Re: [Qgis-user] Labeling: Allow HTML Formatting, text-size and map units

[Stefan Giese (WhereGroup) via QGIS-User]

Hi Thomas,

you can try to involve the map_scale variable into a dynamic size of the 
HTML Label, something like:


with_variable('fs', 25000/@map_scale,
  format(
     '%2',
 @fs , title( "Name" )))

Best regards

Stefan

Am 15.05.2024 um 09:13 schrieb Thomas Schüttenberg via QGIS-User:

Hi there!

I am just playing arund with html enhanced labeling, using the option "Allow HTML 
Formatting" on the text tab 
(https://docs.qgis.org/3.34/en/docs/user_manual/style_library/label_settings.html#text-tab).

Now I wonder how/if it is possible to override the text-size in such a manner, 
that my label as a whole is still scale dependend and is respecting the given 
map units including the minimum and maximum scale 
(https://docs.qgis.org/3.34/en/docs/user_manual/introduction/general_tools.html#unit-selector)?

Imagine you have a multi line label with the text size set to 2 meters map 
units and a maximum scale at 1:5000.
Now the first line should be double in text size and therefore I use something like 
style="font-size:20pt" (see example in manual above).

But only pt (points) seams to work as the unit in this place, which gives a 
fixed size throughout all scales and does not respect the behavior of the map 
units with maximum scale setting.

Does anyone know a trick to achieve this anyhow?

All the Best!
Thomas
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
*
Aufwind durch Wissen!
Web-Seminare und Online-Schulungen
bei der www.foss-academy.com
*
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885


___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] WFS: Change symbolization (outline color/thickness and fill) using Python in QGIS.

[Stefan Giese (WhereGroup) via QGIS-User]

Hi mikeE

here is a small example based on your code:

uri = 
'https://www.geodatenportal.sachsen-anhalt.de/wss/service/ST_LVermGeo_ALKIS_WFS_OpenData/guest?=WFS=1332412,6708967,1333423,6709355=1=auto=ave:GebaeudeBauwerk=EPSG:25832=false=true'

lyr14 = QgsVectorLayer(uri, "LSA: ALKIS Gebäude (WFS)" , 'WFS')
# Farbe ändern
lyr14.renderer().symbol().setColor(QColor("red"))
lyr14.renderer().symbol().symbolLayer(0).setStrokeColor(QColor("blue"))
lyr14.renderer().symbol().symbolLayer(0).setStrokeWidth(0.5)
#lyr14.triggerRepaint() #braucht es nur wenn schon geladen
# Legende updaten
iface.layerTreeView().refreshLayerSymbology(lyr14.id())
QgsProject.instance().addMapLayer(lyr14)

Am 09.04.2024 um 15:28 schrieb Elstermann, Mike via QGIS-User:

Hello everyone,

I have a code snippet to load a WFS, how can I easily change the symbolization 
(outline color/thickness and fill) using Python in QGIS?.

  def addWFS14(self):
 uri = 
'https://www.geodatenportal.sachsen-anhalt.de/wss/service/ST_LVermGeo_ALKIS_WFS_OpenData/guest?=WFS=1332412,6708967,1333423,6709355=1=auto=ave:GebaeudeBauwerk=EPSG:25832=false=true'
 lyr14 = QgsVectorLayer(uri, "LSA: ALKIS Gebäude (WFS)" , ‚WFS')
 QgsProject.instance().addMapLayer(lyr14)


Thanks & best regards, mikeE.


___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
*
Aufwind durch Wissen!
Web-Seminare und Online-Schulungen
bei derwww.foss-academy.com
*
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Intermediate save of the QGIS-project

[Stefan Giese (WhereGroup) via QGIS-User]

Hi Sylvia,

there is an autosaver Plugin available: 
https://github.com/enricofer/autoSaver


Best regards

Stefan

Am 27.02.2024 um 10:45 schrieb Preuß, Sylvia via QGIS-User:


Hello,

is there a setting to save *.qgz / *.qgs e.g. automatic every 20 minutes?

I don’t mean the data but the project.

Thank you.

