Re: [qmailtoaster] sending out newsletters using qmailtoaster
Am 06.07.2010 um 22:55 schrieb Tonix (Antonio Nati): Also note that, if you send one mail to 50 recipients, this will result in 50 individual items in the queue. As long as but one of these items is still unsent, qmailctl queue will list all 50 items as still being in the queue but will indicate with each item if said item has been sent. Once all items belonging to the message have been sent, they'll all no longer be shown in the queue. Is that the behavior you see when saying some messages need a long time to send? If I send to 50 recipients on the same remote domain, I will have 50 connections opened to the same remote server... So, if remote server has limit on new connections, some deliveries will abort and retry nextly. Very true. You could use your number of concurrent connections more effectively when each was used to transmit more than one message. But of course this (if anyone actually were to rewrite the way qmail's queuing works) would only be a relief and eliminate the problem: Depending on the allowed chunk size (messages per session allowed for a given target domain) and the number of messages sent to that domain, you might still end up being 'tarpit'ed. But I guess the whole discussion is a moot point in so far as there is (afaik) no such patch for qmail in existence. Martin - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Dynamic IP rejection notices
To all, I have just set up another (that makes 5) Qmail Toaster installations (I love this product), but this one is the first that has a dynamic IP. Apart for a few issues, which have been resolved, I am now getting rejections due to the Dynamic IP and Spam sites. What can I do to stop this. Please see the rejection message below. Hi. This is the qmail-send program at msrvprl.domainname.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. i...@recipient.com.: User and password not set, continuing without authentication. 196.41.124.15 does not like recipient. Remote host said: 554 5.7.1 dsl-240-15-122.telkomadsl.co.za [41.240.15.122]: Client host rejected: ADSLDIRECT 27 you must relay your mail through your upstream provider if you are connected via an ADSL line with a dynamic ip Giving up on 196.41.124.15. Cheers - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Dynamic IP rejection notices
Hi Mike, I am afraid you will probably not have much luck with this. A dynamic IP address will make lots of ISPs think you are a spammer and the only way I know to avoid this is to sign up for a fixed IP address. Martin Am 07.07.2010 um 09:34 schrieb Mike Canty: To all, I have just set up another (that makes 5) Qmail Toaster installations (I love this product), but this one is the first that has a dynamic IP. Apart for a few issues, which have been resolved, I am now getting rejections due to the Dynamic IP and Spam sites. What can I do to stop this. Please see the rejection message below. Hi. This is the qmail-send program at msrvprl.domainname.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. i...@recipient.com.: User and password not set, continuing without authentication. 196.41.124.15 does not like recipient. Remote host said: 554 5.7.1 dsl-240-15-122.telkomadsl.co.za [41.240.15.122]: Client host rejected: ADSLDIRECT 27 you must relay your mail through your upstream provider if you are connected via an ADSL line with a dynamic ip Giving up on 196.41.124.15. Cheers - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- In everyone there sleeps A sense of life lived according to love. To some it means the difference they could make By loving others, but across most it sweeps As all they might have done had they been loved. That nothing cures. Philip Larkin 'Faith Healing' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] sending out newsletters using qmailtoaster
I would like to share my view on this topic For example, if you send 50 emails to yahoo domain, as per my knowledge qmail takes 50 connections to same remote server and delivers the message. Of-course yahoo limits the connection from single IP. So what i want to add here is, if there is 50 emails. As yahoo has many backup MX servers, what qmail has to do is it should check for the secondary mx servers and delivers message like 10 emails on each server. With Regards Vinay On Wed, Jul 7, 2010 at 11:48 AM, Martin Waschbuesch mar...