Re: [qmailtoaster] rcpthosts file

2007-05-02 Thread 

This mail server that I'm configuring must be a replica of the existing one who 
has the following settings that I don't know how to set up on the new one:



1.Only one table company_com in vpopmail db. No company_net or company_gr



2.Only company.com domain in /home/vpopmail/domains/



3.Contents of virtualdomains are 



company.gr:company.gr 

company.com:company.com 

company.net:company.net



4.Contents of assign file are



+company.com-:company.com:200:200:/home/vpopmail/domains/company.com:-:: 

+company.gr-:company.com:200:200:/home/vpopmail/domains/company.com:-:: 

+company.net-:company.com:200:200:/home/vpopmail/domains/company.com:-::



With this settings I can: 

A. send from outside the company (yahoo,google...) messages to its users 



B. All the users mail is received directly in the only existing company_com 
domain in the :/home/vpopmail/domains/company.com folder even if they are send 
to [EMAIL PROTECTED] or [EMAIL PROTECTED]



All this is what I'm trying to replicate right now.



___
Join Excite! - http://www.excite.com
The most personalized portal on the Web!



-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] rcpthosts file

2007-05-02 Thread 





Ok, 



I corrected that message. It was the company_gr and company_net tables in 
vpopmail database that were still there...I drop them and now I created the 
domain.com normally.



This was for the .com, but now how should I create the other virtual domains to 
be alias of .com? 



The server full qualified name is mailhost2.company.com and not .net so I guess 
the alias is needed here if I want to use company.net users...



Marcos







 --- On Wed 05/02,  < [EMAIL PROTECTED] > wrote:

From:  [mailto: [EMAIL PROTECTED]

To: qmailtoaster-list@qmailtoaster.com

Date: Wed,  2 May 2007 10:23:37 -0400 (EDT)

Subject: Re: [qmailtoaster] rcpthosts fileIf



My installation is QMT. I downloaded every last package from 
qmailtoaster.com and installed it but I have no tested yet vqadmin.I 
removed the virtual domains, reboot and then tried to create the first one 
again but I had this extrange message that I hadn't the previous time:# 
/home/vpopmail/bin/vadddomain company.com passwordEntry is out of order: 
company.com.mailhost2What is this now?Marcos --- On 
Wed 05/02, Benedict Claver < [EMAIL PROTECTED] > wrote:From: Benedict 
Claver [mailto: [EMAIL PROTECTED]To: 
qmailtoaster-list@qmailtoaster.comDate: Wed, 2 May 2007 17:00:12 
+0300Subject: Re: [qmailtoaster] rcpthosts fileIfIf your 
installation is QMT, you can use the web interfaceto do all that 
configuration, add or delete domain and users as well.Have you tested 
that?. I hope you have Vqadmin-Toaster as one of installed 
packages.BennyOn Wednesday 02 
May 2007 12:53:10, Craig Smith wrote:> Basically, all I did on mine is what 
you have done.>> vadddomain -r domain.com   (-r random 
password)>> That's all that you need to do, then>> vadduser -r 
[EMAIL PROTECTED]>> and send mail to that user.>> If it fails 
and causes problems at this point, then qmail installation may> be corrupt 
or it has something to do with FC6, but only uninstalling QMT> and then 
starting QMT over will help you with that.  I can say on FC5 the> above 
steps work fine.  QMT takes care of the assign, rcpthosts,> virtualdomain 
etc entries.>>>> -Original Message-> From: [EMAIL 
PROTECTED] [mailto:[EMAIL PROTECTED]> Sent: 02 May 2007 14:56> To: 
qmailtoaster-list@qmailtoaster.com> Subject: RE: [qmailtoaster] rcpthosts 
file>>>  Ok,  let's asume I delete the domains and start creating 
them again. How> should I create the first, let's say default 
(.com), domain? I created all> of them (.com,.net,.gr) before with 
vadddomain...  Warren: I'd like to> check Centos but I really have no time 
to go back and start from> scratch.The only solution right now is to go on 
with fedora core 6 and see> if I can make it. Marcos   --- On Wed 
05/02, Craig Smith <> [EMAIL PROTECTED] > wrote: From: Craig Smith [mailto: 
[EMAIL PROTECTED]> To:> qmailtoaster-list@qmailtoaster.com Date: Wed, 2 
May 2007 14:35:05 +0100> Subject: RE: [qmailtoaster] rcpthosts file  On my 
set up I never modified> the assign file at all it was all done 
byqmail.  It is possible that> something in the assign file is 
incorrect, orfile permissions/ownership> have changed in which case 
it may be the cause ofthe problem, but it's> hard to say.It 
sounds like it might be easier, to uninstall qmail> and start 
fromscratch.  Get the one domain working fine first, then add> the 
virtual 
oralias domains in one at a time testing each as you go> along.  Only 
modifyfiles that you really need to and leave the rest up> to 
qmail. -Original Message-From:> [EMAIL 
PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 02 May 2007> 14:32To: 
qmailtoaster-list@qmailtoaster.comSubject: RE:> [qmailtoaster] 
rcpthosts fileBenedict: I think if I remove the> rcpthosts file 
the server will act as anopen relay, right? Which is> somethinng I 
don't want to do, of course:-)(Correct me if I'm wrong)> Craig,  When I 
tried> to remove the vdomains withvdeldomain I have this message:  
#> /home/vpopmail/bin/vdeldomain company.comWarning: Alias domains 
exist:> company.grcompany.netuse -f toforce delete of domain 
and all> aliases  This remembers me that I hadmodified manually 
the> /var/qmail/users/assign file like> 
this:+company.com-:company.com:89:89:/home/vpopmail/domains/company.com>:>
 
-::+company.gr-:company.com:89:89:/home/vpopmail/domains/company.com:-:>:
 
+company.net-:company.com:89:89:/home/vpopmail/domains/company.com:-::> 
Ithought I did this in order to have all users assigned to a single> 
.comdomain but I don't think this would be the reason of the problem> 
right?Marcos --- On Wed 05/02, Benedict Claver <> [EMAIL 
PROTECTED]>> > wrote:From: Benedict Claver [mailto: [EMAIL 
PROTECTED]>> To:qmailtoaster-list@qmailtoaster.com Date: Wed, 2

RE: [qmailtoaster] rcpthosts file

2007-05-02 Thread Craig Smith 
Basically, all I did on mine is what you have done.

vadddomain -r domain.com   (-r random password)

That's all that you need to do, then

vadduser -r [EMAIL PROTECTED] 

and send mail to that user.

If it fails and causes problems at this point, then qmail installation may
be corrupt or it has something to do with FC6, but only uninstalling QMT and
then starting QMT over will help you with that.  I can say on FC5 the above
steps work fine.  QMT takes care of the assign, rcpthosts, virtualdomain etc
entries.



-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
Sent: 02 May 2007 14:56
To: qmailtoaster-list@qmailtoaster.com
Subject: RE: [qmailtoaster] rcpthosts file


 Ok,  let's asume I delete the domains and start creating them again. How
should I create the first, let's say default (.com), domain? I created all
of them (.com,.net,.gr) before with vadddomain...  Warren: I'd like to check
Centos but I really have no time to go back and start from scratch.The only
solution right now is to go on with fedora core 6 and see if I can make it.
Marcos   --- On Wed 05/02, Craig Smith < [EMAIL PROTECTED] > wrote:
From: Craig Smith [mailto: [EMAIL PROTECTED] To:
qmailtoaster-list@qmailtoaster.com Date: Wed, 2 May 2007 14:35:05 +0100
Subject: RE: [qmailtoaster] rcpthosts file  On my set up I never modified
the assign file at all it was all done byqmail.  It is possible that
something in the assign file is incorrect, orfile permissions/ownership
have changed in which case it may be the cause ofthe problem, but it's
hard to say.It sounds like it might be easier, to uninstall qmail
and start fromscratch.  Get the one domain working fine first, then add
the virtual oralias domains in one at a time testing each as you go
along.  Only modifyfiles that you really need to and leave the rest up
to qmail. -Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 02 May 2007
14:32To: qmailtoaster-list@qmailtoaster.comSubject: RE:
[qmailtoaster] rcpthosts fileBenedict: I think if I remove the
rcpthosts file the server will act as anopen relay, right? Which is
somethinng I don't want to do, of course:-)(Correct me if I'm wrong)
Craig,  When I tried 
to remove the vdomains withvdeldomain I have this message:  #
/home/vpopmail/bin/vdeldomain company.comWarning: Alias domains exist:
company.grcompany.netuse -f toforce delete of domain and all
aliases  This remembers me that I hadmodified manually the
/var/qmail/users/assign file like
this:+company.com-:company.com:89:89:/home/vpopmail/domains/company.com:
-::+company.gr-:company.com:89:89:/home/vpopmail/domains/company.com:-::
+company.net-:company.com:89:89:/home/vpopmail/domains/company.com:-::
Ithought I did this in order to have all users assigned to a single
.comdomain but I don't think this would be the reason of the problem
right?Marcos --- On Wed 05/02, Benedict Claver < [EMAIL PROTECTED]
> wrote:From: Benedict Claver [mailto: [EMAIL PROTECTED]
To:qmailtoaster-list@qmailtoaster.com Date: Wed, 2 May 2007 06:07:57
-0700(PDT) Subject: RE: [qmailtoaster] rcpthosts file  Hi 
Mark,Somethingseems not to be happening correctly as
wasexpected for the rcpthostsfile, though I have not
yetestablished. As a temporary solutionto that you can
remove orrename the rcpthost file eg rcpthost.bak andyou willbe
able to send and receive from any domain.
Itworkedhere.Regards,Benny---
<[EMAIL PROTECTED]>wrote:> > > Hi Craig,> > I
send the messages fromthis account on the> internet,
[EMAIL PROTECTED], to my companymail> server.> > The other
message I receive from the mailserver is> this:> > Hi. This
is the qmail-send program at>mailhost2.adacom.com. > I'm afraid
I wasn't able to deliver your messageto> the following addresses.
> This is a permanent error; I've givenup. Sorry it> didn't work
out.> > <[EMAIL PROTECTED]>:> Sorry. Although I'm
listed as a 
best-preference MX> or A for thathost, > it isn't in my
control/locals file, so I don't treat> it as local.(#5.4.6)>
> > I checked the /control/locals file and I hadthe>
following:> > [EMAIL PROTECTED] control]# cat
locals>localhost> mailhost2.company.com> > Since I'm
using virtualdomains and the account I> try to reach is
[EMAIL PROTECTED] I added thisnew> entry with .net hoping this would
solve the problem:> >[EMAIL PROTECTED] control]# cat locals>
localhost>mailhost2.adacom.com> mailhost2.adacom.net> >
> I triedagain but had exactly the same error message> again
> > I have alook at the /var/log/qmail/smtp/current and>
found this:> >@400046387ccf33b718fc CHKUSER accepted
sender:> from<[EMAIL PROTECTED]::> remote>
 rcpt<> : sender> accepted> 
@400046387ccf33c71aa4 CHKUSER acceptedrcp