Sylvia


*
Der E-Mail-Dienst des Oberbergischen Kreises dient ausschließlich der 
dienstlichen Kommunikation.
Senden Sie deshalb keine E-Mails privaten Inhalts an E-Mail-Adressen 
des Oberbergischen Kreises.*
Es wird darauf hingewiesen, dass neben der Person, an die Ihre E-Mail 
gerichtet ist, auch deren Vertretung im Amt einen unmittelbaren 
Zugriff auf Ihre Nachricht hat. Für Berufsgeheimnisträger und 
besondere Funktionsträger gelten abweichende Regelungen.
Es wird außerdem darauf hingewiesen, dass die Kommunikation per E-Mail 
ohne Authentifizierung und Verschlüsselung unsicher ist, da für 
unberechtigte Dritte grundsätzlich die Möglichkeit der Kenntnisnahme 
und Manipulation besteht.
Es wird deshalb keine Verantwortung für den Inhalt dieser Nachricht 
übernommen, da eine Manipulation nicht ausgeschlossen werden kann.
Obwohl alle angemessenen Vorkehrungen getroffen wurden, um 
sicherzustellen, dass Anlagen dieser E-Mail virusgeprüft sind, wird 
empfohlen, anhängende Dateien vor dem Öffnen durch Ihr eigenes 
Virus-Programm zu prüfen, da keinerlei Haftung für Schäden übernommen 
wird, die infolge etwaiger Software-Viren entstehen könnten.
Der Inhalt dieser E-Mail ist ausschließlich für die bezeichnete Person 
bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder 
dessen Vertretung sein sollten, beachten Sie bitte, dass jede Form der 
Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des 
Inhalts dieser E-Mail unzulässig ist. In diesem Fall wird darum 
gebeten, sich mit der absendenden Person der E-Mail in Verbindung zu 
setzen.



___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
**
FOSSGIS Konferenz
20.-23. März 2024 in Hamburg
https://www.fossgis-konferenz.de/2024/

WhereGroup-Beiträge auf der FOSSGIS
https://wheregroup.com/unternehmen/aktuelles/
**
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Identifying / Digitising small surface features automatically

[Stefan Giese (WhereGroup) via QGIS-User]

Hi,

yes that is possible to automate this process. The main idea is to use 
an blur-filter on your DSM - a normalized 2D gauss kernel array for 
convolutions - where the size of the kernel determines the wide of the 
features that will be extracted. The second step is to build the 
difference between DSM and DSM_blured. So the small features will 
remain. for more theory see: 
https://www.isprs.org/proceedings/xxxvi/8-w2/SITTLER.pdf


Some years ago - in my former ArcGIS job - I've wrote a small python 
routine for ArcGis using numpy to do the job. The ArcGis script could be 
found here: https://files.wheregroup.com/s/qMdZB8TH8FWWboQ and can be 
adapted to QGIS.


Best regards

Stefan

Am 05.02.2024 um 20:45 schrieb Steve Research via QGIS-User:

Does anyone know how to locate small features on a digital surface model (dsm) 
in qgis and get their coordinates?

I have a field surface with distributed molehills they show up in the dsm but 
is there a tool that will mark them as objects to digitise their locations?

I have Qgis + Saga etc. but don’t know if there is a process to mark these 
without having to do it by hand (I have lots of fields to do!).



Sent from my iPhone

___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
**
Aufwind durch Wissen!
Web-Seminare und Online-Schulungen
bei der www.foss-academy.com/
**
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885

___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Visualize time data at a certain point in time

[Stefan Giese (WhereGroup) via QGIS-User]

Hi Marco,

 in that case I would choose "Separate Fields for Start and End 
Date/Time" in the Drop down box at the Top and then use your 
valid-from-attribute and a valid-to-attributefields...


Best regards

Stefan

Am 15.01.2024 um 10:21 schrieb Marco Hugentobler via QGIS-User:

Hi all,

I have a dataset with a valid-from-attribute and a valid-to-attribute 
and need to visualize the data at certain points in time. I'm opening 
the temporal control panel and select 'Fixed range temporal 
nagivation'. There I enter two timestamps around the point in time as 
text. To visualize another point in time, entering two timestamps as 
text is required again.
Wouldn't it be better for this use case to have a mode where just 
entering one timestamp is required (possibly with a graphical 
date/time picker)? Or is this already possible and I just did not see it?


Thanks,
Marco


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
**
Aufwind durch Wissen!
Web-Seminare und Online-Schulungen
bei der www.foss-academy.com/
**
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885

___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Oracle DB connection in QGIS

[Stefan Giese (WhereGroup) via QGIS-User]

Hi Michaela,

did you check theese options?

