Re: [R] Pairwise correlation
On Wed, Nov 16, 2011 at 11:22 PM, muzz56 musah...@gmail.com wrote: Thanks to everyone who replied to my post, I finally got it to work. I am however not sure how well it worked since it run so quickly, but seems like I have a 2000 x 2000 data set. Behold the great and mighty power that is R! Don't worry -- on a decent machine the correlation of a 2k x 2k data set should be pretty fast. (It's about 9 seconds on my old-ish laptop with a bunch of other junk running) My followup questions would be, how do I get only pairs with say a certain pearson correlation value additionally it seems like my output didn't retain the headers but instead replaced them with numbers making it hard to know which gene pairs correlate. This is a little worrisome: R carries column names through cor() so this would suggest you weren't using them. Were your headers listed as part of your data (instead of being names)? If so, they would have been taken as numbers. Take a look at dimnames(NAMEOFDATA) -- if your headers aren't there, then they are being treated as data instead of numbers. If they are, can you provide some reproducible code and we can debug more fully. The easiest way to send data is to use the dput() function to get a copy-pasteable plain text representation. It would also be great if you could restrict it to a subset of your data rather than the full 4M data points, but if that's hard to do, don't worry. You should have expected behavior like X - matrix(1:9,3) colnames(X) - c(A,B,C) cor(X) # Prints with labels Michael On 16 November 2011 17:11, Nordlund, Dan (DSHS/RDA) [via R] ml-node+s789695n4078114...@n4.nabble.com wrote: -Original Message- From: [hidden email]http://user/SendEmail.jtp?type=nodenode=4078114i=0[mailto: r-help-bounces@r- project.org] On Behalf Of muzz56 Sent: Wednesday, November 16, 2011 12:28 PM To: [hidden email]http://user/SendEmail.jtp?type=nodenode=4078114i=1 Subject: Re: [R] Pairwise correlation Thanks Peter. I tried this after reading in the csv (read.csv) and converted the data to matrix (as.matrix). But when I tried the correlation, I keeping getting the error (x must be numeric) yet when I view the data, its numeric. What does R tell you if you execute the following? str(x) Just because the data looks like it is numeric when it prints doesn't mean it is. Dan Daniel J. Nordlund Washington State Department of Social and Health Services Planning, Performance, and Accountability Research and Data Analysis Division Olympia, WA 98504-5204 __ [hidden email] http://user/SendEmail.jtp?type=nodenode=4078114i=2mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. -- If you reply to this email, your message will be added to the discussion below: http://r.789695.n4.nabble.com/Pairwise-correlation-tp4076963p4078114.html To unsubscribe from Pairwise correlation, click herehttp://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_codenode=4076963code=bXVzYWhhc3NAZ21haWwuY29tfDQwNzY5NjN8LTE5ODYxNDM0OTI= . NAMLhttp://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=macro_viewerid=instant_html%21nabble%3Aemail.namlbase=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.InstantMailNamespacebreadcrumbs=instant+emails%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml -- View this message in context: http://r.789695.n4.nabble.com/Pairwise-correlation-tp4076963p4078915.html Sent from the R help mailing list archive at Nabble.com. [[alternative HTML version deleted]] __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] Pairwise correlation
I think something like this should do it, but I can't test without data: rownames(mydata) - mydata[,1] # Put the elements in the first column as rownames mydata - mydata[,-1] # drop the things that are now rownames Michael On Thu, Nov 17, 2011 at 9:23 AM, Musa Hassan musah...@gmail.com wrote: Hi Michael, Thanks for the response. I have noticed that the error occurred during my data read. It appears that the rownames (which when the data is transposed become my colnames) were converted to numbers instead of strings as they should be. The original header names don't change, just the rownames. I have to figure out how to import the data and have the strings not converted. Right now am using: mydata = read.csv(mydata.csv, headers=T,stringsAsFactors=F) then to convert the data frame to matrix mydata=data.matrix(mydata) Then I just do the correlation as Peter suggested. expression=cor(t(expression)) Thanks. On 17 November 2011 08:51, R. Michael Weylandt michael.weyla...