Re: [Repeater-Builder] Re: Aviation Problem Returns, Need Some Help, or a Tuned Stub
Bob Dengler wrote: At 4/10/2006 02:13 PM, you wrote: Tuning the transmitter fixes, filters mask. Unfortunately without a spectrum analyzer, you'll never know it's in comb mode. I've done this on three systems, two VHF and one 220, and they all act about the same. Tune the TX for max output, and you'll end up on or very near comb mode. Really? Guess I'm spoiled with the Midland 13-509 G.E. radios: both are fairly difficult to make spurious even if you try. A long time ago I spent some time working with an old Standard VHF repeater that was given to me. It seemed to behave as you described your systems: spurious unless tuned just right with a spectrum analyzer. I wrote it off as defective returned it. Bob NO6B Yup-that's the difference between good design and what we call P-squared-D... -- Jim Barbour WD8CHL Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] M-Pro
To All: Wanted, High split, low band, Mastr-Professional, Rx strip and 100 Watt Tx strip. If any one has these in their scrap heap and will sell cheep, contact me @ seamansfh @ sbcglobal . net. Thanks Fred Seamans W5VAY YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
RE: [Repeater-Builder] M-Pro
Hi, I should have some of that / those in my garage. It's just I need to think about what complete radio model number I am looking for when I get out there in a few minutes. Neil Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] M-Pro Date: Tue, 11 Apr 2006 10:27:21 -0500 To All: Wanted, High split, low band, Mastr-Professional, Rx strip and 100 Watt Tx strip. If any one has these in their scrap heap and will sell cheep, contact me @ seamansfh @ sbcglobal . net. Thanks Fred Seamans W5VAY Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] INTERFACE FOR CAT CONTROLLER
DOES ANYONE KNOW HOW TO WIRE UP A CAT CONTROLLER TO A QUANTAR REAPEATER, AS I WISH TO USE A CAT CONTROLLER INSTEAD OF A QUANTAR CONTROLLER. ANY INFORMATION WOULD BE GREATLY APPRECIATED? W4NCR ANTHONY PURSLEY YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Repeater-Builder] Re: INTERFACE FOR CAT CONTROLLER
DOES ANYONE KNOW HOW TO WIRE UP A CAT CONTROLLER TO A QUANTAR REAPEATER, Kind of like putting a 4 cylinder engine in a Ferrari... s. ps: just kidding... (or am I?) Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] M-Pro
Neil: MT74---33- for a mobile. Fred - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, April 11, 2006 12:17 PM Subject: RE: [Repeater-Builder] M-Pro Hi, I should have some of that / those in my garage. It's just I need to think about what complete radio model number I am looking for when I get out there in a few minutes. Neil Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] M-Pro Date: Tue, 11 Apr 2006 10:27:21 -0500 To All: Wanted, High split, low band, Mastr-Professional, Rx strip and 100 Watt Tx strip. If any one has these in their scrap heap and will sell cheep, contact me @ seamansfh @ sbcglobal . net. Thanks Fred Seamans W5VAY Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] M-Pro
Thanks Fred, Neil Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] M-Pro Date: Tue, 11 Apr 2006 13:13:03 -0500 Neil: MT74---33- for a mobile. Fred - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, April 11, 2006 12:17 PM Subject: RE: [Repeater-Builder] M-Pro Hi, I should have some of that / those in my garage. It's just I need to think about what complete radio model number I am looking for when I get out there in a few minutes. Neil Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] M-Pro Date: Tue, 11 Apr 2006 10:27:21 -0500 To All: Wanted, High split, low band, Mastr-Professional, Rx strip and 100 Watt Tx strip. If any one has these in their scrap heap and will sell cheep, contact me @ seamansfh @ sbcglobal . net. Thanks Fred Seamans W5VAY Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: INTERFACE FOR CAT CONTROLLER