 * "Use estimated table metadata"
 * "Only look for user tables"

best regards
Stefan

Stefan Giese
Projektleiter/Consultant
**
Where2B Konferenz 2023
14. Dezember 2023 in Bonn und Online
https://where2b-conference.com/
**
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885

Am 15.12.2023 um 08:28 schrieb Huesmann, Michaela via QGIS-User:


Hello QGIS Users,

I need to access an Oracle Database in QGIS. The scheme I need to 
connect to has plenty of tables and Views and it seems that all data 
is loaded in the background even before I was able to select the few 
tables I will really need. This lakes a lot of time.


Is this a normal behaviour or can I ajust something in Database 
options? Thanks for your help!


Best regards,

Michaela


Kreisstadt Steinfurt 

 - 48565 Steinfurt
www.steinfurt.de 

Mit freundlichen Grüßen
im Auftrag
MichaelaHuesmann
IT
Fachdienst Tiefbau

Tel.: +49 2552 925 219
Fax:
E-Mail: michaela.huesm...@stadt-steinfurt.de 




Bitte denken Sie an die Umwelt, bevor Sie diese E-Mail ausdrucken.


___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-us___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Specific pages to export from Map Atlas

[Stefan Giese (WhereGroup) via QGIS-User]

Hi,

you can use the page properties of your layout -just right click into 
your layout and select "page properties". There is a checkbox "Exclude 
pages from export" which can be overided by an expression like: /

/

/@atlas_featureid not in (8,9,10,11,12)/

Best regards

Stefan/
/

Am 27.10.2023 um 16:32 schrieb krishna Ayyala via QGIS-User:

Hello,
I have a map with 70 pages which I created using using Atlas feature 
in the layout. If want to export only specific page range; for ex:pg 8 
to pg12, how can I do that?


Thank you and Regards.

___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
**
Where2B Konferenz 2023
14. Dezember 2023 in Bonn und Online
https://where2b-conference.com/
**
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] No visualizo archivos laz en QGIS

[Stefan Giese (WhereGroup) via QGIS-User]

mira aqui:

Am 30.06.2023 um 10:28 schrieb Rafa García via QGIS-User:


Buenos días,

Estoy utilizando QGIS en versión 3.28.8 Firenze en mi sistema Windows 
10 de 64 bits


He cargado archivos .laz y no veo los puntos en el panel, solo veo una 
cuadrícula de trazos roja.


¿Necesito instalar algún complemento?

Gracias por la respuesta.

Saludos,

Rafa García

fotor...@gmail.com


___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
-
Aufwind durch Wissen!
Web-Seminare und Online-Schulungen
bei derwww.foss-academy.com
-
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Qgis atlas print composer : aggregate (bigger overlap)

[Stefan Giese (WhereGroup) via QGIS-User]

Hi,

you can use overlay functions instead, there you can sort the size of 
intersection and take the biggest one:


/overlay_intersects(layer:='//PARCEL_LAYER//', expression:="parcel_id", 
sort_by_intersection_size:='des')[0]/


hope this helps
Stefan

Am 12.06.2023 um 14:04 schrieb celati Laurent via QGIS-User:

Good afternoon,
With Qgis 3.30, In the composer interface, I generate an atlas.
My iteration layer is a polygonal layer (platforms). I added a text 
element to automatically get by spatial intersection the 'parcel_id' 
attribute present in another polygonal layer. I use the aggregate 
function for this task :


/  aggregate(
'LAYER':="PARCEL_LAYER',aggregate:='concatenate',
  expression:="parcel_id",
filter:=intersects(geometry(@parent), $geometry))/

It works. But the result shows values of all the intersections. I 
would like it limit to the result of the biggest intersection. Would 
you know how to do it?


Thanks a lot.

___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
--
Aufwind durch Wissen!
Jetzt neu: Webinare und Online-Schulungen
bei derwww.foss-academy.com
--

WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Fon: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885



OpenPGP_signature
Description: OpenPGP digital signature
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] To show road reference numbers like Google with background svg syymol.

[Stefan Giese (WhereGroup) via QGIS-User]

Hi Paul,

did you check this nice Blog article from Anita: 
https://anitagraser.com/2011/12/23/google-road-symbols-for-qgis/


best

Stefan

Am 13.04.2023 um 09:03 schrieb Paul N via QGIS-User:

Hi,
I want to show road reference numbers as looks in Open street map or 
Google map in QGIS. NH23, SH4 etc.


