Re: [RE-wrenches] Enphase installer compensation M-190's discontinued

2017-07-06 Thread Chris Schaefer 
I dumped Enphase this season for APS. Simply put, half the equipment with
almost half the time to install. and a much lower cost point. If anyone is
at InterSolar I suggest lighting up the Enphase reps about the M190 issue.
Make some noise. Then step over to the APS booth.

Christopher

Chris Schaefer’s


*Tel/Fax 585-229-2083 or Cell 585-748-1870 *
*5115 South Hill Road ~ Canandaigua New York 14424**www.solarandwindfx.com
 ~ E-mail: ch...@solarandwindfx.com
*


Thomas Jefferson, the author of our great Constitution, once said,
"democracy" will cease to exist when you take away from those who are
willing to work and give to those who would not."

On Thu, Jul 6, 2017 at 3:21 PM, Jason Szumlanski <
ja...@floridasolardesigngroup.com> wrote:

> Correction - I think it started at 15 years with labor included. I don't
> see how they can renege on that now. In fact, they had a power guarantee,
> too. They would reimburse people for lost energy as a result of warranty
> issues.
>
> Jason
>
> On Thu, Jul 6, 2017 at 3:02 PM, Jason Szumlanski  floridasolardesigngroup.com> wrote:
>
>> This seems odd. I thought they had a 25 year warranty originally with
>> labor compensation, then went to 15 year at some point with no labor
>> compensation. We have lots of M190s out there that were sold with labor
>> coverage, so this would be important to know for certain.
>>
>>
>> Jason
>>
>>
>>
>> On Thu, Jul 6, 2017 at 2:52 PM,  wrote:
>>
>>> Hi all,
>>>For those who have installed M-190's, Enphase has now discontinued as
>>> of June 1st any installer compensation for replacing failed
>>> microinverters with that designation. We have a system we installed in
>>> 2011 that I found out today, after replacing the three failed M-190's,
>>> that I was on my own.fyi
>>>
>>> Daryl
>>> Penobscot Solar Design
>>>
>>>
>
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
> org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>


-- 

Chris Schaefer’s


*Tel/Fax 585-229-2083 or Cell 585-748-1870 *
*5115 South Hill Road ~ Canandaigua New York 14424**www.solarandwindfx.com
 ~ E-mail: ch...@solarandwindfx.com
*


Thomas Jefferson, the author of our great Constitution, once said,
"democracy" will cease to exist when you take away from those who are
willing to work and give to those who would not."
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Enphase installer compensation M-190's discontinued

2017-07-06 Thread Jason Szumlanski 
Correction - I think it started at 15 years with labor included. I don't
see how they can renege on that now. In fact, they had a power guarantee,
too. They would reimburse people for lost energy as a result of warranty
issues.

Jason

On Thu, Jul 6, 2017 at 3:02 PM, Jason Szumlanski <
ja...@floridasolardesigngroup.com> wrote:

> This seems odd. I thought they had a 25 year warranty originally with
> labor compensation, then went to 15 year at some point with no labor
> compensation. We have lots of M190s out there that were sold with labor
> coverage, so this would be important to know for certain.
>
>
> Jason
>
>
>
> On Thu, Jul 6, 2017 at 2:52 PM,  wrote:
>
>> Hi all,
>>For those who have installed M-190's, Enphase has now discontinued as
>> of June 1st any installer compensation for replacing failed
>> microinverters with that designation. We have a system we installed in
>> 2011 that I found out today, after replacing the three failed M-190's,
>> that I was on my own.fyi
>>
>> Daryl
>> Penobscot Solar Design
>>
>>
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Enphase installer compensation M-190's discontinued

2017-07-06 Thread penobscotsolar 
I believe that I found out for certain. I spoke to two different people at
Enphase and was "assured" that I would not be compensated as of June 1,
2017 for any M-190 replacements. I told them I would be purchasing
SolarEdge, not Enphase, from now on until they felt that, as I do, they
were breaking their part of the bargain.

Daryl


> This seems odd. I thought they had a 25 year warranty originally with
> labor
> compensation, then went to 15 year at some point with no labor
> compensation. We have lots of M190s out there that were sold with labor
> coverage, so this would be important to know for certain.
>
>
> Jason
>
>
>
> On Thu, Jul 6, 2017 at 2:52 PM,  wrote:
>
>> Hi all,
>>For those who have installed M-190's, Enphase has now discontinued as
>> of June 1st any installer compensation for replacing failed
>> microinverters with that designation. We have a system we installed in
>> 2011 that I found out today, after replacing the three failed M-190's,
>> that I was on my own.fyi
>>
>> Daryl
>> Penobscot Solar Design
>>
>>
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>


___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Re: [RE-wrenches] Enphase installer compensation M-190's discontinued

2017-07-06 Thread Jason Szumlanski 
This seems odd. I thought they had a 25 year warranty originally with labor
compensation, then went to 15 year at some point with no labor
compensation. We have lots of M190s out there that were sold with labor
coverage, so this would be important to know for certain.


Jason



On Thu, Jul 6, 2017 at 2:52 PM,  wrote:

> Hi all,
>For those who have installed M-190's, Enphase has now discontinued as
> of June 1st any installer compensation for replacing failed
> microinverters with that designation. We have a system we installed in
> 2011 that I found out today, after replacing the three failed M-190's,
> that I was on my own.fyi
>
> Daryl
> Penobscot Solar Design
>
>
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

[RE-wrenches] Enphase installer compensation M-190's discontinued

2017-07-06 Thread penobscotsolar 
Hi all,
   For those who have installed M-190's, Enphase has now discontinued as
of June 1st any installer compensation for replacing failed
microinverters with that designation. We have a system we installed in
2011 that I found out today, after replacing the three failed M-190's,
that I was on my own.fyi

Daryl
Penobscot Solar Design



___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org