--- In Repeater-Builder@yahoogroups.com, ANTHONY [EMAIL PROTECTED] wrote: DOES ANYONE KNOW HOW TO WIRE UP A CAT CONTROLLER TO A QUANTAR REAPEATER... _ You cannot replace the Quantar's internal controller which is necessary for the station to operate, however, you can interface the Quantar to external devices such as a CAT controller. That way you can get features that the Quantar does not have such as voice ID's, courtesy tones, announcements and so on. There is a tab in the Quantar service manual called System Applications that shows how to make the connections for PTT, COR, Rx and Tx audio. To do this, the Quantar must have a wireline interface board installed. This also presumes that you are talking about analog only operation. If you want to do P25 digital or mixed-mode operation, you will require a DIU3000 to host the interface to an axternal controller. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: INTERFACE FOR CAT CONTROLLER
--- In Repeater-Builder@yahoogroups.com, skipp025 [EMAIL PROTECTED] wrote: DOES ANYONE KNOW HOW TO WIRE UP A CAT CONTROLLER TO A QUANTAR REAPEATER, Kind of like putting a 4 cylinder engine in a Ferrari... s. ps: just kidding... (or am I?) lol be hard work to setup ! Thanks AP. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Looking for N connector jam nuts
I'm trying to find about 40 hex jam nuts for bulkhead N connectors. The thread on N connectors is 5/8-24, and most of the jam nuts are 3/4 hex, roughly 1/8 thick. I'm trying to find stainless steel. I've tried a number of places on line, including McMaster-Carr and others, but came up empty at all but one place, and they quoted me $10.50 EACH!???!? Anyone have a favorite vendor that they could recommend? --- Jeff Jeff DePolo WN3A - [EMAIL PROTECTED] Broadcast and Communications Consultant Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Looking for N connector jam nuts
Jeff, Try Mendelson's in Dayton or Skycraft Surplus in Winter park Florida. John VE3AMZ - Original Message - From: Jeff DePolo WN3A [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, April 11, 2006 3:53 PM Subject: [Repeater-Builder] Looking for N connector jam nuts I'm trying to find about 40 hex jam nuts for bulkhead N connectors. The thread on N connectors is 5/8-24, and most of the jam nuts are 3/4 hex, roughly 1/8 thick. I'm trying to find stainless steel. I've tried a number of places on line, including McMaster-Carr and others, but came up empty at all but one place, and they quoted me $10.50 EACH!???!? Anyone have a favorite vendor that they could recommend? --- Jeff Jeff DePolo WN3A - [EMAIL PROTECTED] Broadcast and Communications Consultant Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Anyone got
Hi Guys Iam looking for a Motorola P200 on 50Mhz, why ?, well Iam in the UK and run an amateur 6mtr rptr and would like a P200 to use with the rptr. I have a good collection of Moto,s MT1000,s HT800, HT600E and P210 which I have put on amateur freqs. I have a Palstar KH-6 handie works OK but would love a P200. so if anyone has one or similar for sale and can send to the UK,pls mail me direct. Payment 100% via NoCheck or Paypal. As for my repeater, don't laugh, it is 2 Ge rangrs ex NYPD and an HNRC-4 controller soon to be upgraded to a 3+. I run a grand total of 12w ERP into a colinear at 32mtrs ASL. Iam however finding it impossible to get a Heliax duplexer made, or even get some scap 1 5/8 cable. thanks Steve YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Re: INTERFACE FOR CAT CONTROLLER
That's not a very nice thing to say about a Quantar! :-) Mike skipp025 wrote: DOES ANYONE KNOW HOW TO WIRE UP A CAT CONTROLLER TO A QUANTAR REAPEATER, Kind of like putting a 4 cylinder engine in a Ferrari... s. ps: just kidding... (or am I?) Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] M-Pro
I looked - thought I had one but don't ... all are sufffux 66, 77 88 Neil - WA6KLA Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] M-Pro Date: Tue, 11 Apr 2006 10:27:21 -0500 To All: Wanted, High split, low band, Mastr-Professional, Rx strip and 100 Watt Tx strip. If any one has these in their scrap heap and will sell cheep, contact me @ seamansfh @ sbcglobal . net. Thanks Fred Seamans W5VAY Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] M-Pro