Is it possible with font marker or any other way.
I have two options, 1st to use label with background. 2nd is font 
marker which I don't know?


Is there any best way to do this?

Regards

Paul N

___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
-
Aufwind durch Wissen!
Web-Seminare und Online-Schulungen
bei der www.foss-academy.com
-
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885

___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] hover over mouse to read raster value not showing in 3.30.0

[Stefan Giese (WhereGroup) via QGIS-User]

Hi Paul,

you have to disable the "Auto open form on single feature results" 
option before


Best regards

Stefan

Am 20.03.2023 um 12:10 schrieb Paul N via QGIS-User:
I am trying to read raster values by hover over mouse to read raster 
value, but option not visible in identifying tool setting. It only 
shows three option already exists in qgis 3.28.3. Mouse hower option 
not visible in 3.30.0 .


Regards

Paul N

___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
**
FOSSGIS Konferenz
15.-18. März 2023 in Berlin
https://fossgis-konferenz.de/2023/

WhereGroup-Beiträge auf der FOSSGIS
https://wheregroup.com/unternehmen/aktuelles/
**
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS on tablets

[Stefan Giese (WhereGroup) via QGIS-User]

in addition what Phil wrotes: Mergin Maps is also available for windows: 
https://github.com/MerginMaps/input/releases/tag/2.0.1


Best regards

Stefan

Am 20.02.2023 um 09:23 schrieb Phil Wyatt via QGIS-User:

Hi folks,

I would encourage you to also check out Mergin Maps that will work on 
IOS or Android devices. Maybe also spell out why Windows is required 
or where the apps fail. The developers may be able to assist in 
solving issues. Plenty more “rugged” devices available in Android or 
with rugged cases in IOS.


I have used Panasonic tough books in the past but tablets or even 
phones are just so much more useful these days (depending on your use 
case)



Cheers - Phil,
On the road with his iPad

On 20 Feb 2023, at 6:17 pm, Chiz Harward via QGIS-User 
 wrote:




Thanks all, weight is indeed an issue, and given I’ll be up a 
scaffold/down trenches, I’ll probably have a harness/strap of some 
sort to avoid dropping it... My GIS boffin has done some tests and 
test project is running fine on his 4GB RAM 56 GB tablet, so hoping 
can use a cheaper machine and with SSD


thanks

Chiz Harward BA MCIfA he/him

Senior Archaeologist, Urban Archaeology

Cathedral Archaeologist, Winchester

I work flexibly - so whilst it suits me to email now, I do not expect 
a response or action outside of your own working hours



http://urban-archaeology.blogspot.com

https://www.facebook.com/urb.arch/

http://gloscross-slabs.blogspot.co.uk/


Urban Archaeology

2 Slad View,

Gaineys Well,

Stroud,
Gloucestershire
GL5 1LQ

07881 486837
c...@urban-archaeology.co.uk

Urban Archaeology is a trading name of Chiz Harward BA MCIfA



https://archaeology.co.uk/awards/rescue-project-of-the-year-2023.htm

*From:*Jésahel Benoist 
*Sent:* 17 February 2023 18:04
*To:* rdmaili...@duif.net
*Cc:* Chiz Harward ; qgis-user ML 


*Subject:* Re: [Qgis-user] QGIS on tablets

Hi,

We bought some years ago the Dell Rugged Extreme tablet and I want to 
say : test before buy !


Even if QGIS works flawlessly with big projects, the Windows "tablet" 
environment is just a pain, especially the virtual keyboards (plural 
form as Microsoft has been unable to give something polished so we're 
using two)


Add to this that this real computer needs a lot of power, batteries, 
so is so heavy that that you need a necklace to handle it all day.


But the worst is the "Rugged" definition. Could you imagine that 
there's fans, that they are accessible behind plastic to the most 
common and dangerous thing for fan on earth : dust. Look on the 
fourth picture to see the fan grid.


https://www.dell.com/fr-fr/shop/ordinateurs-portables/latitude-7220-rugged-extreme/spd/latitude-12-7220-tablet/xctol7220emea

You see the point. Good luck and please share your finds.

