Re: [ql-users] Gold Card and Aurora
At 18.35 03/05/2004, you wrote: Hi all, anybody remember if a Gold Card 2 (The red one) needs more than bridging the 7805 to make it work with a backplane? I remember reading on my Q-plane documentation (That I do not have anymore) that it needed more work than that Phoebus You need also to disconnect a diode and a resistor, and add a wire link, otherwise the backup clock will not work. I can send send to you an image (the file is about 950 Kb long) of the sheet describing these modifications. Please let me know. Apologies for my poor English. Bye ___ QL-Users Mailing List
Re: [ql-users] Gold Card and Aurora
On Tue, 4 May 2004 at 10:41:32, Romaldo Parodi wrote: (ref: [EMAIL PROTECTED]) At 18.35 03/05/2004, you wrote: Hi all, anybody remember if a Gold Card 2 (The red one) needs more than bridging the 7805 to make it work with a backplane? I remember reading on my Q-plane documentation (That I do not have anymore) that it needed more work than that Phoebus You need also to disconnect a diode and a resistor, and add a wire link, otherwise the backup clock will not work. I can send send to you an image (the file is about 950 Kb long) of the sheet describing these modifications. Please let me know. Apologies for my poor English. I assume this is because Qplane does not link all the expansion socket connections? Mplane does, so I assume it is OK? -- QBBS (QL fido BBS 2:252/67) +44(0)1442-828255 tony@surname.co.uk http://www.firshman.co.uk Voice: +44(0)1442-828254 Fax: +44(0)1442-828255 TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG ___ QL-Users Mailing List
Re: [ql-users] Gold Card and Aurora
anybody remember if a Gold Card 2 (The red one) needs more than bridging the 7805 to make it work with a backplane? I remember reading on my Q-plane documentation (That I do not have anymore) that it needed more work than that Phoebus You need also to disconnect a diode and a resistor, and add a wire link, otherwise the backup clock will not work. These components are located on Gold Card's PCB. I assume this is because Qplane does not link all the expansion socket connections? Mplane does, so I assume it is OK? I don't know Mplane's details, whatever these modifications are required for getting GC fully working at 5 Volt regardles of expansion type socket's you use. Remember to bridge 7805 regulator. See image I sent privately. Bye. Romaldo ___ QL-Users Mailing List