@waschbuesch.dewrote: Am 06.07.2010 um 22:55 schrieb Tonix (Antonio Nati): Also note that, if you send one mail to 50 recipients, this will result in 50 individual items in the queue. As long as but one of these items is still unsent, qmailctl queue will list all 50 items as still being in the queue but will indicate with each item if said item has been sent. Once all items belonging to the message have been sent, they'll all no longer be shown in the queue. Is that the behavior you see when saying some messages need a long time to send? If I send to 50 recipients on the same remote domain, I will have 50 connections opened to the same remote server... So, if remote server has limit on new connections, some deliveries will abort and retry nextly. Very true. You could use your number of concurrent connections more effectively when each was used to transmit more than one message. But of course this (if anyone actually were to rewrite the way qmail's queuing works) would only be a relief and eliminate the problem: Depending on the allowed chunk size (messages per session allowed for a given target domain) and the number of messages sent to that domain, you might still end up being 'tarpit'ed. But I guess the whole discussion is a moot point in so far as there is (afaik) no such patch for qmail in existence. Martin - Qmailtoaster is sponsored by Vickers Consulting Group ( www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com --
[qmailtoaster] Re: Dynamic IP rejection notices
Right. I use (and recommend) DynDNS's Mailhop Outbound service. It's very reliable, and quite affordable provided you don't do large mailing lists. http://www.dyndns.com/services/mailhop/outbound.html -- -Eric 'shubes' Amit wrote: Hi Mike, Use smarthost to relay your mail. That should solve your problem. Regards, Amit On Wed, Jul 7, 2010 at 1:04 PM, Mike Canty m...@collotype.com.au mailto:m...@collotype.com.au wrote: To all, I have just set up another (that makes 5) Qmail Toaster installations (I love this product), but this one is the first that has a dynamic IP. Apart for a few issues, which have been resolved, I am now getting rejections due to the Dynamic IP and Spam sites. What can I do to stop this. Please see the rejection message below. Hi. This is the qmail-send program at msrvprl.domainname.com http://msrvprl.domainname.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. i...@recipient.com mailto:i...@recipient.com.: User and password not set, continuing without authentication. 196.41.124.15 does not like recipient. Remote host said: 554 5.7.1 dsl-240-15-122.telkomadsl.co.za http://dsl-240-15-122.telkomadsl.co.za [41.240.15.122]: Client host rejected: ADSLDIRECT 27 you must relay your mail through your upstream provider if you are connected via an ADSL line with a dynamic ip Giving up on 196.41.124.15. Cheers - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com http://www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com http://qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com mailto:qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Qmail with LDAP
Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit
Re: [qmailtoaster] Qmail with LDAP
I guess you skipped the current vpopmail-toaster package and manually built vpopmail 5.5.0 from vpopmail source (inter7)? If so, you should be aware that manually compiling vpopmail will not tell the RPM based system that a package called vpopmail-toaster is installed on the system and therefore the build requirements for the qmail-toaster package fail. Martin Am 07.07.2010 um 19:13 schrieb Amit Dalia: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit -- I am fond of pigs. Dogs look up to us. Cats look down on us. Pigs treat us as equals. Winston Churchill
[qmailtoaster] Re: Qmail with LDAP
Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Qmail with LDAP
PS: What you can do is edit the .spec file for qmail-toaster package and remove 'vpopmail-toaster = 5.4.17' from the line that says Requires: some.other.package, vpopmail-toaster = 5.4.17 Martin Am 07.07.2010 um 19:13 schrieb Amit Dalia: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit -- The whole modern world has divided itself into Conservatives and Progressives. The business of Progressives is to go on making mistakes. The business of the Conservatives is to prevent the mistakes from being corrected. Gilbert K. Chesterton
Re: [qmailtoaster] Qmail with LDAP
Yes Martin I compiled it from source. This mean either I have to make a rpm file of vpopmail 5.5.0 or I have to configure complete qmail from source. Hmmm. :( Anyway thanks Martin. Regards, Amit At Wednesday, 07-07-2010 on 22:49 Martin Waschbuesch wrote: I guess you skipped the current vpopmail-toaster package and manually built vpopmail 5.5.0 from vpopmail source (inter7)? If so, you should be aware that manually compiling vpopmail will not tell the RPM based system that a package called vpopmail-toaster is installed on the system and therefore the build requirements for the qmail-toaster package fail. Martin Am 07.07.2010 um 19:13 schrieb Amit Dalia: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit -- I am fond of pigs. Dogs look up to us. Cats look down on us. Pigs treat us as equals. Winston Churchill