J. Benoist

Le ven. 17 févr. 2023 à 14:50, Richard Duivenvoorde via QGIS-User 
 a écrit :


I'm (just playing) with this tablet: ThinkPad X1 Tablet Gen3
It comes with Windows, but I run Debian Testing on it and I
really like it, even the use of the pen.
Not sure about ruggedized cases for it though.

I'm afraid you will end up with the normal ruggedized Windows
tablets which are available (and pretty expensive)?

Regards,

Richard Duivenvoorde

On 2/17/23 14:43, Chiz Harward via QGIS-User wrote:
> Hi,
>
> I am looking for suggestions/spec for a Windows* tablet** that
can run QGIS during data collection and recording on
archaeological sites (dusty, sometimes damp). The work is
recording simple attributes and short text comments onto
shapefiles of e.g. wall elevations (up to 20,000 polygons,
although these could be split up). There will be geo-tif
orthophotos of the wall elevations/plans as well, although these
could be lo-res. All processing and analysis will be done in
office on a desktop, tablet is just for recording.
>
> Need a tablet that can work rapidly without beachballing
between commands or when pan across mapping. SSD, 8GB RAM enough?
Any advice appreciated,
>
> *QField is not suitable for this project
>
> **must be a tablet that can fit in a ruggedised case, laptops
are no good for the work
>
> Best wishes
>
>
> Chiz
>
>
> ___
> QGIS-User mailing list
> QGIS-User@lists.osgeo.org
> List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
> Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] [Modeller] How to calculate area in the graphical modeler of QGIS

[Stefan Giese (WhereGroup) via QGIS-User]

Hi,

may be it will be easier to use thhis algorithm: "Add geometry 
attributes" -> 
https://docs.qgis.org/3.10/en/docs/user_manual/processing_algs/qgis/vectorgeometry.html?highlight=exportaddgeometrycolumns#add-geometry-attributes


best regards

Stefan

Am 30.01.2023 um 14:13 schrieb Igor Oliveira Ribeiro via QGIS-User:

Hi community,
I need your help. I'm using QGIS 3.10.11 with Grass 7.8.4. I'm 
building a QGIS modeler and I want to calculate the area of an input 
polygon.


So, my input polygon is a vector feature. I tried using a field 
calculator ($area) and Advanced Python Field Calculator (Field 
"Formula", I used "value = $geom.area() ).


However, nothing is working. When I run the modeler, there is no error 
message. But, I'dont have the area calculated either.


Thanks for your help.

--

See our last paper: 

Impact of biomass burning on a metropolitan area in the Amazon during 
the 2015 El Niño: The enhancement of carbon monoxide and levoglucosan 
concentrations. 




Igor Oliveira Ribeiro

Post-Doc on Regional Climate Change, Vulnerability, Impacts and 
Adaptation - Cuomo Foundation/UEA



+55 92 98103 7136 | skype: igorflorestal


Universidade do Estado do Amazonas | Instituto Nacional de Pesquisas 
da Amazônia



Visite: www.geoescrita.com.br 




Think globally, act locally!


___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
**
FOSSGIS Konferenz
15.-18. März 2023 in Berlin
https://fossgis-konferenz.de/2023/

WhereGroup-Beiträge auf der FOSSGIS
https://wheregroup.com/unternehmen/aktuelles/
**
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] transferring data from ArcGis to QGIS

[Stefan Giese (WhereGroup) via QGIS-User]

Hi Janet,

beside what Alexandre pointed out, there is an other free Open source 
tool to convert ArcMap mxd files into QGIS projects (MapQonverter, 
https://github.com/WhereGroup/mapqonverter). The difference to SLYR is, 
that MapQonverter must be used within ArcMap as an ArcMap Python 
toolbox. So it is only useful if you still have an ArcMap licence to 
work with.


Best regards

Stefan

Am 20.01.2023 um 02:50 schrieb Alexandre Neto via QGIS-User:

Hello Janet,

It will really depend on what you mean by all your work. The projects 
and layouts are hard to come by, as they are in closed source format, 
which ain't interoperable with other software. But the data may be in 
one of hundreads of formats readable by QGIS, like Shapefiles and 
Filegeodatabases.


