[Repeater-Builder] WTD: TS32 Mastr II Boad or TS-64 Mastr II Board
Hi All, Im looking for a TS-32 Mastr II Board or TS-64 Mastr II Board or lastly a TS-32 or TS-64 module with leads. Email me off list at [EMAIL PROTECTED] (remove _'s) if you have one floating around Thanks for the space --Don Wisdom KD7WKF
[Repeater-Builder] WTD: 19D432500G1 Channel guard board for mastr II
Hi All, The subject line says it all. Im looking for a 19D432500G1 channel guard board for a Mastr II. This is the dip switch encode / decode board. My old versatone one died:/ I would also take a 19D432500G3 board which is decode only (but still dip switch programmable!) Please contact me off list @ [EMAIL PROTECTED] (remove underscores) Thanks --Don Wisdom KD7WKF
Re: [Repeater-Builder] Micor crystals
Robert, Call their 800# and you'll get one of the nice crystal ladies and you can tell her what you need and shell setup the order in their computer system and get the xtals growing and then you ship them your elements whenever and they install / compensate when they get them --Don On 9/11/07 20:56, n9wys [EMAIL PROTECTED] wrote: Robert, What I have done in the past is send in my old elements with a letter detailing what it was I needed to have done. (i.e. re-crystal and fully compensate) When they came back they were exactly what I needed... If I remember correctly, cost was about $55 for each element. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of georgiaskywarn Hi Folks, Wanting to order crystals for my Micor repeater from ICM, but unfortunately my work schedule and their operating hours is not jiving. I see they have some online stuff, but just not sure what I need to fill out. I found this page, http://icmfg.com/order_tcxos.html but not sure if that is what I need nor what to fill out here. The freq. on the repeater is 444.600 TX and 449.600 RX. Any help would be appreciated. Thanks, Robert Yahoo! Groups Links !SIG:46e75572196701487063319!
[Repeater-Builder] Mastr II 100w (station) 403-430 for sale or trade (w/ GETC shelf)
Hi All, I have a Mastr II 403-430 mhz 100w continuous duty station up for grabs. It has a GETC shelf attached to it but that can be removed to reduce shipping weight (I have a email from the M/A Com TAC detailing the removal of the shelf that will be included to the buyer / trader) Station was removed in working condition from a large government site in eastern Idaho. FedEx can ship these stations to the bay area for $20 (minus boxing) I have no idea what the shipping would be to the east coast if you are interested email me with your zip code. I would like to get $250 for the station or I am open to trades of GE / MA Comm / Ericsson Orion equipment I also would be interested in a ARCOM RC-210 as a trade. Please email me off list if interested. My email address is donw_(at)_engineeringinc_(dot)_com Thanks for the space everyone --Don Wisdom KD7WKF
Re: [Repeater-Builder] Re: Super Sataionmaster Disassembly
Me too as well :P donw at engineeringinc dot com On 1/13/07 11:01, Kevin Custer [EMAIL PROTECTED] wrote: George Sintchak wrote: Steve, I will send you an email with description pictures of PD220 antenna dissassenbly I did about a year ago. I want to contribute this as an article for the group, but didn't have the time to finish it up yet, but all the info you need is included. Need ur email address. George / WA2VNV Me too please, and it'll become an article in time. kuggie at kuggie dot com Kevin Custer RB Owner Yahoo! Groups Links !SIG:45a91e83109053936515356!
