[Repeater-Builder] Re: Controller suggestions, TKR-820
The CAT-400 is probably the answer you're looking for!!! Brian nb9e
[Repeater-Builder] VXR-5000 Spur
I recently acquired a VXR-5000 UHF repeater on 442.650 PL 100.0, it seems to be generating an on freq carrier even when not keyed!!! Almost like the exciter is staying on although the service monitor shows no power being transmitted Anybody else ever have this problem and what is the fix? Brian nb9e
[Repeater-Builder] Re: 900mhz , DTR, 906 to 923.75 MHz FHSS
It semms to me I remember reading a thread concerning automatic power control for FHSS. Apparently someone contacted the FCC and was told while they weren't going to modify the part 97 rules concerning apc they weren't concerned with amateurs using modified part 15 equipment!!! Anybody else rember where this thread was posted? AR902 or somewhere? Brian nb9e
[Repeater-Builder] Re: 900mhz , DTR, 906 to 923.75 MHz FHSS
What if any precludes the use by licensed amateurs of this setuo (excluding the amplifier the other guy mentioned)? It seems under Part 97 rules we could do this!!!Brian nb9e
[Repeater-Builder] Re: 900mhz , DTR, 906 to 923.75 MHz FHSS
Just for the heck of it I plugged one of my Radio Shack simplex repeater controllers into the DTR-650. The plug is not quite correct(I'll be checking the print) but this will work. I have a set of the DTR-650's on loan testing their functionality. The pair I have has the integral antenna. Can someone tell me what type of antenna connectors the ones with removeable antennas have? Are they SMA like most other Moto's? I imagine with a small PS and a battery eliminator(lighter cord false battery) connected to a kp-20 on a mountain top out here in NV this scheme might work pretty well!!! Just set the units up for group call. "73" Brian nb9e
[Repeater-Builder] Micor repeater
Does anyone have a jpeg of where to add/delete a jumper to enable PL decode on a micor repeater? The PL card is already installed!!! Thanks, Brian nb9e
[Repeater-Builder] ifr-1600 users manual?
Does anyone have access to, or willing to part with a users manual for an IFR-1600? Thanks in advance!!! Brian nb9e
[Repeater-Builder] Fwd: Crossband Repeater
--- In [EMAIL PROTECTED], "Brian R. Chapman" <[EMAIL PROTECTED]> wrote: I am trying to make a cable for emergencies etc. between my TK- 780H and 880H. What is the proper audio padding from discriminator audio out-to mic audio in on the kct-19? Note: Kenwood kct-19 does not provide filtered muted audio !!! Thanks, Brian --- End forwarded message --- Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/