@gmail.com wrote: On Wed, Nov 16, 2011 at 11:22 PM, muzz56 musah...@gmail.com wrote: Thanks to everyone who replied to my post, I finally got it to work. I am however not sure how well it worked since it run so quickly, but seems like I have a 2000 x 2000 data set. Behold the great and mighty power that is R! Don't worry -- on a decent machine the correlation of a 2k x 2k data set should be pretty fast. (It's about 9 seconds on my old-ish laptop with a bunch of other junk running) My followup questions would be, how do I get only pairs with say a certain pearson correlation value additionally it seems like my output didn't retain the headers but instead replaced them with numbers making it hard to know which gene pairs correlate. This is a little worrisome: R carries column names through cor() so this would suggest you weren't using them. Were your headers listed as part of your data (instead of being names)? If so, they would have been taken as numbers. Take a look at dimnames(NAMEOFDATA) -- if your headers aren't there, then they are being treated as data instead of numbers. If they are, can you provide some reproducible code and we can debug more fully. The easiest way to send data is to use the dput() function to get a copy-pasteable plain text representation. It would also be great if you could restrict it to a subset of your data rather than the full 4M data points, but if that's hard to do, don't worry. You should have expected behavior like X - matrix(1:9,3) colnames(X) - c(A,B,C) cor(X) # Prints with labels Michael On 16 November 2011 17:11, Nordlund, Dan (DSHS/RDA) [via R] ml-node+s789695n4078114...@n4.nabble.com wrote: -Original Message- From: [hidden email]http://user/SendEmail.jtp?type=nodenode=4078114i=0[mailto: r-help-bounces@r- project.org] On Behalf Of muzz56 Sent: Wednesday, November 16, 2011 12:28 PM To: [hidden email]http://user/SendEmail.jtp?type=nodenode=4078114i=1 Subject: Re: [R] Pairwise correlation Thanks Peter. I tried this after reading in the csv (read.csv) and converted the data to matrix (as.matrix). But when I tried the correlation, I keeping getting the error (x must be numeric) yet when I view the data, its numeric. What does R tell you if you execute the following? str(x) Just because the data looks like it is numeric when it prints doesn't mean it is. Dan Daniel J. Nordlund Washington State Department of Social and Health Services Planning, Performance, and Accountability Research and Data Analysis Division Olympia, WA 98504-5204 __ [hidden email] http://user/SendEmail.jtp?type=nodenode=4078114i=2mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. -- If you reply to this email, your message will be added to the discussion below: http://r.789695.n4.nabble.com/Pairwise-correlation-tp4076963p4078114.html To unsubscribe from Pairwise correlation, click herehttp://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_codenode=4076963code=bXVzYWhhc3NAZ21haWwuY29tfDQwNzY5NjN8LTE5ODYxNDM0OTI= . NAMLhttp://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=macro_viewerid=instant_html%21nabble%3Aemail.namlbase=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.InstantMailNamespacebreadcrumbs=instant+emails%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml -- View this message in context: http://r.789695.n4.nabble.com/Pairwise-correlation-tp4076963p4078915.html Sent from the R help mailing list archive at Nabble.com. [[alternative HTML version
Re: [R] Pairwise correlation
Hi Michael, Here is a sample of the data. Gene Array1 Array2 Array3 Array4 Array5 Array6 Array7 Array8 Array9 Array10 Array11 Fth1 26016.01 23134.66 17445.71 39856.04 27245.45 23622.98 37887.75 49857.46 25864.73 21852.51 29198.4 B2m 7573.64 7768.52 6608.24 8571.65 6380.78 6242.76 6903.92 7330.63 7256.18 5678.21 10937.05 Tmsb4x 6192.44 4277.22 5024.59 4851.51 3062.55 4562.43 7948.1 5018.58 3200.17 2855.77 6139.23 H2-D1 3141.41 3986.06 3328.62 4726.6 3589.89 2885.95 7509.88 5257.62 4742.26 3431.33 5300.72 Prdx5 3935.7 3938.9 3401.68 4193.14 4028.95 3438.19 6640.15 5486.61 4424.57 3368.83 5265.92 I want to retain the gene names in the data. What you've proposed will take them out and I'll have to append them back to the results after the cor() On 17 November 2011 09:33, Michael Weylandt [via R] ml-node+s789695n4080177...