This is maybe the best rack to use on the same hillborne with V-brakes.
Depending on the v-brake you just need to get the tomestone fiving board
into the fork crown hole. I suggest going over the brake cabling.
I've also seen Nitto canti racks as well, but that is more variant
depending on brake arm lengths etc.
On Tuesday, June 18, 2019 at 5:22:09 PM UTC-4, Dave Redmon wrote:
>
> How doable is it to fit a Mark's rack on the front of a Sam Hillborne with
> V brakes? What type and length of support legs? What's a good source for
> legs? I have the rack and four legs--two straight at 23 cm and two curved
> at 14 cm. This is a used set up I purchased recently.
>
> Dave in Kansas
>
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbw-owners-bunch/d70f04d7-509d-4e09-b250-db7623305d0e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
