Re: [qubes-users] Openbsd HVM - Network Issues
On 5/29/19 11:36 PM, 'awokd' via qubes-users wrote: ronpunz: SOLVED I had mirage-firewall set as the default netvm. I changed the openbsdVM firewall to sys-firewall and the network now works fine. Noticed Mirage firewall 0.6 had a couple bugfixes for HVM support. Since you upgraded, maybe it would be OK to switch back now. Yes, you're right. Switching to mirage-firewall now works. You need to be aware though that a revised gateway will be issued - which needs entering into openbsd's /etc/mygate. Thank you -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/6f911365-ca57-dcc4-34ec-8e29a56d83ba%40riseup.net. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Openbsd HVM - Network Issues
ronpunz: SOLVED I had mirage-firewall set as the default netvm. I changed the openbsdVM firewall to sys-firewall and the network now works fine. Noticed Mirage firewall 0.6 had a couple bugfixes for HVM support. Since you upgraded, maybe it would be OK to switch back now. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/03415522-2c89-9af0-6f73-1179858948c0%40danwin1210.me. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Openbsd HVM - Network Issues
On 5/29/19 2:15 PM, unman wrote: On Wed, May 29, 2019 at 04:48:12AM -0700, ronp...@riseup.net wrote: On 2019-05-28 23:36, unman wrote: On Tue, May 28, 2019 at 07:29:31AM -0700, ronp...@riseup.net wrote: On 2019-05-28 13:15, 'awokd' via qubes-users wrote: ronp...@riseup.net: On 2019-05-28 12:10, 'awokd' via qubes-users wrote: ronp...@riseup.net wrote on 5/28/19 11:57 AM: Re Qubes 4.0. I have a openbsdVM but am unable to connect to internet. I'm using ip adresses from qubes manager i.e ip=10.137.0.28 netmask=255.255.255.255 gateway=10.137.0.6 dns=10.139.1.1 & 10.139.1.2. I'm able to ping 10.137.0.28 and 10.137.0.6 but unable to ping say google.com. I've tried without success copying the output from the command "ifconfig" & "route show" - maybe someone can give me advice on how to post the output to this forum? Try making your netmask 255.255.255.0. You need to have Qubes Tools running for clipboard integration, so you might only be able to post screenshots if necessary. Thanks for your prompt reply. I have tried netmask 255.255.255.0 - but no success. As you suggested, attached is a screenshot of the command "ifconfig" Screenshot looks fine. "Route show" says your default route is to 10.137.0.6? Maybe reboot the HVM for good luck, if you haven't since the subnet mask update. Seems like you're almost there since you can ping 10.137.0.6. As you suggested, I rebooted but it complained about netmask 255.255.255.0 and refused to ping anything. I tried reverting to netmask 255.255.255.255 and now cannot ping 10.137.06 I'm adjusting these settings in /etc/hostname.xnf0 which now reads inet 10.137.0.28 255.255.255.255 10.137.0.6 Does that look right to you? After changing these setting i run "sh /etc/netstart" Which I think is equivalent to rebooting? man hostname.if man myname Keep the 255.255.255.0 netmask Put 10.137.0.6 in /etc/mygate Thanks Unman for your latest input. I did as you suggested but am still unable to ping the gateway (10.137.0.6). My network settings now look like this: /etc/hostname.xnf0 = "inet 10.137.0.28 255.255.255.0"; /etc/mygate = "10.137.0.6"; /etc/resolv.conf = "search my.domain nameserver 10.139.1.1 nameserver 10.139.1.2 lookup file bind". Thinking I'd maybe corrupted some other file, I created a new openbsdVM and input the network settings during the setup procedure. However I got exactly the same result - unable to ping the gateway. Any further troubleshooting suggestions would be much appreciated? Check the route on the netvm. You likely have two routes back to the 10.137.0.28 address. Delete one. SOLVED I had mirage-firewall set as the default netvm. I changed the openbsdVM firewall to sys-firewall and the network now works fine. Thanks for your help -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/939835b8-8474-8439-0ca1-1f166f9d7496%40riseup.net. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Openbsd HVM - Network Issues
