On Wed, Aug 19, 2020 at 1:09 AM Green Wan wrote:
>
> Add '-drive' support to OTP device. Allow users to assign a raw file
> as OTP image.
>
> Signed-off-by: Green Wan
> ---
> hw/riscv/sifive_u_otp.c | 50 +
> include/hw/riscv/sifive_u_otp.h | 2 ++
> 2 files changed, 52 insertions(+)
>
> diff --git a/hw/riscv/sifive_u_otp.c b/hw/riscv/sifive_u_otp.c
> index f6ecbaa2ca..4552b2409e 100644
> --- a/hw/riscv/sifive_u_otp.c
> +++ b/hw/riscv/sifive_u_otp.c
> @@ -24,6 +24,8 @@
> #include "qemu/log.h"
> #include "qemu/module.h"
> #include "hw/riscv/sifive_u_otp.h"
> +#include "sysemu/blockdev.h"
> +#include "sysemu/block-backend.h"
>
> static uint64_t sifive_u_otp_read(void *opaque, hwaddr addr, unsigned int
> size)
> {
> @@ -46,6 +48,16 @@ static uint64_t sifive_u_otp_read(void *opaque, hwaddr
> addr, unsigned int size)
> if ((s->pce & SIFIVE_U_OTP_PCE_EN) &&
> (s->pdstb & SIFIVE_U_OTP_PDSTB_EN) &&
> (s->ptrim & SIFIVE_U_OTP_PTRIM_EN)) {
> +
> +/* read from backend*/
nits: need a space before */
> +if (s->blk) {
> +int32_t buf;
> +
> +blk_pread(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD, ,
> + SIFIVE_U_OTP_FUSE_WORD);
> +return buf;
> +}
> +
> return s->fuse[s->pa & SIFIVE_U_OTP_PA_MASK];
> } else {
> return 0xff;
> @@ -123,6 +135,12 @@ static void sifive_u_otp_write(void *opaque, hwaddr addr,
> s->ptrim = val32;
> break;
> case SIFIVE_U_OTP_PWE:
> +/* write to backend */
> +if (s->blk) {
> +blk_pwrite(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD, ,
> + SIFIVE_U_OTP_FUSE_WORD, 0);
> +}
> +
> s->pwe = val32;
> break;
> default:
> @@ -143,16 +161,48 @@ static const MemoryRegionOps sifive_u_otp_ops = {
>
> static Property sifive_u_otp_properties[] = {
> DEFINE_PROP_UINT32("serial", SiFiveUOTPState, serial, 0),
> +DEFINE_PROP_DRIVE("drive", SiFiveUOTPState, blk),
> DEFINE_PROP_END_OF_LIST(),
> };
>
> static void sifive_u_otp_realize(DeviceState *dev, Error **errp)
> {
> SiFiveUOTPState *s = SIFIVE_U_OTP(dev);
> +DriveInfo *dinfo;
>
> memory_region_init_io(>mmio, OBJECT(dev), _u_otp_ops, s,
>TYPE_SIFIVE_U_OTP, SIFIVE_U_OTP_REG_SIZE);
> sysbus_init_mmio(SYS_BUS_DEVICE(dev), >mmio);
> +
> +dinfo = drive_get_next(IF_NONE);
> +if (dinfo) {
> +int ret;
> +uint64_t perm;
> +int filesize;
> +BlockBackend *blk;
nits: keep one space in between
> +
> +blk = blk_by_legacy_dinfo(dinfo);
> +filesize = SIFIVE_U_OTP_NUM_FUSES * SIFIVE_U_OTP_FUSE_WORD;
> +if (blk_getlength(blk) < filesize) {
> +qemu_log_mask(LOG_GUEST_ERROR, "OTP drive size < 16K\n");
> +return;
> +}
> +
> +qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo));
Use blk for blk_by_legacy_dinfo(dinfo)
> +
> +perm = BLK_PERM_CONSISTENT_READ |
> +(blk_is_read_only(s->blk) ? 0 : BLK_PERM_WRITE);
> +ret = blk_set_perm(s->blk, perm, BLK_PERM_ALL, errp);
> +if (ret < 0) {
> +qemu_log_mask(LOG_GUEST_ERROR, "set perm error.");
> +}
> +
> +if (blk_pread(s->blk, 0, s->fuse, filesize) != filesize) {
> +qemu_log_mask(LOG_GUEST_ERROR,
> + "failed to read the initial flash content");
> +return;
> +}
> +}
> }
>
> static void sifive_u_otp_reset(DeviceState *dev)
> diff --git a/include/hw/riscv/sifive_u_otp.h b/include/hw/riscv/sifive_u_otp.h
> index 639297564a..dea1df6f6c 100644
> --- a/include/hw/riscv/sifive_u_otp.h
> +++ b/include/hw/riscv/sifive_u_otp.h
> @@ -43,6 +43,7 @@
>
> #define SIFIVE_U_OTP_PA_MASK0xfff
> #define SIFIVE_U_OTP_NUM_FUSES 0x1000
> +#define SIFIVE_U_OTP_FUSE_WORD 4
> #define SIFIVE_U_OTP_SERIAL_ADDR0xfc
>
> #define SIFIVE_U_OTP_REG_SIZE 0x1000
> @@ -75,6 +76,7 @@ typedef struct SiFiveUOTPState {
> uint32_t fuse[SIFIVE_U_OTP_NUM_FUSES];
> /* config */
> uint32_t serial;
> +BlockBackend *blk;
nits: keep one space in between
> } SiFiveUOTPState;
>
> #endif /* HW_SIFIVE_U_OTP_H */
> --
Regards,
Bin
