Re: [RE-wrenches] M210 Enphase

2018-07-30 Thread William Dorsett
We’ve had remarkable good response from Enphase replacing old inverters.  With 
swelling and oozing…none have done that yet though I should make the rounds to 
check. In our early systems we batched as many inverters as possible under a 
single module (i.e. on a double row, with both pairs of inverters under the 
bottom row) so our return visits and replacements would be kept as simple as 
possible. I think it is still a good idea. We’ve had some where the trunk line 
connectors haven’t been tightly connected, but I think the new IQ 6 and 7’s are 
much more fool proof in all ways and I remain quite optimistic.
 
Bill Dorsett
“Start where you are. Use what you have. Do what you can” Arthur Ashe
1715 Leavenworth
Manhattan, KS  66502
www.fhreec.org <http://www.fhreec.org/> 
 
785/539-1956  Office 
785/564-2583  Cell
wmdors...@cox.net <mailto:wmdors...@cox.net> 
 
From: RE-wrenches  On Behalf Of Ron 
Young
Sent: Monday, July 30, 2018 2:54 PM
To: RE-wrenches 
Subject: Re: [RE-wrenches] M210 Enphase
 
Good to know August and Bill, I’ll put in a call today.
 
Ron
earthRight Solar - Solareagle.com <http://Solareagle.com> 



On Jul 30, 2018, at 8:40 AM, August Goers mailto:aug...@luminalt.com> > wrote:
 
We have many M210 and M190 micros installed and deal with replacements 
frequently. If you're seeing physical signs of oozing or swelling, it's only a 
matter of time before they stop working. Enphase should replace them under 
warranty, especially if you explain that now is the time to get them swapped 
and show them the pics.
 
August
Luminalt
 
On Sat, Jul 28, 2018 at 8:08 AM Bill Hennessy mailto:b...@berkssolar.com> > wrote:
Ron, Give Enphase a call; replacements are usually sent without a hassle. They 
have a lot of experience replacing their older inverters. 



regards, bill
 
Bill Hennessy
Berks Solar, LLC
371 Centennial Rd
Mertztown, PA 19539

o 610 682 4300
c 484 560 4666
NABCEP certified installer
PA contractor #44411
www.berkssolar.com <http://www.berkssolar.com/> 
 

  _  

From: RM You mailto:solarea...@solareagle.com> >
To: RE-wrenches mailto:re-wrenches@lists.re-wrenches.org> > 
Sent: Friday, July 27, 2018 9:46 PM
Subject: [RE-wrenches] M210 Enphase
 
Anyone have a source of M210 Enphase inverters? I have a customer who has 3 out 
of 12 that are leaking and as he is getting his roof re-done would like to 
replace those before problems occur. They are still working properly but I 
don’t know the likelihood of failure. I could replace them with 215’s but the 
trunk cable plugs are different so would have to run a separate trunk cable for 
just those 3 unless there is an adapter. Any suggestions wildly appreciated ;) !
 
Ron
earthRight Solar - Solareagle.com <http://Solareagle.com> 
___
List sponsored by Redwood Alliance
 
List Address: RE-wrenches@lists.re-wrenches.org 
<mailto:RE-wrenches@lists.re-wrenches.org> 
 
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
 
List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
 
List rules & etiquette:
www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> 
 
Check out or update participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org/> 
 
 
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org 
<mailto:RE-wrenches@lists.re-wrenches.org> 

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> 

Check out or update participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org/> 
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org 
<mailto:RE-wrenches@lists.re-wrenches.org> 

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> 

Check out or update participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org> 
 
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org



Re: [RE-wrenches] M210 Enphase

2018-07-30 Thread Ron Young
Good to know August and Bill, I’ll put in a call today.

