Re: [Repeater-Builder] DB 224E Harness wanted
I can help you..email me off line --- On Wed, 5/12/10, steve w4...@localnet.com wrote: From: steve w4...@localnet.com Subject: [Repeater-Builder] DB 224E Harness wanted To: Repeater-Builder@yahoogroups.com Date: Wednesday, May 12, 2010, 1:20 AM Hi all, I have a DB 224E antenna that apparently has the wrong harness. When I reset the dipole spacing for the antenna, the harness was not long enough to reach the dipoles. Also, the resonant freq seems to be in the low 150 mhz range. SWR readings are very high in the 145 mhz range. Does anyone have a 138-150 range harness they want to sell? Thank you, Steve W4SEF
Re: [Repeater-Builder] Re: MSF5000 Power Supply Capacitors
contact me off line Dan --- On Wed, 7/15/09, nj902 wb0...@arrl.net wrote: From: nj902 wb0...@arrl.net Subject: [Repeater-Builder] Re: MSF5000 Power Supply Capacitors To: Repeater-Builder@yahoogroups.com Received: Wednesday, July 15, 2009, 9:12 PM --- In Repeater-Builder@ yahoogroups. com, Jared ke4...@... wrote: Anybody got a source for the large capacitors (65000 and 12 uf) in MSF station power supplies? - - - - - For comparison, the Motorola parts are: 2382681N01, 64000uf, $42.84 2382681N02, 12uf, $75.86
[Repeater-Builder] IFR 7550 Schematic Required
I am in need of a schematic for the Processor PC Board Assy of a IFR 7550. It is labeled as figure 5-16 Sheet 2 of 2. The diagram I have is too small and impossible to read the pin #s or any of the text. If I could obtain an exploded view of this schematic it would be greatly appreciated, Dan
Re: [Repeater-Builder] cable tv hardline loss question
is it P1 or P3 cabletony dinkel [EMAIL PROTECTED] wrote: Can someone estimate for me, the approximate loss of typical half inch cable TV hard line at 450 mHz?tnxtdwb6mieYahoo! Groups Links* To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/* To unsubscribe from this group, send an email to:[EMAIL PROTECTED]* Your use of Yahoo! Groups is subject to:http://docs.yahoo.com/info/terms/ YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
RE: [Repeater-Builder] Looking for a mobile duplexer
Ted.. I think I sent this to you by mistake Dan -Original Message- From: Tedd Doda [mailto:[EMAIL PROTECTED] Sent: Sunday, April 11, 2004 10:05 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Looking for a mobile duplexer On Sun, 11 Apr 2004 19:51:14 -0500, Mike wrote: Also, cheap as possible for 50-75 watts rating. VHF, UHF, 6 Meters(!) ??? Tedd Doda, VE3TJD Lazer Audio and Electronics Baden, Ontario, Canada Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/