Re: [QGIS-Developer] Custom CRS broken in master?

[Patrick Dunford]

I keep haviing issues with projects which lose the CRS settings between 
saves, that are being edited with 2.99 editions. However as the masters 
are built nightly and so there are new versions coming out all the time, 
it is difficult to keep track of which was the edition that was 
previously being used to work on the project.



On 09/10/17 00:26, Patrick Dunford wrote:


I just saw it with projects in some fairly recent builds of the 
master, opening project files saved in earlier master builds.



On 09/10/17 00:00, Anita Graser wrote:

Thanks Patrick!

On Sun, Oct 8, 2017 at 1:46 AM, Patrick Dunford 
> wrote:


There are some circumstances in which you have to re-enter your
CRS when opening a project in a development master, this is just
an issue with importing project files with some of the
development versions.

​So https://issues.qgis.org/issues/17257 is just a temporary issue?

Regards,
Antia​





___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer

Re: [QGIS-Developer] Custom CRS broken in master?

[Patrick Dunford]

I just saw it with projects in some fairly recent builds of the master, 
opening project files saved in earlier master builds.



On 09/10/17 00:00, Anita Graser wrote:

Thanks Patrick!

On Sun, Oct 8, 2017 at 1:46 AM, Patrick Dunford 
> wrote:


There are some circumstances in which you have to re-enter your
CRS when opening a project in a development master, this is just
an issue with importing project files with some of the development
versions.

​So https://issues.qgis.org/issues/17257 is just a temporary issue?

Regards,
Antia​



___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer

Re: [QGIS-Developer] Custom CRS broken in master?

[Anita Graser]

Thanks Patrick!

On Sun, Oct 8, 2017 at 1:46 AM, Patrick Dunford 
wrote:

> There are some circumstances in which you have to re-enter your CRS when
> opening a project in a development master, this is just an issue with
> importing project files with some of the development versions.
>
​So https://issues.qgis.org/issues/17257 is just a temporary issue?

Regards,
Antia​
___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer

Re: [QGIS-Developer] Custom CRS broken in master?

[Patrick Dunford]

There are some circumstances in which you have to re-enter your CRS when 
opening a project in a development master, this is just an issue with 
importing project files with some of the development versions.



On 08/10/17 01:07, Anita Graser wrote:

I've now tested this on another machine and the issues are same.

I open separate tickets or one with all three issues?

Regards,
Anita

On Fri, Oct 6, 2017 at 7:46 PM, Anita Graser > wrote:


Hi,

I'm experiencing a couple of issues related to custom / generated
CRS in master (tested using OSGeo4W):

1. In Processing: If the input layer uses a generated / custom
CRS, the output layer is loaded in a wrong CRS. In my case, the
layers were wrongly assigned WGS84. (Note that, in settings, I've
configured that QGIS should "prompt for CRS" if a layer without
CRS info is loaded.) --> Reported
https://issues.qgis.org/issues/17254


2. I have a project with a custom CRS used as the project CRS. It
was created with 2.14. When I open it in master, a different CRS
is assigned. Could be the one with the same random generated ID
that custom CRS get.

3. The Custom CRS Definition dialog is a mess. Most of the time, I
cannot make it save the new CRS I'm trying to add. At the same
time, existing entries are duplicated on opening & closing the dialog.

Anyone else having these issues? Or is my local install just
really broken?

Regards
Anita




___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer


___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer

Re: [QGIS-Developer] Custom CRS broken in master?

[Anita Graser]

Thanks Matthias,

On Sat, Oct 7, 2017 at 2:40 PM, Matthias Kuhn  wrote:
>
> Just reading through the tickets and without much context: they very much
> look like individual issues without any overlap, so I would go for
> different tickets.
> ​
>
> ​Here they are:

1. Wrong output CRS when input layer uses generated CRShttps://
issues.qgis.org/issues/17254

​2. ​
Cu
​​
stom project CRS is not restored correctly on project load
​ ​
https://issues.qgis.org/issues/17257

​3.​Custom CRS Definition dialog is unusable
https://issues.qgis.org/issues/17258

Anita
___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer

Re: [QGIS-Developer] Custom CRS broken in master?

