Hey! I'm not an expert at all, but I did successfully swap out bars and
change out a trigger index shifter for a friction thumbie this summer. My
answer would be that yes, it would be a good idea to get new cables and
housings for the drop setup. The incidentals kits that Riv sells are great,
btw. Could I have reused the shifter cable? Maybe...the issue, though, is
that even a VERY clean snip of a cable could have a frayed wire...a frayed
wire will not pass through a housing when it comes time to set up the
brakes and shifters. I actually REALLY screwed up with my first attempt
(wrong cable pass under the BB) and had already snipped and capped the end
of the derailer cable)...so I had to pull it back out and redo it...capping
the cable caused it to fray a little, so I I trimmed it again to get a
clean cut, crossed my fingers and held my breath, and re-routed the cable
through the shifter, front end housing, and through the derailer housing
and it thankfully worked.
The bigger issue is he might need more cable in a drops setup than in his
current setup...and that calls for a new cable.
I'm rambling...but I just think it's better to have a fresh cable that will
definitely be long enough.
On Saturday, September 12, 2020 at 10:30:23 AM UTC-5 markt...@gmail.com
wrote:
> In the vein of there are no stupid questions: My son recently bought a new
> Handsome Cycles Devil and is thinking about switching from flat to drop
> bars. He's wondering if he'll need new brake and shifter cables. I told
> him that I thought he'd probably need new cables for both since he'll be
> switching to new brake levers and a new rear shifter. But I don't really
> know.(It's an 8-speed bike.)
>
> In the Wanting to Buy department, does anyone have a surplus pair of
> shifters suitable for drop bars? Also, looking for bar end shifters.
>
> My son lives in Brooklyn, so if any of you are somewhat local to him, that
> would be ideal.
>
> Thanks in advance,
> Mark Taintor
> Chanhassen, MN
>
>
>
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbw-owners-bunch/f71f8460-a05a-4ea1-be61-3103fe16a69cn%40googlegroups.com.