Thank You for checking. 73's Fred - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, April 11, 2006 3:49 PM Subject: RE: [Repeater-Builder] M-Pro I looked - thought I had one but don't ... all are sufffux 66, 77 88 Neil - WA6KLA Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] M-Pro Date: Tue, 11 Apr 2006 10:27:21 -0500 To All: Wanted, High split, low band, Mastr-Professional, Rx strip and 100 Watt Tx strip. If any one has these in their scrap heap and will sell cheep, contact me @ seamansfh @ sbcglobal . net. Thanks Fred Seamans W5VAY Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Looking for N connector jam nuts
Hang on Jeff...I might have just what you need. Let me check at home tonight. At 01:53 PM 4/11/2006, you wrote: I'm trying to find about 40 hex jam nuts for bulkhead N connectors. The thread on N connectors is 5/8-24, and most of the jam nuts are 3/4 hex, roughly 1/8 thick. I'm trying to find stainless steel. I've tried a number of places on line, including McMaster-Carr and others, but came up empty at all but one place, and they quoted me $10.50 EACH!???!? Anyone have a favorite vendor that they could recommend? --- Jeff Jeff DePolo WN3A - [EMAIL PROTECTED] Broadcast and Communications Consultant Yahoo! Groups Links Thanks, Robin Midgett K4IDC 615-322-5836 office - rolls to pager 615-835-7699 pager 615-301-1642 home [EMAIL PROTECTED] http://www.people.vanderbilt.edu/~robin.midgett/index.htm Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: INTERFACE FOR CAT CONTROLLER
You can also use the MRTI connector and program the Quantar to give MRTI priority and be a base not a repeater. All signals are present on the DB25 on the rear of the chassis. The other way is by using the 50 pin telco connector on the rear and having the Wildcard option installed which is on or part of the Wireline Interfaceboard Also as NJ902 says, if your are wanting to pass or do P25 you use the DIU3000 between the Quantar and the external controller... Hope this helps... Bryon K0BSJ At 02:08 PM 4/11/2006, you wrote: --- In Repeater-Builder@yahoogroups.com, ANTHONY [EMAIL PROTECTED] wrote: DOES ANYONE KNOW HOW TO WIRE UP A CAT CONTROLLER TO A QUANTAR REAPEATER... _ You cannot replace the Quantar's internal controller which is necessary for the station to operate, however, you can interface the Quantar to external devices such as a CAT controller. That way you can get features that the Quantar does not have such as voice ID's, courtesy tones, announcements and so on. There is a tab in the Quantar service manual called System Applications that shows how to make the connections for PTT, COR, Rx and Tx audio. To do this, the Quantar must have a wireline interface board installed. This also presumes that you are talking about analog only operation. If you want to do P25 digital or mixed-mode operation, you will require a DIU3000 to host the interface to an axternal controller. Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Trade a Bird 43 (with slugs) for a telewave meter?
Trade a Bird 43 (with slugs) for a Telewave 44A Meter? Anyone interested in a meter trade? A Working Bird 43 meter (with some slugs) for a Telewave 44A Watt Meter. The deal can be sweeter than it looks at first glance. I have some nice extras for the meter deal depending on the condition of your working Telewave 44A Meter. Email me direct if you're seriously interested in working out a trade. thank you skipp skipp025 at yahoo.com Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Trade a Bird 43 (with slugs) for a telewave meter?
I'd take a Bird anyday over a Telewave. On 4/11/06, skipp025 [EMAIL PROTECTED] wrote: Trade a Bird 43 (with slugs) for a Telewave 44A Meter? Anyone interested in a meter trade? A Working Bird 43 meter (with some slugs) for a Telewave 44A Watt Meter. The deal can be sweeter than it looks at first glance. I have some nice extras for the meter deal depending on the condition of your working Telewave 44A Meter. Email me direct if you're seriously interested in working out a trade. thank you skipp skipp025 at yahoo.com Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [SPAM] [Repeater-Builder] Trade a Bird 43 (with slugs) for a telewave meter?
