[Qgis-user] Ordinary Kriging (QGIS v 3.0.3)

[PARESH CHAUKHANDE]

I am doing ordinary kriging in QGIS 3(Girona) for multiplication data (lonlat) 
of India. After running the algorithms, two options are generated:  Prediction 
and Quality Measure by default. After these when I came to Symbology  option, 
by default Singleband Gray is alive. When I change the option such as Multiband 
Color, ,Singleband Pseudocolor etc. then the Prediction and Quality Measure 
values are getting disappear.
I want to generate maps by performing ordinary kriging in qgis. Any help..!!!
Step by step guidance will be highly appreciable.

Sincerely yours,

PARESH CHAUKHANDE.
Scientist,ICAR,INDIA.
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Unable to load project

[Springfield Harrison]

Ok, thanks Nicolas, appreciate all the advice . . .

Cheers . . . . . Spring .


On 13-Jun-2018 03:46, Nicolas Cadieux wrote:

Hi,
Simply because the express desktop will usually install most of what I 
need.   As I also need special packages and libraries for programming 
in python, I usually add those after.  I just got used to do it like 
and as I often do the install on multiple computers, I find it a 
little bit faster.

Nicolas

Le 13 juin 2018 à 02:21, Springfield Harrison > a écrit :



Hello Nicolas,

Thanks for those instructions, likely will save me considerable 
time.  Your instructions seem quite straightforward but just curious 
why you would not skip the express desktop install and go straight to 
the advanced install directly?


Thanks again…

Cheers . . . . . Spring .



On 12-Jun-2018 08:25, Nicolas Cadieux wrote:


Sorry,

Attached images were too big.  Resending without the screen shots.

Nicolas


On 2018-06-11 7:16 PM, Nicolas Cadieux wrote:


Hi,

As usual, answer below.

Nicolas


On 2018-06-11 1:10 PM, Springfield Harrison wrote:

Greetings again,

Thanks for the comments again.

 1. Regarding the versions, things are not actually as I imagine. 
My assumption that higher numbers indicate a newer version

appears to be incorrect. I presume this is documented
somewhere and will try to sort through all that when I get
time. This is a good example of why I am reluctant to wade
into the upgrade end of the pool.  Workload well out of
proportion to the presumed benefits.


The Osgeo4w installer makes this easy for you.


 1. Where is the logic here - "so actually it would not be a "step
backwards" to go from 2.8  to 2.18."?  Sorry to be difficult
but why does QGIS versioning need to be studied, when it could
easily be intuitive?

They are not numbers.  Logic is found here: 
https://qgis.org/en/site/getinvolved/development/roadmap.html


1.


 2. Will osgeo4w install an LTR?

I believe the express install will only install the latest stable 
3.x version (select Express Desktop Install.  The Express Web-GIS 
install option is for a web server).  The Advance Osgeo will add 
options.

a) Select "Advanced Install"
b) Select  "Install from the Internet"
c) Select the Root Directory (C:\OSGeo4W64 is suggested. I would 
not change it.  If you do, make sure you have no space " "or funny 
character like in "c:\José Qgis installation").  This is where the 
program file will be placed.
d) Select Install for "All Users" and "Create icon on Desktop" and 
"Start Menu".
e) Local Package Directory will be offered. 
"C:\Users\Admin\AppData\Local\Temp" .  Don't need to change it.  
That is where the installation files will be downloaded.

f) Select the Internet Connection. Default is "Direct Connection".
g)Choose a Download site.  Default is http:/download.osgeo.org.
h) Look at the final screen shot I sent you.  I you select 
"desktop", you will see current version  number (if installed) and 
the new version number.  Select "qgis: QGIS Desktop" for 3x or 
"qgis: qgis-ltr-full." for 2.x.  Or both.  Other packages will be 
selected for you (like Saga, Grass.) Do not deselect them.  You 
will also need to accept all licences  during the install and you 
will probably be asked to add extra packages along the way. Accept 
them.


For me, the normal procedure on a new computer is to start with an 
Express Desktop Install.  Then, I do an "advance Install" to add 
extra packages or different versions of QGIS.


Nicolas



 
	Virus-free. www.avg.com 
 



<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] "Pick color" freeze win10?

[Nyall Dawson]

On Tue, 12 Jun 2018 at 23:37, Elstermann, Mike
 wrote:
>
> QGIS 2.14 / 2.18(.20) under Windows 10:
> Windows freezes when the "Pick color" function is used. Only way out 
>  and "Abort". Ideas?