[Repeater-Builder] Mastr II 6' Metering panel wanted
Hi All, Im looking to purchase 1 or 2 6' GE cabinet metering panels my timeframe to purchase is at the end of the month. Please advise if you have any thing available Thanks --Don KD7WKF
[Repeater-Builder] Mastr II Stuff for sale / Wanted to Trade
Hi All, This is the last time ill post this before they goto fleabay. I've had some contact with a few of you but no one has committed. I have the following: 1) 1 Mastr II Station 403-430mhz 100watt continuous duty PA with GETC shelf attached wired for a Mastr III Power supply. (the GETC shelf is easy to remove I have a email from the M/A Com TAC detailing how to remove it) 2) 2 Mastr II Stations 403-430mhz 100watt continuous duty PA with stock cards. 3) 1 Mastr III Power supply would prefer to sell with item #1 but if purchaser if item #1 does not want it I will sell it to anyone who wants it. I would like to get $250 / station and $100 for the supply. I am open to reasonable offers on any of the above items. However I am looking for the following items: 1) 1 Mastr II VHF Continuous duty 110 watt station (repeater) 2) 1 or 2 Mastr II UHF Continuous duty 100 watt UHF 450-470 stations. If your interested in a trade email me off list at donw(at)engineeringinc.com Thanks --Don Wisdom KD7WKF
[Repeater-Builder] Mastr II Stuff for sale
Hi All, I have 3 Mastr II 403-430mhz stations with 110 watt continious duty PAs for sale (all are repeaters) . Power supplies are not included in this deal. I would like to get $250 / station but I am open to offers trades etc of orions and such. Please email me off list @ [EMAIL PROTECTED] Thanks --Don Wisdom KD7WKF
[Repeater-Builder] Micor PA's for sale
Hi All, I have 2 micor PA's for sale (out of stations) one UHF TLE1711A http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=7616209023 one UHF TLE1713A http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=7616208703 The TLE1711A is of a unknown bandsplit The TLE1713A is a 75 watt UHF 450-470 PA. Items look to be in good condition but as i play with GE stuff i dont have a way to test them. Thanks --Don Wisdom Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Micor PA's for sale
And Lastly Thank you Kevin for allowing me to post this --Don Wisdom KD7WKF Don Wisdom wrote: Hi All, I have 2 micor PA's for sale (out of stations) one UHF TLE1711A http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=7616209023 one UHF TLE1713A http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=7616208703 The TLE1711A is of a unknown bandsplit The TLE1713A is a 75 watt UHF 450-470 PA. Items look to be in good condition but as i play with GE stuff i dont have a way to test them. Thanks --Don Wisdom Yahoo! Groups Links !SIG:44595f9637481461260369! Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] MSF-5000 Manuals
Hi, Im looking for a set of MSF-5000 manuals for UHF MSF-5000 low govt split. Please advise on cost and availability. Thanks --Don Wisdom Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Mastr II Cabinet Stuff wanted
Hi, I have a 6 foot GE cabinet and im looking for a panel for the top of it with metering on it. Anyone have one laying around theyd part with ? Thanks --Don Wisdom KD7WKF Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Mastr II Cabinet
Hi All, I picked up a Mastr II Cabinet today (6 foot) it has what looks like a vending machine lock on the front and what looks like a bf10 lock but the bf10 key doesnt fit in. Anyone have any ideas what these might be ? High Security locks ?? Im going to drop them off at the locksmith's tommorrow and see if they can figure out the keys Any help is appreciated Thanks --Don Wisdom KD7WKF Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Mastr II Cabinet
Do you guys have the same type of lock i was describing ? --Don On 2/22/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Likewise, for my 100W and 200W GE MASTR II cabinets - a GE1000 key. The BF10A worked in the mobiles and small GE cabinets. LJ -Original Message- From: N9WYS [EMAIL PROTECTED] Sent: Feb 22, 2006 9:06 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Mastr II Cabinet Might be a GE1000 key... That's what mine needed anyway. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Don Wisdom Sent: Wednesday, February 22, 2006 10:33 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Mastr II Cabinet Hi All, I picked up a Mastr II Cabinet today (6 foot) it has what looks like a vending machine lock on the front and what looks like a bf10 lock but the bf10 key doesnt fit in. Anyone have any ideas what these might be ? High Security locks ?? Im going to drop them off at the locksmith's tommorrow and see if they can figure out the keys Any help is appreciated Thanks --Don Wisdom KD7WKF Yahoo! Groups Links Yahoo! Groups Links !SIG:43fd491081046304319221! Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Mastr II Cabinet