What slugs?? I might buy it outright.. but don't have a telwave to trade.. 73 Mike K5JMP www.k5jmp.us -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of skipp025 Sent: Tuesday, April 11, 2006 6:55 PM To: Repeater-Builder@yahoogroups.com Subject: [SPAM] [Repeater-Builder] Trade a Bird 43 (with slugs) for a telewave meter? Trade a Bird 43 (with slugs) for a Telewave 44A Meter? Anyone interested in a meter trade? A Working Bird 43 meter (with some slugs) for a Telewave 44A Watt Meter. The deal can be sweeter than it looks at first glance. I have some nice extras for the meter deal depending on the condition of your working Telewave 44A Meter. Email me direct if you're seriously interested in working out a trade. thank you skipp skipp025 at yahoo.com Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] M-Pro
You are welcome, Neil Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] M-Pro Date: Tue, 11 Apr 2006 16:04:23 -0500 Thank You for checking. 73's Fred - Original Message - From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, April 11, 2006 3:49 PM Subject: RE: [Repeater-Builder] M-Pro I looked - thought I had one but don't ... all are sufffux 66, 77 88 Neil - WA6KLA Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] M-Pro Date: Tue, 11 Apr 2006 10:27:21 -0500 To All: Wanted, High split, low band, Mastr-Professional, Rx strip and 100 Watt Tx strip. If any one has these in their scrap heap and will sell cheep, contact me @ seamansfh @ sbcglobal . net. Thanks Fred Seamans W5VAY Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Trade a Bird 43 (with slugs) for a telewave meter?
Me too ... I started using a Bird 43 long before I ever heard of Telewave - about 42-43 years ago. Neil - WA6KLA Original Message From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Trade a Bird 43 (with slugs) for a telewave meter? Date: Tue, 11 Apr 2006 16:07:37 -0700 I'd take a Bird anyday over a Telewave. On 4/11/06, skipp025 [EMAIL PROTECTED] wrote: Trade a Bird 43 (with slugs) for a Telewave 44A Meter? Anyone interested in a meter trade? A Working Bird 43 meter (with some slugs) for a Telewave 44A Watt Meter. The deal can be sweeter than it looks at first glance. I have some nice extras for the meter deal depending on the condition of your working Telewave 44A Meter. Email me direct if you're seriously interested in working out a trade. thank you skipp skipp025 at yahoo.com Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: Weird Kerchuking Problem
Well, I thought I would bring this saga to a close...it is a paging TX falsing the 141.3 CTCSS tone just enough to kerchuck the repeater. Try any other tone and it is quiet as a mouse! Tried moving it across the room, still to no avail. FYI, the CAT is set up for COR Tone. Since this thing is being tested at a different tower than where it will be, I am going to opt to leave it off for now and when it gets in it's permanent home, hope the tone will work right there. All our other machines, including the privately owned ones, have the same 141.3 tone. It's permanent home is about 15 miles away, and there are no paging TX's there... Thanks for all the suggestions! I sure hate I got into working on repeaters because of the death of one of our club members, but I am enjoying it! (Got 4 of these puppies to keep up, plus 2 APRS digis!) Scott NA4IT --- In Repeater-Builder@yahoogroups.com, Jim B. [EMAIL PROTECTED] wrote: Jay Urish wrote: Change your PL for a few days.. See what happens. Scott wrote: Here's the problem... Every so often (several times in 10 minutes) we are getting a key up of our repeater. Here is what we know... There is no signal coming in on the input frequency. No even a small spike. It is almost like something in the set up is timing and keying, but it is not an exact interval. Doesn't matter is RX tone is enabled in the CAT or not. Here is the setup... Motorola Mitrek trunk mount on 443.275, CAT 250 controller, Com-Spec TS64DS tone board. It has a good 300W 3 can duplexer that is tuned correctly and working well. 75Amp power supply. The cabinet also has an APRS rig in it, as well as a remote receiver for another repeater, and a link radio, but NONE of that is even turned on (and doesn't make a difference when it is). Suggestions as to what to look for...? Make sure you are using COS *AND* PL. The decoder may be falsing on random noise. -- Jim Barbour WD8CHL Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Trade a Bird 43 (with slugs) for a telewave meter?
Well I like My Bird Too, but as I got older and older I now like the Big Display on My Coaxial Dynamics 83000-A, which uses my Bird Slugs. http://www.coaxial.com/home_frames.htm Happy Repeater Building Don KA9QJG Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/