I see the same on Windows 7, but only with 2.18.

I've (fortunately) never experienced this with 3.0.

Nyall
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] "Pick color" freeze win10?

[Phil Wyatt]

Hi MikeE,

If you have only recently installed 2.18.20 I would also consider a reinstall 
in case there was some issue with the original download.

If I remember correctly there may have also been issues on Mac computers some 
time ago.

Cheers - Phil

-Original Message-
From: Elstermann, Mike [mailto:mike.elsterm...@itc-halle.de] 
Sent: Thursday, 14 June 2018 3:55 AM
To: Phil Wyatt
Cc: qgis-user@lists. osgeo. org
Subject: Re: [Qgis-user] "Pick color" freeze win10?

OK, it works :-)
THX, mikeE.

> Am 13.06.2018 um 12:24 schrieb Phil Wyatt :
> 
> If you click on the fill colour (rather than use the drop down box) is the 
> colour picker tab there and does that work?
>  
> 
>  

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Dynamic Pie Shape Style

[C Hamilton]

I had a request from a user of "Shape Tools" to make the pie shapes dynamic
in the sense that as you zoom in and out they would visibly resize to be
remain seen. Since "Shape Tools" creates the pie polygons that is not
possible.

I was wondering if it is possible to add some type of shape style that
would render a pie shape from a point layer with the options of specifying
starting and stopping angles and its relative size.

I don't know if this is possible so I thought I would solicit some ideas to
see if it worth pursuing.

Thanks,

Calvin Hamilton
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Add new layer to existing GeoPackage file

[Árni Geirsson]

I did not know that it was possible to drag the layer into the browser -
that's very handy. But another way is to connect to the geopackage using DB
Manager and then upload any additional layers.

Arni

Árni Geirsson
*Alta ehf* // +354 582 5000 // +354 897 9549


On Wed, 13 Jun 2018 at 17:37, Michael Treglia  wrote:

> Hi Rick,
>
> Here's what I've done albeit this isn't as smooth as directly doing "save
> as" to the gpkg file...:
> Save the file as another file type (or another gpkg file);
> You can then drag layers from the Layers panel to the .gpkg file in the
> Browser panel.
>
> I hope that helps!
> Mike
>
> On Wed, Jun 13, 2018 at 1:25 PM, Rick Rupp  wrote:
>
>> Hi,
>>
>> I want to use the “Save as” function on a GeoPackage layer to save a
>> reprojected copy to a new layer in the same GeoPackage file. The function
>> fails with an “Error: Cannot overwrite an OGR layer in place” message. The
>> same thing happens if I try to save a subset of selected features from a
>> layer to the same GeoPackage file. However, if I use the ogr2ogr function
>> it works nicely. Is this the expected behavior? I am updating lab exercises
>> for students in my beginning GIS class, and trying to switch from
>> shapefiles to GeoPackage, so I am reluctant to send students to the command
>> line early in their GIS training. I am working with QGIS 3.0.3 on Windows
>> 10.
>> Regards, Richard
>>
>> ___
>> Qgis-user mailing list
>> Qgis-user@lists.osgeo.org
>> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
>> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>>
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] "Pick color" freeze win10?

[Elstermann, Mike]

OK, it works :-)
THX, mikeE.

> Am 13.06.2018 um 12:24 schrieb Phil Wyatt :
> 
> If you click on the fill colour (rather than use the drop down box) is the 
> colour picker tab there and does that work?
>  
> 
>  
> From: Elstermann, Mike [mailto:mike.elsterm...@itc-halle.de] 
> Sent: Wednesday, 13 June 2018 8:06 PM
> To: 'Phil Wyatt'; qgis-user@lists.osgeo.org
> Subject: AW: [Qgis-user] "Pick color" freeze win10?
>  
> See this little video, after the last click ("Pick Color") QGIS/Win10 
> freezes. No pipette :-(
>  
> http://www.geoobserver.de/QGIS_Freeze.mp4
>  
> THX, mikeE.
>  
> Von: Phil Wyatt  
> Gesendet: Mittwoch, 13. Juni 2018 08:09
> An: Elstermann, Mike ; qgis-user@lists.osgeo.org
> Betreff: RE: [Qgis-user] "Pick color" freeze win10?
>  
> Seems to be working OK for me on Win10 Pro. 2.18.20
>  
> Where exactly are you using the colour picker when it freezes? (layer, style, 
> single style, categorised, rule based…??). What sort of data layer?
>  
> Cheers - Phil
>  
> From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of 
> Elstermann, Mike
> Sent: Tuesday, 12 June 2018 11:37 PM
> To: 'qgis-user@lists.osgeo.org' (qgis-user@lists.osgeo.org)
> Subject: [Qgis-user] "Pick color" freeze win10?
>  
> QGIS 2.14 / 2.18(.20) under Windows 10:
> Windows freezes when the "Pick color" function is used. Only way out 
>  and "Abort". Ideas?
>  
> THX, mikeE.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Add new layer to existing GeoPackage file