RE: [qmailtoaster] rcpthosts file

2007-05-02 Thread 



Ok, 

let's asume I delete the domains and start creating them again.

How should I create the first, let's say default (.com), domain? I created all 
of them (.com,.net,.gr) before with vadddomain...



Warren: I'd like to check Centos but I really have no time to go back and start 
from scratch.The only solution right now is to go on with fedora core 6 and see 
if I can make it.



Marcos











 --- On Wed 05/02, Craig Smith < [EMAIL PROTECTED] > wrote:

From: Craig Smith [mailto: [EMAIL PROTECTED]

To: qmailtoaster-list@qmailtoaster.com

Date: Wed, 2 May 2007 14:35:05 +0100

Subject: RE: [qmailtoaster] rcpthosts file



On my set up I never modified the assign file at all it was all done 
byqmail.  It is possible that something in the assign file is incorrect, 
orfile permissions/ownership have changed in which case it may be the cause 
ofthe problem, but it's hard to say.It sounds like it might be 
easier, to uninstall qmail and start fromscratch.  Get the one domain 
working fine first, then add the virtual oralias domains in one at a time 
testing each as you go along.  Only modifyfiles that you really need to and 
leave the rest up to qmail. -Original 
Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 02 
May 2007 14:32To: qmailtoaster-list@qmailtoaster.comSubject: RE: 
[qmailtoaster] rcpthosts fileBenedict: I think if I remove the 
rcpthosts file the server will act as anopen relay, right? Which is 
somethinng I don't want to do, of course:-)(Correct me if I'm wrong)  
Craig,  When I tried 
to remove the vdomains withvdeldomain I have this message:  # 
/home/vpopmail/bin/vdeldomain company.comWarning: Alias domains exist:
company.grcompany.netuse -f toforce delete of domain and all 
aliases  This remembers me that I hadmodified manually the 
/var/qmail/users/assign file like 
this:+company.com-:company.com:89:89:/home/vpopmail/domains/company.com:-::+company.gr-:company.com:89:89:/home/vpopmail/domains/company.com:-::+company.net-:company.com:89:89:/home/vpopmail/domains/company.com:-::
   Ithought I did this in order to have all users assigned to a single 
.comdomain but I don't think this would be the reason of the problem 
right?Marcos --- On Wed 05/02, Benedict Claver < [EMAIL PROTECTED] > 
wrote:From: Benedict Claver [mailto: [EMAIL PROTECTED] 
To:qmailtoaster-list@qmailtoaster.com Date: Wed, 2 May 2007 06:07:57 
-0700(PDT) Subject: RE: [qmailtoaster] rcpthosts file  Hi 
Mark,Somethingseems not to be happening correctly as 
wasexpected for the rcpthostsfile, though I have not 
yetestablished. As a temporary solutionto that you can remove 
orrename the rcpthost file eg rcpthost.bak andyou willbe able to 
send and receive from any domain. 
Itworkedhere.Regards,Benny---  <[EMAIL 
PROTECTED]>wrote:> > > Hi Craig,> > I send the 
messages fromthis account on the> internet, [EMAIL PROTECTED], to my 
companymail> server.> > The other message I receive from the 
mailserver is> this:> > Hi. This is the qmail-send program 
at>mailhost2.adacom.com. > I'm afraid I wasn't able to deliver your 
messageto> the following addresses. > This is a permanent error; 
I've givenup. Sorry it> didn't work out.> > <[EMAIL 
PROTECTED]>:> Sorry. Although I'm listed as a 
best-preference MX> or A for thathost, > it isn't in my 
control/locals file, so I don't treat> it as local.(#5.4.6)> > 
> I checked the /control/locals file and I hadthe> following:> 
> [EMAIL PROTECTED] control]# cat locals>localhost> 
mailhost2.company.com> > Since I'm using virtualdomains and the 
account I> try to reach is [EMAIL PROTECTED] I added thisnew> entry 
with .net hoping this would solve the problem:> >[EMAIL PROTECTED] 
control]# cat locals> localhost>mailhost2.adacom.com> 
mailhost2.adacom.net> > > I triedagain but had exactly the same 
error message> again > > I have alook at the 
/var/log/qmail/smtp/current and> found this:> 
>@400046387ccf33b718fc CHKUSER accepted sender:> 
from<[EMAIL PROTECTED]::> remote>  
rcpt<> : sender> accepted> 
@400046387ccf33c71aa4 CHKUSER acceptedrcpt:> from <[EMAIL 
PROTECTED]::> remote>  rcpt> 
<[EMAIL PROTECTED]> :found existing> recipient> 
@400046387cd00757c4b4simscan:[3709]:CLEAN>(3.30/12.00):0.2489s:test:207.159.120.62:mark0s@excite.com:[EMAIL
 PROTECTED]:> @400046387cd00a5aeeactcpserver: end 3709 status> 
0> @400046387cd00a5b40b4 tcpserver:status: 0/100> > > 
Nothing more...> > What do youthink?> > Marcos> >  
--- On Wed 05/02, Craig Smith <[EMAIL PROTECTED] >> wrote:> From: 
Craig Smith [mailto:[EMAIL PROTECTED]> To: 
qmailtoaster-list@qmailtoaster.com> Date:Wed, 2 May 2007 12:43:03 
+0

RE: [qmailtoaster] rcpthosts file

2007-05-02 Thread Craig Smith 
fyi assign file rights on my system (fc5)

-rw-r--r-- 1 root root  7714 Mar 23 15:07 assign
-rw--- 1 root root 0 Mar 23 15:07 assign.lock
-rw-r--r-- 1 root root 11591 Mar 23 15:07 cdb
 

-Original Message-
From: Benedict Claver [mailto:[EMAIL PROTECTED] 
Sent: 02 May 2007 14:52
To: qmailtoaster-list@qmailtoaster.com
Subject: RE: [qmailtoaster] rcpthosts file

You are right Mark,

I wonder in my installation i didn't edit permissions
on assign or any other file but i had that same
problem
on CentOS 4.4

Benny

--- Craig Smith <[EMAIL PROTECTED]> wrote:

> On my set up I never modified the assign file at all
> it was all done by
> qmail.  It is possible that something in the assign
> file is incorrect, or
> file permissions/ownership have changed in which
> case it may be the cause of
> the problem, but it's hard to say.
> 
> It sounds like it might be easier, to uninstall
> qmail and start from
> scratch.  Get the one domain working fine first,
> then add the virtual or
> alias domains in one at a time testing each as you
> go along.  Only modify
> files that you really need to and leave the rest up
> to qmail.
> 
> 
>  
> 
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
> Sent: 02 May 2007 14:32
> To: qmailtoaster-list@qmailtoaster.com
> Subject: RE: [qmailtoaster] rcpthosts file
> 
> 
> Benedict: I think if I remove the rcpthosts file the
> server will act as an
> open relay, right? Which is somethinng I don't want
> to do, of course:-)
> (Correct me if I'm wrong)  Craig,  When I tried to
> remove the vdomains with
> vdeldomain I have this message:  #
> /home/vpopmail/bin/vdeldomain company.com
> Warning: Alias domains exist:company.gr   
> company.netuse -f to
> force delete of domain and all aliases  This
> remembers me that I had
> modified manually the /var/qmail/users/assign file
> like this:
>
+company.com-:company.com:89:89:/home/vpopmail/domains/company.com:-::
>
+company.gr-:company.com:89:89:/home/vpopmail/domains/company.com:-::
>
+company.net-:company.com:89:89:/home/vpopmail/domains/company.com:-::
>   I
> thought I did this in order to have all users
> assigned to a single .com
> domain but I don't think this would be the reason of
> the problem right?
> Marcos --- On Wed 05/02, Benedict Claver <
> [EMAIL PROTECTED] > wrote:
> From: Benedict Claver [mailto: [EMAIL PROTECTED]
> To:
> qmailtoaster-list@qmailtoaster.com Date: Wed, 2 May
> 2007 06:07:57 -0700
> (PDT) Subject: RE: [qmailtoaster] rcpthosts file  Hi
> Mark,Something
> seems not to be happening correctly as
> wasexpected for the rcpthosts
> file, though I have not yetestablished.
> As a temporary solution
> to that you can remove orrename the rcpthost
> file eg rcpthost.bak and
> you willbe able to send and receive from any
> domain. It
>
workedhere.Regards,Benny---
>  <[EMAIL PROTECTED]>
> wrote:> > > Hi Craig,> > I
> send the messages from
> this account on the> internet,
> [EMAIL PROTECTED], to my company
> mail> server.> > The other message I
> receive from the mail
> server is> this:> > Hi. This is the
> qmail-send program at>
> mailhost2.adacom.com. > I'm afraid I wasn't able
> to deliver your message
> to> the following addresses. > This is a
> permanent error; I've given
> up. Sorry it> didn't work out.> >
> <[EMAIL PROTECTED]>:
> > Sorry. Although I'm listed as a
> best-preference MX> or A for that
> host, 
> > it isn't in my control/locals file, so I don't
> treat> it as local.
> (#5.4.6)> > > I checked the
> /control/locals file and I had
> the> following:> > [EMAIL PROTECTED]
> control]# cat locals>
> localhost> mailhost2.company.com> >
> Since I'm using virtual
> domains and the account I> try to reach is
> [EMAIL PROTECTED] I added this
> new> entry with .net hoping this would solve the
> problem:> >
> [EMAIL PROTECTED] control]# cat locals>
> localhost>
> mailhost2.adacom.com> mailhost2.adacom.net>
> > > I tried
> again but had exactly the same error message>
> again > > I have a
> look at the /var/log/qmail/smtp/current and>
> found this:> >
> @400046387ccf33b718fc CHKUSER accepted
> sender:> from
> <[EMAIL PROTECTED]::> remote>
>  rcpt
> <> : sender> accepted>
> @400046387ccf33c71aa4 CHKUSER accepted
> rcpt:> from <[EMAIL PROTECTED]::> remote> 
>  rcpt>
> <[EMAIL PROTECTED]> :
> found existing> recipient>
> @400046387cd00

RE: [qmailtoaster] rcpthosts file

2007-05-02 Thread Benedict Claver 
You are right Mark,

I wonder in my installation i didn't edit permissions
on assign or any other file but i had that same
problem
on CentOS 4.4

Benny

--- Craig Smith <[EMAIL PROTECTED]> wrote:

> On my set up I never modified the assign file at all
> it was all done by
> qmail.  It is possible that something in the assign
> file is incorrect, or
> file permissions/ownership have changed in which
> case it may be the cause of
> the problem, but it's hard to say.
> 
> It sounds like it might be easier, to uninstall
> qmail and start from
> scratch.  Get the one domain working fine first,
> then add the virtual or
> alias domains in one at a time testing each as you
> go along.  Only modify
> files that you really need to and leave the rest up
> to qmail.
> 
> 
>  
> 
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
> Sent: 02 May 2007 14:32
> To: qmailtoaster-list@qmailtoaster.com
> Subject: RE: [qmailtoaster] rcpthosts file
> 
> 
> Benedict: I think if I remove the rcpthosts file the
> server will act as an
> open relay, right? Which is somethinng I don't want
> to do, of course:-)
> (Correct me if I'm wrong)  Craig,  When I tried to
> remove the vdomains with
> vdeldomain I have this message:  #
> /home/vpopmail/bin/vdeldomain company.com
> Warning: Alias domains exist:company.gr   
> company.netuse -f to
> force delete of domain and all aliases  This
> remembers me that I had
> modified manually the /var/qmail/users/assign file
> like this:
>
+company.com-:company.com:89:89:/home/vpopmail/domains/company.com:-::
>
+company.gr-:company.com:89:89:/home/vpopmail/domains/company.com:-::
>
+company.net-:company.com:89:89:/home/vpopmail/domains/company.com:-::
>   I
> thought I did this in order to have all users
> assigned to a single .com
> domain but I don't think this would be the reason of
> the problem right?
> Marcos --- On Wed 05/02, Benedict Claver <
> [EMAIL PROTECTED] > wrote:
> From: Benedict Claver [mailto: [EMAIL PROTECTED]
> To:
> qmailtoaster-list@qmailtoaster.com Date: Wed, 2 May
> 2007 06:07:57 -0700
> (PDT) Subject: RE: [qmailtoaster] rcpthosts file  Hi
> Mark,Something
> seems not to be happening correctly as
> wasexpected for the rcpthosts
> file, though I have not yetestablished.
> As a temporary solution
> to that you can remove orrename the rcpthost
> file eg rcpthost.bak and
> you willbe able to send and receive from any
> domain. It
>
workedhere.Regards,Benny---
>  <[EMAIL PROTECTED]>
> wrote:> > > Hi Craig,> > I
> send the messages from
> this account on the> internet,
> [EMAIL PROTECTED], to my company
> mail> server.> > The other message I
> receive from the mail
> server is> this:> > Hi. This is the
> qmail-send program at>
> mailhost2.adacom.com. > I'm afraid I wasn't able
> to deliver your message
> to> the following addresses. > This is a
> permanent error; I've given
> up. Sorry it> didn't work out.> >
> <[EMAIL PROTECTED]>:
> > Sorry. Although I'm listed as a
> best-preference MX> or A for that
> host, 
> > it isn't in my control/locals file, so I don't
> treat> it as local.
> (#5.4.6)> > > I checked the
> /control/locals file and I had
> the> following:> > [EMAIL PROTECTED]
> control]# cat locals>
> localhost> mailhost2.company.com> >
> Since I'm using virtual
> domains and the account I> try to reach is
> [EMAIL PROTECTED] I added this
> new> entry with .net hoping this would solve the
> problem:> >
> [EMAIL PROTECTED] control]# cat locals>
> localhost>
> mailhost2.adacom.com> mailhost2.adacom.net>
> > > I tried
> again but had exactly the same error message>
> again > > I have a
> look at the /var/log/qmail/smtp/current and>
> found this:> >
> @400046387ccf33b718fc CHKUSER accepted
> sender:> from
> <[EMAIL PROTECTED]::> remote>
>  rcpt
> <> : sender> accepted>
> @400046387ccf33c71aa4 CHKUSER accepted
> rcpt:> from <[EMAIL PROTECTED]::> remote> 
>  rcpt>
> <[EMAIL PROTECTED]> :
> found existing> recipient>
> @400046387cd00757c4b4
>
simscan:[3709]:CLEAN>(3.30/12.00):0.2489s:test:207.159.120.62:mark0s
> @excite.com:[EMAIL PROTECTED]:>
> @400046387cd00a5aeeac
> tcpserver: end 3709 status> 0>
> @400046387cd00a5b40b4 tcpserver:
> status: 0/100> > > Nothing more...>
> > What do you
> think?> > Marcos> >  --- On Wed
> 05/0

Re: [qmailtoaster] rcpthosts file

2007-05-02 Thread Warren (mailing lists) 

Craig Smith wrote:

On my set up I never modified the assign file at all it was all done by
qmail.  It is possible that something in the assign file is incorrect, or
file permissions/ownership have changed in which case it may be the 
cause of

the problem, but it's hard to say.

It sounds like it might be easier, to uninstall qmail and start from
scratch.  Get the one domain working fine first, then add the virtual or
alias domains in one at a time testing each as you go along.  Only modify
files that you really need to and leave the rest up to qmail.


Also, if you do decide to start over (I know, time constraints, but
sometimes it is easier and quicker to start over), use Centos 4.  More of
us are using that than any other distro so any problems will be easier to
hunt down and for us to help out with.

W

-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] rcpthosts file

2007-05-02 Thread Warren (mailing lists) 

Craig Smith wrote:

On my set up I never modified the assign file at all it was all done by
qmail.  It is possible that something in the assign file is incorrect, or
file permissions/ownership have changed in which case it may be the cause of
the problem, but it's hard to say.

It sounds like it might be easier, to uninstall qmail and start from
scratch.  Get the one domain working fine first, then add the virtual or
alias domains in one at a time testing each as you go along.  Only modify
files that you really need to and leave the rest up to qmail.


