As for the Simpliphi I have them in a few projects one being Governor Browns offgrid home and my own off-grid residence is powered using them. I recently re-engineered the Outback IBR3 for the phi 3.5 and made an advanced version for my own. I purchased a flexnet battery monitor and used all three channels for the IBR I have a spare Flexmax80 that powers a hub 4 and a second mate 3. You are able to aggregate this data into optics and overlay the two. I’ll admit I haven’t had a lot of time to tweak with it but I think you can see it as an optics preview through outback.
I agree data on the Lifpo4 is critical and my understanding is Simpliphi will be releasing a version soon that has comms. I also have a Discover AES bank on my off grid woodshop consisting of 4 of the 6.5 coupled with three of the older xantrex xw inverters this is a great platform so far and you can see the battery as a device on the scp, you can also direct connect using a usb to usb cable to the battery and upload firmware and see the battery specifics Jason Andrade West Coast Sustainables Sent from my iPhone > On Jan 23, 2019, at 2:21 PM, re-wrenches-requ...@lists.re-wrenches.org wrote: > > Message: 1 > Date: Wed, 23 Jan 2019 16:08:55 -0600 > From: Darryl Thayer <darylsol...@gmail.com> > To: offgridso...@sti.net, newrewrenches > <RE-wrenches@lists.re-wrenches.org> > Subject: Re: [RE-wrenches] Aquion Batteries > Message-ID: > <CAHsrUiS+GycYp7xov4SCHHYGjdZ9=RDgLf1izqLV=k38gzz...@mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > I have used Simphiphy. Had a problem over time nearly 2 years the cells > were what appears to be out of balance. I think i balanced them by setting > the charge voltage higher than recomended. I think the factory has it wrong > > On Wed, Jan 23, 2019, 1:39 PM Dave Angelini Offgrid Solar < > offgridso...@sti.net wrote: > >> Simplyphi does not have a built in method for Soc. The BMS works well but >> the install requires an energy monitor with a shunt. Too much work for me >> and my clients. Their batteries are too small at 3.5 kwh or so. If they >> changed the size up, and got Soc out to OUtback or Schneider I would use >> them. >> >> Dave Angelini Offgrid Solar >> "we go where powerlines don't" >> http://members.sti.net/offgridsolar/ >> e-mail offgridso...@sti.net >> text 209 813 0060 >> >>> Awhile back, it was mentioned that missmatched cell voltages could be >>> corrected with a 6 volt charger attached to each low layer. I tried this >>> on one and it worked. I have several stacks that have mostly even >>> voltages >>> with one cell over charged. Often 8 to 25 volts. Some showed the high >>> voltage layer when under charge but looked normal when static. Others >> had >>> the high voltage even when static. Are these layers just totally >>> defective >>> or could the voltage be bled off somehow down to the average. Has anyone >>> tried this. I have three customers with Aquions that are working well >>> and >>> staying balanced. This customer has 24 batteries and 13 show this >>> problem. >>> Capacity of the bank is very poor. Customer is ready to call lawyer! >> Any >>> ideas? >>> Tump, yes these include the batteries from Maine but also half of his >>> original 12 are showing the same problem. >>> >>> John Blittersdorf. >>> CV Wind Service (and Solar) >>> 200 West Road >>> N Chittenden, VT 05763 >>> 802-770-8625 Sent from my iPhone > On Jan 24, 2019, at 2:04 PM, re-wrenches-requ...@lists.re-wrenches.org wrote: > > Re: Aquion Batteries
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org