@n4.nabble.com wrote: I think something like this should do it, but I can't test without data: rownames(mydata) - mydata[,1] # Put the elements in the first column as rownames mydata - mydata[,-1] # drop the things that are now rownames Michael On Thu, Nov 17, 2011 at 9:23 AM, Musa Hassan [hidden email]http://user/SendEmail.jtp?type=nodenode=4080177i=0 wrote: Hi Michael, Thanks for the response. I have noticed that the error occurred during my data read. It appears that the rownames (which when the data is transposed become my colnames) were converted to numbers instead of strings as they should be. The original header names don't change, just the rownames. I have to figure out how to import the data and have the strings not converted. Right now am using: mydata = read.csv(mydata.csv, headers=T,stringsAsFactors=F) then to convert the data frame to matrix mydata=data.matrix(mydata) Then I just do the correlation as Peter suggested. expression=cor(t(expression)) Thanks. On 17 November 2011 08:51, R. Michael Weylandt [hidden email]http://user/SendEmail.jtp?type=nodenode=4080177i=1 wrote: On Wed, Nov 16, 2011 at 11:22 PM, muzz56 [hidden email]http://user/SendEmail.jtp?type=nodenode=4080177i=2 wrote: Thanks to everyone who replied to my post, I finally got it to work. I am however not sure how well it worked since it run so quickly, but seems like I have a 2000 x 2000 data set. Behold the great and mighty power that is R! Don't worry -- on a decent machine the correlation of a 2k x 2k data set should be pretty fast. (It's about 9 seconds on my old-ish laptop with a bunch of other junk running) My followup questions would be, how do I get only pairs with say a certain pearson correlation value additionally it seems like my output didn't retain the headers but instead replaced them with numbers making it hard to know which gene pairs correlate. This is a little worrisome: R carries column names through cor() so this would suggest you weren't using them. Were your headers listed as part of your data (instead of being names)? If so, they would have been taken as numbers. Take a look at dimnames(NAMEOFDATA) -- if your headers aren't there, then they are being treated as data instead of numbers. If they are, can you provide some reproducible code and we can debug more fully. The easiest way to send data is to use the dput() function to get a copy-pasteable plain text representation. It would also be great if you could restrict it to a subset of your data rather than the full 4M data points, but if that's hard to do, don't worry. You should have expected behavior like X - matrix(1:9,3) colnames(X) - c(A,B,C) cor(X) # Prints with labels Michael On 16 November 2011 17:11, Nordlund, Dan (DSHS/RDA) [via R] [hidden email] http://user/SendEmail.jtp?type=nodenode=4080177i=3 wrote: -Original Message- From: [hidden email]http://user/SendEmail.jtp?type=nodenode=4078114i=0 [mailto: r-help-bounces@r- project.org] On Behalf Of muzz56 Sent: Wednesday, November 16, 2011 12:28 PM To: [hidden email]http://user/SendEmail.jtp?type=nodenode=4078114i=1 Subject: Re: [R] Pairwise correlation Thanks Peter. I tried this after reading in the csv (read.csv) and converted the data to matrix (as.matrix). But when I tried the correlation, I keeping getting the error (x must be numeric) yet when I view the data, its numeric. What does R tell you if you execute the following? str(x) Just because the data looks like it is numeric when it prints doesn't mean it is. Dan Daniel J. Nordlund Washington State Department of Social and Health Services Planning, Performance, and Accountability Research and Data Analysis Division Olympia, WA 98504-5204 __ [hidden email] http://user/SendEmail.jtp?type=nodenode=4078114i=2mailing list https://stat.ethz.ch/mailman/listinfo/r-help
Re: [R] Pairwise correlation
I can't see how it's stored like that and the email servers garble it up. Use dput() to create a plain text representation and paste that back in. Thanks, Michael On Thu, Nov 17, 2011 at 9:37 AM, muzz56 musah...@gmail.com wrote: Hi Michael, Here is a sample of the data. Gene Array1 Array2 Array3 Array4 Array5 Array6 Array7 Array8 Array9 Array10 Array11 Fth1 26016.01 23134.66 17445.71 39856.04 27245.45 23622.98 37887.75 49857.46 25864.73 21852.51 29198.4 B2m 7573.64 7768.52 6608.24 8571.65 6380.78 6242.76 6903.92 7330.63 7256.18 5678.21 10937.05 Tmsb4x 6192.44 4277.22 5024.59 4851.51 3062.55 4562.43 7948.1 5018.58 3200.17 2855.77 6139.23 H2-D1 3141.41 3986.06 3328.62 4726.6 3589.89 2885.95 7509.88 5257.62 4742.26 3431.33 5300.72 Prdx5 3935.7 3938.9 3401.68 4193.14 4028.95 3438.19 6640.15 5486.61 4424.57 3368.83 5265.92 I want to retain the gene names in the data. What you've proposed will take them out and I'll have to append them back to the results after the cor() On 17 November 2011 09:33, Michael Weylandt [via R] ml-node+s789695n4080177...