Here are the permissions for all of the files in my control directory 
for reference:


-rw-r--r--  1 root   qmail   32 Apr 26 09:02 badloadertypes
-rw-r--r--  1 root   root  2048 Apr 26 09:03 badloadertypes.cdb
-rw-r--r--  1 root   qmail   19 Apr 26 09:02 badmailfrom
-rw-r--r--  1 root   qmail   29 Apr 26 09:02 badmailto
-rw-r--r--  1 root   qmail  328 Apr 26 09:02 badmimetypes
-rw-r--r--  1 root   root  2576 Apr 26 09:03 badmimetypes.cdb
-rw-r--r--  1 root   root18 Apr 26 09:02 blacklists
-rw-r--r--  1 root   qmail   66 Apr 26 09:02 blacklists-hold
lrwxrwxrwx  1 root   root14 Apr 26 09:02 clientcert.pem -> 
servercert.pem

-rw-r--r--  1 root   qmail3 Apr 26 09:02 concurrencyincoming
-rw-r--r--  1 root   qmail3 Apr 26 09:02 concurrencyremote
-rw-r--r--  1 root   qmail   10 Apr 26 09:02 databytes
-rw-r--r--  1 root   qmail   10 Apr 26 09:02 defaultdelivery
-rw-r--r--  1 root   qmail   12 Apr 26 09:02 defaultdomain
-rw-r--r--  1 root   qmail   12 Apr 26 09:02 defaulthost
-rw-r--r--  1 root   qmail  245 May  2 01:02 dh1024.pem
-rw-r--r--  1 root   qmail  156 May  2 01:01 dh512.pem
drwxr-xr-x  2 root   qmail 4096 Jan 12 08:49 domainkeys
-rw-r--r--  1 root   root   132 Apr 26 09:02 locals
-rw---  1 root   root 0 Apr 26 09:02 locals.lock
-rw-r--r--  1 root   qmail4 Apr 26 09:02 logcount
-rw-r--r--  1 root   qmail9 Apr 26 09:02 logsize
-rw-r--r--  1 root   qmail   20 Apr 26 09:02 me
-rw-r--r--  1 root   root 2 Apr 26 09:02 mfcheck
-rw-r--r--  1 root   qmail   12 Apr 26 09:02 plusdomain
-rw-r--r--  1 root   qmail6 Apr 26 09:02 queuelifetime
-rw-r--r--  1 root   root   279 Apr 26 09:02 rcpthosts
-rw---  1 root   root 0 Apr 26 09:02 rcpthosts.lock
-rw-r--r--  1 root   qmail  497 May  2 01:01 rsa512.pem
-rw-r--r--  1 root   qmail 2112 Apr 26 09:02 servercert.pem
-rw-r--r--  1 clamav root54 Apr 26 09:02 simcontrol
-rw-r--r--  1 root   root  2124 Apr 26 09:03 simcontrol.cdb
-rw-r--r--  1 root   root  2168 Apr 26 09:03 simversions.cdb
-rw-r--r--  1 root   qmail   43 Apr 26 09:02 smtpgreeting
-rw-r--r--  1 root   root99 Apr 26 09:02 smtproutes
-rw-r--r--  1 root   root27 Apr 26 09:02 spamt
-rw-r--r--  1 root   root  2096 Apr 26 09:02 spamt.cdb
-rw-r--r--  1 root   qmail2 Apr 26 09:02 spfbehavior
-rw-r--r--  1 root   qmail  447 Apr 26 09:02 ssattach
lrwxrwxrwx  1 root   root35 Apr 26 09:02 tlsclientciphers -> 
/var/qmail/control/tlsserverciphers

-rw-r--r--  1 root   qmail  751 Apr 26 09:02 tlsserverciphers
-rw-r--r--  1 root   root   250 Apr 26 09:02 virtualdomains
-rw---  1 root   root 0 Apr 26 09:02 virtualdomains.lock


Regards,
W

-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: [qmailtoaster] rcpthosts file

2007-05-02 Thread Craig Smith 
On my set up I never modified the assign file at all it was all done by
qmail.  It is possible that something in the assign file is incorrect, or
file permissions/ownership have changed in which case it may be the cause of
the problem, but it's hard to say.

It sounds like it might be easier, to uninstall qmail and start from
scratch.  Get the one domain working fine first, then add the virtual or
alias domains in one at a time testing each as you go along.  Only modify
files that you really need to and leave the rest up to qmail.


 

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
Sent: 02 May 2007 14:32
To: qmailtoaster-list@qmailtoaster.com
Subject: RE: [qmailtoaster] rcpthosts file


Benedict: I think if I remove the rcpthosts file the server will act as an
open relay, right? Which is somethinng I don't want to do, of course:-)
(Correct me if I'm wrong)  Craig,  When I tried to remove the vdomains with
vdeldomain I have this message:  # /home/vpopmail/bin/vdeldomain company.com
Warning: Alias domains exist:company.grcompany.netuse -f to
force delete of domain and all aliases  This remembers me that I had
modified manually the /var/qmail/users/assign file like this:
+company.com-:company.com:89:89:/home/vpopmail/domains/company.com:-::
+company.gr-:company.com:89:89:/home/vpopmail/domains/company.com:-::
+company.net-:company.com:89:89:/home/vpopmail/domains/company.com:-::   I
thought I did this in order to have all users assigned to a single .com
domain but I don't think this would be the reason of the problem right?
Marcos --- On Wed 05/02, Benedict Claver < [EMAIL PROTECTED] > wrote:
From: Benedict Claver [mailto: [EMAIL PROTECTED] To:
qmailtoaster-list@qmailtoaster.com Date: Wed, 2 May 2007 06:07:57 -0700
(PDT) Subject: RE: [qmailtoaster] rcpthosts file  Hi Mark,Something
seems not to be happening correctly as wasexpected for the rcpthosts
file, though I have not yetestablished. As a temporary solution
to that you can remove orrename the rcpthost file eg rcpthost.bak and
you willbe able to send and receive from any domain. It
workedhere.Regards,Benny---  <[EMAIL PROTECTED]>
wrote:> > > Hi Craig,> > I send the messages from
this account on the> internet, [EMAIL PROTECTED], to my company
mail> server.> > The other message I receive from the mail
server is> this:> > Hi. This is the qmail-send program at>
mailhost2.adacom.com. > I'm afraid I wasn't able to deliver your message
to> the following addresses. > This is a permanent error; I've given
up. Sorry it> didn't work out.> > <[EMAIL PROTECTED]>:
> Sorry. Although I'm listed as a best-preference MX> or A for that
host, 
> it isn't in my control/locals file, so I don't treat> it as local.
(#5.4.6)> > > I checked the /control/locals file and I had
the> following:> > [EMAIL PROTECTED] control]# cat locals>
localhost> mailhost2.company.com> > Since I'm using virtual
domains and the account I> try to reach is [EMAIL PROTECTED] I added this
new> entry with .net hoping this would solve the problem:> >
[EMAIL PROTECTED] control]# cat locals> localhost>
mailhost2.adacom.com> mailhost2.adacom.net> > > I tried
again but had exactly the same error message> again > > I have a
look at the /var/log/qmail/smtp/current and> found this:> >
@400046387ccf33b718fc CHKUSER accepted sender:> from
<[EMAIL PROTECTED]::> remote>  rcpt
<> : sender> accepted> @400046387ccf33c71aa4 CHKUSER accepted
rcpt:> from <[EMAIL PROTECTED]::> remote> 
 rcpt> <[EMAIL PROTECTED]> :
found existing> recipient> @400046387cd00757c4b4
simscan:[3709]:CLEAN>(3.30/12.00):0.2489s:test:207.159.120.62:mark0s
@excite.com:[EMAIL PROTECTED]:> @400046387cd00a5aeeac
tcpserver: end 3709 status> 0> @400046387cd00a5b40b4 tcpserver:
status: 0/100> > > Nothing more...> > What do you
think?> > Marcos> >  --- On Wed 05/02, Craig Smith <
[EMAIL PROTECTED] >> wrote:> From: Craig Smith [mailto:
[EMAIL PROTECTED]> To: qmailtoaster-list@qmailtoaster.com> Date:
Wed, 2 May 2007 12:43:03 +0100> Subject: RE: [qmailtoaster] rcpthosts
file> > It's probably the client side with the problem.  The>
ip's in the tcp.smtpfile are the ip's outside> the company that you
want to allow to relay> mailthrough your server.I'm assuming
the> problem is as follows.External 
Client A> from outside has email configured to relay through>
yourserver, so in Outlook outgoing smtp server => your mail
server.However client a's ip> address is not in tcp.smtp and
they are not using> smtpserver with authentication.I'm
not> entirely sure, but I think that's roughly the> probl

RE: [qmailtoaster] rcpthosts file

2007-05-02 Thread 

Benedict: I think if I remove the rcpthosts file the server will act as an open 
relay, right? Which is somethinng I don't want to do, of course:-) (Correct me 
if I'm wrong)



Craig,



When I tried to remove the vdomains with vdeldomain I have this message:



# /home/vpopmail/bin/vdeldomain company.com

Warning: Alias domains exist:

   company.gr

   company.net

   use -f to force delete of domain and all aliases



This remembers me that I had modified manually the /var/qmail/users/assign file 
like this:



+company.com-:company.com:89:89:/home/vpopmail/domains/company.com:-::

+company.gr-:company.com:89:89:/home/vpopmail/domains/company.com:-::

+company.net-:company.com:89:89:/home/vpopmail/domains/company.com:-::





I thought I did this in order to have all users assigned to a single .com 
domain but I don't think this would be the reason of the problem right?



