Re: [Repeater-Builder] MSF 5000 Repeater for sale
Where are you located? From: The Rices sri...@cfl.rr.com To: Repeater-Builder@yahoogroups.com Sent: Sun, January 17, 2010 7:15:24 PM Subject: Re: [Repeater-Builder] MSF 5000 Repeater for sale Please note: Those individuals that are asking me if I will ship need to understand that the only way I know of shipping this is by freight and I have no experience in mounting on a pallet or boxing for shipping. If you want it to be shipped you will have to arrange shipping and pickup (I can have some people on hand to load it on a truck). You will have to find a company responsible enough to palletize it and move it out. Thanks Steve Rice N4YZA 772-664-7238
Re: [Repeater-Builder] MSF 5000 Repeater for sale
I am 18 miles south of Melbourne Florida in a place called Barefoot Bay, Florida. 32976
[Repeater-Builder] Icom FR3000 Sensitivity Problem
I have an Icom FR3000-2 VHF repeater that was shipped to me some time ago. It was working fine before it was shipped. When I hooked it up, the display was not working. I opened the case and found that two of the flex cables between the logic board and the front display had come loose. There is a ferrite oval on the two and it appears that it had enough weight to cause the cables to come loose when jarred in shipping. After re-inserting the two flex cables, all functions of the repeater work perfectly. In doing a quick performance check, I found the receiver sensitivity is around 1uV. I checked the patch cable from the rear panel to the receiver board- it looks fine and DC resistance checks were good. Not having another cable with the same little connector as on the receiver board, I can't substitute it. I did try a patch cable with a bare end that I could insert into the receiver; the results were a touch worse than the factory cable (as I expected), so I think the cable is fine. I tried doing the alignment procedure in the service manual, but the sensitivity didn't improve. (I did check the service monitor with a known good receiver and its output was correct.) Before I remove the receiver board to try resoldering it, does anyone have any other ideas? Thanks, Doug K4AC
[Repeater-Builder] Re: Caution to Group Members Trojan from Yahoo Banner Advertisments
--- In Repeater-Builder@yahoogroups.com, wd8chl wd8...@... wrote: skipp025 wrote: Re: Caution to Group Members Trojan from Yahoo Banner Advertisements I actually believe I received the trojan from a banner ad while setting up new book-marks for one of the radio/repeater Groups I frequent. Banner ads? I don't see no stinkin' banner ads ;c} Gotta love Adblock! I have to agree with skipp025!! I use FireFox with AdBlock and don't see any ads!!!
Re: [Repeater-Builder] Re: Caution to Group Members Trojan from Yahoo Banner Advertisments
On 1/18/2010 3:39 PM, wd8chl wrote: skipp025 wrote: Re: Caution to Group Members Trojan from Yahoo Banner Advertisements I actually believe I received the trojan from a banner ad while setting up new book-marks for one of the radio/repeater Groups I frequent. Banner ads? I don't see no stinkin' banner ads ;c} Gotta love Adblock! And a real e-mail client... To protect your privacy, Thunderbird has blocked remote content in this message. :-) Nate WY0X
[Repeater-Builder] Re: my previous Caution post
Hello again to the Group, Let's all please drop the follow up posts in regards to my initial caution post. I placed the caution post on/at a number of Groups (of which I am a member) and I've been told it was totally uncalled for/wrong. Regardless of right or wrong, I've been given he11 from one group moderator for making the post(s). So please... all I want to do is advise you to make sure your Anti Virus software is active and up to date. People have been Emailing direct and I'm happy to answer questions if you want more information. thank you skipp
Re: [Repeater-Builder] Re: my previous Caution post
Skipp, In my estimation the moderator who yelled at you was totally wrong for doing that. You were trying to help fellow members on the list, which I think was great. Just my $0.01 and 3/4 cents. Don, KD9PT - Original Message - From: skipp025 To: Repeater-Builder@yahoogroups.com Sent: Tuesday, January 19, 2010 1:54 PM Subject: [Repeater-Builder] Re: my previous Caution post Hello again to the Group, Let's all please drop the follow up posts in regards to my initial caution post. I placed the caution post on/at a number of Groups (of which I am a member) and I've been told it was totally uncalled for/wrong. Regardless of right or wrong, I've been given he11 from one group moderator for making the post(s). So please... all I want to do is advise you to make sure your Anti Virus software is active and up to date. People have been Emailing direct and I'm happy to answer questions if you want more information. thank you skipp
Re: [Repeater-Builder] Re: my previous Caution post
You won't hear anything from me ! Skipp, please consider this an invitation to continue to post your warnings. Mike WA6ILQ moderator of repeater-builder At 11:54 AM 01/19/10, you wrote: Hello again to the Group, Let's all please drop the follow up posts in regards to my initial caution post. I placed the caution post on/at a number of Groups (of which I am a member) and I've been told it was totally uncalled for/wrong. Regardless of right or wrong, I've been given he11 from one group moderator for making the post(s). So please... all I want to do is advise you to make sure your Anti Virus software is active and up to date. People have been Emailing direct and I'm happy to answer questions if you want more information. thank you skipp Yahoo! Groups Links
[Repeater-Builder] HP E8285A test set/monitor
Some time back we had a thread (can not find) on the E8285A cell site test unit being used as VHF/UHf service monitor. Someone questioned if the signal gen was accurate as far as the level is concerned. I just checked mine at 146.00 Mhz and it was dead on freq and level. Just for info and follow up. WA4VBC
[Repeater-Builder] WILTRON SWR Bridge
I am Looking for another Wiltron SWR Bridge Model 60NF50 with 46dB Option ? Anybody have one at a good price?
