[Repeater-Builder] ic 221
greetings, I have a pair of 221s radio's. they were a repeater pair. the tx radio lost the power output so I have switched the roles of the radio's. I would wonder if anyone can help me with the programming of these radio's. I have the program and the box to connect to the radio. thanks, Loren.
[Repeater-Builder] ref battery question thanks
I want to give a very big Thank You to the following: Dave WB2FTX, Lee, Bob NO6B and Doug. You were nice enough to answer my query. After posting the goofy question I was in amazement as to the amount of information I did not know and the information available. I sit here Humbled and amazed. My MANY thanks guys, Loren Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] battery question
Got a small question, I have recently been given a pair of 12 v BAT_0103 batteries. These are sealed lead acid cell (UPS) and are 75 amp hr. I am currently using a pair of car batteries as battery back-up. Are the sealed ones better to use or does it make no difference. The GE power supply will charge them and switch to them during ac outage. Thanks Loren Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] base station power supply
I have a GE base station supply with battery back up option, Is there anyway to make the change-over from ac to battery faster? It seems to take about 30 minutes. seems way to long. Loren Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] GE Mastr II - what have I got?
you have a mobile unit,12volt,40 watt,30khz spacing,8 freq capable,1 tx and 1 rx in radio,standard options, 150.8 to 174 mhz range. hope that helps - Original Message - From: Don Pomplun [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, April 17, 2005 1:25 PM Subject: [Repeater-Builder] GE Mastr II - what have I got? Our local volunteer excursion railroad is growing to the point where simplex radio communications is not filling the need (adding another 3 miles of track, windy railroad, multiple trains). So going repeater is an option. I have seen articles ads about converting a GE Master Exec II series radio for repeater operation. Yesterday I was scrounging around our stash and found a single GE radio. Maybe you can tell me what I've got and its potential. Name plate data is: GE Mastr II comb MX56KAS66A ser 8493743SPL FCC TX Data KT-32-B FCC RX Data ER-64-A We also have a number of Motorola Micor series radios, and I'd welcome comments on their suitability vs the GE. TIA Don K2BIO Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] I am looking for
I am in need of the test cable for a 4ex3a11 for the mastr II, the red and black test cable with or without end. If you have an extra please let me know if you would part with it. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] mastrII help
Hi, have a UHF GE MastrII using as a repeater with a nhrc 2 controller and the control head/cable w/ mic hooked up for power.. The audio level (on the output) seems to be low. I have the pickup on pin 20 on J901 and using CAS(pin 9 on J904) for the controller. Or should I use the RUS pin on 904 board? The pots on the controller don't seem to have enough adjustment . Any help ALWAYS appreciated. N2LSJ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
[Repeater-Builder] manuals please help
I am looking for a couple of radio manuals. I need a GE MastrII UHF mobile(75 watt) manual and a Motorola Mitrek VHF Manual. In the process of putting a repeater together and need the manuals top help re-tune the radio's for proper operation. N2LSJ Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Manuals for RCA and other MFGs: was -- received a rca repeater
Hi Dave, looking for a GE mastr II uhf radio service manualalso a mitrek vhf manual. - Original Message - From: Dave Schmidt [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Friday, September 05, 2003 9:58 AM Subject: [Repeater-Builder] Manuals for RCA and other MFGs: was -- received a rca repeater I also has a TON of RCA manuals. Series 500, 700, 1000, ML1000 Veetac, Tactec, etc ... HTs, mobiles, base and repeaters. I've been trying to get this pile to leave... Along with the other file cabinets full of Uniden, Standard, Motorola, Johnson etc Manuals. So if you need a manual. Please let me know. Dave N9NLU FOR SALE STUFFS: http://www.kmcnet.net/kmc_Newsgroup_FS_List.htm Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/