*IF* you're working with really good signal levels...
simplify the clutter... daisy-chain 'em like an old ethernet setup.
Tee's right on each RX input (except the last), & odd-QW jumpers between.
[ ANT->--(T)-(T)-(T)-(rx) ]
RG58 worked fine for us.
Al Wolfe wrote:
One common method of combining two receivers is to use a coax tee at the
antenna feedline and 1/4 wave pieces of 75 ohm coax from the tee to each
receiver. This can be expanded to four receivers using six pieces of 75 ohm
coax, but probably isn't worth the effort.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/