[qmailtoaster] Re: Qmail with LDAP
Hi Eric, Building vpopmail from spec file is good option but there are much changes need to be done as there are many changes made in vpopmail 5.5.0. Regards, Amit At Wednesday, 07-07-2010 on 22:50 Eric Shubert wrote: Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Qmail with LDAP
Does it have to be the development branch of vpopmail? I expect that using the stable branch (5.4.30 is the current version) would be easier to integrate with the existing vpopmail-toaster package... Martin Am 07.07.2010 um 19:26 schrieb Amit Dalia: Hi Eric, Building vpopmail from spec file is good option but there are much changes need to be done as there are many changes made in vpopmail 5.5.0. Regards, Amit At Wednesday, 07-07-2010 on 22:50 Eric Shubert wrote: Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- Corporation. An ingenious device for obtaining individual profit without individual responsibility. Bierce, Ambrose
Re: [qmailtoaster] Re: Qmail with LDAP
Very true. It's just that I could very quickly update the vpopmail-toaster package to 5.4.30. I would not want to touch 5.5.x though - as Amit pointed out, a lot of things changed... Am 07.07.2010 um 19:55 schrieb Eric Shubert: I expect that's true, but where's the fun in that?? ;) Seriously though, I'm glad to see someone trying the 5.5 branch. My understanding is that a) it has improvements in the LDAP area, and b) quotas are finally fixed. Martin Waschbuesch wrote: Does it have to be the development branch of vpopmail? I expect that using the stable branch (5.4.30 is the current version) would be easier to integrate with the existing vpopmail-toaster package... Martin Am 07.07.2010 um 19:26 schrieb Amit Dalia: Hi Eric, Building vpopmail from spec file is good option but there are much changes need to be done as there are many changes made in vpopmail 5.5.0. Regards, Amit At Wednesday, 07-07-2010 on 22:50 Eric Shubert wrote: Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com http://www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com http://qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com mailto:qmailtoaster-list-h...@qmailtoaster.com -- Corporation. An ingenious device for obtaining individual profit without individual responsibility. Bierce, Ambrose -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- If we don't believe in freedom of expression for people we despise, we don't believe in it at all. Noam Chomsky - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Qmail with LDAP
Amit, Modifying the spec file is really pretty easy once you get the hang of it. If you'd like, we can assist you with that. Please start a new thread on the devel list, and we'll go from there. -- -Eric 'shubes' Amit Dalia wrote: Hi Eric, Building vpopmail from spec file is good option but there are much changes need to be done as there are many changes made in vpopmail 5.5.0. Regards, Amit At Wednesday, 07-07-2010 on 22:50 Eric Shubert wrote: Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Qmail with LDAP
In the meantime I just updated the package to 5.4.30... ;-) Giving it a try as we speak - there seem to have been numerous patches since 5.4.17 (stock QMT)... Am 07.07.2010 um 19:56 schrieb Eric Shubert: Amit, Modifying the spec file is really pretty easy once you get the hang of it. If you'd like, we can assist you with that. Please start a new thread on the devel list, and we'll go from there. -- -Eric 'shubes' Amit Dalia wrote: Hi Eric, Building vpopmail from spec file is good option but there are much changes need to be done as there are many changes made in vpopmail 5.5.0. Regards, Amit At Wednesday, 07-07-2010 on 22:50 Eric Shubert wrote: Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- The whole modern world has divided itself into Conservatives and Progressives. The business of Progressives is to go on making mistakes. The business of the Conservatives is to prevent the mistakes from being corrected. Gilbert K. Chesterton - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Qmail with LDAP
