases this is causing new sessions to get sporadically reset potential bugs: hw/usb/redirect.c: can_read handler checks for dev-parser != NULL, which may be true if CLOSED BH has not been executed yet. In the past, OPENED quiesced outstanding CLOSED events prior to us reading client data. If it's delayed, our check may allow reads to occur even though we haven't processed the OPENED event yet, and when we do finally get the OPENED event, our state may get reset. qtest.c: can begin session before OPENED event is processed, leading to a spurious reset of the system and irq_levels gdbstub.c: may start a gdb session prior to the machine being paused To fix these, let's just drop the BH. Since the initial reasoning for using it still applies to an extent, work around that by deferring the delivery of CHR_EVENT_OPENED until after the chardevs have been fully initialized, toward the end of qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This defers delivery long enough that we can be assured a CharDriverState is fully initialized before CHR_EVENT_OPENED is sent. Also, rather than requiring each chardev to do an explicit open, do it automatically, and allow the small few who don't desire such behavior to suppress the OPENED-on-init behavior by setting a 'explicit_be_open' flag. We additionally add missing OPENED events for stdio backends on w32, which were previously not being issued, causing us to not recieve the banner and initial prompts for qmp/hmp. Reported-by: Stefan Priebe s.pri...@profihost.ag Cc: qemu-sta...@nongnu.org Signed-off-by: Michael Roth mdr...@linux.vnet.ibm.com I don't know if the QMP queue is the ideal queue for this patch, but I'd happily apply it if I get at least one Reviewed-by from the CC'ed people. Anthony actually added his Reviewed-by for v3, but I forgot to roll it in the commit. If you do take it in through your tree can you add that? Sorry for the bureaucracy, but I don't like to add other people's tags when the patch changes. Even when I'm sure they would be OK with the new version. Anthony, can you please add your Reviewed-by again? Thanks! --- v3-v4: * renamed 'suppress_be_open_on_init' to 'explicit_be_open' to match existing 'explicit_fe_open' flag (Hans) * added missing 'explicit_be_open' flags for spice vmc/port and msmouse backends v2-v3: * removed artifact in from v1 in backends/baum.c, test build with BRLAPI=y (Anthony) * rebased on latest origin/master v1-v2: * default to sending OPENED on backend init, add flag to suppress it (Anthony) * fix missing OPENED for stdio backends on w32 * fix missing OPENED when qemu_chr_new_from_opts() doesn't use qmp_chardev_add() * clean up/update commit message backends/baum.c |2 -- backends/msmouse.c|1 + include/sysemu/char.h |2 +- qemu-char.c | 38 +- spice-qemu-char.c |1 + ui/console.c |1 - ui/gtk.c |1 - 7 files changed, 20 insertions(+), 26 deletions(-) diff --git a/backends/baum.c b/backends/baum.c index 4cba79f..62aa784 100644 --- a/backends/baum.c +++ b/backends/baum.c @@ -611,8 +611,6 @@ CharDriverState *chr_baum_init(void) qemu_set_fd_handler(baum-brlapi_fd, baum_chr_read, NULL, baum); -qemu_chr_be_generic_open(chr); - return chr; fail: diff --git a/backends/msmouse.c b/backends/msmouse.c index 0ac05a0..c0dbfcd 100644 --- a/backends/msmouse.c +++ b/backends/msmouse.c @@ -70,6 +70,7 @@
Re: [Qemu-devel] [PATCH v4] qemu-char: don't issue CHR_EVENT_OPEN in a BH
On Fri, Jun 07, 2013 at 11:36:16AM -0400, Luiz Capitulino wrote: On Fri, 7 Jun 2013 09:56:00 -0500 mdroth mdr...@linux.vnet.ibm.com wrote: On Fri, Jun 07, 2013 at 09:50:39AM -0400, Luiz Capitulino wrote: On Tue, 4 Jun 2013 16:35:09 -0500 Michael Roth mdr...