@n4.nabble.com wrote: I think something like this should do it, but I can't test without data: rownames(mydata) - mydata[,1] # Put the elements in the first column as rownames mydata - mydata[,-1] # drop the things that are now rownames Michael On Thu, Nov 17, 2011 at 9:23 AM, Musa Hassan [hidden email]http://user/SendEmail.jtp?type=nodenode=4080177i=0 wrote: Hi Michael, Thanks for the response. I have noticed that the error occurred during my data read. It appears that the rownames (which when the data is transposed become my colnames) were converted to numbers instead of strings as they should be. The original header names don't change, just the rownames. I have to figure out how to import the data and have the strings not converted. Right now am using: mydata = read.csv(mydata.csv, headers=T,stringsAsFactors=F) then to convert the data frame to matrix mydata=data.matrix(mydata) Then I just do the correlation as Peter suggested. expression=cor(t(expression)) Thanks. On 17 November 2011 08:51, R. Michael Weylandt [hidden email]http://user/SendEmail.jtp?type=nodenode=4080177i=1 wrote: On Wed, Nov 16, 2011 at 11:22 PM, muzz56 [hidden email]http://user/SendEmail.jtp?type=nodenode=4080177i=2 wrote: Thanks to everyone who replied to my post, I finally got it to work. I am however not sure how well it worked since it run so quickly, but seems like I have a 2000 x 2000 data set. Behold the great and mighty power that is R! Don't worry -- on a decent machine the correlation of a 2k x 2k data set should be pretty fast. (It's about 9 seconds on my old-ish laptop with a bunch of other junk running) My followup questions would be, how do I get only pairs with say a certain pearson correlation value additionally it seems like my output didn't retain the headers but instead replaced them with numbers making it hard to know which gene pairs correlate. This is a little worrisome: R carries column names through cor() so this would suggest you weren't using them. Were your headers listed as part of your data (instead of being names)? If so, they would have been taken as numbers. Take a look at dimnames(NAMEOFDATA) -- if your headers aren't there, then they are being treated as data instead of numbers. If they are, can you provide some reproducible code and we can debug more fully. The easiest way to send data is to use the dput() function to get a copy-pasteable plain text representation. It would also be great if you could restrict it to a subset of your data rather than the full 4M data points, but if that's hard to do, don't worry. You should have expected behavior like X - matrix(1:9,3) colnames(X) - c(A,B,C) cor(X) # Prints with labels Michael On 16 November 2011 17:11, Nordlund, Dan (DSHS/RDA) [via R] [hidden email] http://user/SendEmail.jtp?type=nodenode=4080177i=3 wrote: -Original Message- From: [hidden email]http://user/SendEmail.jtp?type=nodenode=4078114i=0 [mailto: r-help-bounces@r- project.org] On Behalf Of muzz56 Sent: Wednesday, November 16, 2011 12:28 PM To: [hidden email]http://user/SendEmail.jtp?type=nodenode=4078114i=1 Subject: Re: [R] Pairwise correlation Thanks Peter. I tried this after reading in the csv (read.csv) and converted the data to matrix (as.matrix). But when I tried the correlation, I keeping getting the error (x must be numeric) yet when I view the data, its numeric. What does R tell you if you execute the following? str(x) Just because the data looks like it is numeric when it prints doesn't mean it is. Dan Daniel J. Nordlund Washington State Department of Social and Health Services Planning, Performance, and Accountability Research
Re: [R] Pairwise correlation