Ron
earthRight Solar - Solareagle.com

> On Jul 30, 2018, at 8:40 AM, August Goers  wrote:
> 
> We have many M210 and M190 micros installed and deal with replacements 
> frequently. If you're seeing physical signs of oozing or swelling, it's only 
> a matter of time before they stop working. Enphase should replace them under 
> warranty, especially if you explain that now is the time to get them swapped 
> and show them the pics.
> 
> August
> Luminalt
> 
> On Sat, Jul 28, 2018 at 8:08 AM Bill Hennessy  <mailto:b...@berkssolar.com>> wrote:
> Ron, Give Enphase a call; replacements are usually sent without a hassle. 
> They have a lot of experience replacing their older inverters. 
> 
> regards, bill
>  
> Bill Hennessy
> Berks Solar, LLC
> 371 Centennial Rd
> Mertztown, PA 19539
> 
> o 610 682 4300
> c 484 560 4666
> NABCEP certified installer
> PA contractor #44411
> www.berkssolar.com <http://www.berkssolar.com/>
> 
> 
> From: RM You mailto:solarea...@solareagle.com>>
> To: RE-wrenches  <mailto:re-wrenches@lists.re-wrenches.org>> 
> Sent: Friday, July 27, 2018 9:46 PM
> Subject: [RE-wrenches] M210 Enphase
> 
> Anyone have a source of M210 Enphase inverters? I have a customer who has 3 
> out of 12 that are leaking and as he is getting his roof re-done would like 
> to replace those before problems occur. They are still working properly but I 
> don’t know the likelihood of failure. I could replace them with 215’s but the 
> trunk cable plugs are different so would have to run a separate trunk cable 
> for just those 3 unless there is an adapter. Any suggestions wildly 
> appreciated ;) !
> 
> Ron
> earthRight Solar - Solareagle.com
> ___
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org 
> <mailto:RE-wrenches@lists.re-wrenches.org>
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org 
> <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html 
> <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
> 
> Check out or update participant bios:
> www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
> 
> 
> 
> ___
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org 
> <mailto:RE-wrenches@lists.re-wrenches.org>
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org 
> <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html 
> <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
> 
> Check out or update participant bios:
> www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
> 
> ___
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 

___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org



Re: [RE-wrenches] M210 Enphase

2018-07-30 Thread August Goers
We have many M210 and M190 micros installed and deal with replacements
frequently. If you're seeing physical signs of oozing or swelling, it's
only a matter of time before they stop working. Enphase should replace them
under warranty, especially if you explain that now is the time to get them
swapped and show them the pics.

August
Luminalt

On Sat, Jul 28, 2018 at 8:08 AM Bill Hennessy  wrote:

> Ron, Give Enphase a call; replacements are usually sent without a hassle.
> They have a lot of experience replacing their older inverters.
>
> regards, bill
>
> Bill Hennessy
> Berks Solar, LLC
> 371 Centennial Rd
> Mertztown, PA 19539
>
> o 610 682 4300
> c 484 560 4666
> NABCEP certified installer
> PA contractor #44411
> www.berkssolar.com
>
>
> --
> *From:* RM You 
> *To:* RE-wrenches 
> *Sent:* Friday, July 27, 2018 9:46 PM
> *Subject:* [RE-wrenches] M210 Enphase
>
> Anyone have a source of M210 Enphase inverters? I have a customer who has
> 3 out of 12 that are leaking and as he is getting his roof re-done would
> like to replace those before problems occur. They are still working
> properly but I don’t know the likelihood of failure. I could replace them
> with 215’s but the trunk cable plugs are different so would have to run a
> separate trunk cable for just those 3 unless there is an adapter. Any
> suggestions wildly appreciated ;) !
>
> Ron
> earthRight Solar - Solareagle.com
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org



Re: [RE-wrenches] M210 Enphase

2018-07-28 Thread Bill Hennessy
Ron, Give Enphase a call; replacements are usually sent without a hassle. They 
have a lot of experience replacing their older inverters. 

regards, bill Bill Hennessy
Berks Solar, LLC
371 Centennial Rd
Mertztown, PA 19539

o 610 682 4300
c 484 560 4666
NABCEP certified installer
PA contractor #44411
www.berkssolar.com

  From: RM You 
 To: RE-wrenches  
 Sent: Friday, July 27, 2018 9:46 PM
 Subject: [RE-wrenches] M210 Enphase
   
Anyone have a source of M210 Enphase inverters? I have a customer who has 3 out 
of 12 that are leaking and as he is getting his roof re-done would like to 
replace those before problems occur. They are still working properly but I 
don’t know the likelihood of failure. I could replace them with 215’s but the 
trunk cable plugs are different so would have to run a separate trunk cable for 
just those 3 unless there is an adapter. Any suggestions wildly appreciated ;) !

Ron
earthRight Solar - Solareagle.com
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org



   ___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org



Re: [RE-wrenches] M210 Enphase

2018-07-28 Thread Jay
Yea sure seems like a warranty issue to me. 
Let us know how enphase deals with it. 