IIRC, there are MySQL database changes required for that jump. I think I may have written a script to do that. Would you like me to check what I have on that? Martin Waschbuesch wrote: In the meantime I just updated the package to 5.4.30... ;-) Giving it a try as we speak - there seem to have been numerous patches since 5.4.17 (stock QMT)... Am 07.07.2010 um 19:56 schrieb Eric Shubert: Amit, Modifying the spec file is really pretty easy once you get the hang of it. If you'd like, we can assist you with that. Please start a new thread on the devel list, and we'll go from there. -- -Eric 'shubes' Amit Dalia wrote: Hi Eric, Building vpopmail from spec file is good option but there are much changes need to be done as there are many changes made in vpopmail 5.5.0. Regards, Amit At Wednesday, 07-07-2010 on 22:50 Eric Shubert wrote: Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- The whole modern world has divided itself into Conservatives and Progressives. The business of Progressives is to go on making mistakes. The business of the Conservatives is to prevent the mistakes from being corrected. Gilbert K. Chesterton - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: Qmail with LDAP
Yeah, but it's not simply a matter of going to 5.4.30. It's also a matter of switching from MySQL to LDAP for the backend. That's a big change (if not bigger) as well. Martin Waschbuesch wrote: Very true. It's just that I could very quickly update the vpopmail-toaster package to 5.4.30. I would not want to touch 5.5.x though - as Amit pointed out, a lot of things changed... Am 07.07.2010 um 19:55 schrieb Eric Shubert: I expect that's true, but where's the fun in that?? ;) Seriously though, I'm glad to see someone trying the 5.5 branch. My understanding is that a) it has improvements in the LDAP area, and b) quotas are finally fixed. Martin Waschbuesch wrote: Does it have to be the development branch of vpopmail? I expect that using the stable branch (5.4.30 is the current version) would be easier to integrate with the existing vpopmail-toaster package... Martin Am 07.07.2010 um 19:26 schrieb Amit Dalia: Hi Eric, Building vpopmail from spec file is good option but there are much changes need to be done as there are many changes made in vpopmail 5.5.0. Regards, Amit At Wednesday, 07-07-2010 on 22:50 Eric Shubert wrote: Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com http://www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com http://qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com mailto:qmailtoaster-list-h...@qmailtoaster.com -- Corporation. An ingenious device for obtaining individual profit without individual responsibility. Bierce, Ambrose -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- If we don't believe in freedom of expression for people we despise, we don't believe in it at all. Noam Chomsky - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
Re: [qmailtoaster] Re: Qmail with LDAP
That would be very good! :-) Thanks a lot, Martin Am 07.07.2010 um 20:22 schrieb Eric Shubert: IIRC, there are MySQL database changes required for that jump. I think I may have written a script to do that. Would you like me to check what I have on that? Martin Waschbuesch wrote: In the meantime I just updated the package to 5.4.30... ;-) Giving it a try as we speak - there seem to have been numerous patches since 5.4.17 (stock QMT)... Am 07.07.2010 um 19:56 schrieb Eric Shubert: Amit, Modifying the spec file is really pretty easy once you get the hang of it. If you'd like, we can assist you with that. Please start a new thread on the devel list, and we'll go from there. -- -Eric 'shubes' Amit Dalia wrote: Hi Eric, Building vpopmail from spec file is good option but there are much changes need to be done as there are many changes made in vpopmail 5.5.0. Regards, Amit At Wednesday, 07-07-2010 on 22:50 Eric Shubert wrote: Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- The whole modern world has divided itself into Conservatives and Progressives. The business of Progressives is to go on making mistakes. The business of the Conservatives is to prevent the mistakes from being corrected. Gilbert K. Chesterton - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- In everyone there sleeps A sense of life lived according to love. To some it means the difference they could make By loving others, but across most it sweeps As all they might have done had they been loved. That nothing cures. Philip Larkin 'Faith Healing' - Qmailtoaster
Re: [qmailtoaster] Re: Qmail with LDAP