On Wed, May 29, 2019 at 04:48:12AM -0700, ronp...@riseup.net wrote: > On 2019-05-28 23:36, unman wrote: > > On Tue, May 28, 2019 at 07:29:31AM -0700, ronp...@riseup.net wrote: > >> On 2019-05-28 13:15, 'awokd' via qubes-users wrote: > >> > ronp...@riseup.net: > >> >> On 2019-05-28 12:10, 'awokd' via qubes-users wrote: > >> >>> ronp...@riseup.net wrote on 5/28/19 11:57 AM: > >> Re Qubes 4.0. > >> I have a openbsdVM but am unable to connect to internet. I'm using ip > >> adresses from qubes manager i.e ip=10.137.0.28 netmask=255.255.255.255 > >> gateway=10.137.0.6 dns=10.139.1.1 & 10.139.1.2. > >> I'm able to ping 10.137.0.28 and 10.137.0.6 but unable to ping say > >> google.com. > >> > >> I've tried without success copying the output from the command > >> "ifconfig" & "route show" - maybe someone can give me advice on how to > >> post the output to this forum? > >> > >> >>> Try making your netmask 255.255.255.0. You need to have Qubes Tools > >> >>> running for clipboard integration, so you might only be able to post > >> >>> screenshots if necessary. > >> >> > >> >> Thanks for your prompt reply. I have tried netmask 255.255.255.0 - but > >> >> no success. > >> >> As you suggested, attached is a screenshot of the command "ifconfig" > >> >> > >> > Screenshot looks fine. "Route show" says your default route is to > >> > 10.137.0.6? Maybe reboot the HVM for good luck, if you haven't since > >> > the subnet mask update. Seems like you're almost there since you can > >> > ping 10.137.0.6. > >> As you suggested, I rebooted but it complained about netmask > >> 255.255.255.0 and refused to ping anything. > >> I tried reverting to netmask 255.255.255.255 and now cannot ping > >> 10.137.06 > >> I'm adjusting these settings in /etc/hostname.xnf0 which now reads inet > >> 10.137.0.28 255.255.255.255 10.137.0.6 Does that look right to you? > >> After changing these setting i run "sh /etc/netstart" Which I think is > >> equivalent to rebooting? > > > > man hostname.if > > man myname > > > > Keep the 255.255.255.0 netmask > > Put 10.137.0.6 in /etc/mygate > > Thanks Unman for your latest input. I did as you suggested but am still > unable to ping the gateway (10.137.0.6). > My network settings now look like this: /etc/hostname.xnf0 = "inet > 10.137.0.28 255.255.255.0"; /etc/mygate = "10.137.0.6"; /etc/resolv.conf > = "search my.domain nameserver 10.139.1.1 nameserver 10.139.1.2 lookup > file bind". > Thinking I'd maybe corrupted some other file, I created a new openbsdVM > and input the network settings during the setup procedure. However I got > exactly the same result - unable to ping the gateway. > Any further troubleshooting suggestions would be much appreciated? > Check the route on the netvm. You likely have two routes back to the 10.137.0.28 address. Delete one. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/20190529141544.i6mc3zlyrtqpkrca%40thirdeyesecurity.org. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Openbsd HVM - Network Issues
On 2019-05-28 23:36, unman wrote: > On Tue, May 28, 2019 at 07:29:31AM -0700, ronp...@riseup.net wrote: >> On 2019-05-28 13:15, 'awokd' via qubes-users wrote: >> > ronp...@riseup.net: >> >> On 2019-05-28 12:10, 'awokd' via qubes-users wrote: >> >>> ronp...@riseup.net wrote on 5/28/19 11:57 AM: >> Re Qubes 4.0. >> I have a openbsdVM but am unable to connect to internet. I'm using ip >> adresses from qubes manager i.e ip=10.137.0.28 netmask=255.255.255.255 >> gateway=10.137.0.6 dns=10.139.1.1 & 10.139.1.2. >> I'm able to ping 10.137.0.28 and 10.137.0.6 but unable to ping say >> google.com. >> >> I've tried without success copying the output from the command >> "ifconfig" & "route show" - maybe someone can give me advice on how to >> post the output to this forum? >> >> >>> Try making your netmask 255.255.255.0. You need to have Qubes Tools >> >>> running for clipboard integration, so you might only be able to post >> >>> screenshots if necessary. >> >> >> >> Thanks for your prompt reply. I have tried netmask 255.255.255.0 - but >> >> no success. >> >> As you suggested, attached is a screenshot of the command "ifconfig" >> >> >> > Screenshot looks fine. "Route show" says your default route is to >> > 10.137.0.6? Maybe reboot the HVM for good luck, if you haven't since >> > the subnet mask update. Seems like you're almost there since you can >> > ping 10.137.0.6. >> As you suggested, I rebooted but it complained about netmask >> 255.255.255.0 and refused to ping anything. >> I tried reverting to netmask 255.255.255.255 and now cannot ping >> 10.137.06 >> I'm adjusting these settings in /etc/hostname.xnf0 which now reads inet >> 10.137.0.28 255.255.255.255 10.137.0.6 Does that look right to you? >> After changing these setting i run "sh /etc/netstart" Which I think is >> equivalent to rebooting? > > man hostname.if > man myname > > Keep the 255.255.255.0 netmask > Put 10.137.0.6 in /etc/mygate Thanks Unman for your latest input. I did as you suggested but am still unable to ping the gateway (10.137.0.6). My network settings now look like this: /etc/hostname.xnf0 = "inet 10.137.0.28 255.255.255.0"; /etc/mygate = "10.137.0.6"; /etc/resolv.conf = "search my.domain nameserver 10.139.1.1 nameserver 10.139.1.2 lookup file bind". Thinking I'd maybe corrupted some other file, I created a new openbsdVM and input the network settings during the setup procedure. However I got exactly the same result - unable to ping the gateway. Any further troubleshooting suggestions would be much appreciated? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/b58d9876238bdc8f51ff109de138deb3%40riseup.net. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Openbsd HVM - Network Issues
On Tue, May 28, 2019 at 07:29:31AM -0700, ronp...@riseup.net wrote: > On 2019-05-28 13:15, 'awokd' via qubes-users wrote: > > ronp...@riseup.net: > >> On 2019-05-28 12:10, 'awokd' via qubes-users wrote: > >>> ronp...@riseup.net wrote on 5/28/19 11:57 AM: > Re Qubes 4.0. > I have a openbsdVM but am unable to connect to internet. I'm using ip > adresses from qubes manager i.e ip=10.137.0.28 netmask=255.255.255.255 > gateway=10.137.0.6 dns=10.139.1.1 & 10.139.1.2. > I'm able to ping 10.137.0.28 and 10.137.0.6 but unable to ping say > google.com. > > I've tried without success copying the output from the command > "ifconfig" & "route show" - maybe someone can give me advice on how to > post the output to this forum? > > >>> Try making your netmask 255.255.255.0. You need to have Qubes Tools > >>> running for clipboard integration, so you might only be able to post > >>> screenshots if necessary. > >> > >> Thanks for your prompt reply. I have tried netmask 255.255.255.0 - but > >> no success. > >> As you suggested, attached is a screenshot of the command "ifconfig" > >> > > Screenshot looks fine. "Route show" says your default route is to > > 10.137.0.6? Maybe reboot the HVM for good luck, if you haven't since > > the subnet mask update. Seems like you're almost there since you can > > ping 10.137.0.6. > As you suggested, I rebooted but it complained about netmask > 255.255.255.0 and refused to ping anything. > I tried reverting to netmask 255.255.255.255 and now cannot ping > 10.137.06 > I'm adjusting these settings in /etc/hostname.xnf0 which now reads inet > 10.137.0.28 255.255.255.255 10.137.0.6 Does that look right to you? > After changing these setting i run "sh /etc/netstart" Which I think is > equivalent to rebooting? man hostname.if man myname Keep the 255.255.255.0 netmask Put 10.137.0.6 in /etc/mygate -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/20190528233641.jcmea2kmb3kyyqlj%40thirdeyesecurity.org. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Openbsd HVM - Network Issues
ronp...@riseup.net wrote on 5/28/19 2:29 PM: As you suggested, I rebooted but it complained about netmask 255.255.255.0 and refused to ping anything. I tried reverting to netmask 255.255.255.255 and now cannot ping 10.137.06 I'm adjusting these settings in /etc/hostname.xnf0 which now reads inet 10.137.0.28 255.255.255.255 10.137.0.6 Does that look right to you? After changing these setting i run "sh /etc/netstart" Which I think is equivalent to rebooting? Sorry, you've exceeded my minimal knowledge of BSD already. All HVM networking works the same, so I don't get why it's not here. I know some people have been able to get OpenBSD working; try searching this mailing list if you haven't yet or hopefully one of them will chime in. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/f6faa962-c220-8de8-334b-f9273516523c%40danwin1210.me. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Openbsd HVM - Network Issues