@linux.vnet.ibm.com wrote: When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET, and it was issued as a bottom-half: 86e94dea5b740dad65446c857f6959eae43e0ba6 Which we basically used to print out a greeting/prompt for the monitor. AFAICT the only reason this was ever done in a BH was because in some cases we'd modify the chr_write handler for a new chardev backend *after* the site where we issued the reset (see: 86e94d:qemu_chr_open_stdio()) At some point this event was renamed to CHR_EVENT_OPENED, and we've maintained the use of this BH ever since. However, due to 9f939df955a4152aad69a19a77e0898631bb2c18, we schedule the BH via g_idle_add(), which is causing events to sometimes be delivered after we've already begun processing data from backends, leading to: known bugs: QMP: session negotation resets with OPENED event, in some cases this is causing new sessions to get sporadically reset potential bugs: hw/usb/redirect.c: can_read handler checks for dev-parser != NULL, which may be true if CLOSED BH has not been executed yet. In the past, OPENED quiesced outstanding CLOSED events prior to us reading client data. If it's delayed, our check may allow reads to occur even though we haven't processed the OPENED event yet, and when we do finally get the OPENED event, our state may get reset. qtest.c: can begin session before OPENED event is processed, leading to a spurious reset of the system and irq_levels gdbstub.c: may start a gdb session prior to the machine being paused To fix these, let's just drop the BH. Since the initial reasoning for using it still applies to an extent, work around that by deferring the delivery of CHR_EVENT_OPENED until after the chardevs have been fully initialized, toward the end of qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This defers delivery long enough that we can be assured a CharDriverState is fully initialized before CHR_EVENT_OPENED is sent. Also, rather than requiring each chardev to do an explicit open, do it automatically, and allow the small few who don't desire such behavior to suppress the OPENED-on-init behavior by setting a 'explicit_be_open' flag. We additionally add missing OPENED events for stdio backends on w32, which were previously not being issued, causing us to not recieve the banner and initial prompts for qmp/hmp. Reported-by: Stefan Priebe s.pri...@profihost.ag Cc: qemu-sta...@nongnu.org Signed-off-by: Michael Roth mdr...@linux.vnet.ibm.com I don't know if the QMP queue is the ideal queue for this patch, but I'd happily apply it if I get at least one Reviewed-by from the CC'ed people. Anthony actually added his Reviewed-by for v3, but I forgot to roll it in the commit. If you do take it in through your tree can you add that? Sorry for the bureaucracy, but I don't like to add other people's tags when the patch changes. Even when I'm sure they would be OK with the new version. Good call, v5 incoming with gtk/sdl that fixes Anthony caught Anthony, can you please add your Reviewed-by again? Thanks! --- v3-v4: * renamed 'suppress_be_open_on_init' to 'explicit_be_open' to match existing 'explicit_fe_open' flag (Hans) * added missing 'explicit_be_open' flags for spice vmc/port and msmouse backends v2-v3: * removed artifact in from v1 in backends/baum.c, test build with BRLAPI=y (Anthony) * rebased on latest origin/master v1-v2: * default to sending OPENED on backend init, add flag to suppress it (Anthony) * fix missing OPENED for stdio backends on w32 * fix missing OPENED when qemu_chr_new_from_opts() doesn't use qmp_chardev_add() * clean up/update commit message backends/baum.c |2 -- backends/msmouse.c|1 + include/sysemu/char.h |2 +- qemu-char.c | 38 +- spice-qemu-char.c |1 + ui/console.c |1 - ui/gtk.c |1 - 7 files changed, 20 insertions(+), 26 deletions(-) diff --git a/backends/baum.c b/backends/baum.c index 4cba79f..62aa784 100644 --- a/backends/baum.c +++ b/backends/baum.c @@ -611,8 +611,6 @@ CharDriverState *chr_baum_init(void) qemu_set_fd_handler(baum-brlapi_fd, baum_chr_read, NULL, baum);
Re: [Qemu-devel] [PATCH v4] qemu-char: don't issue CHR_EVENT_OPEN in a BH