Marcos







 --- On Wed 05/02, Benedict Claver < [EMAIL PROTECTED] > wrote:

From: Benedict Claver [mailto: [EMAIL PROTECTED]

To: qmailtoaster-list@qmailtoaster.com

Date: Wed, 2 May 2007 06:07:57 -0700 (PDT)

Subject: RE: [qmailtoaster] rcpthosts file



Hi Mark,Something seems not to be happening correctly as 
wasexpected for the rcpthosts file, though I have not yetestablished. 
As a temporary solution to that you can remove orrename the 
rcpthost file eg rcpthost.bak and you willbe able to send and receive from 
any domain. It workedhere.Regards,Benny---  <[EMAIL 
PROTECTED]> wrote:> > > Hi Craig,> > I send the 
messages from this account on the> internet, [EMAIL PROTECTED], to my 
company mail> server.> > The other message I receive from the mail 
server is> this:> > Hi. This is the qmail-send program at> 
mailhost2.adacom.com. > I'm afraid I wasn't able to deliver your message 
to> the following addresses. > This is a permanent error; I've given 
up. Sorry it> didn't work out.> > <[EMAIL PROTECTED]>: > Sorry. 
Although I'm listed as a best-preference MX> or A for that host, 
> it isn't in my control/locals file, so I don't treat> it as local. 
(#5.4.6)> > > I checked the /control/locals file and I had the> 
following:> > [EMAIL PROTECTED] control]# cat locals> 
localhost> mailhost2.company.com> > Since I'm using virtual domains 
and the account I> try to reach is [EMAIL PROTECTED] I added this new> 
entry with .net hoping this would solve the problem:> > [EMAIL 
PROTECTED] control]# cat locals> localhost> mailhost2.adacom.com> 
mailhost2.adacom.net> > > I tried again but had exactly the same 
error message> again > > I have a look at the 
/var/log/qmail/smtp/current and> found this:> > 
@400046387ccf33b718fc CHKUSER accepted sender:> from <[EMAIL 
PROTECTED]::> remote>  rcpt <> : 
sender> accepted> @400046387ccf33c71aa4 CHKUSER accepted rcpt:> 
from <[EMAIL PROTECTED]::> remote> 
 rcpt> <[EMAIL PROTECTED]> : found 
existing> recipient> @400046387cd00757c4b4 
simscan:[3709]:CLEAN>(3.30/12.00):0.2489s:test:207.159.120.62:[EMAIL 
PROTECTED]:[EMAIL PROTECTED]:> @400046387cd00a5aeeac tcpserver: end 
3709 status> 0> @400046387cd00a5b40b4 tcpserver: status: 0/100> 
> > Nothing more...> > What do you think?> > 
Marcos> >  --- On Wed 05/02, Craig Smith < [EMAIL PROTECTED] >> 
wrote:> From: Craig Smith [mailto: [EMAIL PROTECTED]> To: 
qmailtoaster-list@qmailtoaster.com> Date: Wed, 2 May 2007 12:43:03 
+0100> Subject: RE: [qmailtoaster] rcpthosts file> > It's probably 
the client side with the problem.  The> ip's in the tcp.smtpfile are 
the ip's outside> the company that you want to allow to relay> 
mailthrough your server.I'm assuming the> problem is as 
follows.External 
Client A> from outside has email configured to relay through> 
yourserver, so in Outlook outgoing smtp server => your mail 
server.However client a's ip> address is not in tcp.smtp and they 
are not using> smtpserver with authentication.I'm not> 
entirely sure, but I think that's roughly the> problem you arerunning 
into.do you get> the same error when you email from say hotmail? 
> What is theexact bounce message?Also> what do the logs 
files say at the time mail is> sent?tail 
/var/log/maillogtail> 
/var/log/qmail/smtp/current-Original> Message-From: 
[EMAIL PROTECTED]> [mailto:[EMAIL PROTECTED] Sent: 02 May 2007> 
11:32To:> qmailtoaster-list@qmailtoaster.comSubject: > RE: 
[qmailtoaster] rcpthosts fileHi,  I> have all the company IPs 
in tcp.smtp and it looks to> work fine butthe problem is from 
outside the> company.  I use authentication for> this[EMAIL 
PROTECTED] user with  > /hom

Re: [qmailtoaster] rcpthosts file

2007-05-02 Thread Benedict Claver 
Hi warren,

I had installed it on CentOS 4.4, and had experienced
the same problem till I removed the rcpthost file then
it worked. Using webmin they is an option of not using

the rctphost file. Though it should have worked with
all localdomains enlisted in the rcpthost as done by
Mark.

Benny 



--- "Warren (mailing lists)"
<[EMAIL PROTECTED]> wrote:

> Marcos,
> 
> Given that this is a new installation, might I
> suggest that before you 
> go any further you start from scratch using Centos 4
> instead of Fedora 
> 6.  Fedora is a cutting-edge product, whereas Centos
> is built for 
> stability.  In a mail server you are more likely
> looking for stability 
> than for cutting edge.
> 
> Regards,
> Warren
> 
> [EMAIL PROTECTED] wrote:
> > Hello,
> > 
> > I'm using qmail toaster with fedora 6.
> > 
> > I have configured POP3 and IMAP for my company
> mail server and I'm doing the first tests right now.
> 
> > 
> > When I send an email from a company account with
> same domain to the [EMAIL PROTECTED] account I've created
> with the same company domain it receives these
> emails from POP3 account and IMAP account.
> > 
> > When I send an email from [EMAIL PROTECTED], IMAP
> and POP3, to an outside email like [EMAIL PROTECTED]
> again it is a success.
> > 
> > The problem starts when I try to send email from
> outside to this [EMAIL PROTECTED] account, IMAP or
> POP3. I receive the following email in Outlook
> express client when trying to send:
> > 
> > 'Server Response: 553, sorry that domain isn't in
> my list of allowed rcpthosts (#5.5.3 - chkuser)'
> > 
> > The contents of my rcpthosts file are:
> > 
> > mail-server.company.com
> > company.com
> > company.net
> > 
> > 
> > I understand that one can not enter in the
> rcphosts file EVERY domain in this world so what
> should be the solution to this problem?
> > 
> > Any help?
> > 
> > Marcos
> > 
> > 
> > ___
> > Join Excite! - http://www.excite.com
> > The most personalized portal on the Web!
> > 
> > 
> > 
> >
>
-
> >  QmailToaster hosted by: VR Hosted
> 
> >
>
-
> > To unsubscribe, e-mail:
> [EMAIL PROTECTED]
> > For additional commands, e-mail:
> [EMAIL PROTECTED]
> > 
> 
> 
>
-
>  QmailToaster hosted by: VR Hosted
> 
>
-
> To unsubscribe, e-mail:
> [EMAIL PROTECTED]
> For additional commands, e-mail:
> [EMAIL PROTECTED]
> 
> 


__
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: [qmailtoaster] rcpthosts file

2007-05-02 Thread Benedict Claver 
Hi Mark,

Something seems not to be happening correctly as was
expected for the rcpthosts file, though I have not yet
established. 

As a temporary solution to that you can remove or
rename the rcpthost file eg rcpthost.bak and you will
be able to send and receive from any domain. It worked
here.

Regards,
Benny


---  <[EMAIL PROTECTED]> wrote:

> 
> 
> Hi Craig,
> 
> I send the messages from this account on the
> internet, [EMAIL PROTECTED], to my company mail
> server.
> 
> The other message I receive from the mail server is
> this:
> 
> Hi. This is the qmail-send program at
> mailhost2.adacom.com. 
> I'm afraid I wasn't able to deliver your message to
> the following addresses. 
> This is a permanent error; I've given up. Sorry it
> didn't work out.
> 
> <[EMAIL PROTECTED]>: 
> Sorry. Although I'm listed as a best-preference MX
> or A for that host, 
> it isn't in my control/locals file, so I don't treat
> it as local. (#5.4.6)
> 
> 
> I checked the /control/locals file and I had the
> following:
> 
> [EMAIL PROTECTED] control]# cat locals
> localhost
> mailhost2.company.com
> 
> Since I'm using virtual domains and the account I
> try to reach is [EMAIL PROTECTED] I added this new
> entry with .net hoping this would solve the problem:
> 
> [EMAIL PROTECTED] control]# cat locals
> localhost
> mailhost2.adacom.com
> mailhost2.adacom.net
> 
> 
> I tried again but had exactly the same error message
> again 
> 
> I have a look at the /var/log/qmail/smtp/current and
> found this:
> 
> @400046387ccf33b718fc CHKUSER accepted sender:
> from <[EMAIL PROTECTED]::> remote
>  rcpt <> : sender
> accepted
> @400046387ccf33c71aa4 CHKUSER accepted rcpt:
> from <[EMAIL PROTECTED]::> remote
>  rcpt
> <[EMAIL PROTECTED]> : found existing
> recipient
> @400046387cd00757c4b4 simscan:[3709]:CLEAN
>
(3.30/12.00):0.2489s:test:207.159.120.62:[EMAIL PROTECTED]:[EMAIL PROTECTED]:
> @400046387cd00a5aeeac tcpserver: end 3709 status
> 0
> @400046387cd00a5b40b4 tcpserver: status: 0/100
> 
> 
> Nothing more...
> 
> What do you think?
> 
> Marcos
> 
>  --- On Wed 05/02, Craig Smith < [EMAIL PROTECTED] >
> wrote:
> From: Craig Smith [mailto: [EMAIL PROTECTED]
> To: qmailtoaster-list@qmailtoaster.com
> Date: Wed, 2 May 2007 12:43:03 +0100
> Subject: RE: [qmailtoaster] rcpthosts file
> 
> It's probably the client side with the problem.  The
> ip's in the tcp.smtpfile are the ip's outside
> the company that you want to allow to relay
> mailthrough your server.I'm assuming the
> problem is as follows.External Client A
> from outside has email configured to relay through
> yourserver, so in Outlook outgoing smtp server =
> your mail server.However client a's ip
> address is not in tcp.smtp and they are not using
> smtpserver with authentication.I'm not
> entirely sure, but I think that's roughly the
> problem you arerunning into.do you get
> the same error when you email from say hotmail? 
> What is theexact bounce message?Also
> what do the logs files say at the time mail is
> sent?tail /var/log/maillogtail
> /var/log/qmail/smtp/current-Original
> Message-From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Sent: 02 May 2007
> 11:32To:
> qmailtoaster-list@qmailtoaster.comSubject: 
> RE: [qmailtoaster] rcpthosts fileHi,  I
> have all the company IPs in tcp.smtp and it looks to
> work fine butthe problem is from outside the
> company.  I use authentication for
> this[EMAIL PROTECTED] user with  
> /home/vpopmail/bin/vchkpw 
> on/var/qmail/supervise/smtp/run and
> /var/qmail/supervise/pop3/run.   This userexists
> in the vpopmail database so I guess it is there
> where the vchkpwprogram looks when it needs to
> authenticate a user connecting from
> outside.Right? If this is right why I can not
> connect yet?  Marcos --- On Wed05/02, Craig
> Smith < [EMAIL PROTECTED] > wrote: From: Craig Smith
> [mailto:[EMAIL PROTECTED] To:
> qmailtoaster-list@qmailtoaster.com Date: Wed, 2
> May2007 11:08:05 +0100 Subject: RE:
> [qmailtoaster] rcpthosts file 
> HiThere,Are they by any chance using
> your server as the outgoing smtpserver? 
> I'vehad that error crop up, when an unauthorized
> user is usingour server forthe outgoing 
> server.  They either need to useauthenticated
> login or theirip needs to be added to the
> tcp.smtp file ifthis is the case.
> -Original
> Message-From:[EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Sent: 02 May
> 200709:52To:
> qmailtoaster-list@qmailtoaster.comSubject:
> [qmailt

RE: [qmailtoaster] rcpthosts file

2007-05-02 Thread Craig Smith 
Have you tried vdeldomain and then rectreate it?  It all looks ok, but
obviously there is something not working as it should.  Try deleteting the
domains and recreating them if you can.  What happens with the newly created
domain?   

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
Sent: 02 May 2007 13:49
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] rcpthosts file


 Warren: It is too late to change. I'm running out of time to set this new
mail server and I have no time to test new platforms but thanks for the
suggestion anyway.  Craig: The contents of the control/virtualdomains file
are  company.com:company.com company.gr:company.gr company.net:company.net
As you can see the .net is already there and the problem too...  Marcos
--- On Wed 05/02, Warren (mailing lists) < [EMAIL PROTECTED] > wrote:
From: Warren (mailing lists) [mailto: [EMAIL PROTECTED] To:
qmailtoaster-list@qmailtoaster.com Date: Wed, 02 May 2007 08:40:43 -0400
Subject: Re: [qmailtoaster] rcpthosts file  Marcos,Given that this
is a new installation, might I suggest that before you go any further
you start from scratch using Centos 4 instead of Fedora 6.  Fedora is a
cutting-edge product, whereas Centos is built for stability.  In a mail
server you are more likely looking for stability than for cutting
edge.Regards,Warren[EMAIL PROTECTED] wrote:>
Hello,> > I'm using qmail toaster with fedora 6.> > I have
configured POP3 and IMAP for my company mail server and I'm doing the first
tests right now. > > When I send an email from a company account
with same domain to the [EMAIL PROTECTED] account I've created with the same
company domain it receives these emails from POP3 account and IMAP
account.> > When I send an email from [EMAIL PROTECTED], IMAP and
POP3, to an outside email like [EMAIL PROTECTED] again it is a success.>
> The problem starts when I try to send email from outside to this 
[EMAIL PROTECTED] account, IMAP or POP3. I receive the following email in
Outlook express client when trying to send:> > 'Server Response:
553, sorry that domain isn't in my list of allowed rcpthosts (#5.5.3 -
chkuser)'> > The contents of my rcpthosts file are:> >
mail-server.company.com> company.com> company.net> > > I
understand that one can not enter in the rcphosts file EVERY domain in this
world so what should be the solution to this problem?> > Any
help?> > Marcos> > >
___> Join Excite! -
http://www.excite.com> The most personalized portal on the Web!>
> > >
->
QmailToaster hosted by: VR Hosted <http://www.vr.org>>
->
To unsubscribe, e-mail: 
[EMAIL PROTECTED]> For additional commands,
e-mail: [EMAIL PROTECTED]>

- QmailToaster hosted by: VR Hosted
<http://www.vr.org>-
To unsubscribe, e-mail:
[EMAIL PROTECTED]For additional commands,
e-mail: [EMAIL PROTECTED]

___
Join Excite! - http://www.excite.com
The most personalized portal on the Web!



-
 QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]



-
 QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] rcpthosts file

2007-05-02 Thread 



Warren: It is too late to change. I'm running out of time to set this new mail 
server and I have no time to test new platforms but thanks for the suggestion 
anyway.



Craig: The contents of the control/virtualdomains file are



company.com:company.com

company.gr:company.gr

company.net:company.net



As you can see the .net is already there and the problem too...



Marcos







 --- On Wed 05/02, Warren (mailing lists) < [EMAIL PROTECTED] > wrote:

From: Warren (mailing lists) [mailto: [EMAIL PROTECTED]

To: qmailtoaster-list@qmailtoaster.com

Date: Wed, 02 May 2007 08:40:43 -0400

Subject: Re: [qmailtoaster] rcpthosts file



Marcos,Given that this is a new installation, might I suggest that 
before you go any further you start from scratch using Centos 4 instead of 
Fedora 6.  Fedora is a cutting-edge product, whereas Centos is built for 
stability.  In a mail server you are more likely looking for stability 
than for cutting edge.Regards,Warren[EMAIL PROTECTED] 
wrote:> Hello,> > I'm using qmail toaster with fedora 6.> > 
I have configured POP3 and IMAP for my company mail server and I'm doing the 
first tests right now. > > When I send an email from a company account 
with same domain to the [EMAIL PROTECTED] account I've created with the same 
company domain it receives these emails from POP3 account and IMAP 
account.> > When I send an email from [EMAIL PROTECTED], IMAP and POP3, 
to an outside email like [EMAIL PROTECTED] again it is a success.> > 
The problem starts when I try to send email from outside to this 
[EMAIL PROTECTED] account, IMAP or POP3. I receive the following email in 
Outlook express client when trying to send:> > 'Server Response: 553, 
sorry that domain isn't in my list of allowed rcpthosts (#5.5.3 - 
chkuser)'> > The contents of my rcpthosts file are:> > 
mail-server.company.com> company.com> company.net> > > I 
understand that one can not enter in the rcphosts file EVERY domain in this 
world so what should be the solution to this problem?> > Any help?> 
> Marcos> > > 
___> Join Excite! - 
http://www.excite.com> The most personalized portal on the Web!> > 
> > 
->  
QmailToaster hosted by: VR Hosted <http://www.vr.org>> 
-> To 
unsubscribe, e-mail: 
[EMAIL PROTECTED]> For additional commands, e-mail: [EMAIL PROTECTED]> 
-
 QmailToaster hosted by: VR Hosted 
<http://www.vr.org>-To
 unsubscribe, e-mail: [EMAIL PROTECTED]For additional commands, e-mail: 
[EMAIL PROTECTED]

___
Join Excite! - http://www.excite.com
The most personalized portal on the Web!



-
 QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Re: [qmailtoaster] rcpthosts file

2007-05-02 Thread Warren (mailing lists) 

Marcos,

Given that this is a new installation, might I suggest that before you 
go any further you start from scratch using Centos 4 instead of Fedora 
6.  Fedora is a cutting-edge product, whereas Centos is built for 
stability.  In a mail server you are more likely looking for stability 
than for cutting edge.


Regards,
Warren

[EMAIL PROTECTED] wrote:

Hello,

I'm using qmail toaster with fedora 6.

I have configured POP3 and IMAP for my company mail server and I'm doing the first tests right now. 


When I send an email from a company account with same domain to the [EMAIL 
PROTECTED] account I've created with the same company domain it receives these 
emails from POP3 account and IMAP account.

When I send an email from [EMAIL PROTECTED], IMAP and POP3, to an outside email 
like [EMAIL PROTECTED] again it is a success.

The problem starts when I try to send email from outside to this [EMAIL 
PROTECTED] account, IMAP or POP3. I receive the following email in Outlook 
express client when trying to send:

'Server Response: 553, sorry that domain isn't in my list of allowed rcpthosts 
(#5.5.3 - chkuser)'

The contents of my rcpthosts file are:

mail-server.company.com
company.com
company.net


I understand that one can not enter in the rcphosts file EVERY domain in this 
world so what should be the solution to this problem?

