Re: [Repeater-Builder] Switching PL on and of on a TS-32
Seems like there is a control line on the ts32 board audio buffer that can be tied to detect line to gate audio.On 3/19/06, John J. Riddell [EMAIL PROTECTED] wrote:I had a similar problem here and I put a relay on the audio line that shorts theaudio outputwhen COS drops.works great.John VE3AMZ- Original Message -From: Jim Cicirello [EMAIL PROTECTED]To: Repeater-Builder@yahoogroups.comSent: Sunday, March 19, 2006 4:13 PMSubject: RE: [Repeater-Builder] Switching PL on and of on a TS-32 I had a similar problem when my TS-32, only mine made a noise when the PL first was switched on. I also wanted the PL to follow the CAS so there was no PL on the repeater tail. I turned my TS-32 on all the time and switched the CTCSS in and out with a 2n Transistor driving a Mini Relay. It works great. Good Luck.KA2AJHJimWellsville, NY Jim KA2AJHWellsville, N.Y. -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:Repeater-Builder@yahoogroups.com] On Behalf Of Joe Sent: Sunday, March 19, 2006 2:13 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Switching PL on and of on a TS-32 I decided to try the method someone suggested for keying the repeater transmitter encode PL on and off with active COS.I switched the ground connection on and off to key the TS-32 PL deck.This works, except that when the tone turns off I get a sound that is best described as squeege as it shuts off.I assume this is the oscillator loosing voltage and the tone changing frequency.Anybody else have this problem?I'm about to just go back to switching the PL audio line and leaving the TS-32 on all the time.. 73, Joe, K1ike Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links* To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to:[EMAIL PROTECTED]* Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/-- DE NU5D - Promote Amateur Radio YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Re: [Repeater-Builder] Switching PL on and of on a TS-32
I once wired a diode to one of the switch positions to CHANGE the tone during COS - similar to reverse burst, except now a totally different tone - made the receivers quench nicely.Steve NU5D On 3/19/06, Chuck Kelsey [EMAIL PROTECTED] wrote: That's what I do -- gate the audio line. I usually use a 4066. Becareful on the levels because the 4066 can cause distortion if hit toohard. Some controllers will gate it for you, but not sure what ones do(LinkCom doesn't). ChuckWB2EDVJoe wrote: I decided to try the method someone suggested for keying the repeater transmitter encode PL on and off with active COS.I switched the ground connection on and off to key the TS-32 PL deck.This works, except that when the tone turns off I get a sound that is best described as squeege as it shuts off.I assume this is the oscillator loosing voltage and the tone changing frequency.Anybody else have this problem?I'm about to just go back to switching the PL audio line and leaving the TS-32 on all the time.. 73, Joe, K1ike Yahoo! Groups Links Yahoo! Groups Links* To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/* To unsubscribe from this group, send an email to:[EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to:http://docs.yahoo.com/info/terms/-- DE NU5D - Promote Amateur Radio YAHOO! GROUPS LINKS Visit your group "Repeater-Builder" on the web. To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Repeater-Builder] Switching PL on and of on a TS-32
I decided to try the method someone suggested for keying the repeater transmitter encode PL on and off with active COS. I switched the ground connection on and off to key the TS-32 PL deck. This works, except that when the tone turns off I get a sound that is best described as squeege as it shuts off. I assume this is the oscillator loosing voltage and the tone changing frequency. Anybody else have this problem? I'm about to just go back to switching the PL audio line and leaving the TS-32 on all the time.. 73, Joe, K1ike Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Switching PL on and of on a TS-32
That's what I do -- gate the audio line. I usually use a 4066. Be careful on the levels because the 4066 can cause distortion if hit too hard. Some controllers will gate it for you, but not sure what ones do (LinkCom doesn't). Chuck WB2EDV Joe wrote: I decided to try the method someone suggested for keying the repeater transmitter encode PL on and off with active COS. I switched the ground connection on and off to key the TS-32 PL deck. This works, except that when the tone turns off I get a sound that is best described as squeege as it shuts off. I assume this is the oscillator loosing voltage and the tone changing frequency. Anybody else have this problem? I'm about to just go back to switching the PL audio line and leaving the TS-32 on all the time.. 73, Joe, K1ike Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Switching PL on and of on a TS-32
I had a similar problem when my TS-32, only mine made a noise when the PL first was switched on. I also wanted the PL to follow the CAS so there was no PL on the repeater tail. I turned my TS-32 on all the time and switched the CTCSS in and out with a 2n Transistor driving a Mini Relay. It works great. Good Luck. KA2AJH Jim Wellsville, NY Jim KA2AJH Wellsville, N.Y. -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Joe Sent: Sunday, March 19, 2006 2:13 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Switching PL on and of on a TS-32 I decided to try the method someone suggested for keying the repeater transmitter encode PL on and off with active COS. I switched the ground connection on and off to key the TS-32 PL deck. This works, except that when the tone turns off I get a sound that is best described as squeege as it shuts off. I assume this is the oscillator loosing voltage and the tone changing frequency. Anybody else have this problem? I'm about to just go back to switching the PL audio line and leaving the TS-32 on all the time.. 73, Joe, K1ike Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Switching PL on and of on a TS-32
I had a similar problem here and I put a relay on the audio line that shorts the audio output when COS drops.works great. John VE3AMZ - Original Message - From: Jim Cicirello [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, March 19, 2006 4:13 PM Subject: RE: [Repeater-Builder] Switching PL on and of on a TS-32 I had a similar problem when my TS-32, only mine made a noise when the PL first was switched on. I also wanted the PL to follow the CAS so there was no PL on the repeater tail. I turned my TS-32 on all the time and switched the CTCSS in and out with a 2n Transistor driving a Mini Relay. It works great. Good Luck. KA2AJH Jim Wellsville, NY Jim KA2AJH Wellsville, N.Y. -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Joe Sent: Sunday, March 19, 2006 2:13 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Switching PL on and of on a TS-32 I decided to try the method someone suggested for keying the repeater transmitter encode PL on and off with active COS. I switched the ground connection on and off to key the TS-32 PL deck. This works, except that when the tone turns off I get a sound that is best described as squeege as it shuts off. I assume this is the oscillator loosing voltage and the tone changing frequency. Anybody else have this problem? I'm about to just go back to switching the PL audio line and leaving the TS-32 on all the time.. 73, Joe, K1ike Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