Oh, I understand, but 5.4.x has some (albeit limited I understand) LDAP support and 5.4.30 seems to have some things backported from 5.5.0 to allow for *some* more interoperability. Of course, switching from mysql to ldap is a far bigger thing as far as I can tell. Martin Am 07.07.2010 um 20:24 schrieb Eric Shubert: Yeah, but it's not simply a matter of going to 5.4.30. It's also a matter of switching from MySQL to LDAP for the backend. That's a big change (if not bigger) as well. Martin Waschbuesch wrote: Very true. It's just that I could very quickly update the vpopmail-toaster package to 5.4.30. I would not want to touch 5.5.x though - as Amit pointed out, a lot of things changed... Am 07.07.2010 um 19:55 schrieb Eric Shubert: I expect that's true, but where's the fun in that?? ;) Seriously though, I'm glad to see someone trying the 5.5 branch. My understanding is that a) it has improvements in the LDAP area, and b) quotas are finally fixed. Martin Waschbuesch wrote: Does it have to be the development branch of vpopmail? I expect that using the stable branch (5.4.30 is the current version) would be easier to integrate with the existing vpopmail-toaster package... Martin Am 07.07.2010 um 19:26 schrieb Amit Dalia: Hi Eric, Building vpopmail from spec file is good option but there are much changes need to be done as there are many changes made in vpopmail 5.5.0. Regards, Amit At Wednesday, 07-07-2010 on 22:50 Eric Shubert wrote: Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com http://www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com http://qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com mailto:qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com mailto:qmailtoaster-list-h...@qmailtoaster.com -- Corporation. An ingenious device for obtaining individual profit without individual responsibility. Bierce, Ambrose -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- If we don't believe in freedom of expression for people we despise, we don't believe in it at all. Noam Chomsky - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help
[qmailtoaster] Re: Qmail with LDAP
All you need to do is run the qtp-convert script, which can be run from the command line. The conversion process is already in there. :) FWIW, qtp-newmodel runs the qtp-convert script automatically each time an upgrade is done. It's also run in the sandbox after all the packages are installed there, to be sure there aren't any problems. Martin Waschbuesch wrote: That would be very good! :-) Thanks a lot, Martin Am 07.07.2010 um 20:22 schrieb Eric Shubert: IIRC, there are MySQL database changes required for that jump. I think I may have written a script to do that. Would you like me to check what I have on that? Martin Waschbuesch wrote: In the meantime I just updated the package to 5.4.30... ;-) Giving it a try as we speak - there seem to have been numerous patches since 5.4.17 (stock QMT)... Am 07.07.2010 um 19:56 schrieb Eric Shubert: Amit, Modifying the spec file is really pretty easy once you get the hang of it. If you'd like, we can assist you with that. Please start a new thread on the devel list, and we'll go from there. -- -Eric 'shubes' Amit Dalia wrote: Hi Eric, Building vpopmail from spec file is good option but there are much changes need to be done as there are many changes made in vpopmail 5.5.0. Regards, Amit At Wednesday, 07-07-2010 on 22:50 Eric Shubert wrote: Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- The whole modern world has divided itself into Conservatives and Progressives. The business of Progressives is to go on making mistakes. The business of the Conservatives is to prevent the mistakes from being corrected. Gilbert K. Chesterton - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- In everyone there sleeps A sense of life lived according to love. To some it means the
[qmailtoaster] Re: Qmail with LDAP
Hi Eric/Martin, Sorry was gone out. Anyway some changes in vpopmail 5.5.0 is like make compiling option are replaced like --enable-user is replaced by --with-user. Most important --enable-auth-module is no more used. They had started with backend module now, means now we need to compile first with backend module which ever we required and then compile the vpopmail. And I'm beginner to LINUX world so don't know much, so surely will need your all help. Regards, Amit At Thursday, 08-07-2010 on 0:28 Eric Shubert wrote: All you need to do is run the qtp-convert script, which can be run from the command line. The conversion process is already in there. :) FWIW, qtp-newmodel runs the qtp-convert script automatically each time an upgrade is done. It's also run in the sandbox after all the packages are installed there, to be sure there aren't any problems. Martin Waschbuesch wrote: That would be very good! :-) Thanks a lot, Martin Am 07.07.2010 um 20:22 schrieb Eric Shubert: IIRC, there are MySQL database changes required for that jump. I think I may have written a script to do that. Would you like me to check what I have on that? Martin Waschbuesch wrote: In the meantime I just updated the package to 5.4.30... ;-) Giving it a try as we speak - there seem