[qubes-users] No space left on device

[Franz]

Trying to update dom0 I get a long list of "No space left on device", but
the hard disk icon on the panel tells that total disk usage is only 23.4%
lvm 23.4% 195.4GiB/835.8 GIB varlibqubes.

with more detail the error message is:
tar: var: Cannot mkdir: No space left on device

df -h tells that Use % is lower than 1% or 0% for all items, except
/dev/sda1  that is 25%. So even on this side everything seems ok

So why is it unable to update dom0?

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/CAPzH-qAjn2kDGzWKvu4Ki3wnOiDMfJAS6zgdRFtfiUioW_8ZRA%40mail.gmail.com.

Re: [qubes-users] 4.1 rc1 'start automatically on boot' saving abnormality

[Marek Marczykowski-Górecki]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256

On Thu, Nov 04, 2021 at 03:16:22PM -0700, code9n wrote:
> Note:  Made a Tasket Qubes vpn support networking qube on Qubes 4.1 rc1 
> which works efficiently as always but when I check the 'start qube 
> automatically on boot' box in Qube Settings / manager gui it won't save if 
> I click on 'apply' first.
>   But it will save if I just check the box then click directly on 'OK'.

Can you provide exact steps you've done? Which buttons and in which
order you clicked? I just tried and clicking 'apply' just after
selecting 'start qube automatically on boot' does save the setting for
me.

What qubes-manager package version you have, you can check it with 
`rpm -q qubes-manager` command.

- -- 
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
-BEGIN PGP SIGNATURE-

iQEzBAEBCAAdFiEEhrpukzGPukRmQqkK24/THMrX1ywFAmGEfuoACgkQ24/THMrX
1yxljQf9EVaX9aJGRaY7KPp8Zl+d4V01MSdoKLM0BsG0I1jiY++yLdBn+SlGCI6p
OjklXd0RmhRfTF+wQ/PZ0UTF3UkccClgd8DQ4pIncQYQIfH190ZhRbsp2Fl5qGnZ
O7NUZXJk/iH6/MZYu+rV9ydtaQd1yhhDgCI78p5HdrQkAjoOPy0xemEoQks1jHTY
3+UrKuC3qdWiNBNmfxNd88wvppbki9uDW8HRnCHcgYFdaYhYmHhnVpzY5IMTjVqs
p+k+uiBnJ22KG2PqI7hgYJQdEThyLJdX3iNJbwscRGFNoxPlIY8qQSOCrnC1GARB
M7535Ox00MkLtbTMjuncw9H76hSD8w==
=YTsL
-END PGP SIGNATURE-

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/YYR%2B6yRiR303/u2q%40mail-itl.

Re: [qubes-users] 4.1 rc1 UK keyboard reverted to US layout

[Marek Marczykowski-Górecki]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256

On Thu, Nov 04, 2021 at 03:10:20PM -0700, code9n wrote:
> 
> Note:  I carefully made sure the GB / UK keyboard option was selected 
> during install but have the US set up on my UK keyboard Lenovo T430.

Looks like this issue: https://github.com/QubesOS/qubes-issues/issues/6814

- -- 
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
-BEGIN PGP SIGNATURE-

iQEzBAEBCAAdFiEEhrpukzGPukRmQqkK24/THMrX1ywFAmGEfgYACgkQ24/THMrX
1yxdAgf+LBOJK4Sp2hv5FS2zz/8XRN+QktbnvXh4MeOrJ7iGEAC+5i6+wvEjEUN7
IFk+KNtCoknHwwtQXd/9PZwdcx3kO9KfS0BrQ8HNjSK/sh/rM+qC5vRRdU6UyxFK
goK7r0W7R9lWJwdxfQ0gzZZa3UlidwVTuG2s9hecpsh7Fdxd1OKx2DzVZU3jPacN
S6ea+t5I8MaLnOA6X0OaQBXMLRJNOId9glzAOrKtfsL7nQ8IZ5kzZV2ClJvbMe91
fEaaVVnSwssrYDt95k1/Xb/flclFydRwkZuLMUd90COOAEENxt12qGNVWin9sk3Z
RwOAc9zf0P1nGq0tN/qfkOfZZUfpew==
=D5Xk
-END PGP SIGNATURE-

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/YYR%2BBolacEhXKDuF%40mail-itl.

[qubes-users] 4.1 rc1 'start automatically on boot' saving abnormality

[code9n]

Note:  Made a Tasket Qubes vpn support networking qube on Qubes 4.1 rc1 
which works efficiently as always but when I check the 'start qube 
automatically on boot' box in Qube Settings / manager gui it won't save if 
I click on 'apply' first.
  But it will save if I just check the box then click directly on 'OK'.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/0dd4fe08-91c6-4242-b5b9-e541357c6bd5n%40googlegroups.com.

[qubes-users] 4.1 rc1 UK keyboard reverted to US layout

[code9n]

Note:  I carefully made sure the GB / UK keyboard option was selected 
during install but have the US set up on my UK keyboard Lenovo T430.

-- 
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/18ea5ac6-047a-46cd-94d4-2ff8e29a6188n%40googlegroups.com.

Re: [EXT] Re: [qubes-users] Installation start text leads to a blank screen.