[Michael Treglia]

Hi Rick,

Here's what I've done albeit this isn't as smooth as directly doing "save
as" to the gpkg file...:
Save the file as another file type (or another gpkg file);
You can then drag layers from the Layers panel to the .gpkg file in the
Browser panel.

I hope that helps!
Mike

On Wed, Jun 13, 2018 at 1:25 PM, Rick Rupp  wrote:

> Hi,
>
> I want to use the “Save as” function on a GeoPackage layer to save a
> reprojected copy to a new layer in the same GeoPackage file. The function
> fails with an “Error: Cannot overwrite an OGR layer in place” message. The
> same thing happens if I try to save a subset of selected features from a
> layer to the same GeoPackage file. However, if I use the ogr2ogr function
> it works nicely. Is this the expected behavior? I am updating lab exercises
> for students in my beginning GIS class, and trying to switch from
> shapefiles to GeoPackage, so I am reluctant to send students to the command
> line early in their GIS training. I am working with QGIS 3.0.3 on Windows
> 10.
> Regards, Richard
>
> ___
> Qgis-user mailing list
> Qgis-user@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user
>
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[Qgis-user] Add new layer to existing GeoPackage file

[Rick Rupp]

Hi,

I want to use the “Save as” function on a GeoPackage layer to save a 
reprojected copy to a new layer in the same GeoPackage file. The function fails 
with an “Error: Cannot overwrite an OGR layer in place” message. The same thing 
happens if I try to save a subset of selected features from a layer to the same 
GeoPackage file. However, if I use the ogr2ogr function it works nicely. Is 
this the expected behavior? I am updating lab exercises for students in my 
beginning GIS class, and trying to switch from shapefiles to GeoPackage, so I 
am reluctant to send students to the command line early in their GIS training. 
I am working with QGIS 3.0.3 on Windows 10.

Regards, Richard
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [QGIS-it-user] OpenCycleMap API KEY REQUIRED

[Totò]

Daniele Bonaposta wrote
> Ciao Totò,
> intendi un file tipo il .ini contenuto nel plugin di QuickMapServices?
> Dove lo devo salvare? Formato .xyz?

Scusa, mi sono spiegato male.

Nel browser panel trovi tileXYZ, 
creane uno nuovo e metti cone url quello con la apikey

https://www.youtube.com/watch?v=8HhGwfA7M50=4s



-
https://pigrecoinfinito.wordpress.com/
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [QGIS-it-user] OpenCycleMap API KEY REQUIRED

[Totò]

-
https://pigrecoinfinito.wordpress.com/
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [QGIS-it-user] OpenCycleMap API KEY REQUIRED

[Daniele Bonaposta]

Ciao Totò,
intendi un file tipo il .ini contenuto nel plugin di QuickMapServices?
Dove lo devo salvare? Formato .xyz?

Daniele

Il giorno 13 giugno 2018 17:01, Totò  ha scritto:

> Daniele Bonaposta wrote
> > Ciao a tutti,
> > sto creando delle mappe da stampare ed utilizzo come sfondo il rendering
> > opencyclemap.
> >
> > *OpenLyers plugin > OSM/Thunderforest > OpenCycleMap *
> > ottengo le mappe in una tonalità ciano bella accesa!!! ...e quindi
> > inutilizzabile.
> > Ho un account Thunderforest ed ho impostato API KEY.
> >
> > *QuickMapServices > OSM > OSM Cycle Map*
> > ottengo le mappe con la scritta obliqua "API KEY REQUIRED" su ogni tile
> > ..inutilizzabili anche queste.
> >
> > Vorrei utilizzare QuickMapServices per evitare il problema della
> dominante
> > di colore, ma senza avere le scritte "API KEY REQUIRED" ..devo settare
> > qualcos'altro?
> >
> > Linux Mint 17.3
> > QGIS 2.18.20
>
> Dopo aver ottenuto l API KEY:
> creare un tile xyz:
>
> https://a.tile.thunderforest.com/cycle/{z}/{x}/{y}.png?apikey=apikey
>
> a me funziona.
>
>
>
> -
> https://pigrecoinfinito.wordpress.com/
> --
> Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-
> f5250612.html
> ___
> QGIS-it-user mailing list
> QGIS-it-user@lists.osgeo.org
> https://lists.osgeo.org/mailman/listinfo/qgis-it-user
>