Re: [Repeater-Builder] Re: my previous Caution post
Obviously the moderator of what ever group gave you hell does not have the intelligence or common sense to be a moderator... Here's your sign kinda stuff!!
Re: [Repeater-Builder] FS- Motorola R100 UHF Repeaters
Whats involved in making these work on ham band? Dave On 1/16/2010 9:10 AM, tracomm wrote: *For sale--Motorola R-100 UHF Repeaters* *UHF, now on 461/466 MHz. * *110 vac or 12 vdc* *4 units- Complete, clean* *2 ea. Power out, working when removed* *1 ea. ½ watt output* *1 ea. Power up, no tx or rx no further checking* *Model H5016B (3) H5018 (1)* *1 ea ComSpecTP3200 Controller with cable to R-100 * *Make great link repeaters* * * *#1- H5016B 794FRW0114 **½ watt output * *#2- H5016B 794FSA0173 **28 watts output* *#3- H5018B 794FPS0081 **No tx/No rx * *#4- H5016B 376FPL0087 **24 watts output * * * *Sold as a package $500.00 plus UPS* *Shipping weight 2 boxes, 75 lbs ea.* *Shipped from 48088* * * *trac...@aol.com*
Re: [Repeater-Builder] Re: my previous Caution post
Tnx Skipp !! You've saved my bacon. I have since loaded Adblock Plus to Firefox and Thunderbird.. 73 VK4JKL
RE: [Repeater-Builder] FS- Motorola R100 UHF Repeaters
Dave, This is your best resource for information regarding your inquiry: http://www.repeater-builder.com/motorola/r100/r100-index.html Mark N9WYS From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Dave Hubbell Whats involved in making these work on ham band? Dave On 1/16/2010 9:10 AM, tracomm wrote: For sale--Motorola R-100 UHF Repeaters UHF, now on 461/466 MHz. 110 vac or 12 vdc 4 units- Complete, clean 2 ea. Power out, working when removed 1 ea. ½ watt output 1 ea. Power up, no tx or rx no further checking Model H5016B (3) H5018 (1) 1 ea ComSpecTP3200 Controller with cable to R-100 Make great link repeaters #1- H5016B794FRW0114 ½ watt output #2- H5016B794FSA0173 28 watts output #3- H5018B794FPS0081 No tx/No rx #4- H5016B376FPL0087 24 watts output Sold as a package $500.00 plus UPS Shipping weight 2 boxes, 75 lbs ea. Shipped from 48088 trac...@aol.com No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.432 / Virus Database: 270.14.150/2632 - Release Date: 01/19/10 07:34:00
RE: [Repeater-Builder] Re: my previous Caution post
For those wanting to be extra careful while continuing to use Internet Explorer, I think you can prevent this as well... In my instance, I have the following configuration in IE: Within Internet Explorer, select Internet Options, then select the Privacy tab. First, check the box Turn on pop-up blocker Next, click the Advanced button. CHECK the box reading: Override automatic cookie handling Below that check: ACCEPT First-Party cookies and PROMPT Third-Party Cookies I also have checked: Always allow session cookies These settings block a LOT of the banner pop-ups normally associated with various websites. I haven't been bitten by a bug in quite a while (pounding - not knocking - on wood!) while using these settings. This includes the dreaded Antivirus 2009 that is becoming more prevalent lately. Of course, Malwarebytes Antimalware wil remove that one, but I've been able to avoid it altogether so far this way... YMMV. Good luck, all - and happy surfing. 73 de Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of JG Tnx Skipp !! You've saved my bacon. I have since loaded Adblock Plus to Firefox and Thunderbird.. 73 VK4JKL
