Has anybody built their own battery powered power supply for the Micor Repeater? I am now at the stage I would like to remove the original Micor repeater power supply and build a new one that is a 12 Volt system. If anyone has built one with the 10 volt regulator etc can you contact me direct with problems and ideas. I am trying to decide if I should run the repeater constantly from batteries, like almost all Alarm systems do, or have it switch over. I did get the ICS controller installed in the cage on a spare card so that it hinges out if I need to get to the jumpers on the back side. It simply plugs in the old squelch card slot. This way to revert to standard repeater all that is required is to remove the card plug in the squelch card and line card and remove one jumper on the backplane(local audio)
Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/