Any help?

Marcos


___
Join Excite! - http://www.excite.com
The most personalized portal on the Web!



-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]




-
QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: [qmailtoaster] rcpthosts file

2007-05-02 Thread Craig Smith 
What have you got listed in the /control/virtualdomains file?  This will
list all the domains that you have configured on the server. If the .net
domain is not listed in there, then it may not be configured correctly.   

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
Sent: 02 May 2007 13:13
To: qmailtoaster-list@qmailtoaster.com
Subject: RE: [qmailtoaster] rcpthosts file


 Hi Craig,  I send the messages from this account on the internet,
[EMAIL PROTECTED], to my company mail server.  The other message I receive
from the mail server is this:  Hi. This is the qmail-send program at
mailhost2.adacom.com.  I'm afraid I wasn't able to deliver your message to
the following addresses.  This is a permanent error; I've given up. Sorry it
didn't work out.  <[EMAIL PROTECTED]>:  Sorry. Although I'm listed
as a best-preference MX or A for that host,  it isn't in my control/locals
file, so I don't treat it as local. (#5.4.6)   I checked the /control/locals
file and I had the following:  [EMAIL PROTECTED] control]# cat locals
localhost mailhost2.company.com  Since I'm using virtual domains and the
account I try to reach is [EMAIL PROTECTED] I added this new entry with .net
hoping this would solve the problem:  [EMAIL PROTECTED] control]# cat locals
localhost mailhost2.adacom.com mailhost2.adacom.net   I tried again but had
exactly the same error message again   I have a look at the
/var/log/qmail/smtp/current and found this:  @400046387ccf33b718fc
CHKUSER accepted sender: from <[EMAIL PROTECTED]::> remote
 rcpt <> : sender accepted
@400046387ccf33c71aa4 CHKUSER accepted rcpt: from <[EMAIL PROTECTED]::>
remote  rcpt <[EMAIL PROTECTED]>
: found existing recipient @400046387cd00757c4b4 simscan:[3709]:CLEAN
(3.30/12.00):0.2489s:test:207.159.120.62:[EMAIL PROTECTED]:[EMAIL PROTECTED]
mpany.net: @400046387cd00a5aeeac tcpserver: end 3709 status 0
@400046387cd00a5b40b4 tcpserver: status: 0/100   Nothing more...  What
do you think?  Marcos   --- On Wed 05/02, Craig Smith < [EMAIL PROTECTED] >
wrote: From: Craig Smith [mailto: [EMAIL PROTECTED] To:
qmailtoaster-list@qmailtoaster.com Date: Wed, 2 May 2007 12:43:03 +0100
Subject: RE: [qmailtoaster] rcpthosts file  It's probably the client side
with the problem.  The ip's in the tcp.smtpfile are the ip's outside the
company that you want to allow to relay mailthrough your
server.I'm assuming the problem is as follows.External
Client A from outside has email configured to relay through yourserver,
so in Outlook outgoing smtp server = your mail server.However client
a's ip address is not in tcp.smtp and they are not using smtpserver with
authentication.I'm not entirely sure, but I think that's roughly the
problem you arerunning into.do you get the same error when you
email from say hotmail?  What is theexact bounce message?Also
what do the logs files say at the time mail is sent?tail
/var/log/maillogtail
/var/log/qmail/smtp/current-Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 02 May 2007
11:32To: qmailtoaster-list@qmailtoaster.comSubject: 
RE: [qmailtoaster] rcpthosts fileHi,  I have all the company IPs
in tcp.smtp and it looks to work fine butthe problem is from outside the
company.  I use authentication for this[EMAIL PROTECTED] user with
/home/vpopmail/bin/vchkpw  on/var/qmail/supervise/smtp/run and
/var/qmail/supervise/pop3/run.   This userexists in the vpopmail
database so I guess it is there where the vchkpwprogram looks when it
needs to authenticate a user connecting from outside.Right? If this is
right why I can not connect yet?  Marcos --- On Wed05/02, Craig
Smith < [EMAIL PROTECTED] > wrote: From: Craig Smith
[mailto:[EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Date:
Wed, 2 May2007 11:08:05 +0100 Subject: RE: [qmailtoaster] rcpthosts file
HiThere,Are they by any chance using your server as the outgoing
smtpserver?  I'vehad that error crop up, when an unauthorized user
is usingour server forthe outgoing 
server.  They either need to useauthenticated login or theirip needs
to be added to the tcp.smtp file ifthis is the case.
-Original Message-From:[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Sent: 02 May 200709:52To:
qmailtoaster-list@qmailtoaster.comSubject: [qmailtoaster]rcpthosts
fileHello,  I'm using qmail toaster with fedora 6.  Ihave
configured POP3 andIMAP for my company mail server and I'm doingthe
first tests right now.When I send an email from a company
accountwith same domain to the[EMAIL PROTECTED] account I've created 
with
the samecompany domain it receivesthese emails from POP3 account and
IMAPaccount.  When I send an email from[EMAIL PROTECTED], IMAP and
POP3, toan outside email like [EMAIL PROTECTED]again it is a
success.  The problem starts when I tryto send email fromoutside to
this [EMAIL PROTECTED] account

RE: [qmailtoaster] rcpthosts file

2007-05-02 Thread 



Hi Craig,



I send the messages from this account on the internet, [EMAIL PROTECTED], to my 
company mail server.



The other message I receive from the mail server is this:



Hi. This is the qmail-send program at mailhost2.adacom.com. 

I'm afraid I wasn't able to deliver your message to the following addresses. 

This is a permanent error; I've given up. Sorry it didn't work out.



<[EMAIL PROTECTED]>: 

Sorry. Although I'm listed as a best-preference MX or A for that host, 

it isn't in my control/locals file, so I don't treat it as local. (#5.4.6)





I checked the /control/locals file and I had the following:



[EMAIL PROTECTED] control]# cat locals

localhost

mailhost2.company.com



Since I'm using virtual domains and the account I try to reach is [EMAIL 
PROTECTED] I added this new entry with .net hoping this would solve the problem:



[EMAIL PROTECTED] control]# cat locals

localhost

mailhost2.adacom.com

mailhost2.adacom.net





I tried again but had exactly the same error message again 



I have a look at the /var/log/qmail/smtp/current and found this:



@400046387ccf33b718fc CHKUSER accepted sender: from <[EMAIL PROTECTED]::> 
remote  rcpt <> : sender accepted

@400046387ccf33c71aa4 CHKUSER accepted rcpt: from <[EMAIL PROTECTED]::> 
remote  rcpt <[EMAIL PROTECTED]> : found 
existing recipient

@400046387cd00757c4b4 simscan:[3709]:CLEAN 
(3.30/12.00):0.2489s:test:207.159.120.62:[EMAIL PROTECTED]:[EMAIL PROTECTED]:

@400046387cd00a5aeeac tcpserver: end 3709 status 0

@400046387cd00a5b40b4 tcpserver: status: 0/100





Nothing more...



What do you think?



Marcos



 --- On Wed 05/02, Craig Smith < [EMAIL PROTECTED] > wrote:

From: Craig Smith [mailto: [EMAIL PROTECTED]

To: qmailtoaster-list@qmailtoaster.com

Date: Wed, 2 May 2007 12:43:03 +0100

Subject: RE: [qmailtoaster] rcpthosts file



It's probably the client side with the problem.  The ip's in the 
tcp.smtpfile are the ip's outside the company that you want to allow to 
relay mailthrough your server.I'm assuming the problem is as 
follows.External Client A from outside has email configured to 
relay through yourserver, so in Outlook outgoing smtp server = your mail 
server.However client a's ip address is not in tcp.smtp and they are 
not using smtpserver with authentication.I'm not entirely sure, but 
I think that's roughly the problem you arerunning into.do you get 
the same error when you email from say hotmail?  What is theexact bounce 
message?Also what do the logs files say at the time mail is 
sent?tail /var/log/maillogtail 
/var/log/qmail/smtp/current-Original Message-From: 
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 02 May 2007 11:32To: 
qmailtoaster-list@qmailtoaster.comSubject: 
RE: [qmailtoaster] rcpthosts fileHi,  I have all the company IPs in 
tcp.smtp and it looks to work fine butthe problem is from outside the 
company.  I use authentication for this[EMAIL PROTECTED] user with   
/home/vpopmail/bin/vchkpw  on/var/qmail/supervise/smtp/run and 
/var/qmail/supervise/pop3/run.   This userexists in the vpopmail database 
so I guess it is there where the vchkpwprogram looks when it needs to 
authenticate a user connecting from outside.Right? If this is right why I 
can not connect yet?  Marcos --- On Wed05/02, Craig Smith < [EMAIL 
PROTECTED] > wrote: From: Craig Smith [mailto:[EMAIL PROTECTED] To: 
qmailtoaster-list@qmailtoaster.com Date: Wed, 2 May2007 11:08:05 +0100 
Subject: RE: [qmailtoaster] rcpthosts file  HiThere,Are they by any 
chance using your server as the outgoing smtpserver?  I'vehad that 
error crop up, when an unauthorized user is usingour server forthe 
outgoing 
server.  They either need to useauthenticated login or theirip needs to 
be added to the tcp.smtp file ifthis is the case. 
-Original Message-From:[EMAIL PROTECTED] [mailto:[EMAIL 
PROTECTED] Sent: 02 May 200709:52To: 
qmailtoaster-list@qmailtoaster.comSubject: [qmailtoaster]rcpthosts 
fileHello,  I'm using qmail toaster with fedora 6.  Ihave 
configured POP3 andIMAP for my company mail server and I'm doingthe 
first tests right now.When I send an email from a company accountwith 
same domain to the[EMAIL PROTECTED] account I've created with the 
samecompany domain it receivesthese emails from POP3 account and 
IMAPaccount.  When I send an email from[EMAIL PROTECTED], IMAP and 
POP3, toan outside email like [EMAIL PROTECTED]again it is a 
success.  The problem starts when I tryto send email fromoutside to 
this [EMAIL PROTECTED] account, IMAP orPOP3. I 
receive thefollowing email in Outlook express client when tryingto 
send:  'ServerResponse: 553, sorry that domain isn't in my list 
ofallowed rcpthosts(#5.5.3 - chkuser)'  The contents of my rcpthosts 
fileare:mail-server.company.com company.com c

RE: [qmailtoaster] rcpthosts file

2007-05-02 Thread Craig Smith 
It's probably the client side with the problem.  The ip's in the tcp.smtp
file are the ip's outside the company that you want to allow to relay mail
through your server.