-- 
_

Daniele Bonaposta,
Cartografia - G.I.S.

via Don Minzoni 13a
40121 - Bologna
mobile: +39.338.3377044
e-mail: daniele.bonapo...@gmail.com

*Linked*in: http://www.linkedin.com/pub/daniele-bonaposta/26/487/872

_
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [QGIS-it-user] GeoPackage e salvataggi di nuovi layer

[Ludovico]

Ok, è la gestione non DB (termine poco appropriato) di QGIS che crea questo
"problema". Dal DB Manager, invece si riesce tra tranquillante a duplicare
le tabelle.

Grazie



-
Dott. For. Ludovico Frate, PhD

--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [QGIS-it-user] GeoPackage e salvataggi di nuovi layer

[Ludovico]

Ok, è la gestione non DB (termine poco appropriato) di QGIS che crea questo
"problema". Dal DB Manager, invece si riesce tra tranquillante a duplicare
le tabelle.

Grazie



-
Dott. For. Ludovico Frate, PhD

--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [QGIS-it-user] OpenCycleMap API KEY REQUIRED

[Carlo Tersigni]

Io ho lo stesso problema: ho avuto una key da Thunderforest, ma la scritta
"AOI KEY REQUIRED" non scompare.
QGis 2.18.19

Saluti
carlo

Il giorno 13 giugno 2018 11:19, Daniele Bonaposta <
daniele.bonapo...@gmail.com> ha scritto:

> Ciao a tutti,
> sto creando delle mappe da stampare ed utilizzo come sfondo il rendering
> opencyclemap.
>
> *OpenLyers plugin > OSM/Thunderforest > OpenCycleMap *
> ottengo le mappe in una tonalità ciano bella accesa!!! ...e quindi
> inutilizzabile.
> Ho un account Thunderforest ed ho impostato API KEY.
>
> *QuickMapServices > OSM > OSM Cycle Map*
> ottengo le mappe con la scritta obliqua "API KEY REQUIRED" su ogni tile
> ..inutilizzabili anche queste.
>
> Vorrei utilizzare QuickMapServices per evitare il problema della dominante
> di colore, ma senza avere le scritte "API KEY REQUIRED" ..devo settare
> qualcos'altro?
>
> Linux Mint 17.3
> QGIS 2.18.20
>
> Saluti,
> Daniele
>
>
>
>
> ___
> QGIS-it-user mailing list
> QGIS-it-user@lists.osgeo.org
> https://lists.osgeo.org/mailman/listinfo/qgis-it-user
>
>


-- 
*Carlo TERSIGNI*
*Via Padre Semeria, 6300154 - ROMA*

*tel.: 333-4653589e-mail: carter@gmail.com *
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [QGIS-it-user] GeoPackage e salvataggi di nuovi layer

[Totò]

Ludovico wrote
> Ciao a tutti, quando provo a salvare una copia di un layer oppure a
> salvare
> un nuovo layer derivante da una selezione di un layer esistente in un
> GeoPackage ricevo sempre lo stesso errore (cambiando naturalmente il
> nome):
> 
> Esportazione nel file vettoriale fallita.
> Errore: Impossibile sovrascrivere un layer OGR nella stessa posizione
> 
> Qualcuno ha risolto?
> Grazie

Secondo me è un comportamento previsto e quindi è normale che qgis avverta
del problema.
Duplicare o salvare solo una parte di un geopackage, anche cambiando il
nome, non modifica realmente il layer in quanto la modifica è a livello di
progetto e non di dato vero e proprio.

ecco un ticket aperto tempo fa:
https://issues.qgis.org/issues/16588



-
https://pigrecoinfinito.wordpress.com/
--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

[Qgis-user] Rule based styles using SVG markers

[Patrick Dunford]

Good day to all.

