[Repeater-Builder] Re: what pac-rt means

[Tony De Angelo]

PAC-RT =  Portable Area Communications - Repeater

http://www.repeater-builder.com/motorola/manuals/PAC-RT-H13TTY3110A_68P81010C06-B.pdf

Tony

[Repeater-Builder] RE: Johnson CR1010 receiver tuning issues

[Tony De Angelo]

James

I retuning 3 CR1010 a few months ago from 460.XXX to 444.XXX.  The slugs
only had a thread or two left in some cases.  They were very sharp and
required slow attention to detail.  No mods were necessary.

I'm still  looking for a wiring harness cable as one repeater only had the
modules.

Tony



 In a message dated 8/13/2009 11:55:26 P.M. Eastern Daylight Time,
Repeater-Builder@yahoogroups.com writes:

Johnson CR1010 receiver tuning issues
http://groups.yahoo.com/group/Repeater-Builder/message/93275;_ylc=X3oDMTJxNmw5cm4zBF9TAzk3MzU5NzE1BGdycElkAzEwNDE2OARncnBzcElkAzE3MDUwNjMxMDgEbXNnSWQDOTMyNzUEc2VjA2Rtc2cEc2xrA3Ztc2cEc3RpbWUDMTI1MDIyMjEwMw--
Posted
by: n0qzv_jhorn jah...@mahaska.org
jah...@mahaska.org?subject=%20re%3ajohnson%20cr1010%20receiver%20tuning%20issues
n0qzv_jhorn http://profiles.yahoo.com/n0qzv_jhorn Thu Aug 13, 2009 9:21 am
(PDT) I am having difficulty tuning a Johnson CR1010 receiver that I have
crystaled for 448.975. I was able to get it to tune to the original
frequency of 466.xxx without any problem. I was wondering if there is a mod
that needs to be done to get it down that low.

thank you

James N0QZV

[Repeater-Builder] Re: E.F. Johnson Repeaters

[Tony De Angelo]

James I'm not sure when you contacted ICM about re rocking your TCXO
but I had no problem with them in July 2008.  I sent them 2 TCXO's.
They were rocked and compensated and returned in less than 2 weeks.
These were for the CR1010.

Catalog # Description
41534 JOHNSON#521-3(518-2)TX(440-474)CR101
41533 JOHNSON#521-2(518-2)RX(440-474)CR101
37006 ICM TO INSTALL,TEMP/COMP  TEST

Maybe you should call ICM back.  They are still listed in the current catalog.

Tony

 2c. Re: E.F. Johnson Repeaters

 Posted by: n0qzv_jhorn jah...@mahaska.org   n0qzv_jhorn

 Sun Dec 14, 2008 8:07 pm (PST)

 I have a CR 1010 repeater that I have crystaled for the ham band. The
 first place I called was ICM and they did not want to work on the
 TCXOs at all.