to have been numerous patches since 5.4.17 (stock QMT)... Am 07.07.2010 um 19:56 schrieb Eric Shubert: Amit, Modifying the spec file is really pretty easy once you get the hang of it. If you'd like, we can assist you with that. Please start a new thread on the devel list, and we'll go from there. -- -Eric 'shubes' Amit Dalia wrote: Hi Eric, Building vpopmail from spec file is good option but there are much changes need to be done as there are many changes made in vpopmail 5.5.0. Regards, Amit At Wednesday, 07-07-2010 on 22:50 Eric Shubert wrote: Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- The whole modern world has divided itself into Conservatives and Progressives. The business of Progressives is to go on making mistakes. The business of the Conservatives is to prevent the mistakes from being corrected. Gilbert K. Chesterton - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional
[qmailtoaster] Re: Qmail with LDAP
Anyway this is my development server where I'm trying Qmail + LDAP + Dovecot + Amavisd At Thursday, 08-07-2010 on 0:28 Eric Shubert wrote: All you need to do is run the qtp-convert script, which can be run from the command line. The conversion process is already in there. :) FWIW, qtp-newmodel runs the qtp-convert script automatically each time an upgrade is done. It's also run in the sandbox after all the packages are installed there, to be sure there aren't any problems. Martin Waschbuesch wrote: That would be very good! :-) Thanks a lot, Martin Am 07.07.2010 um 20:22 schrieb Eric Shubert: IIRC, there are MySQL database changes required for that jump. I think I may have written a script to do that. Would you like me to check what I have on that? Martin Waschbuesch wrote: In the meantime I just updated the package to 5.4.30... ;-) Giving it a try as we speak - there seem to have been numerous patches since 5.4.17 (stock QMT)... Am 07.07.2010 um 19:56 schrieb Eric Shubert: Amit, Modifying the spec file is really pretty easy once you get the hang of it. If you'd like, we can assist you with that. Please start a new thread on the devel list, and we'll go from there. -- -Eric 'shubes' Amit Dalia wrote: Hi Eric, Building vpopmail from spec file is good option but there are much changes need to be done as there are many changes made in vpopmail 5.5.0. Regards, Amit At Wednesday, 07-07-2010 on 22:50 Eric Shubert wrote: Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- The whole modern world has divided itself into Conservatives and Progressives. The business of Progressives is to go on making mistakes. The business of the Conservatives is to prevent the mistakes from being corrected. Gilbert K. Chesterton - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- In everyone there sleeps A
[qmailtoaster] Re: Qmail with LDAP
Very good, Amit. Strike up a thread on the qmail-devel list, and we'll continue there. We need to discuss how (if?) we're going to have an LDAP option with vpopmail-toaster. Personally, I'd love to see it, and will be glad to help out. Amit Dalia wrote: Anyway this is my development server where I'm trying Qmail + LDAP + Dovecot + Amavisd At Thursday, 08-07-2010 on 0:28 Eric Shubert wrote: All you need to do is run the qtp-convert script, which can be run from the command line. The conversion process is already in there. :) FWIW, qtp-newmodel runs the qtp-convert script automatically each time an upgrade is done. It's also run in the sandbox after all the packages are installed there, to be sure there aren't any problems. Martin Waschbuesch wrote: That would be very good! :-) Thanks a lot, Martin Am 07.07.2010 um 20:22 schrieb Eric Shubert: IIRC, there are MySQL database changes required for that jump. I think I may have written a script to do that. Would you like me to check what I have on that? Martin Waschbuesch wrote: In the meantime I just updated the package to 5.4.30... ;-) Giving it a try as we speak - there seem to have been numerous patches since 5.4.17 (stock QMT)... Am 07.07.2010 um 19:56 schrieb Eric Shubert: Amit, Modifying the spec file is really pretty easy once you get the hang of it. If you'd like, we can assist you with that. Please start a new thread on the devel list, and we'll go from there. -- -Eric 'shubes' Amit Dalia wrote: Hi Eric, Building vpopmail from spec file is good option but there are much changes need to be done as there are many changes made in vpopmail 5.5.0. Regards, Amit At Wednesday, 07-07-2010 on 22:50 Eric Shubert wrote: Amit Dalia wrote: Hi everyone, I was just trying to install qmail with LDAP support and beta version of vpopmail 5.5.0. I had successfully compiled and install vpopmail but stuck while installing qmail-toaster