I have noted in my projects repeated issues relating to the use of SVG 
symbols as part of specific line-based styles. Currently some of my 
line-based styles have an SVG symbol overlaid on top of a particular line.


When these styles are stored into the style manager and exported from 
there to a styles file there seems to be little difficulty for the 
software in being able to reload the SVG symbols from the file when 
software is installed for the first time.


However the use of rule based styles where the styles are stored in some 
different system that invokes them according to whatever is specified 
for a particular layer seems to be a different and more complicated 
process. In the majority of cases when the rules were set up for each 
layer, the styles for them were selected directly from the ones already 
defined in the styles manager, and seemed to work satisfactorily in that 
the SVG symbols appeared as expected.


However it seems that every time the software is installed for the first 
time on a newly installed computer, the rule based styling is unable to 
locate the SVG symbols that are needed for these styles even although 
the style manager for the software has no difficulty in finding and 
displaying them.


There is a GUI option in the System tab for setting paths for searching 
for SVG symbols. So far I have not experienced that specifying paths in 
this area causes the missing SVG symbols to reappear when a project is 
opened.


I think it would be of considerable assistance at this point to have an 
understanding of how the SVG symbols are looked up and stored in 
rule-based styles. Although there is a lack of clarity about where the 
styles information in the Styles Manager is read in from when the 
software starts up, this part of the software appears to have little 
difficulty in looking up SVG symbols and displaying them, compared to 
what is happening with per-layer rule-based styling.


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[QGIS-it-user] GeoPackage e salvataggi di nuovi layer

[Ludovico]

Ciao a tutti, quando provo a salvare una copia di un layer oppure a salvare
un nuovo layer derivante da una selezione di un layer esistente in un
GeoPackage ricevo sempre lo stesso errore (cambiando naturalmente il nome):

Esportazione nel file vettoriale fallita.
Errore: Impossibile sovrascrivere un layer OGR nella stessa posizione

Qualcuno ha risolto?
Grazie




-
Dott. For. Ludovico Frate, PhD

--
Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-Italian-User-f5250612.html
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] Unable to load project

[Nicolas Cadieux]

Hi,
Simply because the express desktop will usually install most of what I need.   
As I also need special packages and libraries for programming in python, I 
usually add those after.  I just got used to do it like and as I often do the 
install on multiple computers, I find it a little bit faster.
Nicolas

> Le 13 juin 2018 à 02:21, Springfield Harrison  a écrit :
> 
> Hello Nicolas,
> 
> Thanks for those instructions, likely will save me considerable time.  Your 
> instructions seem quite straightforward but just curious why you would not 
> skip the express desktop install and go straight to the advanced install 
> directly?
> 
> Thanks again…
> 
> Cheers . . . . . Spring .
> 
> 
> 
>> On 12-Jun-2018 08:25, Nicolas Cadieux wrote:
>> Sorry, 
>> Attached images were too big.  Resending without the screen shots.
>> 
>> Nicolas
>> 
>>> On 2018-06-11 7:16 PM, Nicolas Cadieux wrote:
>>> Hi,
>>> 
>>> As usual, answer below.
>>> 
>>> Nicolas
>>> 
 On 2018-06-11 1:10 PM, Springfield Harrison wrote:
 Greetings again,
 
 Thanks for the comments again.
 Regarding the versions, things are not actually as I imagine.  My 
 assumption that higher numbers indicate a newer version appears to be 
 incorrect.  I presume this is documented somewhere and will try to sort 
 through all that when I get time.  This is a good example of why I am 
 reluctant to wade into the upgrade end of the pool.  Workload well out of 
 proportion to the presumed benefits.
>>> The Osgeo4w installer makes this easy for you.
 Where is the logic here - "so actually it would not be a "step backwards" 
 to go from 2.8  to 2.18."?  Sorry to be difficult but why does QGIS 
 versioning need to be studied, when it could easily be intuitive?  
>>> They are not numbers.  Logic is found here: 
>>> https://qgis.org/en/site/getinvolved/development/roadmap.html
 