Unfortunatly someone broke the rear lock to get in the cabinet. Im wondering if the locksmith can repin it. All they did was pull the pins out of the inside of the lock hopefully they can repin it. --Don On 2/22/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Yes, it was indeed something like a vending machine lock - I just had never thought of it as such, but htat's a good description. It kinda pops out when you unlock it, and you have to press it back in to lock it back up. Quite different than the small locks that require the BF10A key. LJ -Original Message- From: Don Wisdom [EMAIL PROTECTED] Sent: Feb 22, 2006 9:36 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Mastr II Cabinet Do you guys have the same type of lock i was describing ? --Don On 2/22/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Likewise, for my 100W and 200W GE MASTR II cabinets - a GE1000 key. The BF10A worked in the mobiles and small GE cabinets. LJ -Original Message- From: N9WYS [EMAIL PROTECTED] Sent: Feb 22, 2006 9:06 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Mastr II Cabinet Might be a GE1000 key... That's what mine needed anyway. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Don Wisdom Sent: Wednesday, February 22, 2006 10:33 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Mastr II Cabinet Hi All, I picked up a Mastr II Cabinet today (6 foot) it has what looks like a vending machine lock on the front and what looks like a bf10 lock but the bf10 key doesnt fit in. Anyone have any ideas what these might be ? High Security locks ?? Im going to drop them off at the locksmith's tommorrow and see if they can figure out the keys Any help is appreciated Thanks --Don Wisdom KD7WKF Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links !SIG:43fd4beb220591474556261! Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Stationmaster Brackets Refinishing
Hi, Im looking for brackets to mount a stationmastter on the side of a rohn tower. Im also looking for suggestions to refinish a stationmaster antenna. Ive tried the instructions ive seen on the internet but minimum orders of refinishing materials are 4 gallons. Anyone have any alternate suggestions ? Thanks --Don Wisdom KD7WKF Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Tuning Tool availability
Hi All, Im searching for a ST2507 tuning tool does anyone have one laying around they would part with ? Thanks --Don Wisdom KD7WKF Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Versatone wanted
Hi All, Im looking for a 100.0hz versatone. Please reply directly if you have one avaialble and as to what the cost will be Thanks --Don Wisdom KD7WKF Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] re: GE Voter
paul, are the voters UHF or VHF ? I may be intrested --Don [EMAIL PROTECTED] 12/19/2003 7:38:20 PM Hello, I have several GE voters here in my shop if anyone wants some. Paul WB5IDM -Original Message- From: skipp025 [mailto:[EMAIL PROTECTED] Sent: Friday, December 19, 2003 11:19 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] re: GE Voter Hi Dave, Some circuits are true preformers. The original GE voter is an excellent circuit and quite the preformer, comming from a guy with five shelves of Motorola Spectrac Tac Voters in the garage. I see the GE voters shelves offered up on Ebay every so often and wonder why more people don't fight over them. I guess most people don't know what they really are about. cheers skipp025 at yahoo.com David Malicki [EMAIL PROTECTED] wrote: I originally used a GE Voter, and personally, am considering going back to it. The GE voter appears to be more rock solid in terms of hysterisis , and less tempermental to temperature changes. Dave Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] re: GE Voter
oops that was supposed to goto paul not the list sorry :) --don [EMAIL PROTECTED] 12/19/2003 11:37:35 PM paul, are the voters UHF or VHF ? I may be intrested --Don [EMAIL PROTECTED] 12/19/2003 7:38:20 PM Hello, I have several GE voters here in my shop if anyone wants some. Paul WB5IDM -Original Message- From: skipp025 [mailto:[EMAIL PROTECTED] Sent: Friday, December 19, 2003 11:19 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] re: GE Voter Hi Dave, Some circuits are true preformers. The original GE voter is an excellent circuit and quite the preformer, comming from a guy with five shelves of Motorola Spectrac Tac Voters in the garage. I see the GE voters shelves offered up on Ebay every so often and wonder why more people don't fight over them. I guess most people don't know what they really are about. cheers skipp025 at yahoo.com David Malicki [EMAIL PROTECTED] wrote: I originally used a GE Voter, and personally, am considering going back to it. The GE voter appears to be more rock solid in terms of hysterisis , and less tempermental to temperature changes. Dave Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/