package. Getting below error: Installing qmail-toaster-1.03-1.3.20.src.rpm warning: user shubes does not exist - using root warning: group shubes does not exist - using root error: Failed build dependencies: vpopmail-toaster = 5.4.17 is needed by qmail-toaster-1.03-1.3.20.i386 error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-toaster*.rpm error: File not found by glob: /usr/src/redhat/RPMS/i386/qmail-pop3d*.rpm Any help? I had already compiled and installed vpopmail. Regards, Amit It'd be best to modify the vpopmail-toaster.spec file to build and install the 5.5 version. If you're just building and installing vpopmail manually (prototype/test sort of thing), it'd be easiest to simply edit the qmail-toaster.spec file and remove/comment the vpopmail dependency. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com -- The whole modern world has divided itself into Conservatives and Progressives. The business of Progressives is to go on making mistakes. The business of the Conservatives is to prevent the mistakes from being corrected. Gilbert K. Chesterton - Qmailtoaster is sponsored by Vickers Consulting Group
Re: [qmailtoaster] Re: spam email routing query
hi eric when the email arrives in the spam box its headers contained the delivered to email id in the header so my script will know where to which email id the message is to be delivered. so my concern about bcc is resolved. my second question is as such which would be better Simply move the email from the centralized spambox to the inbox of that email id Or use the qmail-queue program to reroute the message back to the queue for delivery. i don't want the email time stamps changed during this process. thanks rajesh Rajesh M wrote: Rajesh M wrote: hi the current system is such that all the emails that are spam (ie between 5 and 8) get tagged as spam in subject line and are are routed to the SPAM folder which can be viewed via squirrelmail my questions 1) is it possible to route these to a common mailbox which will be monitored by a system admin 2) if the mail is genuine spam then the it is left as it is 3) if the email has been wrongly classified then the administrator will move the email to another folder say notspam and then it will be delivered to the recepient's inbox rajesh - Anything's possible. ;) This could be done I suppose. It sounds to me like you're talking about a centralized spambox. I'd look into the current spambox capability and see how to tweak it to do 1). 3) will take a bit of doing, but not much. A script could be written which would pipe emails in the notspam folder to the qmail-queue program for delivery, and remove them from the notspam folder. Personally, I'm not fond of the idea. Sounds to me like you're creating work for a sysadmin, which would be more appropriately done by the end user. I suppose it might be appropriate depending on your environment though. -- -Eric 'shubes' - hi thanks for the input how would such a script handle bcc ? rajesh - I'm not positive, but I think that bcc is no longer in play at that point, so there would be nothing to handle. Unless I'm misunderstanding your question. Please describe a scenario, and we can hash it out. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
[qmailtoaster] Re: spam email routing query
Rajesh M wrote: hi eric when the email arrives in the spam box its headers contained the delivered to email id in the header so my script will know where to which email id the message is to be delivered. so my concern about bcc is resolved. my second question is as such which would be better Define better. ;) Simply move the email from the centralized spambox to the inbox of that email id Or use the qmail-queue program to reroute the message back to the queue for delivery. As usual, there's more than one way. i don't want the email time stamps changed during this process. Which time stamps are you referring to? On further thinking about this, I wouldn't do either. If you have dovecot installed, I would use dovecot's deliver program. Otherwise, I'd use the maildrop program. You should realize though that at some point dovecot's lda (deliver) is likely going to replace maildrop. With either program, I don't expect you'd need to do any parsing of the message in your script - just pass it on to the lda. I could be wrong about this though. You could move the file to the appropriate inbox yourself and I believe that would work, but using the lda would be 'better'. The lda really should know what's going into the mailbox, for indexing and quota purposes. -- -Eric 'shubes' - Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! - Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
