[Repeater-Builder] Re: INTERFACE FOR CAT CONTROLLER
Thanks all for advice !! AP. --- In Repeater-Builder@yahoogroups.com, Bryon Jeffers K0BSJ [EMAIL PROTECTED] wrote: You can also use the MRTI connector and program the Quantar to give MRTI priority and be a base not a repeater. All signals are present on the DB25 on the rear of the chassis. The other way is by using the 50 pin telco connector on the rear and having the Wildcard option installed which is on or part of the Wireline Interfaceboard Also as NJ902 says, if your are wanting to pass or do P25 you use the DIU3000 between the Quantar and the external controller... Hope this helps... Bryon K0BSJ At 02:08 PM 4/11/2006, you wrote: --- In Repeater-Builder@yahoogroups.com, ANTHONY ATGP@ wrote: DOES ANYONE KNOW HOW TO WIRE UP A CAT CONTROLLER TO A QUANTAR REAPEATER... _ You cannot replace the Quantar's internal controller which is necessary for the station to operate, however, you can interface the Quantar to external devices such as a CAT controller. That way you can get features that the Quantar does not have such as voice ID's, courtesy tones, announcements and so on. There is a tab in the Quantar service manual called System Applications that shows how to make the connections for PTT, COR, Rx and Tx audio. To do this, the Quantar must have a wireline interface board installed. This also presumes that you are talking about analog only operation. If you want to do P25 digital or mixed-mode operation, you will require a DIU3000 to host the interface to an axternal controller. Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: INTERFACE FOR CAT CONTROLLER
DOES ANYONE KNOW HOW TO WIRE UP A CAT CONTROLLER TO A QUANTAR REAPEATER, Kind of like putting a 4 cylinder engine in a Ferrari... s. ps: just kidding... (or am I?) Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: INTERFACE FOR CAT CONTROLLER
--- In Repeater-Builder@yahoogroups.com, ANTHONY [EMAIL PROTECTED] wrote: DOES ANYONE KNOW HOW TO WIRE UP A CAT CONTROLLER TO A QUANTAR REAPEATER... _ You cannot replace the Quantar's internal controller which is necessary for the station to operate, however, you can interface the Quantar to external devices such as a CAT controller. That way you can get features that the Quantar does not have such as voice ID's, courtesy tones, announcements and so on. There is a tab in the Quantar service manual called System Applications that shows how to make the connections for PTT, COR, Rx and Tx audio. To do this, the Quantar must have a wireline interface board installed. This also presumes that you are talking about analog only operation. If you want to do P25 digital or mixed-mode operation, you will require a DIU3000 to host the interface to an axternal controller. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: INTERFACE FOR CAT CONTROLLER
--- In Repeater-Builder@yahoogroups.com, skipp025 [EMAIL PROTECTED] wrote: DOES ANYONE KNOW HOW TO WIRE UP A CAT CONTROLLER TO A QUANTAR REAPEATER, Kind of like putting a 4 cylinder engine in a Ferrari... s. ps: just kidding... (or am I?) lol be hard work to setup ! Thanks AP. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: INTERFACE FOR CAT CONTROLLER
That's not a very nice thing to say about a Quantar! :-) Mike skipp025 wrote: DOES ANYONE KNOW HOW TO WIRE UP A CAT CONTROLLER TO A QUANTAR REAPEATER, Kind of like putting a 4 cylinder engine in a Ferrari... s. ps: just kidding... (or am I?) Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: INTERFACE FOR CAT CONTROLLER
You can also use the MRTI connector and program the Quantar to give MRTI priority and be a base not a repeater. All signals are present on the DB25 on the rear of the chassis. The other way is by using the 50 pin telco connector on the rear and having the Wildcard option installed which is on or part of the Wireline Interfaceboard Also as NJ902 says, if your are wanting to pass or do P25 you use the DIU3000 between the Quantar and the external controller... Hope this helps... Bryon K0BSJ At 02:08 PM 4/11/2006, you wrote: --- In Repeater-Builder@yahoogroups.com, ANTHONY [EMAIL PROTECTED] wrote: DOES ANYONE KNOW HOW TO WIRE UP A CAT CONTROLLER TO A QUANTAR REAPEATER... _ You cannot replace the Quantar's internal controller which is necessary for the station to operate, however, you can interface the Quantar to external devices such as a CAT controller. That way you can get features that the Quantar does not have such as voice ID's, courtesy tones, announcements and so on. There is a tab in the Quantar service manual called System Applications that shows how to make the connections for PTT, COR, Rx and Tx audio. To do this, the Quantar must have a wireline interface board installed. This also presumes that you are talking about analog only operation. If you want to do P25 digital or mixed-mode operation, you will require a DIU3000 to host the interface to an axternal controller. Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