: -Original Message- From: [hidden email]http://user/SendEmail.jtp?type=nodenode=4078114i=0 [mailto: r-help-bounces@r- project.org] On Behalf Of muzz56 Sent: Wednesday, November 16, 2011 12:28 PM To: [hidden email]http://user/SendEmail.jtp?type=nodenode=4078114i=1 Subject: Re: [R] Pairwise correlation Thanks Peter. I tried this after reading in the csv (read.csv) and converted the data to matrix (as.matrix). But when I tried the correlation, I keeping getting the error (x must be numeric) yet when I view the data, its numeric. What does R tell you if you execute the following? str(x) Just because the data looks like it is numeric when it prints doesn't mean it is. Dan Daniel J. Nordlund Washington State Department of Social and Health Services Planning, Performance, and Accountability Research and Data Analysis Division Olympia, WA 98504-5204 __ [hidden email] http://user/SendEmail.jtp?type=nodenode=4078114i=2mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. -- If you reply to this email, your message will be added to the discussion below: http://r.789695.n4.nabble.com/Pairwise-correlation-tp4076963p4078114.html To unsubscribe from Pairwise correlation, click here . NAML http://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=macro_viewerid=instant_html%21nabble%3Aemail.namlbase=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.InstantMailNamespacebreadcrumbs=instant+emails%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml -- View this message in context: http://r.789695.n4.nabble.com/Pairwise-correlation-tp4076963p4078915.html Sent from the R help mailing list archive at Nabble.com. [[alternative HTML version deleted]] __ [hidden email] http://user/SendEmail.jtp?type=nodenode=4080177i=4mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. __ [hidden email] http://user/SendEmail.jtp?type=nodenode=4080177i=5mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. -- If you reply to this email, your message will be added to the discussion below: http://r.789695.n4.nabble.com/Pairwise-correlation-tp4076963p4080177.html To unsubscribe from Pairwise correlation, click herehttp://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_codenode=4076963code=bXVzYWhhc3NAZ21haWwuY29tfDQwNzY5NjN8LTE5ODYxNDM0OTI= . NAMLhttp://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=macro_viewerid=instant_html%21nabble%3Aemail.namlbase=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.InstantMailNamespacebreadcrumbs=instant+emails%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml -- View this message in context: http://r.789695.n4.nabble.com/Pairwise-correlation-tp4076963p4080194.html Sent from the R help mailing list archive at Nabble.com. [[alternative HTML version deleted]] __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] Pairwise correlation
On Wed, Nov 16, 2011 at 8:37 AM, muzz56 musah...@gmail.com wrote: Dear All, I am not familiar with R yet I want to use it to perform some task, hence my posting here. I hope someone can help. I have a set of data, genes (rows) and samples (columns). I want to do a Pearson correlation on all the possible pairwise combinations of all the genes (2000). Does anyone have an idea of how to execute this in R? Put the expression data in a matrix called expression Then simply execute correlations = cor(t(expression)) If you have missing data, use correlations = cor(t(expression), use = 'p') HTH Peter __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] Pairwise correlation
?cor X = matrix(rnorm(400),ncol = 4) cor(X) Michael On Wed, Nov 16, 2011 at 11:37 AM, muzz56 musah...@gmail.com wrote: Dear All, I am not familiar with R yet I want to use it to perform some task, hence my posting here. I hope someone can help. I have a set of data, genes (rows) and samples (columns). I want to do a Pearson correlation on all the possible pairwise combinations of all the genes (2000). Does anyone have an idea of how to execute this in R? Thanks in advance. -- View this message in context: http://r.789695.n4.nabble.com/Pairwise-correlation-tp4076963p4076963.html Sent from the R help mailing list archive at Nabble.com. __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] Pairwise correlation
Thanks Peter. I tried this after reading in the csv (read.csv) and converted the data to matrix (as.matrix). But when I tried the correlation, I keeping getting the error (x must be numeric) yet when I view the data, its numeric. On 16 November 2011 14:32, plangfelder [via R] ml-node+s789695n4077593...