Luiz Capitulino lcapitul...@redhat.com writes: On Fri, 7 Jun 2013 09:56:00 -0500 mdroth mdr...@linux.vnet.ibm.com wrote: On Fri, Jun 07, 2013 at 09:50:39AM -0400, Luiz Capitulino wrote: On Tue, 4 Jun 2013 16:35:09 -0500 Michael Roth mdr...@linux.vnet.ibm.com wrote: When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET, and it was issued as a bottom-half: 86e94dea5b740dad65446c857f6959eae43e0ba6 Which we basically used to print out a greeting/prompt for the monitor. AFAICT the only reason this was ever done in a BH was because in some cases we'd modify the chr_write handler for a new chardev backend *after* the site where we issued the reset (see: 86e94d:qemu_chr_open_stdio()) At some point this event was renamed to CHR_EVENT_OPENED, and we've maintained the use of this BH ever since. However, due to 9f939df955a4152aad69a19a77e0898631bb2c18, we schedule the BH via g_idle_add(), which is causing events to sometimes be delivered after we've already begun processing data from backends, leading to: known bugs: QMP: session negotation resets with OPENED event, in some cases this is causing new sessions to get sporadically reset potential bugs: hw/usb/redirect.c: can_read handler checks for dev-parser != NULL, which may be true if CLOSED BH has not been executed yet. In the past, OPENED quiesced outstanding CLOSED events prior to us reading client data. If it's delayed, our check may allow reads to occur even though we haven't processed the OPENED event yet, and when we do finally get the OPENED event, our state may get reset. qtest.c: can begin session before OPENED event is processed, leading to a spurious reset of the system and irq_levels gdbstub.c: may start a gdb session prior to the machine being paused To fix these, let's just drop the BH. Since the initial reasoning for using it still applies to an extent, work around that by deferring the delivery of CHR_EVENT_OPENED until after the chardevs have been fully initialized, toward the end of qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This defers delivery long enough that we can be assured a CharDriverState is fully initialized before CHR_EVENT_OPENED is sent. Also, rather than requiring each chardev to do an explicit open, do it automatically, and allow the small few who don't desire such behavior to suppress the OPENED-on-init behavior by setting a 'explicit_be_open' flag. We additionally add missing OPENED events for stdio backends on w32, which were previously not being issued, causing us to not recieve the banner and initial prompts for qmp/hmp. Reported-by: Stefan Priebe s.pri...@profihost.ag Cc: qemu-sta...@nongnu.org Signed-off-by: Michael Roth mdr...@linux.vnet.ibm.com I don't know if the QMP queue is the ideal queue for this patch, but I'd happily apply it if I get at least one Reviewed-by from the CC'ed people. Anthony actually added his Reviewed-by for v3, but I forgot to roll it in the commit. If you do take it in through your tree can you add that? Sorry for the bureaucracy, but I don't like to add other people's tags when the patch changes. Even when I'm sure they would be OK with the new version. Anthony, can you please add your Reviewed-by again? I'll apply this patch directly since it's really a chardev patch more than a QMP patch. Regards, Anthony Liguori Thanks! --- v3-v4: * renamed 'suppress_be_open_on_init' to 'explicit_be_open' to match existing 'explicit_fe_open' flag (Hans) * added missing 'explicit_be_open' flags for spice vmc/port and msmouse backends v2-v3: * removed artifact in from v1 in backends/baum.c, test build with BRLAPI=y (Anthony) * rebased on latest origin/master v1-v2: * default to sending OPENED on backend init, add flag to suppress it (Anthony) * fix missing OPENED for stdio backends on w32 * fix missing OPENED when qemu_chr_new_from_opts() doesn't use qmp_chardev_add() * clean up/update commit message backends/baum.c |2 -- backends/msmouse.c|1 + include/sysemu/char.h |2 +- qemu-char.c | 38 +- spice-qemu-char.c |1 + ui/console.c |1 - ui/gtk.c |1 - 7 files changed, 20 insertions(+), 26 deletions(-) diff --git a/backends/baum.c b/backends/baum.c index 4cba79f..62aa784 100644 --- a/backends/baum.c +++ b/backends/baum.c @@ -611,8 +611,6 @@ CharDriverState *chr_baum_init(void) qemu_set_fd_handler(baum-brlapi_fd, baum_chr_read, NULL, baum); -qemu_chr_be_generic_open(chr); - return chr; fail: diff