There's a plugin that tries to import QrcGIS styles into QGIS, but not 
sure what it can do. It's called SLYR, there a paid version and a 
community version/




Janet via QGIS-User  escreveu no dia 
quinta, 19/01/2023 à(s) 21:20:


For a number of years, whilst a student and on the staff of
University I have used ArcGis.  After this year I will be retiring
from University and losing this access.  I would like to copy all
my work over to QGIS, so that I can continue my research, could
you let me know if this is possible and where I can locate
directions to do it.  I have all my work on an external hard drive.

Many thanks

Janet
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
-
Aufwind durch Wissen!
Jetzt neu: Web-Seminare und Online-Schulungen
bei derwww.foss-academy.com
-
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS & GPS

[Stefan Giese (WhereGroup) via QGIS-User]

Hi Brent,


we solved this for one of our customers with the following steps:

 * Installing U-Center on the windows computer:
   https://www.u-blox.com/en/product/u-center
 * in U-Center -> View -> Configuration view → NMEA (NMEA Protocol)
 * change "Main Talker ID" to "1 – GP(GPS)"
 * click on "SEND" and then on "POLL"
 * now QGIS should directly communicate

hope this helps

Stefan

Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
-
Aufwind durch Wissen!
Jetzt neu: Web-Seminare und Online-Schulungen
bei derwww.foss-academy.com
-
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885


Am 20.01.2023 um 03:50 schrieb Brent Wood via QGIS-User:

Gidday and Happy New Year from New Zealand!

I have spent too many hours on this already, sigh... Hopefully someone 
can help.


I normally use QGIS with USB GPS units on Linux and don't have driver 
issues, everything just works. But I now need to re-introduce myself 
to QGIS on Windows to set things up for other users, and it is proving 
very painful.


I'm using QGIS dev (3.29), 3.22 & v3.28 at present. Same issue on 
Windows with all of them.


I have historically used a Globalsat BR-355S4 USB GPS on Windows with 
no problems. Just install the Prolific USB-serial driver and 
everything works fine.


My recent Linux work has been using a G-Mouse (U-blox 7) chipset GPS 
which Linux typically mounts as /dev/ttyACM0 and QGIS is fine with 
that. Linux needs no additional drivers to be installed for this to work.


Now I'm trying to get this working on Windows... I can install the 
U-blox VCP (virtual com port) driver. The native driver Win10 finds & 
installs also  seems to work, but not with QGIS. I can connect to the 
relevant com port with several GPS monitoring applications & see the 
NMEA sentences fine. QGIS lists the port OK, but fails to connect on 
auto or to the port directly. This is not uncommon with the U-Blox 7, 
but none of the fixes I have found online have worked for me.


I just bought anotherGPS, a new model Globalsat one, BU-353N5, a 
replacement for the BR-355S4. This is not sending the $GP sentences, 
just the $GN ones. My GPS monitoring applications work OK with this on 
Linux & Windows, but QGIS on both platforms lists the device to 
connect to, but is unable to connect & use the GPS data. I can't even 
log the data with QGIS as QGIS won't connect to the port in the first 
place.


My 3 questions:

How can I get a U-Blox7 chipset GPS (which is working fine on Windows 
with other applications) recognised by and working with QGIS?


How can I get a Globalsat  BU-353N or other GPS that does not output 
$GPGGA or $GPRWC, but provides $GNGGA instead, etc working with QGIS?


Can anyone suggest an alternative cheap, generic USB GPS which simply 
and reliably works with QGIS on Windows?


Is this something that I should file a bug report for (it does seem to 
be a fragility in QGIS that is not present in other GPS software)? I'm 
happy to send a working USB GPS to any dev willing to look into this.



Thanks

Brent Wood

Principal Technician, Fisheries
NIWA
DDI:  +64 (4) 3860529
  Brent Wood
Principal Technician - GIS and Spatial Data Management
Programme Leader - Environmental Information Delivery
+64-4-386-0529

National Institute of Water & Atmospheric Research Ltd (NIWA)
301 Evans Bay Parade Hataitai Wellington New Zealand
*Connect with NIWA:* niwa.co.nz  Facebook 
 LinkedIn 
 Twitter 
 Instagram 



To ensure compliance with legal requirements and to maintain cyber 
security standards, NIWA's IT systems are subject to ongoing 
monitoring, activity logging and auditing. This monitoring and 
auditing service may be provided by third parties. Such third parties 
can access information transmitted to, processed by and stored on 
NIWA's IT systems