[Matthias Kuhn]

Hi Anita,

Just reading through the tickets and without much context: they very 
much look like individual issues without any overlap, so I would go for 
different tickets.


Thanks

Matthias


On 10/07/2017 02:07 PM, Anita Graser wrote:

I've now tested this on another machine and the issues are same.

I open separate tickets or one with all three issues?

Regards,
Anita

On Fri, Oct 6, 2017 at 7:46 PM, Anita Graser > wrote:


Hi,

I'm experiencing a couple of issues related to custom / generated
CRS in master (tested using OSGeo4W):

1. In Processing: If the input layer uses a generated / custom
CRS, the output layer is loaded in a wrong CRS. In my case, the
layers were wrongly assigned WGS84. (Note that, in settings, I've
configured that QGIS should "prompt for CRS" if a layer without
CRS info is loaded.) --> Reported
https://issues.qgis.org/issues/17254


2. I have a project with a custom CRS used as the project CRS. It
was created with 2.14. When I open it in master, a different CRS
is assigned. Could be the one with the same random generated ID
that custom CRS get.

3. The Custom CRS Definition dialog is a mess. Most of the time, I
cannot make it save the new CRS I'm trying to add. At the same
time, existing entries are duplicated on opening & closing the dialog.

Anyone else having these issues? Or is my local install just
really broken?

Regards
Anita




___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer


___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer

Re: [QGIS-Developer] Custom CRS broken in master?

[Anita Graser]

I've now tested this on another machine and the issues are same.

I open separate tickets or one with all three issues?

Regards,
Anita

On Fri, Oct 6, 2017 at 7:46 PM, Anita Graser  wrote:

> Hi,
>
> I'm experiencing a couple of issues related to custom / generated CRS in
> master (tested using OSGeo4W):
>
> 1. In Processing: If the input layer uses a generated / custom CRS, the
> output layer is loaded in a wrong CRS. In my case, the layers were wrongly
> assigned WGS84. (Note that, in settings, I've configured that QGIS should
> "prompt for CRS" if a layer without CRS info is loaded.) --> Reported
> https://issues.qgis.org/issues/17254
>
> 2. I have a project with a custom CRS used as the project CRS. It was
> created with 2.14. When I open it in master, a different CRS is assigned.
> Could be the one with the same random generated ID that custom CRS get.
>
> 3. The Custom CRS Definition dialog is a mess. Most of the time, I cannot
> make it save the new CRS I'm trying to add. At the same time, existing
> entries are duplicated on opening & closing the dialog.
>
> Anyone else having these issues? Or is my local install just really broken?
>
> Regards
> Anita
>
___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer

[QGIS-Developer] Custom CRS broken in master?

[Anita Graser]

Hi,

I'm experiencing a couple of issues related to custom / generated CRS in
master (tested using OSGeo4W):

1. In Processing: If the input layer uses a generated / custom CRS, the
output layer is loaded in a wrong CRS. In my case, the layers were wrongly
assigned WGS84. (Note that, in settings, I've configured that QGIS should
"prompt for CRS" if a layer without CRS info is loaded.) --> Reported
https://issues.qgis.org/issues/17254

2. I have a project with a custom CRS used as the project CRS. It was
created with 2.14. When I open it in master, a different CRS is assigned.
Could be the one with the same random generated ID that custom CRS get.

3. The Custom CRS Definition dialog is a mess. Most of the time, I cannot
make it save the new CRS I'm trying to add. At the same time, existing
entries are duplicated on opening & closing the dialog.

Anyone else having these issues? Or is my local install just really broken?

Regards
Anita
___
QGIS-Developer mailing list
QGIS-Developer@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-developer
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-developer