 Will osgeo4w install an LTR?
>>> I believe the express install will only install the latest stable 3.x 
>>> version (select Express Desktop Install.  The Express Web-GIS install 
>>> option is for a web server).  The Advance Osgeo will add options.
>>> a) Select "Advanced Install"
>>> b) Select  "Install from the Internet"
>>> c) Select the Root Directory (C:\OSGeo4W64 is suggested.  I would not 
>>> change it.  If you do, make sure you have no space " "or funny character 
>>> like in "c:\José Qgis installation").  This is where the program file will 
>>> be placed.
>>> d) Select Install for "All Users" and "Create icon on Desktop" and "Start 
>>> Menu".
>>> e) Local Package Directory will be offered.   
>>> "C:\Users\Admin\AppData\Local\Temp" .  Don't need to change it.  That is 
>>> where the installation files will be downloaded.
>>> f) Select the Internet Connection. Default is "Direct Connection".
>>> g)Choose a Download site.  Default is http:/download.osgeo.org.
>>> h) Look at the final screen shot I sent you.  I you select "desktop", you 
>>> will see current version  number (if installed) and the new version number. 
>>>  Select "qgis: QGIS Desktop" for 3x or "qgis: qgis-ltr-full." for 2.x.  Or 
>>> both.  Other packages will be selected for you (like Saga, Grass.) Do not 
>>> deselect them.  You will also need to accept all licences  during the 
>>> install and you will probably be asked to add extra packages along the way. 
>>> Accept them. 
>>> 
>>> For me, the normal procedure on a new computer is to start with an Express 
>>> Desktop Install.  Then, I do an "advance Install" to add extra packages or 
>>> different versions of QGIS.
>>> 
>>> Nicolas
>>>   
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] "Pick color" freeze win10?

[Phil Wyatt]

If you click on the fill colour (rather than use the drop down box) is the
colour picker tab there and does that work?

 



 

From: Elstermann, Mike [mailto:mike.elsterm...@itc-halle.de] 
Sent: Wednesday, 13 June 2018 8:06 PM
To: 'Phil Wyatt'; qgis-user@lists.osgeo.org
Subject: AW: [Qgis-user] "Pick color" freeze win10?

 

See this little video, after the last click ("Pick Color") QGIS/Win10
freezes. No pipette :-(

 

http://www.geoobserver.de/QGIS_Freeze.mp4

 

THX, mikeE.

 

Von: Phil Wyatt  
Gesendet: Mittwoch, 13. Juni 2018 08:09
An: Elstermann, Mike ;
qgis-user@lists.osgeo.org
Betreff: RE: [Qgis-user] "Pick color" freeze win10?

 

Seems to be working OK for me on Win10 Pro. 2.18.20

 

Where exactly are you using the colour picker when it freezes? (layer,
style, single style, categorised, rule based.??). What sort of data layer?

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of
Elstermann, Mike
Sent: Tuesday, 12 June 2018 11:37 PM
To: 'qgis-user@lists.osgeo.org' (qgis-user@lists.osgeo.org)
Subject: [Qgis-user] "Pick color" freeze win10?

 

QGIS 2.14 / 2.18(.20) under Windows 10:
Windows freezes when the "Pick color" function is used. Only way out
 and "Abort". Ideas?

 

THX, mikeE.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] "Pick color" freeze win10?

[Elstermann, Mike]

See this little video, after the last click ("Pick Color") QGIS/Win10 freezes. 
No pipette :-(

http://www.geoobserver.de/QGIS_Freeze.mp4

THX, mikeE.

Von: Phil Wyatt 
Gesendet: Mittwoch, 13. Juni 2018 08:09
An: Elstermann, Mike ; qgis-user@lists.osgeo.org
Betreff: RE: [Qgis-user] "Pick color" freeze win10?

Seems to be working OK for me on Win10 Pro. 2.18.20

Where exactly are you using the colour picker when it freezes? (layer, style, 
single style, categorised, rule based...??). What sort of data layer?

Cheers - Phil

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of 
Elstermann, Mike
Sent: Tuesday, 12 June 2018 11:37 PM
To: 'qgis-user@lists.osgeo.org' 
(qgis-user@lists.osgeo.org)
Subject: [Qgis-user] "Pick color" freeze win10?

QGIS 2.14 / 2.18(.20) under Windows 10:
Windows freezes when the "Pick color" function is used. Only way out 
 and "Abort". Ideas?

THX, mikeE.
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

[QGIS-it-user] OpenCycleMap API KEY REQUIRED

[Daniele Bonaposta]

Ciao a tutti,
sto creando delle mappe da stampare ed utilizzo come sfondo il rendering
opencyclemap.

*OpenLyers plugin > OSM/Thunderforest > OpenCycleMap *
ottengo le mappe in una tonalità ciano bella accesa!!! ...e quindi
inutilizzabile.
Ho un account Thunderforest ed ho impostato API KEY.