Jay 

> On Jul 27, 2018, at 11:55 PM, Ron Young  wrote:
> 
> Hi Jay, there is a black tar like substance leaking out of the seams on two 
> inverters and from around the connection wire on a third. It’s not a lot but 
> seems like it shouldn’t be happening. There are 12 inverters in the array.
> 
> 
> 
> 
> 
>> On Jul 27, 2018, at 6:51 PM, jay  wrote:
>> 
>> HI Ron,
>> 
>> Leaking what?
>> 
>> jay
>> 
>> peltz power
>> 
>>> On Jul 27, 2018, at 6:46 PM, RM You  wrote:
>>> 
>>> Anyone have a source of M210 Enphase inverters? I have a customer who has 3 
>>> out of 12 that are leaking and as he is getting his roof re-done would like 
>>> to replace those before problems occur. They are still working properly but 
>>> I don’t know the likelihood of failure. I could replace them with 215’s but 
>>> the trunk cable plugs are different so would have to run a separate trunk 
>>> cable for just those 3 unless there is an adapter. Any suggestions wildly 
>>> appreciated ;) !
>>> 
>>> Ron
>>> earthRight Solar - Solareagle.com
>>> ___
>>> List sponsored by Redwood Alliance
>>> 
>>> List Address: RE-wrenches@lists.re-wrenches.org
>>> 
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>> 
>>> List-Archive: 
>>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>> 
>>> List rules & etiquette:
>>> www.re-wrenches.org/etiquette.htm
>>> 
>>> Check out or update participant bios:
>>> www.members.re-wrenches.org
>>> 
>> 
>> ___
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches@lists.re-wrenches.org
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: 
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>> 
> 
> ___
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org



Re: [RE-wrenches] M210 Enphase

2018-07-28 Thread Ron Young
Hi Jay, there is a black tar like substance leaking out of the seams on two 
inverters and from around the connection wire on a third. It’s not a lot but 
seems like it shouldn’t be happening. There are 12 inverters in the array.





> On Jul 27, 2018, at 6:51 PM, jay  > wrote:
> 
> HI Ron,
> 
> Leaking what?
> 
> jay
> 
> peltz power
> 
>> On Jul 27, 2018, at 6:46 PM, RM You > > wrote:
>> 
>> Anyone have a source of M210 Enphase inverters? I have a customer who has 3 
>> out of 12 that are leaking and as he is getting his roof re-done would like 
>> to replace those before problems occur. They are still working properly but 
>> I don’t know the likelihood of failure. I could replace them with 215’s but 
>> the trunk cable plugs are different so would have to run a separate trunk 
>> cable for just those 3 unless there is an adapter. Any suggestions wildly 
>> appreciated ;) !
>> 
>> Ron
>> earthRight Solar - Solareagle.com 
>> ___
>> List sponsored by Redwood Alliance
>> 
>> List Address: RE-wrenches@lists.re-wrenches.org 
>> 
>> 
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org 
>> 
>> 
>> List-Archive: 
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>> 
> 
> ___
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org 
> 
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org 
> 
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 

___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org



Re: [RE-wrenches] M210 Enphase

2018-07-27 Thread jay
HI Ron,

Leaking what?

jay

peltz power

> On Jul 27, 2018, at 6:46 PM, RM You  wrote:
> 
> Anyone have a source of M210 Enphase inverters? I have a customer who has 3 
> out of 12 that are leaking and as he is getting his roof re-done would like 
> to replace those before problems occur. They are still working properly but I 
> don’t know the likelihood of failure. I could replace them with 215’s but the 
> trunk cable plugs are different so would have to run a separate trunk cable 
> for just those 3 unless there is an adapter. Any suggestions wildly 
> appreciated ;) !
> 
> Ron
> earthRight Solar - Solareagle.com
> ___
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 

___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org



Re: [RE-wrenches] M210 Enphase

2018-07-27 Thread William Miller
Ron:

I have received replacement inverters from Enphase with non-standard
connectors to fit older installations.  I would check with Enphase on
options for inverters that may be newer but have the older plugs, or for
adapters.

William


Lic 773985
millersolar.com
805-438-5600

-Original Message-
From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On
Behalf Of RM You
Sent: Friday, July 27, 2018 6:46 PM
To: RE-wrenches
Subject: [RE-wrenches] M210 Enphase

Anyone have a source of M210 Enphase inverters? I have a customer who has 3
out of 12 that are leaking and as he is getting his roof re-done would like
to replace those before problems occur. They are still working properly but
I don’t know the likelihood of failure. I could replace them with 215’s but
the trunk cable plugs are different so would have to run a separate trunk
cable for just those 3 unless there is an adapter. Any suggestions wildly
appreciated ;) !

Ron
earthRight Solar - Solareagle.com
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org



[RE-wrenches] M210 Enphase

2018-07-27 Thread RM You
Anyone have a source of M210 Enphase inverters? I have a customer who has 3 out 
of 12 that are leaking and as he is getting his roof re-done would like to 
replace those before problems occur. They are still working properly but I 
don’t know the likelihood of failure. I could replace them with 215’s but the 
trunk cable plugs are different so would have to run a separate trunk cable for 
just those 3 unless there is an adapter. Any suggestions wildly appreciated ;) !

Ron
earthRight Solar - Solareagle.com
___
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org