At 08:27 PM 03/26/08, you wrote:
- I'm kinda new to this so here it goes -
I have a gm300(tx) linked to m120(rx) as a repeater using a i20r
controller. I would like to have audio from the internal speaker on
the rx side of the repeater.
heres what i have tried:
I have local sound(button beeps and power beep) on the tx side but no
sound on the rx side.
When I unplug the tx radio from the tx port on the i20r and switch it
to the rx port and take the rx radio and plug it into the tx port I
have local sound (button beeps and power beep) on the rx radio but not
rx audio.
so that leads me to believe the problem is with the pinout of the i20r.
When I look at the pinout settings for both rx and tx sides they are
the exact same and I still don't have rx audio or local sound on the rx
radio.
Hopefully some one can help me with this problem or at least point me in
the right direction
Thanks,
Tyler
Install the speaker enable jumper on the receiver.
Go to the web site associated with this yahoogroup mailing list at
www.repeater-builder.com, then click on Motorola then Maxtrac.
Scroll down to the photo of the red jumper on the back of the radio.
Since you have a plug in that socket, you will have to implement
that jumper with a different method, but adding that connection is
the idea.
Mike WA6ILQ