___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
___
QGIS-User mailing list
QGIS-User@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] edit QGIS3.ini with startup.py

[Stefan Giese (WhereGroup) via Qgis-user]

Hi Thomas,

you can clear the section before adding the new values with:

/QgsSettings().remove('svg/searchPathsForSVG')/

and then add your values

Best regards

Stefan

Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
-
Aufwind durch Wissen!
Jetzt neu: Web-Seminare und Online-Schulungen
bei derwww.foss-academy.com
-
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885

Am 05.12.2022 um 13:40 schrieb Thomas Schüttenberg via Qgis-user:

Hi there!
Because our servers have moved, the search paths for SVGs have changed. 
Unfortunately what we didn't think about before is that these old, wrong paths 
are (still) in the QGIS3.ini of the local user profiles and now cause eternal 
delays at startup because of their unreachability.

We already use a startup.py to add file paths in centralized manner, like this

gdi_global_svg = 'L:/Daten/geoservice/config/qgis_global_settings/svg'
svg_paths = QgsSettings().value('svg/searchPathsForSVG')
if gdi_global_svg in svg_paths:
 pass
else:
 svg_paths.append(gdi_global_svg)
 QgsSettings().setValue('svg/searchPathsForSVG', svg_paths)

Despite my still lacking Python knowledge, I thought one could easily include a 
corresponding fix (e.g. search and replace) in the startup.py script...
I am still googling but maybe someone could help me with this, please? That 
would save my day!

Best regards
Thomas
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
-
Aufwind durch Wissen!
Jetzt neu: Web-Seminare und Online-Schulungen
bei derwww.foss-academy.com
-
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Determine version of QGIS Server

[Stefan Giese (WhereGroup) via Qgis-user]

see 
https://github.com/3liz/lizmap-web-client/issues/1346#issuecomment-547895968


Am 04.08.2022 um 09:32 schrieb Inka Tauber via Qgis-user:


Hello,

how can the version of QGIS Server (qgis_mapserv.fcgi) be determined?

Thanks,

Inka


Allgemeine Datenschutzinformation:
Der telefonische, schriftliche oder elektronische Kontakt mit dem 
Ministerium für Klimaschutz, Landwirtschaft, ländliche Räume und 
Umwelt Mecklenburg-Vorpommern ist mit der Speicherung und Verarbeitung 
der von Ihnen ggf. mitgeteilten persönlichen Daten verbunden. 
Rechtsgrundlage hierfür ist Art. 6 Absatz 1 Buchstabe e der 
Datenschutzgrundverordnung (DSGVO) der Europäischen Union in 
Verbindung mit § 4 Abs. 1 Landesdatenschutzgesetz (DSG M-V).
Weitere Informationen erhalten Sie hier: 
https://www.regierung-mv.de/Datenschutz


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
-
Aufwind durch Wissen!
Jetzt neu: Web-Seminare und Online-Schulungen
bei derwww.foss-academy.com
-
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Counting of bridges on road.

[Stefan Giese (WhereGroup) via Qgis-user]

Hi Paul,

try: count("bridge", filter:="bridge"='T' AND is_selected())

best regards

Stefan

Am 04.08.2022 um 07:01 schrieb Paul N via Qgis-user:

Hi,
I have road layer and segment the road where bridge exist by a field 
'bridge' =T in road layer.


I am able to count number of bridges using
count("bridge", filter:="bridge"='T').

How to count the number of bridges on selected roads?

Any clue?

Regards
Paul

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
-
Aufwind durch Wissen!
Jetzt neu: Web-Seminare und Online-Schulungen
bei der www.foss-academy.com
-
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] QGIS WINDOWS 11

[Stefan Giese (WhereGroup) via Qgis-user]

Hi Samuel,

I have installed on my Win11 Notebook 3.10, 3.16, 3.18 and 3.22, all 
without any problems. And I would agree to what Hannes pointed out: 
update to a newer QGIS version, it's worth to do it, so many cool 
features are waiting for you and your students...


Best regards

Stefan

Am 15.06.2022 um 11:21 schrieb Johannes Kröger (WhereGroup) via Qgis-user:


Hey Samuel,

it's hard to give guarantees when it comes to software but: I don't 
think there should be any issues with *modern* QGIS versions on 
Windows 11. QGIS 3.4 is 3 years old though and in no way supported any 
more. Please try to use QGIS 3.22 or later if you are worried about 
modern Windows support.