*QuickMapServices > OSM > OSM Cycle Map*
ottengo le mappe con la scritta obliqua "API KEY REQUIRED" su ogni tile
..inutilizzabili anche queste.

Vorrei utilizzare QuickMapServices per evitare il problema della dominante
di colore, ma senza avere le scritte "API KEY REQUIRED" ..devo settare
qualcos'altro?

Linux Mint 17.3
QGIS 2.18.20

Saluti,
Daniele
___
QGIS-it-user mailing list
QGIS-it-user@lists.osgeo.org
https://lists.osgeo.org/mailman/listinfo/qgis-it-user

Re: [Qgis-user] "Pick color" freeze win10?

[Phil Wyatt]

Seems to be working OK for me on Win10 Pro. 2.18.20

 

Where exactly are you using the colour picker when it freezes? (layer,
style, single style, categorised, rule based.??). What sort of data layer?

 

Cheers - Phil

 

From: Qgis-user [mailto:qgis-user-boun...@lists.osgeo.org] On Behalf Of
Elstermann, Mike
Sent: Tuesday, 12 June 2018 11:37 PM
To: 'qgis-user@lists.osgeo.org' (qgis-user@lists.osgeo.org)
Subject: [Qgis-user] "Pick color" freeze win10?

 

QGIS 2.14 / 2.18(.20) under Windows 10:
Windows freezes when the "Pick color" function is used. Only way out
 and "Abort". Ideas?

 

THX, mikeE.

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Unable to load project

[Springfield Harrison]

Hello Nicolas,

Thanks for those instructions, likely will save me considerable time.  
Your instructions seem quite straightforward but just curious why you 
would not skip the express desktop install and go straight to the 
advanced install directly?


Thanks again…

Cheers . . . . . Spring .



On 12-Jun-2018 08:25, Nicolas Cadieux wrote:


Sorry,

Attached images were too big.  Resending without the screen shots.

Nicolas


On 2018-06-11 7:16 PM, Nicolas Cadieux wrote:


Hi,

As usual, answer below.

Nicolas


On 2018-06-11 1:10 PM, Springfield Harrison wrote:

Greetings again,

Thanks for the comments again.

 1. Regarding the versions, things are not actually as I imagine. 
My assumption that higher numbers indicate a newer version

appears to be incorrect.  I presume this is documented somewhere
and will try to sort through all that when I get time.  This is
a good example of why I am reluctant to wade into the upgrade
end of the pool. Workload well out of proportion to the presumed
benefits.


The Osgeo4w installer makes this easy for you.


 1. Where is the logic here - "so actually it would not be a "step
backwards" to go from 2.8  to 2.18."?  Sorry to be difficult but
why does QGIS versioning need to be studied, when it could
easily be intuitive?

They are not numbers.  Logic is found here: 
https://qgis.org/en/site/getinvolved/development/roadmap.html


1.


 2. Will osgeo4w install an LTR?

I believe the express install will only install the latest stable 3.x 
version (select Express Desktop Install.  The Express Web-GIS install 
option is for a web server).  The Advance Osgeo will add options.

a) Select "Advanced Install"
b) Select  "Install from the Internet"
c) Select the Root Directory (C:\OSGeo4W64 is suggested.  I would not 
change it.  If you do, make sure you have no space " "or funny 
character like in "c:\José Qgis installation").  This is where the 
program file will be placed.
d) Select Install for "All Users" and "Create icon on Desktop" and 
"Start Menu".
e) Local Package Directory will be offered. 
"C:\Users\Admin\AppData\Local\Temp" .  Don't need to change it. That 
is where the installation files will be downloaded.

f) Select the Internet Connection. Default is "Direct Connection".
g)Choose a Download site.  Default is http:/download.osgeo.org.
h) Look at the final screen shot I sent you.  I you select "desktop", 
you will see current version  number (if installed) and the new 
version number.  Select "qgis: QGIS Desktop" for 3x or "qgis: 
qgis-ltr-full." for 2.x.  Or both.  Other packages will be selected 
for you (like Saga, Grass.) Do not deselect them.  You will also need 
to accept all licences  during the install and you will probably be 
asked to add extra packages along the way. Accept them.


For me, the normal procedure on a new computer is to start with an 
Express Desktop Install.  Then, I do an "advance Install" to add 
extra packages or different versions of QGIS.


Nicolas

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user