Re: [Repeater-Builder] Tinkering with Repeater Controller firmware - source code
Best I can tell the original code was written in assembler on an IMASI 8080 with a development system of some kind. Last I checked the source code from Link Communications was not available. On Tue, Jul 13, 2010 at 4:12 PM, wrote: > At 7/12/2010 20:56, you wrote: > >> > "Jeff Lavoie - KB1SPH/WQEX694" wrote: >> > Ok, I can get you the date code tomorrow if you find some >> > spare time to check. It's too bad I couldn't get a copy >> > of the original code and maybe modify it myself. I like >> > to tinker around with existing programming a bit, >> > but I wouldn't know where to begin if I were to start >> > from scratch. >> > Jeff, KB1SPH / WQEX694 >> >>I have to look at whet ever the processor is to comment on >>modifying the code. I'm reversing out the source code for >>one of the ACC Repeater Controllers and it's not for the >>casual person to attempt. At 443 pages of disassembled source >>code I'd say you really have to want to do something like this. >>And I'm doing it for fun... > > Was the original code done in an assembler (my guess, given the > vintage)? Have you asked Link Comm if by chance they have any source code? > > Bob NO6B > > > > > > > > Yahoo! Groups Links > > > >
Re: [Repeater-Builder] Tinkering with Repeater Controller firmware - source code
At 7/12/2010 20:56, you wrote: > > "Jeff Lavoie - KB1SPH/WQEX694" wrote: > > Ok, I can get you the date code tomorrow if you find some > > spare time to check. It's too bad I couldn't get a copy > > of the original code and maybe modify it myself. I like > > to tinker around with existing programming a bit, > > but I wouldn't know where to begin if I were to start > > from scratch. > > Jeff, KB1SPH / WQEX694 > >I have to look at whet ever the processor is to comment on >modifying the code. I'm reversing out the source code for >one of the ACC Repeater Controllers and it's not for the >casual person to attempt. At 443 pages of disassembled source >code I'd say you really have to want to do something like this. >And I'm doing it for fun... Was the original code done in an assembler (my guess, given the vintage)? Have you asked Link Comm if by chance they have any source code? Bob NO6B
[Repeater-Builder] Tinkering with Repeater Controller firmware - source code
> "Jeff Lavoie - KB1SPH/WQEX694" wrote: > Ok, I can get you the date code tomorrow if you find some > spare time to check. It's too bad I couldn't get a copy > of the original code and maybe modify it myself. I like > to tinker around with existing programming a bit, > but I wouldn't know where to begin if I were to start > from scratch. > Jeff, KB1SPH / WQEX694 I have to look at whet ever the processor is to comment on modifying the code. I'm reversing out the source code for one of the ACC Repeater Controllers and it's not for the casual person to attempt. At 443 pages of disassembled source code I'd say you really have to want to do something like this. And I'm doing it for fun... Not many people want to have this kind of fun... I'm sure the source code for the CSI-32 Tone Panel is just as exciting. s.