I'm assuming the problem is as follows.

External Client A from outside has email configured to relay through your
server, so in Outlook outgoing smtp server = your mail server.

However client a's ip address is not in tcp.smtp and they are not using smtp
server with authentication.

I'm not entirely sure, but I think that's roughly the problem you are
running into.

do you get the same error when you email from say hotmail?  What is the
exact bounce message?

Also what do the logs files say at the time mail is sent?

tail /var/log/maillog
tail /var/log/qmail/smtp/current


-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
Sent: 02 May 2007 11:32
To: qmailtoaster-list@qmailtoaster.com
Subject: RE: [qmailtoaster] rcpthosts file


Hi,  I have all the company IPs in tcp.smtp and it looks to work fine but
the problem is from outside the company.  I use authentication for this
[EMAIL PROTECTED] user with   /home/vpopmail/bin/vchkpw  on
/var/qmail/supervise/smtp/run and /var/qmail/supervise/pop3/run.   This user
exists in the vpopmail database so I guess it is there where the vchkpw
program looks when it needs to authenticate a user connecting from outside.
Right? If this is right why I can not connect yet?  Marcos --- On Wed
05/02, Craig Smith < [EMAIL PROTECTED] > wrote: From: Craig Smith [mailto:
[EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Date: Wed, 2 May
2007 11:08:05 +0100 Subject: RE: [qmailtoaster] rcpthosts file  Hi
There,Are they by any chance using your server as the outgoing smtp
server?  I'vehad that error crop up, when an unauthorized user is using
our server forthe outgoing server.  They either need to use
authenticated login or theirip needs to be added to the tcp.smtp file if
this is the case. -Original Message-From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 02 May 2007
09:52To: qmailtoaster-list@qmailtoaster.comSubject: [qmailtoaster]
rcpthosts fileHello,  I'm using qmail toaster with fedora 6.  I
have configured POP3 andIMAP for my company mail server and I'm doing
the first tests right now.When I send an email from a company account
with same domain to the[EMAIL PROTECTED] account I've created with the same
company domain it receivesthese emails from POP3 account and IMAP
account.  When I send an email from[EMAIL PROTECTED], IMAP and POP3, to
an outside email like 
[EMAIL PROTECTED]again it is a success.  The problem starts when I try
to send email fromoutside to this [EMAIL PROTECTED] account, IMAP or
POP3. I receive thefollowing email in Outlook express client when trying
to send:  'ServerResponse: 553, sorry that domain isn't in my list of
allowed rcpthosts(#5.5.3 - chkuser)'  The contents of my rcpthosts file
are:mail-server.company.com company.com company.net   I understand that
one cannot enter in the rcphosts file EVERY domain in this world so what
should bethe solution to this problem?  Any help?  Marcos
___Join Excite! -
http://www.excite.comThe most personalized portal on the
Web!
- QmailToaster hosted by: VR Hosted
<http://www.vr.org>-
To unsubscribe, e-mail: 
[EMAIL PROTECTED]For additional commands,
e-mail:
[EMAIL PROTECTED]-
 QmailToaster hosted
by: VR Hosted
<http://www.vr.org>-
To unsubscribe, e-mail:
[EMAIL PROTECTED]For additional commands,
e-mail: [EMAIL PROTECTED]

___
Join Excite! - http://www.excite.com
The most personalized portal on the Web!



-
 QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]



-
 QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: [qmailtoaster] rcpthosts file

2007-05-02 Thread 

Hi,



I have all the company IPs in tcp.smtp and it looks to work fine but the 
problem is from outside the company.



I use authentication for this [EMAIL PROTECTED] user with 



/home/vpopmail/bin/vchkpw



on /var/qmail/supervise/smtp/run and /var/qmail/supervise/pop3/run. 



This user exists in the vpopmail database so I guess it is there where the 
vchkpw program looks when it needs to authenticate a user connecting from 
outside. Right? If this is right why I can not connect yet?



Marcos







 --- On Wed 05/02, Craig Smith < [EMAIL PROTECTED] > wrote:

From: Craig Smith [mailto: [EMAIL PROTECTED]

To: qmailtoaster-list@qmailtoaster.com

Date: Wed, 2 May 2007 11:08:05 +0100

Subject: RE: [qmailtoaster] rcpthosts file



Hi There,Are they by any chance using your server as the outgoing smtp 
server?  I'vehad that error crop up, when an unauthorized user is using our 
server forthe outgoing server.  They either need to use authenticated login 
or theirip needs to be added to the tcp.smtp file if this is the 
case. -Original Message-From: [EMAIL PROTECTED] 
[mailto:[EMAIL PROTECTED] Sent: 02 May 2007 09:52To: 
qmailtoaster-list@qmailtoaster.comSubject: [qmailtoaster] rcpthosts 
fileHello,  I'm using qmail toaster with fedora 6.  I have 
configured POP3 andIMAP for my company mail server and I'm doing the first 
tests right now.When I send an email from a company account with same 
domain to the[EMAIL PROTECTED] account I've created with the same company 
domain it receivesthese emails from POP3 account and IMAP account.  When I 
send an email from[EMAIL PROTECTED], IMAP and POP3, to an outside email 
like 
[EMAIL PROTECTED]again it is a success.  The problem starts when I try to 
send email fromoutside to this [EMAIL PROTECTED] account, IMAP or POP3. I 
receive thefollowing email in Outlook express client when trying to send:  
'ServerResponse: 553, sorry that domain isn't in my list of allowed 
rcpthosts(#5.5.3 - chkuser)'  The contents of my rcpthosts file 
are:mail-server.company.com company.com company.net   I understand that one 
cannot enter in the rcphosts file EVERY domain in this world so what should 
bethe solution to this problem?  Any help?  Marcos 
___Join Excite! - 
http://www.excite.comThe most personalized portal on the 
Web!-
 QmailToaster hosted by: VR Hosted 
<http://www.vr.org>-To
 unsubscribe, e-mail: 
[EMAIL PROTECTED]For additional commands, e-mail: [EMAIL 
PROTECTED]-
 QmailToaster hosted by: VR Hosted 
<http://www.vr.org>-To
 unsubscribe, e-mail: [EMAIL PROTECTED]For additional commands, e-mail: 
[EMAIL PROTECTED]

___
Join Excite! - http://www.excite.com
The most personalized portal on the Web!



-
 QmailToaster hosted by: VR Hosted <http://www.vr.org>
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

RE: [qmailtoaster] rcpthosts file

2007-05-02 Thread Craig Smith 
Hi There,

Are they by any chance using your server as the outgoing smtp server?  I've
had that error crop up, when an unauthorized user is using our server for
the outgoing server.  They either need to use authenticated login or their
ip needs to be added to the tcp.smtp file if this is the case.

 

-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
Sent: 02 May 2007 09:52
To: qmailtoaster-list@qmailtoaster.com
Subject: [qmailtoaster] rcpthosts file


Hello,  I'm using qmail toaster with fedora 6.  I have configured POP3 and
IMAP for my company mail server and I'm doing the first tests right now.
When I send an email from a company account with same domain to the
[EMAIL PROTECTED] account I've created with the same company domain it receives
these emails from POP3 account and IMAP account.  When I send an email from
[EMAIL PROTECTED], IMAP and POP3, to an outside email like [EMAIL PROTECTED]
again it is a success.  The problem starts when I try to send email from
outside to this [EMAIL PROTECTED] account, IMAP or POP3. I receive the
following email in Outlook express client when trying to send:  'Server
Response: 553, sorry that domain isn't in my list of allowed rcpthosts
(#5.5.3 - chkuser)'  The contents of my rcpthosts file are:
mail-server.company.com company.com company.net   I understand that one can
not enter in the rcphosts file EVERY domain in this world so what should be
the solution to this problem?  Any help?  Marcos 

___
Join Excite! - http://www.excite.com
The most personalized portal on the Web!



-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]



-
 QmailToaster hosted by: VR Hosted 
-
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]