[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

[somervillebikes]

I've used generic spray glues, can't think of any brand names. Maybe Ace 
brand... anyway it always works well for a year or so then loosens and I 
repeat. I suppose that might be better than the permanent stuff that forces 
you to chip away a cork bits when you want to remove them.

Anton
velolumino.com

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/c9cbd566-f5a5-460b-9a4f-9e8f95489b47o%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

['John Phillips' via RBW Owners Bunch]

Hi Jim,

   Would you guess you use a strip of Newbaum's somewhere between 1/2 the 
length of the cork grip and the full length of the grip?

John

On Wednesday, July 15, 2020 at 1:58:20 PM UTC-7, Jim S. wrote:
>
> John, I just use a strip length-wise under the grip. You could try one on 
> the top and one on the bottom, if one strip alone isn't tight enough. I 
> can't figure out why, but the length of the strip matters. A longer strip 
> seems to hold it in place more than a shorter one, but I"ve had it where if 
> I make the strip too long, I can't get the grip on to the bar. So there's a 
> sweet spot.
>
> On Wednesday, July 15, 2020 at 2:29:49 PM UTC-5 John Phillips wrote:
>
>> Hi Jim,
>>
>>  Are you using one strip of Newbaum's on the handlebar length-wise 
>> under the grip, or wrapping a strip of Newbaum's around the bar under the 
>> grip?
>>
>> If I could get cork grips to work without glue, that would be fantastic.
>>
>> Thanks,
>>
>> John
>>
>> On Wednesday, July 15, 2020 at 5:58:34 AM UTC-7, Jim S. wrote:
>>>
>>> John, I've had success with a strip of newbaum's tape. No glue, no 
>>> nothing else. If you don't have enough tape, they'll rotate. If you use too 
>>> much tape,  you can't get the grips on. But you'll figure out an amount 
>>> that holds the grips in place. Then you can remove the grips later without 
>>> needing a blow torch.
>>>
>>> On Monday, July 13, 2020 at 12:19:26 PM UTC-5 John Phillips wrote:
>>>
   Do you have a favorite adhesive you use to keep them from rotating?

 Thanks,

 John

>>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/227c16a8-d3ac-4f39-922b-8976f74c4e3co%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

[Jim S.]

John, I just use a strip length-wise under the grip. You could try one on 
the top and one on the bottom, if one strip alone isn't tight enough. I 
can't figure out why, but the length of the strip matters. A longer strip 
seems to hold it in place more than a shorter one, but I"ve had it where if 
I make the strip too long, I can't get the grip on to the bar. So there's a 
sweet spot.

On Wednesday, July 15, 2020 at 2:29:49 PM UTC-5 John Phillips wrote:

> Hi Jim,
>
>  Are you using one strip of Newbaum's on the handlebar length-wise 
> under the grip, or wrapping a strip of Newbaum's around the bar under the 
> grip?
>
> If I could get cork grips to work without glue, that would be fantastic.
>
> Thanks,
>
> John
>
> On Wednesday, July 15, 2020 at 5:58:34 AM UTC-7, Jim S. wrote:
>>
>> John, I've had success with a strip of newbaum's tape. No glue, no 
>> nothing else. If you don't have enough tape, they'll rotate. If you use too 
>> much tape,  you can't get the grips on. But you'll figure out an amount 
>> that holds the grips in place. Then you can remove the grips later without 
>> needing a blow torch.
>>
>> On Monday, July 13, 2020 at 12:19:26 PM UTC-5 John Phillips wrote:
>>
>>>   Do you have a favorite adhesive you use to keep them from rotating?
>>>
>>> Thanks,
>>>
>>> John
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/9fab5634-307a-4efd-9f2f-f18120f36370n%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

['John Phillips' via RBW Owners Bunch]

Hi Jim,

 Are you using one strip of Newbaum's on the handlebar length-wise 
under the grip, or wrapping a strip of Newbaum's around the bar under the 
grip?

If I could get cork grips to work without glue, that would be fantastic.

Thanks,

John

On Wednesday, July 15, 2020 at 5:58:34 AM UTC-7, Jim S. wrote:
>
> John, I've had success with a strip of newbaum's tape. No glue, no nothing 
> else. If you don't have enough tape, they'll rotate. If you use too much 
> tape,  you can't get the grips on. But you'll figure out an amount that 
> holds the grips in place. Then you can remove the grips later without 
> needing a blow torch.
>
> On Monday, July 13, 2020 at 12:19:26 PM UTC-5 John Phillips wrote:
>
>>   Do you have a favorite adhesive you use to keep them from rotating?
>>
>> Thanks,
>>
>> John
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/f22644e0-e47e-4a9b-a199-f4e101b0d4d2o%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

[Ray Varella]

Thanks Benz. 
I’ll keep that in mind. 

Ray

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/42163fe3-4d01-4ff3-90e3-22454462cd5co%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

[Jim S.]