[Ulrich Windl]

On 11/2/21 1:15 AM, 'awokd' via qubes-users wrote:

Shadow Wolf:
Hi.  I'm trying to install Qubes on my laptop, but everytime I load 
the USB

drive it spawns a bunch of text followed by a blank screen.  I tried
partitioning the ISO at 4 GB as recommended by the trouble shooting page,
but sadly, no luck.  I have pictures of the text I took with my phone, 
but

unfortunatly, they are a bit blurry and need a bit of close up to see the
text properly since the picture is a bit blurry. Because of their 
size

I can't yet upload both.  Instead I uploaded the first  [image:
20211031_161610.jpg]

Update your BIOS if you haven't already, and check if VT-d is enabled in 
BIOS settings. Also, sometimes it can help to see what workarounds 
others with similar models have had to do in the HCL 
(https://www.qubes-os.org/hcl/). Don't see any Dell G5s, but maybe 
compare against other Dell models from the same time-frame.


Another idea would be trying an external monitor in case the video 
timing is out of bound for the built-in panel (I had such an issue with 
my monitor).




--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/17b5ebae-7a5a-f96c-d7b0-abf61d545932%40rz.uni-regensburg.de.

Re: [EXT] [qubes-users] Installation start text leads to a blank screen.

[Ulrich Windl]

On 10/31/21 10:32 PM, Shadow Wolf wrote:
Hi.  I'm trying to install Qubes on my laptop, but everytime I load the 
USB drive it spawns a bunch of text followed by a blank screen.  I tried 
partitioning the ISO at 4 GB as recommended by the trouble shooting 
page, but sadly, no luck.  I have pictures of the text I took with my 
phone, but unfortunatly, they are a bit blurry and need a bit of close 
up to see the text properly since the picture is a bit blurry.  Because 
of their size I can't yet upload both.  Instead I uploaded the first 
20211031_161610.jpg


Well, most mobile cams allow setting the resolution; if not, you could 
still use software like GIMP to downscale the images or use a JPEG 
quality less than 99. That should result in images of reasonable size.

Despite of that you could try to "unsharp mask" blurry images.
Even better maybe: Hold the mobily steady before when you expect to make 
a shot. Then just make the shot...




--
You received this message because you are subscribed to the Google 
Groups "qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to qubes-users+unsubscr...@googlegroups.com 
.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/682e08e0-2486-4ed3-bfb1-239525d80337n%40googlegroups.com 
.


--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/86122b60-e25e-5d32-6458-e8791c354ae4%40rz.uni-regensburg.de.

Re: [EXT] Re: [qubes-users] Qubes does not boot any more. Very abruptly. Who can help?

[Ulrich Windl]

On 10/30/21 9:01 PM, 'awokd' via qubes-users wrote:

Michael Singer:

I have just solved the problem; the system starts up normally again. 
The solution was to overwrite the second and faulty installation on 
the pcie nvme disk. I do not understand why my working sata 
installation scans the pci mass storage device at startup. Wait, I 
just remembered that I read a long time ago that something like this 
can happen with Qubes and Xen. Is there maybe a way to prevent pci 
mass storage devices from being automatically scanned and mounted in 
dom0 afterwards?


Strange it broke without any changes, but glad it's working now. One way 
to avoid scan finding anything might be to use different encryption 
passwords between installations. Seems like there should be some way to 
blacklist specific mass storage devices from scan, though.


Some people forget to change IDs when cloning disks.
GPT has GUIDs, LVM used GUIDS, filesystems use GUIDs, etc.
When mounting via GUID and the GUID is non-unique, you are heading for 
trouble.






--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/b44348f2-d3bd-d066-a408-29ad0db420c3%40rz.uni-regensburg.de.

Re: [EXT] [qubes-users] Extract image file from Qubes 4.x

[Ulrich Windl]

On 10/25/21 11:28 AM, r.wiesb...@web.de wrote:

In Qubes 4.x the images are no longer ordinary files accessible from the
dom0 file system. So how can I extract them as VM images (.img files in
Q 3.x) in Qubes 4.x? In the wiki I only find how to delete, but not how
to extract an image fom LVM. Thank you.


Try "kpartx -va /dev/qubes-dom0/vm-..." for your favorite VM. That 
creates device files for each partition, so you could mount those 
(read-only).


See "man kpartx".





--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/45d708b4-cc9e-83f9-5253-bf33ea098778%40rz.uni-regensburg.de.

[qubes-users] Q: Anybody running Qubes-OS on TUXEDO Nano Pro?

[Ulrich Windl]

Hi!

I'm wondering: Does anybody run Qubes OS on a TUXEDO Nano Pro - Gen11 
(e.g. with AMD Ryzen 7 4800U)?


Maybe this configuration (see 
https://www.tuxedocomputers.com/en/Linux-Hardware/Linux-Computers-/-PCs/AMD-Systems/TUXEDO-Nano-Pro-Gen11.tuxedo#):

Current Configuration
Product No.: 1226

32 GB (1x 32GB) 3200MHz CL22 Samsung ( +150,00 EUR)
AMD Ryzen 7 4800U (8x 1.80-4.20 GHz, Eight-Core, 16 Threads, 12 MB 
Cache, 10-25 W TDP) ( +300,00 EUR)

1000 GB Samsung 860 EVO (M.2 SATAIII) ( +95,00 EUR)
without mass-storage
Intel Wi-Fi 6 AX200 Series (802.11ax | 2,4 & 5 GHz | Bluetooth 5.2)
without Linux
without Windows
24 months / 2 years warranty
Assembled within 2 weeks when in stock

1.185,00 EUR

Looks like a nice small box.

Regards,
Ulrich

--
You received this message because you are subscribed to the Google Groups 
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to qubes-users+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/qubes-users/4d1f383b-e0c6-6f0a-8519-841da26c1a1a%40rz.uni-regensburg.de.