Re: [Repeater-Builder] Re: Zetron model 48 controller
Thanks for the reply. This is just a plain Model Zetron 48 not an jR. Is there much difference between the plain &JR, also do you have the method to program the eproms? Wesley AB8KD
Re: [Repeater-Builder] Zetron model 48 controller
Hi Mike, You helped me out in the past on my Compa 6 meter station. Tks again. The Zetreon Model 48 is an plain Jane. Wesley AB8KD
Re: [Repeater-Builder] Re: Free to a good home (free except you pay shipping)
Great Mike. Will take that Mocom 70 Package . Sounds realy good. Let me know by e-mail ([EMAIL PROTECTED]) Money you need & list of other Motorola Equipment. Wes AB8KD
Re: [Repeater-Builder] Free to a good home (free except you pay shipping)
Hi Mike, Will take the Mocm 70 Control Head. Let me know what the Shipping charge is & will send you an Bank Casiers check. Wesley AB8KD
Re: [Repeater-Builder] Thanks, Alum Tape and Antenna...Tape part#?
Hi Jeff, If you can give me a part # on that Aluminum tape would appreciate it, as I have ab DB222 that needs it. Wesley AB8KD
[Repeater-Builder] Re: [Repeater] Re: Poor Mans Repeater Project anyone?
Hi Gary, Would enjoy having you along on my new adventure. On your deaf Rx audio, it seems there is an jumper that needs to be removed, Will check today, Wesley 73's
Re: [Repeater-Builder] E-prom Reader-Writer for Phoenix
Hi Jim, Would be interested in taking you up on that offer. have 2 GE Phoenix(16 Channel) one VHF, one UHF,which would like the Chips programmed. was looking for your e-mail address on ARRL website, where I could reply direct to you, instead of tying up the Repeater-Builder Website. My e-mail address is [EMAIL PROTECTED] Wesley AB8KD
Re: [Repeater-Builder] KC5EVE s GE Phoenix Programmer
Hi Paul Glad to know this, as I was planning to build this Circuit. Tks for Info Wesley AB8KD Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Favorite power swr bridge
What I meant to say Steve is,the 807 Tubes brings back some good memories as in 1957 I built mt first Cw Transmitter using these tubes Wesley AB8KD Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Building a Icom repeater HELP !!!!
Hi Matt I have the same Icoms that you Do. Bought them at Dayton Hamfest for $25 dollars a piece. Bought an Repeater interface ITS-10 from EPCOM,along with the Programming Cable & software for less than a $100 bill. it works great. Picked up a 4 can Motorola Cavity at Geotgetown,Oh Hamfest for $100. use (T1501Al) works great with the Hustler G6-440 Antenna.At 30 feet, my range is 16 Miles. I do use Andrew Hardline. The ICS-10 is a complete Repeater Interface that plugs into each Radio. Audio,Keying Cor, 3 second delay. Years ago when I didn,t shake so bad. Would have done it the Hard Way. Wesley AB8KD Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: EEproms Phoenix Radios
Thanks Coy. This looks like the Route that I wll probably Take. Did I happen to see you on Echolink yesterday?(Disney World) connected to me while I was talking to that Canadian Station? Wesley AB8KD Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] EEproms Phoenix Radios
Thanks Steve for your Offer.Was hop[ng to find a Way to do it myself. Wes AB8KD Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] WTS Sinclair Duplexer VHF
Hi Roger Am certainly Interested in that Sinclair Duplexer, if someone has not beaten me to it Wesley AB8KD Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/