John, I've had success with a strip of newbaum's tape. No glue, no nothing 
else. If you don't have enough tape, they'll rotate. If you use too much 
tape,  you can't get the grips on. But you'll figure out an amount that 
holds the grips in place. Then you can remove the grips later without 
needing a blow torch.

On Monday, July 13, 2020 at 12:19:26 PM UTC-5 John Phillips wrote:

>   Do you have a favorite adhesive you use to keep them from rotating?
>
> Thanks,
>
> John
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/ae90e399-2cc2-4c3d-a98e-029e095f625dn%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

[Michael Baquerizo]

i've seen that glue referenced before (household hogar) and just wanted to 
let everyone know that hogar is just household in spanish, hah.

On Tuesday, July 14, 2020 at 7:10:03 PM UTC-4 Ginz wrote:

> Amazing Goop “houshold” aka “household hogar”. It is Contact cement. Cork 
> breaks up as you remove it but not terribly so. Heat gun would probably 
> help. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/f1e50c32-26f8-4bbf-b245-7828876743d9n%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

[Ginz]

Amazing Goop “houshold” aka “household hogar”.  It is Contact cement. Cork 
breaks up as you remove it but not terribly so. Heat gun would probably help. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/d83d0412-ce73-437b-b9cc-956a85ee0371o%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

[Benz Ouyang, Sunnyvale, CA]

On Tuesday, July 14, 2020 at 1:38:33 PM UTC-7, Ray Varella wrote:
>
> …If anyone has a solution to soften these adhesives, please share it.
>

Goo gone  is purported to work. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/d399ff15-69cc-4f3c-ad52-1e639c3b41a1o%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

[Ray Varella]

Super 77 and the super 90 are permanent and you will have to pick the cork off 
in little bits to remove the grips. 

If anyone has a solution to soften these adhesives, please share it. 

Like James said, they will never slip. 

Ray

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/58cde773-159c-4add-a815-a5b06f569e4bo%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

['John Phillips' via RBW Owners Bunch]

Thank you everyone, that's a big help!

John

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/586370c5-29ca-4d7a-b731-7dd6ae4713fbo%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

[James / Analog Cycles]

Super 77 spray glue.   Way less expansive than Gorilla Glue.  Wait for it 
to set up for 30 seconds then slip on.  Some will squirt out, just have a 
rag handy.  You need a good coating, but that's any glue.  We have glued 
hundreds of grips on using that spray glue.  Never slips.  

-James / Analog Cycles



On Monday, July 13, 2020 at 1:19:26 PM UTC-4, John Phillips wrote:
>
>   Do you have a favorite adhesive you use to keep them from rotating?
>
> Thanks,
>
> John
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/99a394b9-75de-4200-b242-ae3c8f18802do%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

[Brian Campbell]

The super glue. I haven't timed myself but sliding a grip on  does not take 
45 seconds. Also the working time is an estimate.

On Monday, July 13, 2020 at 7:12:34 PM UTC-4, John Phillips wrote:
>
> Hi Brian, 
>
>Do you mean the clear Gorilla Glue, or the clear Gorilla Super Glue. 
> The super glue says it only gives you 10-45 seconds of working time.
>
> Thanks,
>
> John
>
> On Monday, July 13, 2020 at 10:55:07 AM UTC-7, Brian Campbell wrote:
>>
>> Piece of cloth tape on the handle bar and some Gorilla brand Super Glue. 
>> Not the kind the expands as it dries. 
>>
>> On Monday, July 13, 2020 at 1:19:26 PM UTC-4, John Phillips wrote:
>>>
>>>   Do you have a favorite adhesive you use to keep them from rotating?
>>>
>>> Thanks,
>>>
>>> John
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/75d62aea-2589-464c-b1d4-3ba2452fdbb9o%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

['John Phillips' via RBW Owners Bunch]

Hi Brian, 

   Do you mean the clear Gorilla Glue, or the clear Gorilla Super Glue. The 
super glue says it only gives you 10-45 seconds of working time.

Thanks,

John

On Monday, July 13, 2020 at 10:55:07 AM UTC-7, Brian Campbell wrote:
>
> Piece of cloth tape on the handle bar and some Gorilla brand Super Glue. 
> Not the kind the expands as it dries. 
>
> On Monday, July 13, 2020 at 1:19:26 PM UTC-4, John Phillips wrote:
>>
>>   Do you have a favorite adhesive you use to keep them from rotating?
>>
>> Thanks,
>>
>> John
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/59d359ef-fdd5-460e-8b13-a0ec2ae741feo%40googlegroups.com.

[RBW] Re: Your Favorite Adhesive for Riv Cork Grips???

[Brian Campbell]

Piece of cloth tape on the handle bar and some Gorilla brand Super Glue. 
Not the kind the expands as it dries. 

On Monday, July 13, 2020 at 1:19:26 PM UTC-4, John Phillips wrote:
>
>   Do you have a favorite adhesive you use to keep them from rotating?
>
> Thanks,
>
> John
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/aa7e87c7-02e9-4985-a355-8a1427c69ae9o%40googlegroups.com.