Cheers, Hannes

Am 15.06.22 um 08:09 schrieb sam via Qgis-user:


Hello !

I’m about to buy a new computer for my next year of university. I’ll 
have some Qgis lessons and I would like to know if all the Qgis 
versions are compatibles with Windows 11 (espacially the 3.4.9 ones).


Thanks for your help !

Samuel


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user

--
Johannes Kröger / GIS-Entwickler/-Berater

-
Schon gewusst?
In unserem Blog geben wir Tipps & Tricks zu Open-Source-GIS-Software
und berichten aus unserem Experten-Alltag:
https://wheregroup.com/blog/
-

WhereGroup GmbH
Grevenweg 89
20537 Hamburg
Germany

Tel: +49 (0)228 / 90 90 38 - 36
Fax: +49 (0)228 / 90 90 38 - 11

johannes.kroe...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885
---

___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
-
Aufwind durch Wissen!
Jetzt neu: Web-Seminare und Online-Schulungen
bei derwww.foss-academy.com
-
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Fwd: Creating a polygon around vertices

[Stefan Giese (WhereGroup) via Qgis-user]

search for concavehull or see this one https://youtu.be/24H_MyXohL4

Am 12.04.2022 um 14:36 schrieb Yamen Tekaji via Qgis-user:



Dears,

I have a layer containing 700K points. please check attachment.
I want to create a polygon that passes through the outer points only. 
an outline polygon.

Can you please help me in achieving this?
If you know a web page that teaches this in details, it will 
be helpful and appreciated.


Thanks
Yamen



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
-
Aufwind durch Wissen!
Jetzt neu: Web-Seminare und Online-Schulungen
bei derwww.foss-academy.com
-
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Atlas Map book - Display only one feature on each page.

[Stefan Giese (WhereGroup) via Qgis-user]

This is a bit tricky but can be done with rule based renderer:

In my example I have an attibute "name" and with the following rule:

/name=attributes(@atlas_feature)['name']/

you can set the visible features to the atlas feature and then only the 
atlas feature will be displayed in your atlas


Am 08.03.2022 um 04:24 schrieb krishna Ayyala via Qgis-user:

Hello,
I am reposting this question. Can anyone help me?This is the map on my 
Print composer window. In my attribute table, I have a field called 
Line_ID. There are three lines in this field; LINE 1, LINE 2 AND LINE 
3..I wish to export this to mapbook. My mapbook will have 3 pages. I 
wish to export such that, each page has only one line. i.e. Page1 
should have LINE 1, Page2 should have LINE 2 AND Page3 should have 
LINE 3. What should be the setting in my Atlas window to accomplish 
this task?

image.png
image.png



___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
**
FOSSGIS Konferenz
09.-12. März 2022 online
https://www.fossgis-konferenz.de/
**
WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Tel.: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user

Re: [Qgis-user] Windows 11

[Stefan Giese (WhereGroup) via Qgis-user]

yes, QGIS 3.18, 3.22 and 3.24 without any problems so far

best regards

stefan

Am 04.03.2022 um 06:03 schrieb Grant Boxer via Qgis-user:


I have a client who is running QGIS under Windows 11 and is having all 
sorts of stability problems and has gone back to version 3.4. Has 
anyone used QGIS with Windows 11?


Grant Boxer, Perth WA


___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info:https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe:https://lists.osgeo.org/mailman/listinfo/qgis-user


--
Mit freundlichen Grüßen
Stefan Giese
Projektleiter/Consultant
--
Aufwind durch Wissen!
Jetzt neu: Webinare und Online-Schulungen
bei derwww.foss-academy.com
--

WhereGroup GmbH
Schwimmbadstr. 2
79100 Freiburg
Germany

Fon: +49 (0)761 / 519 102 - 61
Fax: +49 (0)761 / 519 102 - 11

stefan.gi...@wheregroup.com
www.wheregroup.com
Geschäftsführer:
Olaf Knopp, Peter Stamm
Amtsgericht Bonn, HRB 9885



OpenPGP_signature
Description: OpenPGP digital signature
___
Qgis-user mailing list
Qgis-user@lists.osgeo.org
List info: https://lists.osgeo.org/mailman/listinfo/qgis-user
Unsubscribe: https://lists.osgeo.org/mailman/listinfo/qgis-user