Re: [Qemu-devel] [PATCH v4] qemu-char: don't issue CHR_EVENT_OPEN in a BH
On Fri, 07 Jun 2013 16:01:34 -0500 Anthony Liguori aligu...@us.ibm.com wrote: Luiz Capitulino lcapitul...@redhat.com writes: On Fri, 7 Jun 2013 09:56:00 -0500 mdroth mdr...@linux.vnet.ibm.com wrote: On Fri, Jun 07, 2013 at 09:50:39AM -0400, Luiz Capitulino wrote: On Tue, 4 Jun 2013 16:35:09 -0500 Michael Roth mdr...@linux.vnet.ibm.com wrote: When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET, and it was issued as a bottom-half: 86e94dea5b740dad65446c857f6959eae43e0ba6 Which we basically used to print out a greeting/prompt for the monitor. AFAICT the only reason this was ever done in a BH was because in some cases we'd modify the chr_write handler for a new chardev backend *after* the site where we issued the reset (see: 86e94d:qemu_chr_open_stdio()) At some point this event was renamed to CHR_EVENT_OPENED, and we've maintained the use of this BH ever since. However, due to 9f939df955a4152aad69a19a77e0898631bb2c18, we schedule the BH via g_idle_add(), which is causing events to sometimes be delivered after we've already begun processing data from backends, leading to: known bugs: QMP: session negotation resets with OPENED event, in some cases this is causing new sessions to get sporadically reset potential bugs: hw/usb/redirect.c: can_read handler checks for dev-parser != NULL, which may be true if CLOSED BH has not been executed yet. In the past, OPENED quiesced outstanding CLOSED events prior to us reading client data. If it's delayed, our check may allow reads to occur even though we haven't processed the OPENED event yet, and when we do finally get the OPENED event, our state may get reset. qtest.c: can begin session before OPENED event is processed, leading to a spurious reset of the system and irq_levels gdbstub.c: may start a gdb session prior to the machine being paused To fix these, let's just drop the BH. Since the initial reasoning for using it still applies to an extent, work around that by deferring the delivery of CHR_EVENT_OPENED until after the chardevs have been fully initialized, toward the end of qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This defers delivery long enough that we can be assured a CharDriverState is fully initialized before CHR_EVENT_OPENED is sent. Also, rather than requiring each chardev to do an explicit open, do it automatically, and allow the small few who don't desire such behavior to suppress the OPENED-on-init behavior by setting a 'explicit_be_open' flag. We additionally add missing OPENED events for stdio backends on w32, which were previously not being issued, causing us to not recieve the banner and initial prompts for qmp/hmp. Reported-by: Stefan Priebe s.pri...@profihost.ag Cc: qemu-sta...@nongnu.org Signed-off-by: Michael Roth mdr...@linux.vnet.ibm.com I don't know if the QMP queue is the ideal queue for this patch, but I'd happily apply it if I get at least one Reviewed-by from the CC'ed people. Anthony actually added his Reviewed-by for v3, but I forgot to roll it in the commit. If you do take it in through your tree can you add that? Sorry for the bureaucracy, but I don't like to add other people's tags when the patch changes. Even when I'm sure they would be OK with the new version. Anthony, can you please add your Reviewed-by again? I'll apply this patch directly since it's really a chardev patch more than a QMP patch. ACK
[Qemu-devel] [PATCH v4] qemu-char: don't issue CHR_EVENT_OPEN in a BH