@n4.nabble.com wrote: On Wed, Nov 16, 2011 at 8:37 AM, muzz56 [hidden email]http://user/SendEmail.jtp?type=nodenode=4077593i=0 wrote: Dear All, I am not familiar with R yet I want to use it to perform some task, hence my posting here. I hope someone can help. I have a set of data, genes (rows) and samples (columns). I want to do a Pearson correlation on all the possible pairwise combinations of all the genes (2000). Does anyone have an idea of how to execute this in R? Put the expression data in a matrix called expression Then simply execute correlations = cor(t(expression)) If you have missing data, use correlations = cor(t(expression), use = 'p') HTH Peter __ [hidden email] http://user/SendEmail.jtp?type=nodenode=4077593i=1mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. -- If you reply to this email, your message will be added to the discussion below: http://r.789695.n4.nabble.com/Pairwise-correlation-tp4076963p4077593.html To unsubscribe from Pairwise correlation, click herehttp://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_codenode=4076963code=bXVzYWhhc3NAZ21haWwuY29tfDQwNzY5NjN8LTE5ODYxNDM0OTI= . NAMLhttp://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=macro_viewerid=instant_html%21nabble%3Aemail.namlbase=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.InstantMailNamespacebreadcrumbs=instant+emails%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml -- View this message in context: http://r.789695.n4.nabble.com/Pairwise-correlation-tp4076963p403.html Sent from the R help mailing list archive at Nabble.com. [[alternative HTML version deleted]] __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] Pairwise correlation
-Original Message- From: r-help-boun...@r-project.org [mailto:r-help-bounces@r- project.org] On Behalf Of muzz56 Sent: Wednesday, November 16, 2011 12:28 PM To: r-help@r-project.org Subject: Re: [R] Pairwise correlation Thanks Peter. I tried this after reading in the csv (read.csv) and converted the data to matrix (as.matrix). But when I tried the correlation, I keeping getting the error (x must be numeric) yet when I view the data, its numeric. What does R tell you if you execute the following? str(x) Just because the data looks like it is numeric when it prints doesn't mean it is. Dan Daniel J. Nordlund Washington State Department of Social and Health Services Planning, Performance, and Accountability Research and Data Analysis Division Olympia, WA 98504-5204 __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
Re: [R] Pairwise correlation
Thanks to everyone who replied to my post, I finally got it to work. I am however not sure how well it worked since it run so quickly, but seems like I have a 2000 x 2000 data set. My followup questions would be, how do I get only pairs with say a certain pearson correlation value additionally it seems like my output didn't retain the headers but instead replaced them with numbers making it hard to know which gene pairs correlate. On 16 November 2011 17:11, Nordlund, Dan (DSHS/RDA) [via R] ml-node+s789695n4078114...@n4.nabble.com wrote: -Original Message- From: [hidden email]http://user/SendEmail.jtp?type=nodenode=4078114i=0[mailto: r-help-bounces@r- project.org] On Behalf Of muzz56 Sent: Wednesday, November 16, 2011 12:28 PM To: [hidden email]http://user/SendEmail.jtp?type=nodenode=4078114i=1 Subject: Re: [R] Pairwise correlation Thanks Peter. I tried this after reading in the csv (read.csv) and converted the data to matrix (as.matrix). But when I tried the correlation, I keeping getting the error (x must be numeric) yet when I view the data, its numeric. What does R tell you if you execute the following? str(x) Just because the data looks like it is numeric when it prints doesn't mean it is. Dan Daniel J. Nordlund Washington State Department of Social and Health Services Planning, Performance, and Accountability Research and Data Analysis Division Olympia, WA 98504-5204 __ [hidden email] http://user/SendEmail.jtp?type=nodenode=4078114i=2mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code. -- If you reply to this email, your message will be added to the discussion below: http://r.789695.n4.nabble.com/Pairwise-correlation-tp4076963p4078114.html To unsubscribe from Pairwise correlation, click herehttp://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_codenode=4076963code=bXVzYWhhc3NAZ21haWwuY29tfDQwNzY5NjN8LTE5ODYxNDM0OTI= . NAMLhttp://r.789695.n4.nabble.com/template/NamlServlet.jtp?macro=macro_viewerid=instant_html%21nabble%3Aemail.namlbase=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.InstantMailNamespacebreadcrumbs=instant+emails%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml -- View this message in context: http://r.789695.n4.nabble.com/Pairwise-correlation-tp4076963p4078915.html Sent from the R help mailing list archive at Nabble.com. [[alternative HTML version deleted]] __ R-help@r-project.org mailing list https://stat.ethz.ch/mailman/listinfo/r-help PLEASE do read the posting guide http://www.R-project.org/posting-guide.html and provide commented, minimal, self-contained, reproducible code.