On 2019-05-28 13:15, 'awokd' via qubes-users wrote: > ronp...@riseup.net: >> On 2019-05-28 12:10, 'awokd' via qubes-users wrote: >>> ronp...@riseup.net wrote on 5/28/19 11:57 AM: Re Qubes 4.0. I have a openbsdVM but am unable to connect to internet. I'm using ip adresses from qubes manager i.e ip=10.137.0.28 netmask=255.255.255.255 gateway=10.137.0.6 dns=10.139.1.1 & 10.139.1.2. I'm able to ping 10.137.0.28 and 10.137.0.6 but unable to ping say google.com. I've tried without success copying the output from the command "ifconfig" & "route show" - maybe someone can give me advice on how to post the output to this forum? >>> Try making your netmask 255.255.255.0. You need to have Qubes Tools >>> running for clipboard integration, so you might only be able to post >>> screenshots if necessary. >> >> Thanks for your prompt reply. I have tried netmask 255.255.255.0 - but >> no success. >> As you suggested, attached is a screenshot of the command "ifconfig" >> > Screenshot looks fine. "Route show" says your default route is to > 10.137.0.6? Maybe reboot the HVM for good luck, if you haven't since > the subnet mask update. Seems like you're almost there since you can > ping 10.137.0.6. As you suggested, I rebooted but it complained about netmask 255.255.255.0 and refused to ping anything. I tried reverting to netmask 255.255.255.255 and now cannot ping 10.137.06 I'm adjusting these settings in /etc/hostname.xnf0 which now reads inet 10.137.0.28 255.255.255.255 10.137.0.6 Does that look right to you? After changing these setting i run "sh /etc/netstart" Which I think is equivalent to rebooting? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/79f1b3e3c32bce483a35aa1ff7d167e8%40riseup.net. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Openbsd HVM - Network Issues
ronp...@riseup.net: On 2019-05-28 12:10, 'awokd' via qubes-users wrote: ronp...@riseup.net wrote on 5/28/19 11:57 AM: Re Qubes 4.0. I have a openbsdVM but am unable to connect to internet. I'm using ip adresses from qubes manager i.e ip=10.137.0.28 netmask=255.255.255.255 gateway=10.137.0.6 dns=10.139.1.1 & 10.139.1.2. I'm able to ping 10.137.0.28 and 10.137.0.6 but unable to ping say google.com. I've tried without success copying the output from the command "ifconfig" & "route show" - maybe someone can give me advice on how to post the output to this forum? Try making your netmask 255.255.255.0. You need to have Qubes Tools running for clipboard integration, so you might only be able to post screenshots if necessary. Thanks for your prompt reply. I have tried netmask 255.255.255.0 - but no success. As you suggested, attached is a screenshot of the command "ifconfig" Screenshot looks fine. "Route show" says your default route is to 10.137.0.6? Maybe reboot the HVM for good luck, if you haven't since the subnet mask update. Seems like you're almost there since you can ping 10.137.0.6. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/062c3712-867b-4cb8-d23a-db6bb3de4c43%40danwin1210.me. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Openbsd HVM - Network Issues
On 2019-05-28 12:10, 'awokd' via qubes-users wrote: > ronp...@riseup.net wrote on 5/28/19 11:57 AM: >> Re Qubes 4.0. >> I have a openbsdVM but am unable to connect to internet. I'm using ip >> adresses from qubes manager i.e ip=10.137.0.28 netmask=255.255.255.255 >> gateway=10.137.0.6 dns=10.139.1.1 & 10.139.1.2. >> I'm able to ping 10.137.0.28 and 10.137.0.6 but unable to ping say >> google.com. >> >> I've tried without success copying the output from the command >> "ifconfig" & "route show" - maybe someone can give me advice on how to >> post the output to this forum? >> > Try making your netmask 255.255.255.0. You need to have Qubes Tools > running for clipboard integration, so you might only be able to post > screenshots if necessary. Thanks for your prompt reply. I have tried netmask 255.255.255.0 - but no success. As you suggested, attached is a screenshot of the command "ifconfig" -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/daa0c029a6cbd858a68062f7bc4741f0%40riseup.net. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Openbsd HVM - Network Issues
ronp...@riseup.net wrote on 5/28/19 11:57 AM: Re Qubes 4.0. I have a openbsdVM but am unable to connect to internet. I'm using ip adresses from qubes manager i.e ip=10.137.0.28 netmask=255.255.255.255 gateway=10.137.0.6 dns=10.139.1.1 & 10.139.1.2. I'm able to ping 10.137.0.28 and 10.137.0.6 but unable to ping say google.com. I've tried without success copying the output from the command "ifconfig" & "route show" - maybe someone can give me advice on how to post the output to this forum? Try making your netmask 255.255.255.0. You need to have Qubes Tools running for clipboard integration, so you might only be able to post screenshots if necessary. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/b9764d3a-f661-f3a7-7c69-6606232aff0e%40danwin1210.me. For more options, visit https://groups.google.com/d/optout.