When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET, and it was issued as a bottom-half: 86e94dea5b740dad65446c857f6959eae43e0ba6 Which we basically used to print out a greeting/prompt for the monitor. AFAICT the only reason this was ever done in a BH was because in some cases we'd modify the chr_write handler for a new chardev backend *after* the site where we issued the reset (see: 86e94d:qemu_chr_open_stdio()) At some point this event was renamed to CHR_EVENT_OPENED, and we've maintained the use of this BH ever since. However, due to 9f939df955a4152aad69a19a77e0898631bb2c18, we schedule the BH via g_idle_add(), which is causing events to sometimes be delivered after we've already begun processing data from backends, leading to: known bugs: QMP: session negotation resets with OPENED event, in some cases this is causing new sessions to get sporadically reset potential bugs: hw/usb/redirect.c: can_read handler checks for dev-parser != NULL, which may be true if CLOSED BH has not been executed yet. In the past, OPENED quiesced outstanding CLOSED events prior to us reading client data. If it's delayed, our check may allow reads to occur even though we haven't processed the OPENED event yet, and when we do finally get the OPENED event, our state may get reset. qtest.c: can begin session before OPENED event is processed, leading to a spurious reset of the system and irq_levels gdbstub.c: may start a gdb session prior to the machine being paused To fix these, let's just drop the BH. Since the initial reasoning for using it still applies to an extent, work around that by deferring the delivery of CHR_EVENT_OPENED until after the chardevs have been fully initialized, toward the end of qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This defers delivery long enough that we can be assured a CharDriverState is fully initialized before CHR_EVENT_OPENED is sent. Also, rather than requiring each chardev to do an explicit open, do it automatically, and allow the small few who don't desire such behavior to suppress the OPENED-on-init behavior by setting a 'explicit_be_open' flag. We additionally add missing OPENED events for stdio backends on w32, which were previously not being issued, causing us to not recieve the banner and initial prompts for qmp/hmp. Reported-by: Stefan Priebe s.pri...@profihost.ag Cc: qemu-sta...@nongnu.org Signed-off-by: Michael Roth mdr...@linux.vnet.ibm.com --- v3-v4: * renamed 'suppress_be_open_on_init' to 'explicit_be_open' to match existing 'explicit_fe_open' flag (Hans) * added missing 'explicit_be_open' flags for spice vmc/port and msmouse backends v2-v3: * removed artifact in from v1 in backends/baum.c, test build with BRLAPI=y (Anthony) * rebased on latest origin/master v1-v2: * default to sending OPENED on backend init, add flag to suppress it (Anthony) * fix missing OPENED for stdio backends on w32 * fix missing OPENED when qemu_chr_new_from_opts() doesn't use qmp_chardev_add() * clean up/update commit message backends/baum.c |2 -- backends/msmouse.c|1 + include/sysemu/char.h |2 +- qemu-char.c | 38 +- spice-qemu-char.c |1 + ui/console.c |1 - ui/gtk.c |1 - 7 files changed, 20 insertions(+), 26 deletions(-) diff --git a/backends/baum.c b/backends/baum.c index 4cba79f..62aa784 100644 --- a/backends/baum.c +++ b/backends/baum.c @@ -611,8 +611,6 @@ CharDriverState *chr_baum_init(void) qemu_set_fd_handler(baum-brlapi_fd, baum_chr_read, NULL, baum); -qemu_chr_be_generic_open(chr); - return chr; fail: diff --git a/backends/msmouse.c b/backends/msmouse.c index 0ac05a0..c0dbfcd 100644 --- a/backends/msmouse.c +++ b/backends/msmouse.c @@ -70,6 +70,7 @@ CharDriverState *qemu_chr_open_msmouse(void) chr = g_malloc0(sizeof(CharDriverState)); chr-chr_write = msmouse_chr_write; chr-chr_close = msmouse_chr_close; +chr-explicit_be_open = true; qemu_add_mouse_event_handler(msmouse_event, chr, 0, QEMU Microsoft Mouse); diff --git a/include/sysemu/char.h b/include/sysemu/char.h index 5e42c90..066c216 100644 --- a/include/sysemu/char.h +++ b/include/sysemu/char.h @@ -70,12 +70,12 @@ struct CharDriverState { void (*chr_set_echo)(struct CharDriverState *chr, bool echo); void (*chr_set_fe_open)(struct CharDriverState *chr, int fe_open); void *opaque; -int idle_tag; char *label; char *filename; int be_open; int fe_open; int explicit_fe_open; +int explicit_be_open; int avail_connections; QemuOpts *opts; QTAILQ_ENTRY(CharDriverState) next; diff --git a/qemu-char.c b/qemu-char.c index d04b429..0b6ae95 100644 --- a/qemu-char.c +++ b/qemu-char.c @@ -110,19 +110,9 @@ void qemu_chr_be_event(CharDriverState *s, int event) s-chr_event(s-handler_opaque, event); }