Re: [Quantum Owners] H4 electrics - inertia switch

2022-09-25 Thread julian



Thanks for confirmation. Unfortunately there is no button unless it is 
deep inside the tube at the top. I can't feel anything in there. I'll 
probably have to extract the thing and see if I find something to push 
on.


On 2022-09-25 19:17, Pete M wrote:


That's the switch - to reset it you just press the button on the top

On Sunday, 25 September 2022 at 16:33:07 UTC+1 julian wrote:


Hi

I have found an air bag sensor (though there are none in the car of 
course) and close by another potential suspect - see attached. It's 
the right sort of size but has three connections where the manual says 
two, although one appears at least to be the right colour code. Also 
it has no reset button. However what it does have at the top is a 
cylinder which might once have been the housing for a plunger.


I haven't yet tried testing anything like circuit tracing because the 
plastic of the connector look easy to break. If it is the right unit, 
I will attempt to remove it and see if it can be reset.


Alternatively do you know if a replacement might be obtained?

Julian


--
--
You received this message because you are subscribed to the Google 
Groups "Quantum Owners Group" group.

To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en


IMPORTANT NOTE: All information presented herewith is provided on an 
"As Is" basis, without warranty or the implication thereof. Neither the 
Quantum Owners Club nor the individuals associated with the Quantum 
Owners Club or in the preparation of the above information shall have 
any liability to any person or entity with respect to liability, loss, 
or damage caused or alleged to be caused directly or indirectly by the 
instructions contained within this or related message(s).

---
You received this message because you are subscribed to the Google 
Groups "Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to quantumowners+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quantumowners/ffc8072f-2f00-468e-a631-7eded105e6e2n%40googlegroups.com 
[1].



Links:
--
[1] 
https://groups.google.com/d/msgid/quantumowners/ffc8072f-2f00-468e-a631-7eded105e6e2n%40googlegroups.com?utm_medium=emailutm_source=footer


--
--
You received this message because you are subscribed to the Google Groups "Quantum 
Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor 
the individuals associated with the Quantum Owners Club or in the preparation of the 
above information shall have any liability to any person or entity with respect to 
liability, loss, or damage caused or alleged to be caused directly or indirectly by the 
instructions contained within this or related message(s).
--- 
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.

To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quantumowners/3ac0ddad5568d76a8d211abf85046f96%40cityaudioservices.com.


Re: [Quantum Owners] H4 electrics - inertia switch

2022-09-25 Thread Pete M
That's the switch - to reset it you just press the button on the top


On Sunday, 25 September 2022 at 16:33:07 UTC+1 julian wrote:

> Hi
>
> I have found an air bag sensor (though there are none in the car of 
> course) and close by another potential suspect - see attached. It's the 
> right sort of size but has three connections where the manual says two, 
> although one appears at least to be the right colour code. Also it has no 
> reset button. However what it does have at the top is a cylinder which 
> might once have been the housing for a plunger.
>
> I haven't yet tried testing anything like circuit tracing because the 
> plastic of the connector look easy to break. If it is the right unit, I 
> will attempt to remove it and see if it can be reset. 
>
> Alternatively do you know if a replacement might be obtained? 
>
> Julian
>
>

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/quantumowners/ffc8072f-2f00-468e-a631-7eded105e6e2n%40googlegroups.com.